MAGNETIC WELL LOGGING

Geophysics ◽  
1952 ◽  
Vol 17 (1) ◽  
pp. 1-26 ◽  
Author(s):  
R. A. Broding ◽  
C. W. Zimmerman ◽  
E. V. Somers ◽  
E. S. Wilhelm ◽  
A. A. Stripling
Keyword(s):  
Electrical Conductivity ◽  
Magnetic Susceptibility ◽  
Drilling Fluid ◽  
Well Logging ◽  
Simultaneous Recording ◽  
General Assumption ◽  
Total Field ◽  
Magnetic Well ◽  
Lithologic Character

The need for control data in interpretation of surface magnetometer surveys has led to the development of borehole instruments for measuring magnetic susceptibility and total magnetic field in situ. The susceptibility instrument is an alternating current induction device, and by separation of the quadrature components simultaneous recording of the magnetic susceptibility and the electrical conductivity is possible. The susceptibility log has many features that depart from ordinary electric logs. The instrument has a sensitivity of the order of [Formula: see text] cgs units and sufficient contrast has been found in the sediments to yield a log of considerable lithologic character. This magnetic character suggests the use of the susceptibility tool in the field of special well logging, particularly for geologic correlation, and for tracer studies. The general assumption that the magnetic susceptibility of the sediments is sufficiently low compared to basic igneous rocks so that sedimentary rocks have little effect on surface magnetometer measurements has been verified. Since the magnetic susceptibility and electrical conductivity logs are made with an induction instrument, an electrolyte is not required in the hole and the logs are independent of the drilling fluid, except that the conductivity log is influenced by highly conductive muds. The total field log is made with a three element self‐orientating saturable core magnetometer that has been developed for borehole use. This log has not been used extensively. In addition to reflecting changes in polarization of the formations, it is influenced by formation susceptibility. Logs have been made of the total field going into and through igneous plugs. The paper presents examples of these logs along with a brief description of the instruments developed to produce them.

scholarly journals The Relationship between Soil Electrical Parameters and Compaction of Sandy Clay Loam Soil

Agriculture ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 114
Author(s):  
Katarzyna Pentoś ◽  
Krzysztof Pieczarka ◽  
Kamil Serwata
Keyword(s):  
Electrical Conductivity ◽  
Magnetic Susceptibility ◽  
Precision Agriculture ◽  
Soil Compaction ◽  
Soil Layer ◽  
Soil Parameters ◽  
Soil Electrical Conductivity ◽  
Electrical Parameters ◽  
Management Zones ◽  
Additional Information

Soil spatial variability mapping allows the delimitation of the number of soil samples investigated to describe agricultural areas; it is crucial in precision agriculture. Electrical soil parameters are promising factors for the delimitation of management zones. One of the soil parameters that affects yield is soil compaction. The objective of this work was to indicate electrical parameters useful for the delimitation of management zones connected with soil compaction. For this purpose, the measurement of apparent soil electrical conductivity and magnetic susceptibility was conducted at two depths: 0.5 and 1 m. Soil compaction was measured for a soil layer at 0–0.5 m. Relationships between electrical soil parameters and soil compaction were modelled with the use of two types of neural networks—multilayer perceptron (MLP) and radial basis function (RBF). Better prediction quality was observed for RBF models. It can be stated that in the mathematical model, the apparent soil electrical conductivity affects soil compaction significantly more than magnetic susceptibility. However, magnetic susceptibility gives additional information about soil properties, and therefore, both electrical parameters should be used simultaneously for the delimitation of management zones.

Chemically reduced graphene oxide-coated knitted fabric imparted conductivity and outstanding hydrophobicity

2021 ◽  
pp. 004051752199547
Author(s):  
Min Hou ◽  
Xinghua Hong ◽  
Yanjun Tang ◽  
Zimin Jin ◽  
Chengyan Zhu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Chemical Reduction ◽  
Knitted Fabric ◽  
Mesh Structure ◽  
Reduced Graphene ◽  
Chemically Reduced Graphene Oxide ◽  
Modified Hummers Method

Functionalized knitted fabric, as a kind of flexible, wearable, and waterproof material capable of conductivity, sensitivity and outstanding hydrophobicity, is valuable for multi-field applications. Herein, the reduced graphene oxide (RGO)-coated knitted fabric (polyester/spandex blended) is prepared, which involves the use of graphite oxide (GO) by modified Hummers method and in-situ chemical reduction with hydrazine hydrate. The treated fabric exhibits a high electrical conductivity (202.09 S/cm) and an outstanding hydrophobicity (140°). The outstanding hydrophobicity is associated with the morphology of the fabric and fiber with reference to pseudo-infiltration. These properties can withstand repeated bending and washing without serious deterioration, maintaining good electrical conductivity (35.70 S/cm) and contact angle (119.39°) after eight standard washing cycles. The material, which has RGO architecture and continuous loop mesh structure, can find wide use in smart garment applications.

Diamond film nucleation and interface characterization

1992 ◽  
Vol 7 (8) ◽  
pp. 2151-2159 ◽  
Author(s):  
P. Bou ◽  
L. Vandenbulcke ◽  
R. Herbin ◽  
F. Hillion
Keyword(s):  
Cross Sections ◽  
Deposition Time ◽  
Sample Surface ◽  
Simultaneous Recording ◽  
Carbon Activity ◽  
Nucleation Density ◽  
Carbide Formation ◽  
Interface Characterization ◽  
Film Nucleation

A powerful micro SIMS technique coupled to a computer driven acquisition system has allowed the simultaneous recording of C−, MoO−, and Si− images of the sample surfaces, or of the transverse cross sections of the Mo-diamond interface. Diamond deposition has been shown to take place on a Mo2C layer, and the influence on the nucleation process of Si contamination, coming from the quartz tube etched by H atoms, has been investigated. Contamination can in fact occur during the shutdown procedures or during the whole experiment. This last contamination can be avoided by using suitable pressure ranges or gas combinations. Moreover, the deposition time necessary to obtain well-crystallized diamond films and the nucleation density could be optimized by an in situ pretreatment stage. This treatment reduces the delay observed before nucleation (which would correspond to the carbide formation), and increases the carbon activity at the sample surface.

A highly sensitive chlorine gas sensor and enhanced thermal DC electrical conductivity from polypyrrole/silicon carbide nanocomposites

RSC Advances ◽  
2016 ◽  
Vol 6 (87) ◽  
pp. 84200-84208 ◽  
Author(s):  
Adil Sultan ◽  
Sharique Ahmad ◽  
Faiz Mohammad
Keyword(s):  
Electrical Conductivity ◽  
Silicon Carbide ◽  
Gas Sensor ◽  
Dodecylbenzenesulfonic Acid ◽  
Chemical Polymerization ◽  
Dc Electrical Conductivity ◽  
Highly Sensitive ◽  
Chlorine Gas

We report the synthesis of polypyrrole (PPy) and polypyrrole/silicon carbide nanocomposites (PPy/SiC) and PPy/SiC/dodecylbenzenesulfonic acid (DBSA) by in situ chemical polymerization and their application as sensors for the detection of highly toxic chlorine gas.

A well logging technique for the in situ determination of 90Sr

1980 ◽  
Vol 173 (2) ◽  
pp. 299-301 ◽  
Author(s):  
R.L. Brodzinski ◽  
H.L. Nielson
Keyword(s):  
Well Logging

A Novel Method to Determine the Drilling Fluid Density for Gypsum-Salt Layer

2021 ◽  
Author(s):  
Jitong Liu ◽  
Wanjun Li ◽  
Haiqiu Zhou ◽  
Yixin Gu ◽  
Fuhua Jiang ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
In Situ Stress ◽  
Wellbore Stability ◽  
Shrinkage Rate ◽  
Fluid Density ◽  
Salt Layer ◽  
Rock Creep ◽  
Key Factor ◽  
Well Abandonment

Abstract The reservoir underneath the salt bed usually has high formation pressure and large production rate. However, downhole complexities such as wellbore shrinkage, stuck pipe, casing deformation and brine crystallization prone to occur in the drilling and completion of the salt bed. The drilling safety is affected and may lead to the failure of drilling to the target reservoir. The drilling fluid density is the key factor to maintain the salt bed’s wellbore stability. The in-situ stress of the composite salt bed (gypsum-salt -gypsum-salt-gypsum) is usually uneven distributed. Creep deformation and wellbore shrinkage affect each other within layers. The wellbore stability is difficult to maintain. Limited theorical reference existed for drilling fluid density selection to mitigate the borehole shrinkage in the composite gypsum-salt layers. This paper established a composite gypsum-salt model based on the rock mechanism and experiments, and a safe-drilling density selection layout is formed to solve the borehole shrinkage problem. This study provides fundamental basis for drilling fluid density selection for gypsum-salt layers. The experiment results show that, with the same drilling fluid density, the borehole shrinkage rate of the minimum horizontal in-situ stress azimuth is higher than that of the maximum horizontal in-situ stress azimuth. However, the borehole shrinkage rate of the gypsum layer is higher than salt layer. The hydration expansion of the gypsum is the dominant reason for the shrinkage of the composite salt-gypsum layer. In order to mitigate the borehole diameter reduction, the drilling fluid density is determined that can lower the creep rate less than 0.001, as a result, the borehole shrinkage of salt-gypsum layer is slowed. At the same time, it is necessary to improve the salinity, filter loss and plugging ability of the drilling fluid to inhibit the creep of the soft shale formation. The research results provide technical support for the safe drilling of composite salt-gypsum layers. This achievement has been applied to 135 wells in the Amu Darya, which completely solved the of wellbore shrinkage problem caused by salt rock creep. Complexities such as stuck string and well abandonment due to high-pressure brine crystallization are eliminated. The drilling cycle is shortened by 21% and the drilling costs is reduced by 15%.

scholarly journals Preparation and Thermoelectric Properties of Graphite/poly(3,4-ethyenedioxythiophene) Nanocomposites

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2849 ◽  
Author(s):  
Yong Du ◽  
Haixia Li ◽  
Xuechen Jia ◽  
Yunchen Dou ◽  
Jiayue Xu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Power Factor ◽  
Oxidative Polymerization ◽  
Polymerization Process ◽  
Measurement Temperature ◽  
Temperature Range ◽  
Different Content

Graphite/poly(3,4-ethyenedioxythiophene) (PEDOT) nanocomposites were prepared by an in-situ oxidative polymerization process. The electrical conductivity and Seebeck coefficient of the graphite/PEDOT nanocomposites with different content of graphite were measured in the temperature range from 300 K to 380 K. The results show that as the content of graphite increased from 0 to 37.2 wt %, the electrical conductivity of the nanocomposites increased sharply from 3.6 S/cm to 80.1 S/cm, while the Seebeck coefficient kept almost the same value (in the range between 12.0 μV/K to 15.1 μV/K) at 300 K, which lead to an increased power factor. The Seebeck coefficient of the nanocomposites increased from 300 K to 380 K, while the electrical conductivity did not substantially depend on the measurement temperature. As a result, a power factor of 3.2 μWm−1 K−2 at 380 K was obtained for the nanocomposites with 37.2 wt % graphite.

Sign in / Sign up

Export Citation Format

Share Document