scholarly journals Seismic facies classification and identification by competitive neural networks

Geophysics ◽  
2003 ◽  
Vol 68 (6) ◽  
pp. 1984-1999 ◽  
Author(s):  
M. M. Saggaf ◽  
M. Nafi Toksöz ◽  
M. I. Marhoon
Keyword(s):  
Neural Networks ◽  
Seismic Data ◽  
Effective Means ◽  
Synthetic Data ◽  
Low Frequency ◽  
Real Data ◽  
Seismic Facies ◽  
Automatic Identification ◽  
Facies Classification ◽  
Geologic Model

We present an approach based on competitive neural networks for the classification and identification of reservoir facies from seismic data. This approach can be adapted to perform either classification of the seismic facies based entirely on the characteristics of the seismic response, without requiring the use of any well information, or automatic identification and labeling of the facies where well information is available. The former is of prime use for oil prospecting in new regions, where few or no wells have been drilled, whereas the latter is most useful in development fields, where the information gained at the wells can be conveniently extended to the interwell regions. Cross‐validation tests on synthetic and real seismic data demonstrated that the method can be an effective means of mapping the reservoir heterogeneity. For synthetic data, the output of the method showed considerable agreement with the actual geologic model used to generate the seismic data; for the real data application, the predicted facies accurately matched those observed at the wells. Moreover, the resulting map corroborates our existing understanding of the reservoir and shows substantial similarity to the low‐frequency geologic model constructed by interpolating the well information, while adding significant detail and enhanced resolution to that model.

Seismic facies classification using supervised convolutional neural networks and semisupervised generative adversarial networks

Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. O47-O58 ◽  
Author(s):  
Mingliang Liu ◽  
Michael Jervis ◽  
Weichang Li ◽  
Philippe Nivlet
Keyword(s):  
Neural Networks ◽  
Seismic Data ◽  
Hydrocarbon Exploration ◽  
Training Data ◽  
Seismic Facies ◽  
Generative Adversarial Networks ◽  
Complex Data ◽  
Facies Classification ◽  
Good Ability ◽  
Well Data

Mapping of seismic and lithologic facies from 3D reflection seismic data plays a key role in depositional environment analysis and reservoir characterization during hydrocarbon exploration and development. Although a variety of machine-learning methods have been developed to speed up interpretation and improve prediction accuracy, there still exist significant challenges in 3D multiclass seismic facies classification in practice. Some of these limitations include complex data representation, limited training data with labels, imbalanced facies class distribution, and lack of rigorous performance evaluation metrics. To overcome these challenges, we have developed a supervised convolutional neural network (CNN) and a semisupervised generative adversarial network (GAN) for 3D seismic facies classification in situations with sufficient and limited well data, respectively. The proposed models can predict 3D facies distribution based on actual well log data and core analysis, or other prior geologic knowledge. Therefore, they provide a more consistent and meaningful implication to seismic interpretation than commonly used unsupervised approaches. The two deep neural networks have been tested successfully on a realistic synthetic case based on an existing reservoir and a real case study of the F3 seismic data from the Dutch sector of the North Sea. The prediction results show that, with relatively abundant well data, the supervised CNN-based learning method has a good ability in feature learning from seismic data and accurately recovering the 3D facies model, whereas the semisupervised GAN is effective in avoiding overfitting in the case of extremely limited well data. The latter seems, therefore, particularly adapted to exploration or early field development stages in which labeled data from wells are still very scarce.

Regularization and datuming of seismic data by weighted, damped least squares

Geophysics ◽  
2006 ◽  
Vol 71 (5) ◽  
pp. U67-U76 ◽  
Author(s):  
Robert J. Ferguson
Keyword(s):  
Least Squares ◽  
Seismic Data ◽  
Synthetic Data ◽  
Real Data ◽  
Structural Data ◽  
Irregular Sampling ◽  
Data Set ◽  
Near Surface ◽  
Damped Least Squares ◽  
Wavefield Extrapolation

The possibility of improving regularization/datuming of seismic data is investigated by treating wavefield extrapolation as an inversion problem. Weighted, damped least squares is then used to produce the regularized/datumed wavefield. Regularization/datuming is extremely costly because of computing the Hessian, so an efficient approximation is introduced. Approximation is achieved by computing a limited number of diagonals in the operators involved. Real and synthetic data examples demonstrate the utility of this approach. For synthetic data, regularization/datuming is demonstrated for large extrapolation distances using a highly irregular recording array. Without approximation, regularization/datuming returns a regularized wavefield with reduced operator artifacts when compared to a nonregularizing method such as generalized phase shift plus interpolation (PSPI). Approximate regularization/datuming returns a regularized wavefield for approximately two orders of magnitude less in cost; but it is dip limited, though in a controllable way, compared to the full method. The Foothills structural data set, a freely available data set from the Rocky Mountains of Canada, demonstrates application to real data. The data have highly irregular sampling along the shot coordinate, and they suffer from significant near-surface effects. Approximate regularization/datuming returns common receiver data that are superior in appearance compared to conventional datuming.

Application of complex-trace analysis to seismic data for random-noise suppression and temporal resolution improvement

Geophysics ◽  
2006 ◽  
Vol 71 (3) ◽  
pp. V79-V86 ◽  
Author(s):  
Hakan Karsli ◽  
Derman Dondurur ◽  
Günay Çifçi
Keyword(s):  
Seismic Data ◽  
Trace Analysis ◽  
Noise Suppression ◽  
Single Channel ◽  
Random Noise ◽  
Synthetic Data ◽  
Low Frequency ◽  
Bright Spot ◽  
Phase Information ◽  
Resolution Improvement

Time-dependent amplitude and phase information of stacked seismic data are processed independently using complex trace analysis in order to facilitate interpretation by improving resolution and decreasing random noise. We represent seismic traces using their envelopes and instantaneous phases obtained by the Hilbert transform. The proposed method reduces the amplitudes of the low-frequency components of the envelope, while preserving the phase information. Several tests are performed in order to investigate the behavior of the present method for resolution improvement and noise suppression. Applications on both 1D and 2D synthetic data show that the method is capable of reducing the amplitudes and temporal widths of the side lobes of the input wavelets, and hence, the spectral bandwidth of the input seismic data is enhanced, resulting in an improvement in the signal-to-noise ratio. The bright-spot anomalies observed on the stacked sections become clearer because the output seismic traces have a simplified appearance allowing an easier data interpretation. We recommend applying this simple signal processing for signal enhancement prior to interpretation, especially for single channel and low-fold seismic data.

Characterization of a carbonate geothermal reservoir using rock-physics-guided deep neural networks

2021 ◽  
Vol 40 (10) ◽  
pp. 751-758
Author(s):  
Fabien Allo ◽  
Jean-Philippe Coulon ◽  
Jean-Luc Formento ◽  
Romain Reboul ◽  
Laure Capar ◽  
...  
Keyword(s):  
Neural Networks ◽  
Seismic Data ◽  
Deep Neural Networks ◽  
Synthetic Data ◽  
Rock Physics ◽  
Seismic Inversion ◽  
Geothermal Reservoir ◽  
Rock Properties ◽  
Hybrid Techniques ◽  
Geothermal Wells

Deep neural networks (DNNs) have the potential to streamline the integration of seismic data for reservoir characterization by providing estimates of rock properties that are directly interpretable by geologists and reservoir engineers instead of elastic attributes like most standard seismic inversion methods. However, they have yet to be applied widely in the energy industry because training DNNs requires a large amount of labeled data that is rarely available. Training set augmentation, routinely used in other scientific fields such as image recognition, can address this issue and open the door to DNNs for geophysical applications. Although this approach has been explored in the past, creating realistic synthetic well and seismic data representative of the variable geology of a reservoir remains challenging. Recently introduced theory-guided techniques can help achieve this goal. A key step in these hybrid techniques is the use of theoretical rock-physics models to derive elastic pseudologs from variations of existing petrophysical logs. Rock-physics theories are already commonly relied on to generalize and extrapolate the relationship between rock and elastic properties. Therefore, they are a useful tool to generate a large catalog of alternative pseudologs representing realistic geologic variations away from the existing well locations. While not directly driven by rock physics, neural networks trained on such synthetic catalogs extract the intrinsic rock-physics relationships and are therefore capable of directly estimating rock properties from seismic amplitudes. Neural networks trained on purely synthetic data are applied to a set of 2D poststack seismic lines to characterize a geothermal reservoir located in the Dogger Formation northeast of Paris, France. The goal of the study is to determine the extent of porous and permeable layers encountered at existing geothermal wells and ultimately guide the location and design of future geothermal wells in the area.

Applications of Artificial Neural Networks for Seismic Facies Classification

2021 ◽  
Vol 73 (02) ◽  
pp. 68-69
Author(s):  
Chris Carpenter
Keyword(s):  
Neural Network ◽  
Seismic Data ◽  
Reservoir Characterization ◽  
Probabilistic Neural Network ◽  
Oil Field ◽  
Seismic Facies ◽  
Data Set ◽  
Full Field ◽  
Facies Classification

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 200577, “Applications of Artificial Neural Networks for Seismic Facies Classification: A Case Study From the Mid-Cretaceous Reservoir in a Supergiant Oil Field,” by Ali Al-Ali, Karl Stephen, SPE, and Asghar Shams, Heriot-Watt University, prepared for the 2020 SPE Europec featured at the 82nd EAGE Conference and Exhibition, originally scheduled to be held in Amsterdam, 1-3 December. The paper has not been peer reviewed. Facies classification using data from sources such as wells and outcrops cannot capture all reservoir characterization in the interwell region. Therefore, as an alternative approach, seismic facies classification schemes are applied to reduce the uncertainties in the reservoir model. In this study, a machine-learning neural network was introduced to predict the lithology required for building a full-field Earth model for carbonate reservoirs in southern Iraq. The work and the methodology provide a significant improvement in facies classification and reveal the capability of a probabilistic neural network technique. Introduction The use of machine learning in seismic facies classification has increased gradually during the past decade in the interpretation of 3D and 4D seismic volumes and reservoir characterization work flows. The complete paper provides a literature review regarding this topic. Previously, seismic reservoir characterization has revealed the heterogeneity of the Mishrif reservoir and its distribution in terms of the pore system and the structural model. However, the main objective of this work is to classify and predict the heterogeneous facies of the carbonate Mishrif reservoir in a giant oil field using a multilayer feed-forward network (MLFN) and a probabilistic neural network (PNN) in nonlinear facies classification techniques. A related objective was to find any domain-specific causal relationships among input and output variables. These two methods have been applied to classify and predict the presence of different facies in Mishrif reservoir rock types. Case Study Reservoir and Data Set Description. The West Qurna field is a giant, multibillion-barrel oil field in the southern Mesopotamian Basin with multiple carbonate and clastic reservoirs. The overall structure of the field is a north/south trending anticline steep on the western flank and gentle on the eastern flank. Many producing reservoirs developed in this oil field; however, the Mid- Cretaceous Mishrif reservoir is the main producing reservoir. The reservoir consists of thick carbonate strata (roughly 250 m) deposited on a shallow water platform adjacent to more-distal, deeper-water nonreservoir carbonate facies developing into three stratigraphic sequence units in the second order. Mishrif facies are characterized by a porosity greater than 20% and large permeability contrast from grainstones to microporosity (10-1000 md). The first full-field 3D seismic data set was achieved over 500 km2 during 2012 and 2013 in order to plan the development of all field reservoirs. A de-tailed description of the reservoir has been determined from well logs and core and seismic data. This study is mainly based on facies log (22 wells) and high-resolution 3D seismic volume to generate seismic attributes as the input data for the training of the neural network model. The model is used to evaluate lithofacies in wells without core data but with appropriate facies logs. Also, testing was carried out in parallel with the core data to verify the results of facies classification.

scholarly journals Nonequispaced curvelet transform for seismic data reconstruction: A sparsity-promoting approach

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. WB203-WB210 ◽  
Author(s):  
Gilles Hennenfent ◽  
Lloyd Fenelon ◽  
Felix J. Herrmann
Keyword(s):  
Seismic Data ◽  
First Generation ◽  
Second Generation ◽  
Synthetic Data ◽  
Curvelet Transform ◽  
Real Data ◽  
Sampled Data ◽  
Regularized Inversion ◽  
Irregularly Sampled Data ◽  
Fast Discrete Curvelet Transform

We extend our earlier work on the nonequispaced fast discrete curvelet transform (NFDCT) and introduce a second generation of the transform. This new generation differs from the previous one by the approach taken to compute accurate curvelet coefficients from irregularly sampled data. The first generation relies on accurate Fourier coefficients obtained by an [Formula: see text]-regularized inversion of the nonequispaced fast Fourier transform (FFT) whereas the second is based on a direct [Formula: see text]-regularized inversion of the operator that links curvelet coefficients to irregular data. Also, by construction the second generation NFDCT is lossless unlike the first generation NFDCT. This property is particularly attractive for processing irregularly sampled seismic data in the curvelet domain and bringing them back to their irregular record-ing locations with high fidelity. Secondly, we combine the second generation NFDCT with the standard fast discrete curvelet transform (FDCT) to form a new curvelet-based method, coined nonequispaced curvelet reconstruction with sparsity-promoting inversion (NCRSI) for the regularization and interpolation of irregularly sampled data. We demonstrate that for a pure regularization problem the reconstruction is very accurate. The signal-to-reconstruction error ratio in our example is above [Formula: see text]. We also conduct combined interpolation and regularization experiments. The reconstructions for synthetic data are accurate, particularly when the recording locations are optimally jittered. The reconstruction in our real data example shows amplitudes along the main wavefronts smoothly varying with limited acquisition imprint.

Reservoir Prediction Under Control of Sedimentary Facies

2017 ◽  
Vol 25 (03) ◽  
pp. 1750022
Author(s):  
Xiuwei Yang ◽  
Peimin Zhu
Keyword(s):  
Seismic Data ◽  
Low Frequency ◽  
Prediction Method ◽  
Rock Physics ◽  
Real Data ◽  
Sedimentary Facies ◽  
Seismic Inversion ◽  
Rock Properties ◽  
Reservoir Prediction ◽  
Frequency Model

Acoustic impedance (AI) from seismic inversion can indicate rock properties and can be used, when combined with rock physics, to predict reservoir parameters, such as porosity. Solutions to seismic inversion problem are almost nonunique due to the limited bandwidth of seismic data. Additional constraints from well log data and geology are needed to arrive at a reasonable solution. In this paper, sedimentary facies is used to reduce the uncertainty in inversion and rock physics modeling; the results not only agree with seismic data, but also conform to geology. A reservoir prediction method, which incorporates seismic data, well logs, rock physics and sedimentary facies, is proposed. AI was first derived by constrained sparse spike inversion (CSSI) using a sedimentary facies dependent low-frequency model, and then was transformed to reservoir parameters by sequential simulation, statistical rock physics and [Formula: see text]-model. Two numerical experiments using synthetic model and real data indicated that the sedimentary facies information may help to obtain a more reasonable prediction.

Accurate poststack acoustic-impedance inversion by well-log calibration

Geophysics ◽  
2009 ◽  
Vol 74 (5) ◽  
pp. R59-R67 ◽  
Author(s):  
Igor B. Morozov ◽  
Jinfeng Ma
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Joint Inversion ◽  
Low Frequency ◽  
Real Data ◽  
Data Sets ◽  
Frequency Model ◽  
Physical Constraints ◽  
Impedance Inversion ◽  
Reliable Solution

The seismic-impedance inversion problem is underconstrained inherently and does not allow the use of rigorous joint inversion. In the absence of a true inverse, a reliable solution free from subjective parameters can be obtained by defining a set of physical constraints that should be satisfied by the resulting images. A method for constructing synthetic logs is proposed that explicitly and accurately satisfies (1) the convolutional equation, (2) time-depth constraints of the seismic data, (3) a background low-frequency model from logs or seismic/geologic interpretation, and (4) spectral amplitudes and geostatistical information from spatially interpolated well logs. The resulting synthetic log sections or volumes are interpretable in standard ways. Unlike broadly used joint-inversion algorithms, the method contains no subjectively selected user parameters, utilizes the log data more completely, and assesses intermediate results. The procedure is simple and tolerant to noise, and it leads to higher-resolution images. Separating the seismic and subseismic frequency bands also simplifies data processing for acoustic-impedance (AI) inversion. For example, zero-phase deconvolution and true-amplitude processing of seismic data are not required and are included automatically in this method. The approach is applicable to 2D and 3D data sets and to multiple pre- and poststack seismic attributes. It has been tested on inversions for AI and true-amplitude reflectivity using 2D synthetic and real-data examples.

Sign in / Sign up

Export Citation Format

Share Document