Accurate poststack acoustic-impedance inversion by well-log calibration

Geophysics ◽  
2009 ◽  
Vol 74 (5) ◽  
pp. R59-R67 ◽  
Author(s):  
Igor B. Morozov ◽  
Jinfeng Ma
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Joint Inversion ◽  
Low Frequency ◽  
Real Data ◽  
Data Sets ◽  
Frequency Model ◽  
Physical Constraints ◽  
Impedance Inversion ◽  
Reliable Solution

The seismic-impedance inversion problem is underconstrained inherently and does not allow the use of rigorous joint inversion. In the absence of a true inverse, a reliable solution free from subjective parameters can be obtained by defining a set of physical constraints that should be satisfied by the resulting images. A method for constructing synthetic logs is proposed that explicitly and accurately satisfies (1) the convolutional equation, (2) time-depth constraints of the seismic data, (3) a background low-frequency model from logs or seismic/geologic interpretation, and (4) spectral amplitudes and geostatistical information from spatially interpolated well logs. The resulting synthetic log sections or volumes are interpretable in standard ways. Unlike broadly used joint-inversion algorithms, the method contains no subjectively selected user parameters, utilizes the log data more completely, and assesses intermediate results. The procedure is simple and tolerant to noise, and it leads to higher-resolution images. Separating the seismic and subseismic frequency bands also simplifies data processing for acoustic-impedance (AI) inversion. For example, zero-phase deconvolution and true-amplitude processing of seismic data are not required and are included automatically in this method. The approach is applicable to 2D and 3D data sets and to multiple pre- and poststack seismic attributes. It has been tested on inversions for AI and true-amplitude reflectivity using 2D synthetic and real-data examples.

Reservoir Prediction Under Control of Sedimentary Facies

2017 ◽  
Vol 25 (03) ◽  
pp. 1750022
Author(s):  
Xiuwei Yang ◽  
Peimin Zhu
Keyword(s):  
Seismic Data ◽  
Low Frequency ◽  
Prediction Method ◽  
Rock Physics ◽  
Real Data ◽  
Sedimentary Facies ◽  
Seismic Inversion ◽  
Rock Properties ◽  
Reservoir Prediction ◽  
Frequency Model

Acoustic impedance (AI) from seismic inversion can indicate rock properties and can be used, when combined with rock physics, to predict reservoir parameters, such as porosity. Solutions to seismic inversion problem are almost nonunique due to the limited bandwidth of seismic data. Additional constraints from well log data and geology are needed to arrive at a reasonable solution. In this paper, sedimentary facies is used to reduce the uncertainty in inversion and rock physics modeling; the results not only agree with seismic data, but also conform to geology. A reservoir prediction method, which incorporates seismic data, well logs, rock physics and sedimentary facies, is proposed. AI was first derived by constrained sparse spike inversion (CSSI) using a sedimentary facies dependent low-frequency model, and then was transformed to reservoir parameters by sequential simulation, statistical rock physics and [Formula: see text]-model. Two numerical experiments using synthetic model and real data indicated that the sedimentary facies information may help to obtain a more reasonable prediction.

Interpretation of full-azimuth broadband land data from Saudi Arabia and implications for improved inversion, reservoir characterization, and exploration

2013 ◽  
Vol 1 (2) ◽  
pp. T167-T176 ◽  
Author(s):  
Brian P. Wallick ◽  
Luis Giroldi
Keyword(s):  
Saudi Arabia ◽  
Seismic Data ◽  
Acoustic Impedance ◽  
Reservoir Characterization ◽  
Signal To Noise Ratio ◽  
Low Frequency ◽  
Gas Field ◽  
Frequency Model ◽  
Low Frequencies ◽  
Limited Bandwidth

Interpretation of conventional land seismic data over a Permian-age gas field in Eastern Saudi Arabia has proven difficult over time due to low signal-to-noise ratio and limited bandwidth in the seismic volume. In an effort to improve the signal and broaden the bandwidth, newly acquired seismic data over this field have employed point receiver technology, dense wavefield sampling, a full azimuth geometry, and a specially designed sweep with useful frequencies as low as three hertz. The resulting data display enhanced reflection continuity and improved resolution. With the extension of low frequencies and improved interpretability, acoustic impedance inversion results are more robust and allow greater flexibility in reservoir characterization and prediction. In addition, because inversion to acoustic impedance is no longer completely tied to a wells-only low-frequency model, there are positive implications for exploration.

Joint inversion of seismic data for acoustic impedance

Geophysics ◽  
2004 ◽  
Vol 69 (4) ◽  
pp. 994-1004 ◽  
Author(s):  
Li‐Yun Fu
Keyword(s):  
Neural Network ◽  
Seismic Data ◽  
Acoustic Impedance ◽  
Joint Inversion ◽  
Signal Reconstruction ◽  
Optimal Estimation ◽  
Data Sets ◽  
Seismic Wavelet ◽  
Model Based ◽  
Band Limited

I propose a joint inversion scheme to integrate seismic data, well data, and geological knowledge for acoustic impedance estimation. I examine the problem of recovering acoustic impedance from band‐limited seismic data. Optimal estimation of impedance can be achieved by combined applications of model‐based and deconvolution‐based methods. I incorporate the Robinson seismic convolutional model (RSCM) into the Caianiello neural network for network mapping. The Caianiello neural network provides an efficient approach to decompose the seismic wavelet and its inverse. The joint inversion consists of four steps: (1) multistage seismic inverse wavelets (MSIW) extraction at the wells, (2) the deconvolution with MSIW for initial impedance estimation, (3) multistage seismic wavelets (MSW) extraction at the wells, and (4) the model‐based reconstruction of impedance with MSW for improving the initial impedance model. The Caianiello neural network offers two algorithms for the four‐step process: neural wavelet estimation and input signal reconstruction. The frequency‐domain implementation of the algorithms enables control of the inversion on different frequency scales and facilitates an understanding of reservoir behavior on different resolution scales. The test results show that, with well control, the joint inversion can significantly improve the spatial description of reservoirs in data sets involving complex continental deposits.

Incorporation of geology with rock physics enables subsalt poststack inversion: A case study in the Gulf of Mexico

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB53-WB65 ◽  
Author(s):  
Huyen Bui ◽  
Jennifer Graham ◽  
Shantanu Kumar Singh ◽  
Fred Snyder ◽  
Martiris Smith
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Low Frequency ◽  
Rock Physics ◽  
Seismic Inversion ◽  
Inversion Method ◽  
Reservoir Properties ◽  
Blind Test ◽  
Frequency Model ◽  
Layer Sequence

One of the main goals of seismic inversion is to obtain high-resolution relative and absolute impedance for reservoir properties prediction. We aim to study whether the results from seismic inversion of subsalt data are sufficiently robust for reliable reservoir characterization. Approximately [Formula: see text] of poststack, wide-azimuth, anisotropic (vertical transverse isotropic) wave-equation migration seismic data from 50 Outer Continental Shelf blocks in the Green Canyon area of the Gulf of Mexico were inverted in this study. A total of four subsalt wells and four subsalt seismic interpreted horizons were used in the inversion process, and one of the wells was used for a blind test. Our poststack inversion method used an iterative discrete spike inversion method, based on the combination of space-adaptive wavelet processing to invert for relative acoustic impedance. Next, the dips were estimated from seismic data and converted to a horizon-like layer sequence field that was used as one of the inputs into the low-frequency model. The background model was generated by incorporating the well velocities, seismic velocity, seismic interpreted horizons, and the previously derived layer sequence field in the low-frequency model. Then, the relative acoustic impedance volume was scaled by adding the low-frequency model to match the calculated acoustic impedance logs from the wells for absolute acoustic impedance. Finally, the geological information and rock physics data were incorporated into the reservoir properties assessment for sand/shale prediction in two main target reservoirs in the Miocene and Wilcox formations. Overall, the poststack inversion results and the sand/shale prediction showed good ties at the well locations. This was clearly demonstrated in the blind test well. Hence, incorporating rock physics and geology enables poststack inversion in subsalt areas.

Poststack impedance inversion considering the diffractive component of the wavefield

Geophysics ◽  
2020 ◽  
Vol 85 (1) ◽  
pp. R11-R28 ◽  
Author(s):  
Kun Xiang ◽  
Evgeny Landa
Keyword(s):  
Specular Reflection ◽  
Low Frequency ◽  
Velocity Model ◽  
Forward Modeling ◽  
Small Scale ◽  
Fracture Detection ◽  
Frequency Model ◽  
New Approach ◽  
Impedance Inversion ◽  
Diffraction Imaging

Seismic diffraction waveform energy contains important information about small-scale subsurface elements, and it is complementary to specular reflection information about subsurface properties. Diffraction imaging has been used for fault, pinchout, and fracture detection. Very little research, however, has been carried out taking diffraction into account in the impedance inversion. Usually, in the standard inversion scheme, the input is the migrated data and the assumption is taken that the diffraction energy is optimally focused. This assumption is true only for a perfectly known velocity model and accurate true amplitude migration algorithm, which are rare in practice. We have developed a new approach for impedance inversion, which takes into account diffractive components of the total wavefield and uses the unmigrated input data. Forward modeling, designed for impedance inversion, includes the classical specular reflection plus asymptotic diffraction modeling schemes. The output model is composed of impedance perturbation and the low-frequency model. The impedance perturbation is estimated using the Bayesian approach and remapped to the migrated domain by the kinematic ray tracing. Our method is demonstrated using synthetic and field data in comparison with the standard inversion. Results indicate that inversion with taking into account diffraction can improve the acoustic impedance prediction in the vicinity of local reflector discontinuities.

Relative time seislet transform

Geophysics ◽  
2020 ◽  
Vol 85 (2) ◽  
pp. V223-V232 ◽  
Author(s):  
Zhicheng Geng ◽  
Xinming Wu ◽  
Sergey Fomel ◽  
Yangkang Chen
Keyword(s):  
Seismic Data ◽  
Computational Cost ◽  
Lifting Scheme ◽  
Real Data ◽  
Data Sets ◽  
Relative Time ◽  
New Approach ◽  
New Formulation ◽  
Wavelet Lifting ◽  
Seismic Images

The seislet transform uses the wavelet-lifting scheme and local slopes to analyze the seismic data. In its definition, the designing of prediction operators specifically for seismic images and data is an important issue. We have developed a new formulation of the seislet transform based on the relative time (RT) attribute. This method uses the RT volume to construct multiscale prediction operators. With the new prediction operators, the seislet transform gets accelerated because distant traces get predicted directly. We apply our method to synthetic and real data to demonstrate that the new approach reduces computational cost and obtains excellent sparse representation on test data sets.

Denoising seismic data using the nonlocal means algorithm

Geophysics ◽  
2012 ◽  
Vol 77 (1) ◽  
pp. A5-A8 ◽  
Author(s):  
David Bonar ◽  
Mauricio Sacchi
Keyword(s):  
Seismic Data ◽  
Random Noise ◽  
Seismic Energy ◽  
Real Data ◽  
Spatial Proximity ◽  
Data Sets ◽  
Noise Attenuation ◽  
Nonlocal Means ◽  
Reflection Seismic ◽  
Generally True

The nonlocal means algorithm is a noise attenuation filter that was originally developed for the purposes of image denoising. This algorithm denoises each sample or pixel within an image by utilizing other similar samples or pixels regardless of their spatial proximity, making the process nonlocal. Such a technique places no assumptions on the data except that structures within the data contain a degree of redundancy. Because this is generally true for reflection seismic data, we propose to adopt the nonlocal means algorithm to attenuate random noise in seismic data. Tests with synthetic and real data sets demonstrate that the nonlocal means algorithm does not smear seismic energy across sharp discontinuities or curved events when compared to seismic denoising methods such as f-x deconvolution.

Diffraction images and their attributes based on asymmetric summation: real data application

2020 ◽  
Author(s):  
Maxim I. Protasov ◽  
◽  
Vladimir A. Tcheverda ◽  
Valery V. Shilikov ◽  
◽  
...  
Keyword(s):  
Seismic Data ◽  
Real Data ◽  
Data Sets ◽  
Data Application ◽  
Diffraction Imaging

The paper deals with a 3D diffraction imaging with the subsequent diffraction attribute calculation. The imaging is based on an asymmetric summation of seismic data and provides three diffraction attributes: structural diffraction attribute, point diffraction attribute, an azimuth of structural diffraction. These attributes provide differentiating fractured and cavernous objects and to determine the fractures orientations. Approbation of the approach was provided on several real data sets.

Sign in / Sign up

Export Citation Format

Share Document