Low-cost solar technologies for arsenic removal in drinking water

2010 ◽  
pp. 237-246
Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1323 ◽  
Author(s):  
TA Siddique ◽  
Naba K. Dutta ◽  
Namita Roy Choudhury

Arsenic (As) removal is of major significance because inorganic arsenic is highly toxic to all life forms, is a confirmed carcinogen, and is of significant environmental concern. As contamination in drinking water alone threatens more than 150 million people all over the world. Therefore, several conventional methods such as oxidation, coagulation, adsorption, etc., have been implemented for As removal, but due to their cost-maintenance limitations; there is a drive for advanced, low cost nanofiltration membrane-based technology. Thus, in order to address the increasing demand of fresh and drinking water, this review focuses on advanced nanofiltration (NF) strategy for As removal to safeguard water security. The review concentrates on different types of NF membranes, membrane fabrication processes, and their mechanism and efficiency of performance for removing As from contaminated water. The article provides an overview of the current status of polymer-, polymer composite-, and polymer nanocomposite-based NF membranes, to assess the status of nanomaterial-facilitated NF membranes and to incite progress in this area. Finally, future perspectives and future trends are highlighted.


Author(s):  
María de Boggio ◽  
Iivana Levy ◽  
Miguel Mateu ◽  
Jorge Meichtry ◽  
Silvia Farías ◽  
...  

2021 ◽  
Vol 14 ◽  
pp. 100585
Author(s):  
Amalia Lara Bursztyn Fuentes ◽  
Facundo Barraqué ◽  
Roberto Carlos Mercader ◽  
Alberto Néstor Scian ◽  
María Luciana Montes

2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Adam Teusner ◽  
Rhett Butler ◽  
Pierre Le Clech

Fluoride concentrations in drinking water in excess of 1.5 mg L-1 are unsafe for human consumption. To reduce excess fluoride intake, developing countries must use low-cost, point-of-use defluoridation techniques. Although previous work has extensively assessed defluoridation using bone char (BC), most of the advanced studies have been based on the use of fluoridated distilled water as a feed solution. In the present study, BC columns were challenged with a range of model solutions, mimicking various pretreatment options. As a result, the relative impact of dissolved organic carbon (DOC) and suspended solids (SS) on the performance of BC filters was assessed. In addition, the performance of a gravity-driven, hollow fibre ultrafiltration (UF) module was examined with regards to the potential for use as a pretreatment option. SS were observed to severely clog the columns and cause the complete cessation of flow. The subsequent removal of SS by UF improved the general filter performance as well as increasing the BC lifetime by 50 %. The UF module achieved a reduction in DOC of 34 ± 6 %, resulting in an additional 30 % increase in the lifetime of the BC column.


Sign in / Sign up

Export Citation Format

Share Document