Experimental study of viscosity effects on air gun signatures

1992 ◽  
Author(s):  
J. Langhammer ◽  
M. Landrø
Geophysics ◽  
1993 ◽  
Vol 58 (12) ◽  
pp. 1801-1808 ◽  
Author(s):  
Jan Langhammer ◽  
Martin Landrø

In computer modeling of air guns the theory is often based on the assumption of an ideal freely oscillating spherical air bubble in an ideal fluid. Theoretical and experimental air‐gun signatures do not match perfectly. Synthetic signatures are under‐damped compared to real signatures. Several physical effects have been proposed as an explanation of this mismatch, among them viscosity effects. The viscosity of the surrounding liquid may contribute to the damping of the bubble oscillation. The numerical value of the viscosity of the surrounding liquid has to be increased considerably beyond the actual value of water to obtain sufficient damping of the synthetic signatures. We therefore performed an experiment to study the effect upon the pressure signature from an air gun when changing the viscosity of the surrounding medium. The motivation for the experiment was to quantify the influence of viscous terms on the output pressure waveform from an air gun. The experiment was carried out in an [Formula: see text] tank. The source was a BOLT 600 B air gun with a firing chamber of [Formula: see text] [Formula: see text]. The gun was placed at 0.5 m depth, and the hydrophone was placed 0.22 m from the gun ports. This configuration was kept constant during the experiment. We observed changes in the output pressure waveform generated by the gun at different liquid viscosities. Sets of five signatures recorded at 12 viscosity values in the range 6–723 centipoise, were analyzed. The effects on the pressure signature when increasing the viscosity of the liquid surrounding the gun are to decrease the primary to bubble ratio and the bubble period; thus, the opposite of what one should expect. We therefore conclude that viscosity is not the main physical effect that explains the damping of an air gun signature.


2000 ◽  
Vol 231 (1) ◽  
pp. 26-31 ◽  
Author(s):  
Olivier Pitois ◽  
Pascal Moucheront ◽  
Xavier Chateau

2018 ◽  
Vol 92 ◽  
pp. 270-285 ◽  
Author(s):  
Caio A.M. Cavicchio ◽  
Jorge L. Biazussi ◽  
Marcelo S. de Castro ◽  
Antonio C. Bannwart ◽  
Oscar M.H. Rodriguez ◽  
...  

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
J. J. Arnoux ◽  
G. Sutter ◽  
G. List ◽  
A. Molinari

An experimental study, including three experimental devices, is presented in order to investigate dry friction phenomena in a wide range of sliding speeds for the steel on steel contact. A ballistic setup, with an air gun launch, allows to estimate the friction coefficient between 20 m/s and 80 m/s. Tests are completed by an adaptation of the sensor on a hydraulic tensile machine (0.01 m/s to 3 m/s) and a pin-on-disk tribometer mounted on a CNC lathe (1 to 30 m/s). The interactions at the asperity scale are characterized by a white light interferometer surface analysis.


2018 ◽  
Vol 127 ◽  
pp. 539-547 ◽  
Author(s):  
Sina Abazariyan ◽  
Roohollah Rafee ◽  
Shahram Derakhshan

Author(s):  
Norio Baba ◽  
Norihiko Ichise ◽  
Syunya Watanabe

The tilted beam illumination method is used to improve the resolution comparing with the axial illumination mode. Using this advantage, a restoration method of several tilted beam images covering the full azimuthal range was proposed by Saxton, and experimentally examined. To make this technique more reliable it seems that some practical problems still remain. In this report the restoration was attempted and the problems were considered. In our study, four problems were pointed out for the experiment of the restoration. (1) Accurate beam tilt adjustment to fit the incident beam to the coma-free axis for the symmetrical beam tilting over the full azimuthal range. (2) Accurate measurements of the optical parameters which are necessary to design the restoration filter. Even if the spherical aberration coefficient Cs is known with accuracy and the axial astigmatism is sufficiently compensated, at least the defocus value must be measured. (3) Accurate alignment of the tilt-azimuth series images.


1962 ◽  
Vol 5 (4) ◽  
pp. 387-394 ◽  
Author(s):  
Bruce Quarrington ◽  
Jerome Conway ◽  
Nathan Siegel
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document