Gravitational attraction of a rectangular prism with depth‐dependent density

Geophysics ◽  
1992 ◽  
Vol 57 (3) ◽  
pp. 470-473 ◽  
Author(s):  
J. García‐Abdeslem
Keyword(s):  
Cross Sections ◽  
Integral Method ◽  
Three Dimensional ◽  
Density Contrast ◽  
Gravitational Attraction ◽  
Two Dimensional ◽  
Gravity Effect ◽  
Line Integral ◽  
Closed Expression ◽  
Dependent Density

The gravity effect produced by two and three‐dimensional bodies with nonuniform density contrast has been treated by several authors. One of the first attempts in this direction made by Cordell (1973), who developed a method to compute the gravity effect due to a two‐dimensional prism whose density decreases exponentially with depth. A different approach was proposed by Murthy and Rao (1979). They extended the line‐integral method to obtain the gravity effect for bodies of arbitrary cross‐sections, with density contrast varying linearly with depth. Chai and Hinze (1988) have derived a wavenumber‐domain approach to compute the gravity effect due to a vertical prism whose density contrast varies exponentially with depth. Recently, Rao (1990) has developed a closed expression of the gravity field produced by an asymmetrical trapezoidal body whose density varies with depth following a quadratic polynomial.

Gravity anomalies of two‐dimensional bodies of irregular cross‐section with density contrast varying with depth

Geophysics ◽  
1979 ◽  
Vol 44 (9) ◽  
pp. 1525-1530 ◽  
Author(s):  
I. V. Radhakrishna Murthy ◽  
D. Bhaskara Rao
Keyword(s):  
Gravity Anomaly ◽  
Cross Section ◽  
Cross Sections ◽  
Integral Method ◽  
Gravity Anomalies ◽  
Density Contrast ◽  
Two Dimensional ◽  
Gravity Effect ◽  
Line Integral ◽  
Exponential Increase

The line‐integral method of Hubbert (1948) is extended to obtain the gravity anomalies of two‐dimensional bodies of arbitrary cross‐sections with density contrast varying linearly with depth. The cross‐section is replaced by an N‐sided polygon. The coordinates of two vertices of any given side are used to determine the associated contribution to the gravity anomaly. The gravity contribution of each side is then summed to yield the total gravity effect. The case where density contrast varies exponentially with depth is also considered. This technique is used to obtain the structure of the San Jacinto Graben, California, where sediments filling the graben have an exponential increase in density with depth.

A linearity test for thick specimens imaged by HVEM over a 180° angular range

1991 ◽  
Vol 49 ◽  
pp. 552-553
Author(s):  
Yu Liu
Keyword(s):  
Phase Contrast ◽  
Three Dimensional ◽  
Angular Range ◽  
Two Dimensional ◽  
Back Projection ◽  
Line Integral ◽  
Exponential Law ◽  
Transmission Electron ◽  
Absorption Law ◽  
Linearity Test

The image obtained in a transmission electron microscope is the two-dimensional projection of a three-dimensional (3D) object. The 3D reconstruction of the object can be calculated from a series of projections by back-projection, but this algorithm assumes that the image is linearly related to a line integral of the object function. However, there are two kinds of contrast in electron microscopy, scattering and phase contrast, of which only the latter is linear with the optical density (OD) in the micrograph. Therefore the OD can be used as a measure of the projection only for thin specimens where phase contrast dominates the image. For thick specimens, where scattering contrast predominates, an exponential absorption law holds, and a logarithm of OD must be used. However, for large thicknesses, the simple exponential law might break down due to multiple and inelastic scattering.

scholarly journals Membrane analogy for multi-material bars under torsion

2019 ◽  
Vol 475 (2225) ◽  
pp. 20190124 ◽  
Author(s):  
Laura Galuppi ◽  
Gianni Royer-Carfagni
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Cross Sections ◽  
Three Dimensional ◽  
Element Model ◽  
Elastic Problem ◽  
Two Dimensional ◽  
Torsion Problem ◽  
Linear Elastic ◽  
Physical Apparatus

Prandtl's membrane analogy for the torsion problem of prismatic homogeneous bars is extended to multi-material cross sections. The linear elastic problem is governed by the same equations describing the deformation of an inflated membrane, differently tensioned in regions that correspond to the domains hosting different materials in the bar cross section, in a way proportional to the inverse of the material shear modulus. Multi-connected cross sections correspond to materials with vanishing stiffness inside the holes, implying infinite tension in the corresponding portions of the membrane. To define the interface constrains that allow to apply such a state of prestress to the membrane, a physical apparatus is proposed, which can be numerically modelled with a two-dimensional mesh implementable in commercial finite-element model codes. This approach presents noteworthy advantages with respect to the three-dimensional modelling of the twisted bar.

scholarly journals Computational Study of Zigzag Spacer Design with Elliptical Cross-Section Filaments

2020 ◽  
Vol 307 ◽  
pp. 01047
Author(s):  
Gohar Shoukat ◽  
Farhan Ellahi ◽  
Muhammad Sajid ◽  
Emad Uddin
Keyword(s):  
Mass Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Computational Study ◽  
Flow Direction ◽  
Three Dimensional ◽  
Circular Cross Section ◽  
Two Dimensional ◽  
Permeate Flux ◽  
Elliptical Cross

The large energy consumption of membrane desalination process has encouraged researchers to explore different spacer designs using Computational Fluid Dynamics (CFD) for maximizing permeate per unit of energy consumed. In previous studies of zigzag spacer designs, the filaments are modeled as circular cross sections in a two-dimensional geometry under the assumption that the flow is oriented normal to the filaments. In this work, we consider the 45° orientation of the flow towards the three-dimensional zigzag spacer unit, which projects the circular cross section of the filament as elliptical in a simplified two-dimensional domain. OpenFOAM was used to simulate the mass transfer enhancement in a reverse-osmosis desalination unit employing spiral wound membranes lined with zigzag spacer filaments. Properties that impact the concentration polarization and hence permeate flux were analyzed in the domain with elliptical filaments as well as a domain with circular filaments to draw suitable comparisons. The range of variation in characteristic parameters across the domain between the two different configurations is determined. It was concluded that ignoring the elliptical projection of circular filaments to the flow direction, can introduce significant margin of error in the estimation of mass transfer coefficient.

scholarly journals A New Approach to Accuracy Evaluation of Single-Tooth Abutment Using Two-Dimensional Analysis in Two Intraoral Scanners

2019 ◽  
Vol 16 (6) ◽  
pp. 1021 ◽  
Author(s):  
Jiyoun Maeng ◽  
Young-Jun Lim ◽  
Bongju Kim ◽  
Myung-Joo Kim ◽  
Ho-Beom Kwon
Keyword(s):  
Dimensional Analysis ◽  
Cross Sections ◽  
Three Dimensional ◽  
Accuracy Evaluation ◽  
Two Dimensional ◽  
3D Data ◽  
Accuracy Comparison ◽  
Single Tooth ◽  
Sharp Edges ◽  
Data Files

The aim of this study was to two-dimensionally evaluate deviation errors at five digital cross-sections of single-tooth abutment in regards to data obtained from two intraoral scanners, and to evaluate accuracy of individual scanners. Two intraoral scanners, the Trios 3® (3 Shape, Copenhagen, Denmark) and EzScan® (Vatech, Hwaseong, Korea), were evaluated by utilizing 13 stone models. The superimposed 3D data files were sectioned into five different planes: buccal-lingual section (BL), mesial-distal section (MD), transverse high section (TH), transverse middle section (TM), and transverse low section (TL). Accuracy comparison between the two scanners in 5 groups was performed. BL vs. MD of each scanner, and three transverse groups (TH, TM, TL) of each scanner were analyzed for accuracy comparison. In comparison of 2-D analyses for two intraoral scanners, Trios 3® showed statistically significant higher accuracy in root mean square (RMS) at BL, TH, and TL (p < 0.05). For each scanner, RMS value showed that mesial-distal sections were more prone to error than buccal-lingual section, which exhibited statistically significant errors (p < 0.05) while the transverse groups did not. Two-dimensional analysis is more insightful than three-dimensional analysis on single-tooth abutment. In mesiodistal areas, rough prepped areas, and sharp edges where scanner accessibility is difficult, high deviation errors are shown.

THE GRAVITATIONAL ATTRACTION OF A RIGHT RECTANGULAR PRISM

Geophysics ◽  
1966 ◽  
Vol 31 (2) ◽  
pp. 362-371 ◽  
Author(s):  
Dezsö Nagy
Keyword(s):  
Gravity Field ◽  
Dimensional Analysis ◽  
Three Dimensional ◽  
Vertical Component ◽  
Gravitational Effect ◽  
Rectangular Prism ◽  
Gravitational Attraction ◽  
Closed Expression ◽  
Building Element ◽  
Terrain Corrections

The derivation of a closed expression is presented to calculate the vertical component of the gravitational attraction of a right rectangular prism, with sides parallel to the coordinate axis. As any configuration can be expressed as the sum of prisms of various sizes and densities, the computation of the total gravitational effect of bodies of arbitrary shapes at any point outside of or on the boundary of the bodies is straightforward. To calculate the gravitational effect of the “unit” building element a subroutine called Prism has been developed, tested, and incorporated, in one program to calculate terrain corrections, and in another program for three‐dimensional analysis of a gravity field.

Modelling of rotors with three-dimensional solid finite elements

2001 ◽  
Vol 36 (4) ◽  
pp. 359-371 ◽  
Author(s):  
A Nandi ◽  
S Neogy
Keyword(s):  
Finite Element ◽  
Finite Elements ◽  
Cross Sections ◽  
Three Dimensional ◽  
Element Model ◽  
Finite Element Formulation ◽  
Element Formulation ◽  
Two Dimensional ◽  
Inertia Effects ◽  
Solid Finite Elements

A shaft is modelled using three-dimensional solid finite elements. The shear-deformation and rotary inertia effects are automatically included through the three-dimensional elasticity formulation. The formulation allows warping of plane cross-sections and takes care of gyroscopic effect. Unlike a beam element model, the present model allows the actual rotor geometry to be modelled. Shafts with complicated geometry can be modelled provided that the shaft cross-section has two axes of symmetry with equal or unequal second moment of areas. The acceleration of a point on the shaft is determined in inertial and rotating frames. It is found that the finite element formulation becomes much simpler in a rotating frame of reference that rotates about the centre-line of the bearings with an angular velocity equal to the shafts spin speed. The finite element formulation in the above frame is ideally suited to non-circular shafts with solid or hollow, prismatic or tapered sections and continuous or abrupt change in cross-sections. The shaft and the disc can be modelled using the same types of element and this makes it possible to take into account the flexibility of the disc. The formulation also allows edge cracks to be modelled. A two-dimensional model of shaft disc systems executing synchronous whirl on isotropic bearings is presented. The application of the two-dimensional formulation is limited but it reduces the number of degrees of freedom. The three-dimensional solid and two-dimensional plane stress finite element models are extensively validated using standard available results.

scholarly journals Investigation of microvascular morphological measures for skeletal muscle tissue oxygenation by image-based modelling in three dimensions

2017 ◽  
Vol 14 (135) ◽  
pp. 20170635 ◽  
Author(s):  
B. Zeller-Plumhoff ◽  
K. R. Daly ◽  
G. F. Clough ◽  
P. Schneider ◽  
T. Roose
Keyword(s):  
Skeletal Muscle ◽  
Muscle Tissue ◽  
Cross Sections ◽  
Tissue Oxygenation ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Capillary Density ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Contrast Imaging

The supply of oxygen in sufficient quantity is vital for the correct functioning of all organs in the human body, especially for skeletal muscle during exercise. Traditionally, microvascular oxygen supply capability is assessed by the analysis of morphological measures on transverse cross-sections of muscle, e.g. capillary density or capillary-to-fibre ratio. In this work, we investigate the relationship between microvascular structure and muscle tissue oxygenation in mice. Phase contrast imaging was performed using synchrotron radiation computed tomography (SR CT) to visualize red blood cells (RBCs) within the microvasculature in mouse soleus muscle. Image-based mathematical modelling of the oxygen diffusion from the RBCs into the muscle tissue was subsequently performed, as well as a morphometric analysis of the microvasculature. The mean tissue oxygenation was then compared with the morphological measures of the microvasculature. RBC volume fraction and spacing (mean distance of any point in tissue to the closest RBC) emerged as the best predictors for muscle tissue oxygenation, followed by length density (summed RBC length over muscle volume). The two-dimensional measures of capillary density and capillary-to-fibre ratio ranked last. We, therefore, conclude that, in order to assess the states of health of muscle tissue, it is advisable to rely on three-dimensional morphological measures rather than on the traditional two-dimensional measures.

Sign in / Sign up

Export Citation Format

Share Document