scholarly journals Performance of HIRLAM in a Semiarid Heterogeneous Region: Evaluation of the Land Surface and Boundary Layer Description Using EFEDA Observations

2004 ◽  
Vol 132 (12) ◽  
pp. 2745-2760 ◽  
Author(s):  
Anne M. Jochum ◽  
Ernesto Rodríguez Camino ◽  
Hendrik A. R. de Bruin ◽  
Albert A. M. Holtslag
Keyword(s):  
Boundary Layer ◽  
Land Surface ◽  
Heterogeneous Region

scholarly journals Summer temperature response to extreme soil water conditions in the Mediterranean transitional climate regime

2021 ◽  
Author(s):  
Stefano Materia ◽  
Constantin Ardilouze ◽  
Chloé Prodhomme ◽  
Markus G. Donat ◽  
Marianna Benassi ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Soil Water ◽  
Land Surface ◽  
Heat Waves ◽  
Climate Regime ◽  
Seasonal Forecasts ◽  
Near Surface ◽  
Surface Temperatures ◽  
The Mediterranean

AbstractLand surface and atmosphere are interlocked by the hydrological and energy cycles and the effects of soil water-air coupling can modulate near-surface temperatures. In this work, three paired experiments were designed to evaluate impacts of different soil moisture initial and boundary conditions on summer temperatures in the Mediterranean transitional climate regime region. In this area, evapotranspiration is not limited by solar radiation, rather by soil moisture, which therefore controls the boundary layer variability. Extremely dry, extremely wet and averagely humid ground conditions are imposed to two global climate models at the beginning of the warm and dry season. Then, sensitivity experiments, where atmosphere is alternatively interactive with and forced by land surface, are launched. The initial soil state largely affects summer near-surface temperatures: dry soils contribute to warm the lower atmosphere and exacerbate heat extremes, while wet terrains suppress thermal peaks, and both effects last for several months. Land-atmosphere coupling proves to be a fundamental ingredient to modulate the boundary layer state, through the partition between latent and sensible heat fluxes. In the coupled runs, early season heat waves are sustained by interactive dry soils, which respond to hot weather conditions with increased evaporative demand, resulting in longer-lasting extreme temperatures. On the other hand, when wet conditions are prescribed across the season, the occurrence of hot days is suppressed. The land surface prescribed by climatological precipitation forcing causes a temperature drop throughout the months, due to sustained evaporation of surface soil water. Results have implications for seasonal forecasts on both rain-fed and irrigated continental regions in transitional climate zones.

scholarly journals Dome effect of black carbon and its key influencing factors: A one-dimensional modelling study

2017 ◽  
Author(s):  
Zilin Wang ◽  
Xin Huang ◽  
Aijun Ding
Keyword(s):  
Boundary Layer ◽  
Air Pollution ◽  
Black Carbon ◽  
Rural Areas ◽  
Land Surface ◽  
Critical Role ◽  
Aerosol Layer ◽  
Near Surface ◽  
Haze Pollution ◽  
The Impact

Abstract. Black carbon (BC) has been identified to play a critical role in aerosol-planet boundary layer (PBL) interaction and further deterioration of near-surface air pollution in megacities, which has been named as its dome effect. However, the impacts of key factors that influence this effect, such as the vertical distribution and aging processes of BC, and also the underlying land surface, have not been quantitatively explored yet. Here, based on available in-situ measurements of meteorology and atmospheric aerosols together with the meteorology-chemistry online coupled model, WRF-Chem, we conduct a set of parallel simulations to quantify the roles of these factors in influencing the BC's dome effect and surface haze pollution, and discuss the main implications of the results to air pollution mitigation in China. We found that the impact of BC on PBL is very sensitive to the altitude of aerosol layer. The upper level BC, especially those near the capping inversion, is more essential in suppressing the PBL height and weakening the turbulence mixing. The dome effect of BC tends to be significantly intensified as BC aerosol mixed with scattering aerosols during winter haze events, resulting in a decrease of PBL height by more than 25 %. In addition, the dome effect is more substantial (up to 15 %) in rural areas than that in the urban areas with the same BC loading, indicating an unexpected regional impact of such kind of effect to air quality in countryside. This study suggests that China's regional air pollution would greatly benefit from BC emission reductions, especially those from the elevated sources from the chimneys and also the domestic combustions in rural areas, through weakening the aerosol-boundary layer interactions that triggered by BC.

scholarly journals High-resolution fully-coupled atmospheric–hydrological modeling: a cross-compartment regional water and energy cycle evaluation

2020 ◽  
Author(s):  
Benjamin Fersch ◽  
Alfonso Senatore ◽  
Bianca Adler ◽  
Joël Arnault ◽  
Matthias Mauder ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Land Surface ◽  
Hydrological Modeling ◽  
Weather Prediction ◽  
Surface Model ◽  
Near Surface ◽  
Ground Heat Flux ◽  
The Impact ◽  
Fully Coupled ◽  
Regional Water

<p>The land surface and the atmospheric boundary layer are closely intertwined with respect to the exchange of water, trace gases and energy. Nonlinear feedback and scale dependent mechanisms are obvious by observations and theories. Modeling instead is often narrowed to single compartments of the terrestrial system or bound to traditional viewpoints of definite scientific disciplines. Coupled terrestrial hydrometeorological modeling systems attempt to overcome these limitations to achieve a better integration of the processes relevant for regional climate studies and local area weather prediction. We examine the ability of the hydrologically enhanced version of the Weather Research and Forecasting Model (WRF-Hydro) to reproduce the regional water cycle by means of a two-way coupled approach and assess the impact of hydrological coupling with respect to a traditional regional atmospheric model setting. It includes the observation-based calibration of the hydrological model component (offline WRF-Hydro) and a comparison of the classic WRF and the fully coupled WRF-Hydro models both with identical calibrated parameter settings for the land surface model (Noah-MP). The simulations are evaluated based on extensive observations at the pre-Alpine Terrestrial Environmental Observatory (TERENO Pre-Alpine) for the Ammer (600 km²) and Rott (55 km²) river catchments in southern Germany, covering a five month period (Jun–Oct 2016).</p><p>The sensitivity of 7 land surface parameters is tested using the <em>Latin-Hypercube One-factor-At-a-Time</em> (LH-OAT) method and 6 sensitive parameters are subsequently optimized for 6 different subcatchments, using the Model-Independent <em>Parameter Estimation and Uncertainty Analysis software</em> (PEST).</p><p>The calibration of the offline WRF-Hydro leads to Nash-Sutcliffe efficiencies between 0.56 and 0.64 and volumetric efficiencies between 0.46 and 0.81 for the six subcatchments. The comparison of classic WRF and fully coupled WRF-Hydro shows only tiny alterations for radiation and precipitation but considerable changes for moisture- and energy fluxes. By comparison with TERENO Pre-Alpine observations, the fully coupled model slightly outperforms the classic WRF with respect to evapotranspiration, sensible and ground heat flux, near surface mixing ratio, temperature, and boundary layer profiles of air temperature. The subcatchment-based water budgets show uniformly directed variations for evapotranspiration, infiltration excess and percolation whereas soil moisture and precipitation change randomly.</p>

scholarly journals An investigation of ozone and planetary boundary layer dynamics over the complex topography of Grenoble combining measurements and modeling

2003 ◽  
Vol 3 (1) ◽  
pp. 797-825 ◽  
Author(s):  
O. Couach ◽  
I Balin ◽  
R. Jiménez ◽  
P. Ristori ◽  
S. Perego ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Land Surface ◽  
Mesoscale Model ◽  
Ozone Production ◽  
Horizontal Wind ◽  
Maximum Height ◽  
Complex Topography ◽  
Atmospheric Measurements ◽  
Model Calculations

Abstract. This paper concerns an evaluation of ozone (O3) and planetary boundary layer (PBL) dynamics over the complex topography of the Grenoble region through a combination of measurements and mesoscale model (METPHOMOD) predictions for three days, during July 1999. The measurements of O3 and PBL structure were obtained with a Differential Absorption Lidar (DIAL) system, situated 20 km south of Grenoble at Vif (310 m a.s.l.). The combined lidar observations and model calculations are in good agreement with atmospheric measurements obtained with an instrumented aircraft (METAIR). Ozone fluxes were calculated using lidar measurements of ozone vertical profiles concentrations and the horizontal wind speeds measured with a Radar Doppler wind profiler (DEGREANE). The ozone flux patterns indicate that the diurnal cycle of ozone production is controlled by local thermal winds. The convective PBL maximum height was some 2700 m above the land surface while the nighttime residual ozone layer was generally found between 1200 and 2200 m. Finally we evaluate the magnitude of the ozone processes at different altitudes in order to estimate the photochemical ozone production due to the primary pollutants emissions of Grenoble city and the regional network of automobile traffic.

The Probability Distribution of Land Surface Wind Speeds

2011 ◽  
Vol 24 (15) ◽  
pp. 3892-3909 ◽  
Author(s):  
Adam H. Monahan ◽  
Yanping He ◽  
Norman McFarlane ◽  
Aiguo Dai
Keyword(s):  
Boundary Layer ◽  
Weibull Distribution ◽  
Land Surface ◽  
Wind Shear ◽  
Surface Wind ◽  
Nocturnal Boundary Layer ◽  
Global Network ◽  
Strong Wind ◽  
Wind Speeds ◽  
Tropospheric Wind

Abstract The probability density function (pdf) of land surface wind speeds is characterized using a global network of observations. Daytime surface wind speeds are shown to be broadly consistent with the Weibull distribution, while nighttime surface wind speeds are generally more positively skewed than the corresponding Weibull distribution (particularly in summer). In the midlatitudes, these strongly positive skewnesses are shown to be generally associated with conditions of strong surface stability and weak lower-tropospheric wind shear. Long-term tower observations from Cabauw, the Netherlands, and Los Alamos, New Mexico, demonstrate that lower-tropospheric wind speeds become more positively skewed than the corresponding Weibull distribution only in the shallow (~50 m) nocturnal boundary layer. This skewness is associated with two populations of nighttime winds: (i) strongly stably stratified with strong wind shear and (ii) weakly stably or unstably stratified with weak wind shear. Using an idealized two-layer model of the boundary layer momentum budget, it is shown that the observed variability of the daytime and nighttime surface wind speeds can be accounted for through a stochastic representation of intermittent turbulent mixing at the nocturnal boundary layer inversion.

scholarly journals Land-surface processes and summer-cloud-precipitation characteristics in the Tibetan Plateau and their effects on downstream weather: a review and perspective

2020 ◽  
Vol 7 (3) ◽  
pp. 500-515 ◽  
Author(s):  
Yunfei Fu ◽  
Yaoming Ma ◽  
Lei Zhong ◽  
Yuanjian Yang ◽  
Xueliang Guo ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Vertical Direction ◽  
Heat Fluxes ◽  
Surface Processes ◽  
Convective Precipitation ◽  
The Tibetan Plateau ◽  
Land Surface Processes

Abstract Correct understanding of the land-surface processes and cloud-precipitation processes in the Tibetan Plateau (TP) is an important prerequisite for the study and forecast of the downstream activities of weather systems and one of the key points for understanding the global atmospheric movement. In order to show the achievements that have been made, this paper reviews the progress on the observations for the atmospheric boundary layer, land-surface heat fluxes, cloud-precipitation distributions and vertical structures by using ground- and space-based multiplatform, multisensor instruments and the effect of the cloud system in the TP on the downstream weather. The results show that the form drag related to the topography, land–atmosphere momentum and scalar fluxes is an important part of the parameterization process. The sensible heat flux decreased especially in the central and northern TP caused by the decrease in wind speeds and the differences in the ground-air temperatures. Observations show that the cloud and precipitation over the TP have a strong diurnal variation. Studies also show the compressed-air column in the troposphere by the higher-altitude terrain of the TP makes particles inside clouds vary at a shorter distance in the vertical direction than those in the non-plateau area so that precipitation intensity over the TP is usually small with short duration, and the vertical structure of the convective precipitation over the TP is obviously different from that in other regions. In addition, the influence of the TP on severe weather downstream is preliminarily understood from the mechanism. It is necessary to use model simulations and observation techniques to reveal the difference between cloud precipitation in the TP and non-plateau areas in order to understand the cloud microphysical parameters over the TP and the processes of the land boundary layer affecting cloud, precipitation and weather in the downstream regions.

scholarly journals Entropy production by evapotranspiration and its geographic variation

2008 ◽  
Vol 3 (Special Issue No. 1) ◽  
pp. S89-S94 ◽  
Author(s):  
A. Kleidon
Keyword(s):  
Boundary Layer ◽  
Relative Humidity ◽  
Atmospheric Boundary Layer ◽  
Entropy Production ◽  
Land Surface ◽  
Model Simulation ◽  
Hydrologic Cycle ◽  
Climate System Model ◽  
Biotic Effects

The hydrologic cycle is a system far from thermodynamic equilibrium that is characterized by its rate of entropy production in the climatological mean steady state. Over land, the hydrologic cycle is strongly affected by the presence of terrestrial vegetation. In order to investigate the role of the biota in the hydrologic cycle, it is critical to investigate the consequences of biotic effects from this thermodynamic perspective. Here I quantify entropy production by evapotranspiration with a climate system model of intermediate complexity and estimate its sensitivity to vegetation cover. For present-day conditions, the global mean entropy production of evaporation is 8.4 mW/m<sup>2</sup>/K, which is about 1/3 of the estimated entropy production of the whole hydrologic cycle. On average, ocean surfaces generally produce more than twice as much entropy as land surfaces. On land, high rates of entropy production of up to 16 mW/m<sup>2</sup>/K are found in regions of high evapotranspiration, although relative humidity of the atmospheric boundary layer is also an important factor. With an additional model simulation of a “Desert” simulation, where the effects of vegetation on land surface functioning is removed, I estimate the sensitivity of these entropy production rates to the presence of vegetation. Land averaged evapotranspiration decreases from 2.4 to 1.4 mm/d, while entropy production is reduced comparatively less from 4.2 to 3.1 mW/m<sup>2</sup>/K. This is related to the reduction in relative humidity of the atmospheric boundary layer as a compensatory effect, and points out the importance of a more complete treatment of entropy production calculations to investigate the role of biotic effects on Earth system functioning.

scholarly journals Impacts of urban land-surface forcing on ozone air quality in the Seoul metropolitan area

2013 ◽  
Vol 13 (4) ◽  
pp. 2177-2194 ◽  
Author(s):  
Y.-H. Ryu ◽  
J.-J. Baik ◽  
K.-H. Kwak ◽  
S. Kim ◽  
N. Moon
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Urban Area ◽  
Metropolitan Area ◽  
Land Surface ◽  
Urban Boundary Layer ◽  
Breeze Circulation ◽  
Air Masses ◽  
Elevated O3 ◽  
Seoul Metropolitan Area

Abstract. Modified local meteorology owing to heterogeneities in the urban–rural surface can affect urban air quality. In this study, the impacts of urban land-surface forcing on ozone air quality during a high ozone (O3) episode in the Seoul metropolitan area, South Korea, are investigated using a high-resolution chemical transport model (CMAQ). Under fair weather conditions, the temperature excess (urban heat island) significantly modifies boundary layer characteristics/structures and local circulations. The modified boundary layer and local circulations result in an increase in O3 levels in the urban area of 16 ppb in the nighttime and 13 ppb in the daytime. Enhanced turbulence in the deep urban boundary layer dilutes pollutants such as NOx, and this contributes to the elevated O3 levels through the reduced O3 destruction by NO in the NOx-rich environment. The advection of O3 precursors over the mountains near Seoul by the prevailing valley-breeze circulation in the mid- to late morning results in the build-up of O3 over the mountains in conjunction with biogenic volatile organic compound (BVOC) emissions there. As the prevailing local circulation in the afternoon changes to urban-breeze circulation, the O3-rich air masses over the mountains are advected over the urban area. The urban-breeze circulation exerts significant influences on not only the advection of O3 but also the chemical production of O3 under the circumstances in which both anthropogenic and biogenic (natural) emissions play important roles in O3 formation. As the air masses that are characterized by low NOx and high BVOC levels and long OH chain length are advected over the urban area from the surroundings, the ozone production efficiency increases in the urban area. The relatively strong vertical mixing in the urban boundary layer embedded in the sea-breeze inflow layer reduces NOx levels, thus contributing to the elevated O3 levels in the urban area.

Examination of the Physical Atmosphere in the Great Lakes Region and Its Potential Impact on Air Quality—Overwater Stability and Satellite Assimilation

2018 ◽  
Vol 57 (12) ◽  
pp. 2789-2816 ◽  
Author(s):  
Richard T. McNider ◽  
Arastoo Pour-Biazar ◽  
Kevin Doty ◽  
Andrew White ◽  
Yuling Wu ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Air Quality ◽  
Land Surface ◽  
Lake Michigan ◽  
Model Performance ◽  
Meteorological Model ◽  
Mixing Ratios ◽  
Chemical Models ◽  
Improve Model ◽  
Model Mixing

AbstractHigh mixing ratios of ozone along the shores of Lake Michigan have been a recurring theme over the last 40 years. Models continue to have difficulty in replicating ozone behavior in the region. Although emissions and chemistry may play a role in model performance, the complex meteorological setting of the relatively cold lake in the summer ozone season and the ability of the physical model to replicate this environment may contribute to air quality modeling errors. In this paper, several aspects of the physical atmosphere that may affect air quality, along with potential paths to improve the physical simulations, are broadly examined. The first topic is the consistent overwater overprediction of ozone. Although overwater measurements are scarce, special boat and ferry ozone measurements over the last 15 years have indicated consistent overprediction by models. The roles of model mixing and lake surface temperatures are examined in terms of changing stability over the lake. From an analysis of a 2009 case, it is tentatively concluded that excessive mixing in the meteorological model may lead to an underestimate of mixing in offline chemical models when different boundary layer mixing schemes are used. This is because the stable boundary layer shear, which is removed by mixing in the meteorological model, can no longer produce mixing when mixing is rediagnosed in the offline chemistry model. Second, air temperature has an important role in directly affecting chemistry and emissions. Land–water temperature contrasts are critical to lake and land breezes, which have an impact on mixing and transport. Here, satellite-derived skin temperatures are employed as a path to improve model temperature performance. It is concluded that land surface schemes that adjust moisture based on surface energetics are important in reducing temperature errors.

Sign in / Sign up

Export Citation Format

Share Document