scholarly journals Tunable Temperature Characteristic of Terahertz Bragg Fiber Filled with Liquid Water

2021 ◽  
Vol 11 (18) ◽  
pp. 8306
Author(s):  
Cuijuan Guo ◽  
Mengya Su ◽  
Jia Shi ◽  
Linlin Tian ◽  
Wei Xu ◽  
...  
Keyword(s):  
Liquid Water ◽  
Low Frequency ◽  
Functional Materials ◽  
Temperature Characteristic ◽  
Defect Layer ◽  
Confinement Loss ◽  
Hollow Core ◽  
The Finite Element Method ◽  
Bragg Fiber ◽  
Potential Applications

Hollow-core terahertz (THz) fibers have attracted a lot of research interest due to the low loss and easy inner modification with functional materials. Liquid water has unique properties in the THz region and has been widely investigated in THz emission, sensing, and devices. In this paper, a hollow-core THz Bragg fiber with a water defect layer is proposed. The finite element method is used to verify and analyze the tunable temperature characteristic of the water-filled THz fiber. The numerical analysis results show that the confinement loss and the low-frequency side of the dip near 0.5 THz can be controlled by the temperature of the liquid water. The temperature sensitivity of the THz fiber is obtained at 0.09614 dB·m−1/K at 0.45 THz with a high core power fraction up to 98%. The proposed THz fiber has potential applications in THz interaction with liquid and THz tunable devices.

Single-polarization single-mode hollow-core negative curvature fiber with nested U-type cladding elements

2021 ◽  
Author(s):  
Qiwei Wang ◽  
Shi Qiu ◽  
Jinhui Yuan ◽  
Guiyao Zhou ◽  
Changming Xia ◽  
...  
Keyword(s):  
Negative Curvature ◽  
Extinction Ratio ◽  
Single Mode ◽  
High Order Mode ◽  
Confinement Loss ◽  
Structure Parameters ◽  
Hollow Core ◽  
Propagation Characteristics ◽  
Potential Applications ◽  
Single Polarization

Abstract Hollow-core negative curvature fibers (HC-NCFs) have become one of the research hotspots in the field of optical fiber because of its potential applications in the data and energy transmissions. In this paper, a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed. To achieve the single-polarization single-mode transmission, we use two different silica tube thicknesses that satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes, respectively. Besides, the elliptical elements are introduced to achieve good single-mode performance. By studying the influences of the structure parameters on the propagation characteristics, the optimized structure parameters are obtained. The simulation results show that when the wavelength is located at 1550 nm, the single-polarization single-mode transmission is achieved, along with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174. Furthermore, the confinement loss is only 0.0015 dB/m.

scholarly journals Theoretical Analysis of Terahertz Dielectric–Loaded Graphene Waveguide

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 210
Author(s):  
Da Teng ◽  
Kai Wang
Keyword(s):  
Photonic Devices ◽  
Effective Index ◽  
The Finite Element Method ◽  
Index Method ◽  
Modal Properties ◽  
Terahertz Region ◽  
Effective Index Method ◽  
Integration Density ◽  
Device Integration ◽  
Potential Applications

The waveguiding of terahertz surface plasmons by a GaAs strip-loaded graphene waveguide is investigated based on the effective-index method and the finite element method. Modal properties of the effective mode index, modal loss, and cut-off characteristics of higher order modes are investigated. By modulating the Fermi level, the modal properties of the fundamental mode could be adjusted. The accuracy of the effective-index method is verified by a comparison between the analytical results and numerical simulations. Besides the modal properties, the crosstalk between the adjacent waveguides, which determines the device integration density, is studied. The findings show that the effective-index method is highly valid for analyzing dielectric-loaded graphene plasmon waveguides in the terahertz region and may have potential applications in subwavelength tunable integrated photonic devices.

scholarly journals Geometrical Scaling of Antiresonant Hollow-Core Fibers for Mid-Infrared Beam Delivery

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 420
Author(s):  
Ang Deng ◽  
Wonkeun Chang
Keyword(s):  
Structural Parameters ◽  
Transmission Band ◽  
Confinement Loss ◽  
Hollow Core ◽  
Core Size ◽  
Core Diameter ◽  
Mid Infrared ◽  
The Core ◽  
Tubular Type ◽  
Beam Delivery

We numerically investigate the effect of scaling two key structural parameters in antiresonant hollow-core fibers—dielectric wall thickness of the cladding elements and core size—in view of low-loss mid-infrared beam delivery. We demonstrate that there exists an additional resonance-like loss peak in the long-wavelength limit of the first transmission band in antiresonant hollow-core fibers. We also find that the confinement loss in tubular-type hollow-core fibers depends strongly on the core size, where the degree of the dependence varies with the cladding tube size. The loss scales with the core diameter to the power of approximately −5.4 for commonly used tubular-type hollow-core fiber designs.

scholarly journals Characteristic Analysis and Structural Design of Hollow-Core Photonic Crystal Fibers with Band Gap Cladding Structures

Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 284
Author(s):  
Bowei Wan ◽  
Lianqing Zhu ◽  
Xin Ma ◽  
Tianshu Li ◽  
Jian Zhang
Keyword(s):  
Photonic Crystal ◽  
Band Gap ◽  
Photonic Crystal Fibers ◽  
Relative Sensitivity ◽  
Confinement Loss ◽  
Hollow Core ◽  
Characteristic Analysis ◽  
Element Analysis ◽  
The Core ◽  
Crystal Fibers

Due to their flexible structure and excellent optical characteristics hollow-core photonic crystal fibers (HC-PCFs) are used in many fields, such as active optical devices, communications, and optical fiber sensing. In this paper, to analyze the characteristics of HC-PCFs, we carried out finite element analysis and analyzed the design for the band gap cladding structure of HC-PCFs. First, the characteristics of HC19-1550 and HC-1550-02 in the C-band were simulated. Subsequently, the structural optimization of the seven-cell HC-1550-02 and variations in characteristics of the optimized HC-1550-02 in the wavelength range 1250–1850 nm were investigated. The simulation results revealed that the optimal number of cladding layers is eight, the optimal core radius is 1.8 times the spacing of adjacent air holes, and the optimal-relative thickness of the core quartz-ring is 2.0. In addition, the low confinement loss bandwidth of the optimized structure is 225 nm. Under the transmission bandwidth of the optimized structure, the core optical power is above 98%, the confinement loss is below 9.0 × 10−3 dB/m, the variation range of the effective mode field area does not exceed 10 μm2, and the relative sensitivity is above 0.9570. The designed sensor exhibits an ultra-high relative sensitivity and almost zero confinement loss, making it highly suitable for high-sensitivity gas or liquid sensing.

Fish Attraction with Pulsed Low-Frequency Sound

1968 ◽  
Vol 25 (7) ◽  
pp. 1441-1452 ◽  
Author(s):  
Joseph D. Richard
Keyword(s):  
Acoustic Stimulus ◽  
Low Frequency ◽  
Reef Fishes ◽  
Test Site ◽  
Acoustic Signals ◽  
Commercial Fisheries ◽  
Test Results ◽  
Potential Applications ◽  
Predatory Fishes ◽  
Underwater Television

A series of tests were conducted to determine the effectiveness of pulsed low-frequency acoustic signals for attracting fishes. The acoustic signals were contrived to simulate the hydrodynamically generated disturbances normally associated with active predation. Underwater television was used to observe fish arrivals during both control and test periods. Demersal predatory fishes were successfully attracted although they habituated rapidly to the acoustic stimulus. Members of the families Serranidae, Lutjanidae, and Pomadasyidae were particularly well represented among the fishes attracted. Sharks were also attracted in considerable numbers. Herbivorous reef fishes, although common around the test site, were not attracted. Possible relationships between the test results and the hearing capabilities of fishes are discussed. It is concluded that acoustic attraction techniques have potential applications in certain existing commercial fisheries.

scholarly journals Dynamic Line Rating—An Effective Method to Increase the Safety of Power Lines

2021 ◽  
Vol 11 (2) ◽  
pp. 492
Author(s):  
Levente Rácz ◽  
Bálint Németh
Keyword(s):  
Expert System ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Power Line ◽  
Power Lines ◽  
Design Parameters ◽  
Monitoring Methods ◽  
Limit Value ◽  
Potential Applications

Exceeding the electric field’s limit value is not allowed in the vicinity of high-voltage power lines because of both legal and safety aspects. The design parameters of the line must be chosen so that such cases do not occur. However, analysis of several operating power lines in Europe found that the electric field strength in many cases exceeds the legally prescribed limit for the general public. To illustrate this issue and its importance, field measurement and finite element simulation results of the low-frequency electric field are presented for an active 400 kV power line. The purpose of this paper is to offer a new, economical expert system based on dynamic line rating (DLR) that utilizes the potential of real-time power line monitoring methods. The article describes the expert system’s strengths and benefits from both technical and financial points of view, highlighting DLR’s potential for application. With our proposed expert system, it is possible to increase a power line’s safety and security by ensuring that the electric field does not exceed its limit value. In this way, the authors demonstrate that DLR has other potential applications in addition to its capacity-increasing effect in the high voltage grid.

scholarly journals A Metawindow with Optimised Acoustic and Ventilation Performance

2021 ◽  
Vol 11 (7) ◽  
pp. 3168
Author(s):  
Gioia Fusaro ◽  
Xiang Yu ◽  
Zhenbo Lu ◽  
Fangsen Cui ◽  
Jian Kang
Keyword(s):  
Natural Ventilation ◽  
Noise Control ◽  
Fem Analysis ◽  
The Finite Element Method ◽  
Noise Mitigation ◽  
Acoustic Performance ◽  
Potential Applications ◽  
Ventilation Performance ◽  
Sound Reduction ◽  
Window Design

Crucial factors in window performance, such as natural ventilation and noise control, are generally conceived separately, forcing users to choose one over the other. To solve this dualism, this study aimed to develop an acoustic metamaterial (AMM) ergonomic window design to allow noise control without dependence on the natural ventilation duration and vice versa. First, the finite element method (FEM) was used to investigate the noise control performance of the acoustic metawindow (AMW) unit, followed by anechoic chamber testing, which also served as the validation of the FEM models. Furthermore, FEM analysis was used to optimise the acoustic performance and assess the ventilation potential. The numerical and experimental results exhibited an overall mean sound reduction of 15 dB within a bandwidth of 380 to 5000 Hz. A good agreement between the measured and numerical results was obtained, with a mean variation of 30%. Therefore, the AMW unit optimised acoustic performance, resulting in a higher noise reduction, especially from 50 to 500 Hz. Finally, most of the AMW unit configurations are suitable for natural ventilation, and a dynamic tuned ventilation capacity can be achieved for particular ranges by adjusting the window’s ventilation opening. The proposed designs have potential applications in building acoustics and engineering where natural ventilation and noise mitigation are required to meet regulations simultaneously.

Self-assembly mode and supramolecular framework of cyclopentanocucurbit[6]uril and aromatic amines

2021 ◽  
Vol 25 ◽  
Author(s):  
Jun Zheng ◽  
Yan Mei Jin ◽  
Xi Nan Yang ◽  
Lin Zhang ◽  
Dao Fa Jiang ◽  
...  
Keyword(s):  
Self Assembly ◽  
Functional Materials ◽  
Supramolecular Interactions ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
Characterization Methods ◽  
Potential Applications ◽  
Non Covalent Interactions ◽  
Multi Level ◽  
Covalent Interactions

: Single-crystal X-ray diffraction analysis, nuclear magnetic resonance (NMR), and other characterization methods are used to characterize the complexes formed by cyclopentano-cucurbit[6]uril (abbreviated as CyP6Q[6]) as a host interacting with p-aminobenzenesulfonamide (G1), 4,4'-diaminobiphenyl (G2), and (E)-4,4'-diamino-1,2-diphenylethene (G3) as guests, respectively. The experimental results show that these three aromatic amine molecules have the same interaction mode with CyP6Q[6], interacting with its negatively electric potential portals. The supramolecular interactions include non-covalent interactions of hydrogen bonding and ion-dipole between host and guest molecules. CdCl2 acts as a structureinducing agent to form self-assemblies of multi-dimensional and multi-level supramolecular frameworks that may have potential applications in various functional materials.

Sign in / Sign up

Export Citation Format

Share Document