Hydraulic Jack operated Hose Crimping Machine

2015 ◽  
Vol 3 (8) ◽  
pp. 455-458
Author(s):  
Dr Dinesh Keloth Kaithari
Keyword(s):  
Literature Review ◽  
Safety Factor ◽  
Working Condition ◽  
Electrical Power ◽  
Hydraulic Jack ◽  
Critical Components ◽  
Parts Fabrication

The present paper deals with developing of a crimping machine that can crimp hydraulic hoses with its fitting without the use of electricity. Detailed literature review indicates the fabrication of crimping machine that operates with electricity that inspired the authors to develop a hydraulic crimping machine that works without electrical power. Such a crimping machine is very useful when the rig is in movement and suitable for emergency crimping work in order to avoid shutdown time.The author has used Autodesk inventor software for designing critical components of the machine and obtained safety factor more than one for all the critical components. Safety factor less than one leads to the unsafe working condition of the critical parts. Fabrication of the whole assembly has been completed successfully for the required crimping for a hose size of 19.05 mm. The crimping machine has been tested successfully for crimping the required hose size. The design of the machine can be altered so that it can accommodate different die sizes in order to crimp hoses of different sizes.

Major Factors in Rapid Prototyping of Mechanisms

2010 ◽  
Vol 443 ◽  
pp. 516-521 ◽  
Author(s):  
Yong Hua Chen ◽  
Zhe Zheng Chen
Keyword(s):  
Rapid Prototyping ◽  
Factors Affecting ◽  
Joint Design ◽  
Factors Influencing ◽  
Major Factors ◽  
Crank Mechanism ◽  
Fundamental Mechanism ◽  
Parts Fabrication

Nowadays, layer based rapid prototyping (RP) technologies have been used not only to make product prototypes but also to manufacture small batch functional parts. For RP parts fabrication, build directions play an important role. There were many reports about optimal build directions for RP part fabrication, yet factors influencing build directions of mechanism joint have not been studied. This paper will look into the factors affecting build directions of mechanisms. A slider-crank mechanism is used as an example as it is the fundamental mechanism for many machine designs. Apart from factors affecting mechanism build directions, guidelines for mechanism joint design are also discussed.

FEATURES OF PARTS FABRICATION BY USING MULTICOMPONENT RESINS BY LASER STEREOLITHOGRAPHY

2018 ◽  
pp. 31-36
Author(s):  
V.V. Vnuk ◽  
◽  
S.V. Kamayev ◽  
M.A. Markov ◽  
S.A. Cherebylo ◽  
...  
Keyword(s):  
Laser Stereolithography ◽  
Parts Fabrication

scholarly journals A hierarchical approach for metal parts fabrication

1995 ◽  
Vol 33 (5) ◽  
pp. 1257-1274 ◽  
Author(s):  
E. IAKOVOU ◽  
K. MALIK ◽  
J. A. MUCKSTADT
Keyword(s):  
Hierarchical Approach ◽  
Metal Parts ◽  
Parts Fabrication

scholarly journals Magnesium oxide and spinel parts fabrication

1978 ◽  
Author(s):  
H Sheinberg ◽  
F Gac ◽  
W Hauth
Keyword(s):  
Magnesium Oxide ◽  
Parts Fabrication

scholarly journals Analysis of the applicability of die pressing method for ring-shaped parts fabrication

2018 ◽  
Vol 224 ◽  
pp. 02074 ◽  
Author(s):  
Vladislav Lavrinenko ◽  
Anastasiya Polyakova ◽  
Artyom Polyakov
Keyword(s):  
Experimental Data ◽  
Computer Simulation ◽  
Pressing Method ◽  
Die Pressing ◽  
Research Outcome ◽  
Simulation Results ◽  
Metal Economy ◽  
Parts Fabrication

This paper analyses die pressing method used for fabrication of ring-shaped parts, which assures significant metal economy. Computer simulation results obtained with PAM-STAMP software are compared with experimental data. The research outcome is the established range of applicability of die-pressing method for manufacturing ring-shaped parts.

Vacuum Bagging: Fiberglass Parts Fabrication with Quality

2006 ◽  
Author(s):  
Leonardo Macarrão ◽  
Paulo Carlos Kaminski
Keyword(s):  
Parts Fabrication
Sign in / Sign up

Export Citation Format

Share Document