Low cost adsorbent to reduce disinfection by-products from drinking water in small communities

2015 ◽  
pp. 99-104
Author(s):  
T Husain ◽  
M Ahmad
Keyword(s):  
Drinking Water ◽  
Low Cost ◽  
Small Communities ◽  
By Products

scholarly journals Fe0/H2O Filtration Systems for Decentralized Safe Drinking Water: Where to from Here?

Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 429 ◽  
Author(s):  
Charles Nanseu-Njiki ◽  
Willis Gwenzi ◽  
Martin Pengou ◽  
Mohammad Rahman ◽  
Chicgoua Noubactep
Keyword(s):  
Drinking Water ◽  
Low Income ◽  
Universal Access ◽  
Low Cost ◽  
Low Income Countries ◽  
Future Research ◽  
Systematic Research ◽  
Safe Drinking Water ◽  
Iron Corrosion ◽  
Small Communities

Inadequate access to safe drinking water is one of the most pervasive problems currently afflicting the developing world. Scientists and engineers are called to present affordable but efficient solutions, particularly applicable to small communities. Filtration systems based on metallic iron (Fe0) are discussed in the literature as one such viable solution, whether as a stand-alone system or as a complement to slow sand filters (SSFs). Fe0 filters can also be improved by incorporating biochar to form Fe0-biochar filtration systems with potentially higher contaminant removal efficiencies than those based on Fe0 or biochar alone. These three low-cost and chemical-free systems (Fe0, biochar, SSFs) have the potential to provide universal access to safe drinking water. However, a well-structured systematic research is needed to design robust and efficient water treatment systems based on these affordable filter materials. This communication highlights the technology being developed to use Fe0-based systems for decentralized safe drinking water provision. Future research directions for the design of the next generation Fe0-based systems are highlighted. It is shown that Fe0 enhances the efficiency of SSFs, while biochar has the potential to alleviate the loss of porosity and uncertainties arising from the non-linear kinetics of iron corrosion. Fe0-based systems are an affordable and applicable technology for small communities in low-income countries, which could contribute to attaining self-reliance in clean water supply and universal public health.

Temporal variability of disinfection by-products concentration in urban public water system

2013 ◽  
Vol 14 (4) ◽  
pp. 393-398
Keyword(s):  
Drinking Water ◽  
Water Samples ◽  
Temporal Variability ◽  
Water System ◽  
The Other ◽  
Major Constituent ◽  
System P ◽  
Public Water System ◽  
Drinking Water Samples ◽  
By Products

The occurrence of trihalomethanes (THMs) was studied in the drinking water samples from urban water supply network of Karachi city that served more than 18 million people. Drinking water samples were collected from 58 locations in summer (May-August) and winter (November-February) seasons. The major constituent of THMs detected was chloroform in winter (92.34%) and summer (93.07%), while the other THMs determined at lower concentrations. Summer and winter concentrations of total THMs at places exceed the levels regulated by UEPA (80 μg l-1) and WHO (100 μg l-1). GIS linked temporal variability in two seasons showed significantly higher median concentration (2.5%-23.06%) of THMs compared to winter.

Understanding the Role of Chlorine and Ozone to Control Postharvest Diseases in Fruit and Vegetables: A Review

2020 ◽  
Vol 16 (4) ◽  
pp. 455-461
Author(s):  
Gabriela M. Baia ◽  
Otniel Freitas-Silva ◽  
Murillo F. Junior
Keyword(s):  
Chlorine Dioxide ◽  
Broad Spectrum ◽  
Fruits And Vegetables ◽  
Low Cost ◽  
Residual Effects ◽  
Pathogenic Microorganisms ◽  
Postharvest Diseases ◽  
Post Harvest ◽  
By Products

Fruits and vegetables are foods that come into contact with various types of microorganisms from planting to their consumption. A lack or poor sanitation of these products after harvest can cause high losses due to deterioration and/ or pathogenic microorganisms. There are practically no post-harvest fungicides or bactericides with a broad spectrum of action that have no toxic residual effects and are safe. However, to minimize such problems, the use of sanitizers is an efficient device against these microorganisms. Chlorine is the most prevalent sanitizing agent because of its broad spectrum, low cost and well-established practices. However, the inevitable formation of disinfection by-products, such as trihalomethanes (THMs) and haloacetic acids (HAAs), is considered one of the main threats to food safety. Alternative sanitizers, such as chlorine dioxide (ClO2) and ozone, are becoming popular as a substitute for traditional post-harvest treatments. Thus, this review addresses the use of chlorine, chlorine dioxide and ozone emphasizing aspects, such as usage, safe application, spectrum of action and legislation. In order to ensure the quality and safety of final products, the adoption of well-prepared sanitation and sanitation programs for post-harvest fruits and vegetables is essential.

scholarly journals Monomers, Materials and Energy from Coffee By-Products: A Review

2021 ◽  
Vol 13 (12) ◽  
pp. 6921
Author(s):  
Laura Sisti ◽  
Annamaria Celli ◽  
Grazia Totaro ◽  
Patrizia Cinelli ◽  
Francesca Signori ◽  
...  
Keyword(s):  
Circular Economy ◽  
Food Industry ◽  
Food Packaging ◽  
Low Cost ◽  
Biofuel Production ◽  
Material Technology ◽  
Coffee Production ◽  
Coffee Pulp ◽  
Coffee Waste ◽  
By Products

In recent years, the circular economy and sustainability have gained attention in the food industry aimed at recycling food industrial waste and residues. For example, several plant-based materials are nowadays used in packaging and biofuel production. Among them, by-products and waste from coffee processing constitute a largely available, low cost, good quality resource. Coffee production includes many steps, in which by-products are generated including coffee pulp, coffee husks, silver skin and spent coffee. This review aims to analyze the reasons why coffee waste can be considered as a valuable source in recycling strategies for the sustainable production of bio-based chemicals, materials and fuels. It addresses the most recent advances in monomer, polymer and plastic filler productions and applications based on the development of viable biorefinery technologies. The exploration of strategies to unlock the potential of this biomass for fuel productions is also revised. Coffee by-products valorization is a clear example of waste biorefinery. Future applications in areas such as biomedicine, food packaging and material technology should be taken into consideration. However, further efforts in techno-economic analysis and the assessment of the feasibility of valorization processes on an industrial scale are needed.

scholarly journals Biodegradable Chitosan Films with ZnO Nanoparticles Synthesized Using Food Industry By-Products—Production and Characterization

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 646
Author(s):  
Victor Gomes Lauriano Souza ◽  
Marta M. Alves ◽  
Catarina F. Santos ◽  
Isabel A. C. Ribeiro ◽  
Carolina Rodrigues ◽  
...  
Keyword(s):  
Zinc Oxide Nanoparticles ◽  
Food Industry ◽  
Low Cost ◽  
Young Modulus ◽  
Barrier Properties ◽  
Zno Nps ◽  
Elongation At Break ◽  
Chitosan Films ◽  
By Products ◽  
Different Levels

This work aimed to produce bionanocomposites of chitosan incorporated with zinc oxide nanoparticles (ZnO NPs) synthesized using food industry by-products and to characterize them. Such nanoparticles are highlighted due to their low cost, antimicrobial activity, accessibility, and sustainability synthesis. Four different levels of ZnO NPs (0, 0.5, 1.0, and 2.0% w/w of chitosan) were tested, and the bionanocomposites were characterized in terms of their hydrophobicity, mechanical, optical, and barrier properties. Overall, the incorporation of ZnO NPs changed the composites from brittle to ductile, with enhanced elongation at break and reduced Young Modulus and tensile strength. Thus, ZnO NPs acted as plasticizer, turning the films more flexible, due to the presence of organic compounds on the NPs. This also favored permeability of oxygen and of water vapor, but the good barrier properties were maintained. Optical properties did not change statistically with the ZnO NPs incorporation. Thus, the characterization presented in this paper may contribute to support a decision on the choice of the material’s final application.

Sign in / Sign up

Export Citation Format

Share Document