Research Committee Update

2020 ◽  
Vol 39 (11) ◽  
pp. 834-835
Author(s):  
Alexander Mihai Popovici

In the last Research Committee Update (TLE, September 2020, 681–682), I explained that the title of this column comes from a book by Charles Murray, The Curmudgeon’s Guide to Getting Ahead. With the curmudgeon still in mind, I have a few more comments to make about our lives as researchers, pushing the leading edge of technology in our industries. In small companies, it helps to be a contrarian, to develop novel algorithms in areas overlooked by large research groups or the academic groups funded by them. One such technology that our group started working on a few years ago, nudged by the research group at Saudi Aramco, is diffraction imaging (DI). Aramco was looking for a company with a good quality commercial Kirchhoff migration, since this particular DI implementation involved modifying a Kirchhoff kernel.

2006 ◽  
Vol 14 (6) ◽  
pp. 36-39
Author(s):  
Shu-You Li ◽  
Vinayak P. Dravid

Resource sharing has become an absolute necessity for modern scientific research because of the increasing expense and complexity of instruments, and the ever changing funding paradigm which often requires sharing of major instrumentation resource across multiple disciplines. Many universities and even large companies have set up centralized facilities to serve researchers from different departments, divisions and units to minimize expenses and maximizing usage.Just in the materials research area alone, it is estimated that there are more than 500 mid-size facilities existing nationwide, as reported in 2005 by the Committee on Smaller Facilities of National Research Council. Resource sharing is also common in large research groups, between Principal Investigators, as well as in corporate/industrial laboratories.


Author(s):  
Ciarán Bryce

AbstractSmall companies need help to detect and to respond to increasing security related threats. This paper presents a cloud service that automates processes that make checks for such threats, implement mitigating procedures, and generally instructs client companies on the steps to take. For instance, a process that automates the search for leaked credentials on the Dark Web will, in the event of a leak, trigger processes that instruct the client on how to change passwords and perhaps a micro-learning process on credential management. The security governance service runs on the cloud as it needs to be managed by a security expert and because it should run on an infrastructure separated from clients. It also runs as a cloud service for economy of scale: the processes it runs can service many clients simultaneously, since many threats are common to all. We also examine how the service may be used to prove to independent auditors (e.g., cyber-insurance agents) that a company is taking the necessary steps to implement its security obligations.


1998 ◽  
Vol 57 (3) ◽  
pp. 429-471
Author(s):  
Jennifer Payne

THE decision of the House of Lords in Williams v. Natural Life Health Foods Ltd. [1998] 1 W.L.R. 830, reversing the Court of Appeal's decision ([1997] 1 B.C.L.C. 131), examines the issue of an agent's liability for negligent misstatement. Of course, agents will be personally responsible for their own negligence, even if that tort is committed while on the principal's business, but what is their responsibility for the negligence of their principal? Logically the answer is “none”, and certainly in a company context statements made by directors on behalf of their companies have traditionally led to liability for the principal alone: “a company director is only to be held personally liable for the company's negligent misstatements if the plaintiffs can establish some special circumstances setting the case apart from the ordinary . . .” ([1997] 1 B.C.L.C. 131, 152 per Hirst L.J.). The Court of Appeal's decision in Williams, however, threatened to expand this category of “special circumstances” to such an extent as to make personal liability the norm for directors, at least in the context of small companies.


2008 ◽  
Vol 130 (12) ◽  
pp. 40-42
Author(s):  
Jean Thilmany

This article discusses features of enterprise resource planning (ERP) systems that aim to help small engineering firms in managing their businesses. With the proliferation of ERP systems and vendors in the past decade, the big vendors as well as a series of small and niche players are now marketing their offerings for the small-to-midsize company and for specialized companies. Small companies often find that ERP systems give them better control of inventory and production scheduling. The engineer-to-order operation has unique needs that can be met by a specialized ERP system. Jobscope, a company in Greenville, South Carolina, makes ERP software especially for small-to-midsize engineer-to-order companies. In order to serve engineer-to-order type of engineering companies, the Jobscope system stores business information on a per project rather than a company-wide basis. It is because engineer-to-order companies batch and track jobs on a project basis. The experts agree that bringing in an ERP system might seem daunting to the smaller engineering operation. However, they also agree on another thing: it can help small companies manage the complexities of growing business.


2019 ◽  
Vol 4 (1) ◽  
pp. 13-21
Author(s):  
Qurotul Aini ◽  
Anoesyirwan Anoesyirwan ◽  
Yuli Ana

A simple and secure security accounting system is a system needed by various large and small companies where of course the company is never separated from accounting in order to process financial expenditures and revenues owned by companies that have a purpose to make a profit. Efforts to achieve success in a company can be seen from financial management which can be monitored and can be managed properly so that finance can be controlled well too, for that accuracy is an important role so with the company's cloud accounting it can be easier to monitor and also manage financial well, so it will be easier to make income / loss statements. cloud accounting provides a user friendly look that can certainly facilitate users. The purpose of this study is so that companies can pay more attention to monitoring and managing finances well so that it can facilitate the making of income statement . In this study took place used observational research methods and field library studies so that the system made can meet the existing needs of the company.


2020 ◽  
Vol 3 (1) ◽  
pp. 42-50
Author(s):  
Lilik Khoiriyah ◽  
Harsono

Abstract Human resources are a significant enough part of achieving organizational goals, both large and small companies; a company has modern equipment with high technology. The purpose of understanding and studying human resource management is the knowledge needed to have analytic skills in dealing with management problems, especially in the organization's field. The role of human resources in the company is significant because as the primary driver of all activities or activities of the company in achieving its objectives, both to obtain profits and to maintain the survival of the company. The success or failure of a company in maintaining its existence starts from the human being itself in maintaining the company in maximizing its effectiveness and efficiency. Wages and work environment are factors that significantly affect employee performance. An employee who has high wages or as expected and a pleasant work environment will achieve the company's goals and objectives.


2016 ◽  
Vol 118 (9) ◽  
pp. 2126-2139 ◽  
Author(s):  
Ioannis S. Arvanitoyannis ◽  
Konstantinos Samourelis ◽  
Konstantinos V. Kotsanopoulos

Purpose The purpose of this paper is to summarize and analyse the results of several food quality and safety audits (ISO 9001, ISO 22000, ELOT 1416 and Codex Alimetarius) carried out in Greek food companies processing products of animal origin. Design/methodology/approach Specifically, both a quantitative and a qualitative review of the results were carried out. Findings It was revealed that the biggest ratio of non-conformities was recorded within the frame of ELOT 1416 standard (Greek scheme for the certification of HACCP Management Systems), or ELOT 1416 and ISO 9001 where a combination of standards was used. The highest ratio of observations was recorded against ELOT 1416 when used in combination with ISO 9001. The highest average of non-conformities per audit was recorded in meat (red meat and poultry) companies. With regards to the observations recorded, the highest average per audit was recorded in companies processing eggs. Considering the number of workers, the highest average of non-conformities per audit was observed in small companies. Research limitations/implications The limitations of the present study can be summarized into the fact that although a high number of audit reports were taken into account, an audit is an observation of the condition of a company on the day of the audit and the results can also be highly dependent on the skills of the auditors. Originality/value To the best of the authors’ knowledge this is the first paper that analyses a high number of audit reports from Greek food companies and its conclusions can be of significant value to both the auditors and the industry enabling a more focused approach in the conduction of audits and implementation of the standards.


2021 ◽  
Vol 15 (4) ◽  
pp. 387-387
Author(s):  
Takashi Matsumura ◽  
Norikazu Suzuki

In recent years, manufacturing technologies have been progressing with the high demands of industry. In the automobile and aircraft industries, for example, the manufacturing processes have been requiring for technologies that allow for high machining rates of lightweight and/or difficult-to-cut materials. Medical device production includes the machining of biocompatible materials that have high mechanical strength. Information devices require high quality in ultra-precision manufacturing processes. Measurement and characterization technologies in manufacturing have also been essential in the progress. Along with evolution of manufacturing technologies, scientific studies have been done on manufacturing phenomena and the control of processes, based on physical and/or mathematical aspects. This special issue is promoted by the International Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P2020), which was canceled to protect the health and wellness of our community from COVID-19, and by the Research Committee of Cutting Technologies in the Japan Society for Precision Engineering. This special issue includes 17 papers that detail progress and innovations in the following areas: - Characterization of materials - Fundamental study and modeling of material removal process - Manufacturing control and optimization - Manufacturing processes for new/hard materials - Micro-/Nano-scale manufacturing - Tool manufacturing and performance - Metrology and evaluation - Surface characterization This special issue also includes not only technical but also scientific discussions, suggesting new key technologies for future manufacturing. We hope this will help the readers to understand the manufacturing processes and improve their operations. We thank the authors and the reviewers for their generous cooperation and the editing staffs for their many contributions.


Author(s):  
Margit Ebbinghaus

Context: Although the German dual system of vocational education and training makes a major contribution to securing the supply of skilled workers for trade and industry, its function has been under scrutiny for several years. Companies are finding it increasingly difficult to recruit trainees, and increasing numbers of training places are vacant. However, such recruitment problems tend to be concentrated in certain occupations rather than occurring across all sectors equally. This has led to a significant increase in competition among companies seeking to secure the services of trainees in various occupations and calls into question the extent to which such fierce rivalry is reflected in the type of training marketing they conduct.  Approach: This paper investigates the training place characteristics companies communicate in their advertisements. Among these characteristics, differences exist in the general conditions of training, requirements for trainees and incentives the companies provide. Latent class analyses were used to investigate the patterns revealed in the training place characteristics and to examine if the frequency with which patterns occur correlates with whether a company is seeking trainees for an occupation with or without recruitment problems and with company size. The analyses were based on data collected from 1,939 small and medium-sized enterprises via standardised telephone interviews conducted at the beginning of 2016. The companies in question had offered training places in one of nine selected dual occupations. Four of the training occupations considered have recruitment problems. There are no recruitment difficulties in the other five.Findings: The single group latent class analysis initially conducted resulted in a model with three latent classes exhibiting clearly differentiated patterns of training place characteristics. As well as focusing on general conditions and the requirements for training, the “aggressive” pattern mainly emphasises the incentives the training place or company offered. The “requirements-oriented” pattern concentrates on the future requirements for trainees. The “basic” pattern communicates only a very few fundamental training place characteristics. A subsequent multi-group latent class analysis revealed evidence that small and medium-sized enterprises offering training are more likely to display an aggressive pattern in occupations with recruitment problems than SMEs providing training in occupations where there are no recruitment difficulties. By the same token, small and medium-sized enterprises with training provisions in occupations with recruitment problems are less likely to exhibit training marketing aligned to the requirements of applicants than firms offering training in occupations without recruitment difficulties, although this is significantly clearer amongst small companies than medium-sized companies. Nevertheless, the class with requirements-oriented marketing constitutes the largest class for all four company groups. Conclusion: The results indicate that conditions in the training market affect the training marketing companies carry out. However, they also show that companies are more likely to use their training marketing to react to recruitment problems that have already occurred rather than take a preventative approach towards such difficulties. For small companies in particular, the limitations in resources available for more elaborate training marketing likely contribute to this approach. Nevertheless, further research is needed to consolidate the outcomes identified here. 


Sign in / Sign up

Export Citation Format

Share Document