Creep-Recovery Test: A Critical Tool for Rheological Characterization of Drilling Fluids

Author(s):  
B. T. Bui ◽  
A. N. Tutuncu
Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 259 ◽  
Author(s):  
Francesca Cuomo ◽  
Martina Cofelice ◽  
Francesco Lopez

The interest toward alginate and nanoemulsion-based hydrogels is driven by the wide potential of application. These systems have been noticed in several areas, ranging from pharmaceutical, medical, coating, and food industries. In this investigation, hydrogels prepared through in situ calcium ion release, starting from lemongrass essential oil nanodispersions stabilized in alginate aqueous suspensions in the presence of the nonionic surfactant Tween 80, were evaluated. The hydrogels prepared at different concentrations of oil, alginate, and calcium were characterized through rheological tests. Flow curves demonstrate that the hydrogels share shear thinning behavior. Oscillatory tests showed that the strength of the hydrogel network increases with the crosslinker increase, and decreases at low polymer concentrations. The hydrogels were thixotropic materials with a slow time of structural restoration after breakage. Finally, by analyzing the creep recovery data, the hydrogel responses were all fitted to the Burger model. Overall, it was demonstrated that the presence of essential oil in the proposed hydrogels does not affect the mechanical characteristics of the materials, which are mainly influenced by the concentration of polymer and calcium as a crosslinker.


2017 ◽  
Vol 20 (suppl 2) ◽  
pp. 159-166 ◽  
Author(s):  
Gabriel Sahade de Souza ◽  
Samuel Luporini ◽  
Isabel Cristina Rigoli

2011 ◽  
Vol 274 ◽  
pp. 33-41 ◽  
Author(s):  
Mourad Gareche ◽  
Noureddine Zeraibi ◽  
Ahmed Allal

In this article, we demonstrate how the non ionic polymer, the polyethylene oxide (PEO) with molecular weight 6000 g/mol of varying concentration mass (0.7%, 1%, 2% et 3%) significantly alter the rheological properties (yield stress, viscosity, loss and elastic modulus) of the bentonite suspensions (6%) in the water. The different rheological tests made in simple shear and in dynamic on the ternary system (water-bentonite-PEO), showed the influence of the polymer on the rheological properties of this drilling fluid. The PEO which presents an affinity for the bentonite particles slows down the kinetic of aggregation of the clay particles. Also the analysis by X-rays diffraction on different samples revealed the intercalation of the clay platelets on one hand and the links bridges assured by the chains of polymer between bentonite particles beyond a critical concentration in PEO on the other hand. The Herschel-Bulkley rheological model is used for the correlation and the interpretation of our experimental results.


TAPPI Journal ◽  
2019 ◽  
Vol 18 (11) ◽  
pp. 641-649
Author(s):  
JOSHUA OMAMBALA ◽  
CARL MCINTYRE

The vast majority of tissue production uses creping to achieve the required set of properties on the base sheet. The Yankee coating helps to develop the desired crepe that in turn determines properties such as bulk and softness. The adhesion of the sheet to the Yankee surface is a very important characteristic to consider in achieving the desired crepe. The coating mix usually consists of the adhesive, modifier, and release. A good combination of these components is essential to achieving the desired properties of the tissue or towel, which often are determined by trials on the machine that can be time consuming and lead to costly rejects. In this paper, five compositions of an industrial Yankee coating adhesive, modifier, and release were examined rheologically. The weight ratio of the adhesive was kept constant at 30% in all five compositions and the modifier and release ratios were varied. The normal force and work done by the different compositions have been shown at various temperatures simulating that of the Yankee surface, and the oscillatory test was carried out to explain the linear and nonlinear viscoelastic characteristic of the optimal coating composition.


Author(s):  
Luiz Eduardo Rodrigues Vieira ◽  
Leonardo Rosa Ribeiro da Silva ◽  
Felipe Chagas Rodrigues de Souza ◽  
Wisley Sales ◽  
Álisson Rocha Machado

Author(s):  
Joel López Bonilla ◽  
Cesar Celis ◽  
Danmer Maza

Sign in / Sign up

Export Citation Format

Share Document