Synthesis and Characterization of Calcium Carbonate Nanoparticles via Bacterial Mineralization in Steel Slag Comprising Cementitious Materials

2020 ◽  
Vol 12 (5) ◽  
pp. 760-768 ◽  
Author(s):  
Haihe Yi ◽  
Chun-Xiang Qian
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Compressive Strength ◽  
Calcium Carbonate ◽  
Building Materials ◽  
Average Particle Size ◽  
Steel Slag ◽  
Average Particle ◽  
Calcium Carbonate Precipitate ◽  
X Ray

Bacteria-induced mineralization is a new technique to produce calcium carbonate in steel slag for the preparation of building materials. Calcium carbonate nanoparticles were precipitated as a result of the enzymatic activity of Bacillus mucilaginous subtilis in steel slag. The crystal structure and morphology of the calcium carbonate precipitate were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), atomic force microscopy (AFM), while thermal properties were studied by thermogravimetric-differential scanning calorimetry (TG-DSC) analysis. The experimental results showed that the microstructure of calcium carbonate precipitate induced by the reproductive enzymes of Bacillus mucilaginous differs from the chemical precipitation in simulated pore solution of steel slag. Powder XRD patterns confirmed the formation of Bacillus mucilaginous subtilis-induced calcium carbonate with an average particle size of 42.1 nm, while the average particle size of the chemically synthesized calcium carbonate was 59.3 nm. Compared with the chemical synthesis, we found that the decomposition temperature of calcite by bacterial precipitation was higher than that for the chemically-precipitated calcite. The compressive strength improved with the amount of bacterial content. Bacterial mineralization could accelerate the rate of carbon sequestration in the mineralization process. The content of calcium carbonate in microbial mineralized steel slag increased obviously. The compressive strength of steel slag mortar with 1.5% bacterial reached up to 51.5 MPa, the compressive strength increased over 50% compared with the carbonized steel slag mortar. The micron-size calcite by bacterial mineralization resulted in a more compact structure. Our study suggests that microbial mineralization technology is a good method to utilize steel slag for building materials.

Morphology-Controlled CaCO3 Nanostructures by Modified Co-Precipitation in Pulsed Mode

2015 ◽  
Vol 752-753 ◽  
pp. 148-153
Author(s):  
M.M. Nassar ◽  
Taha Ebrahiem Farrag ◽  
M.S. Mahmoud ◽  
Sayed Abdelmonem
Keyword(s):  
Particle Size ◽  
Calcium Carbonate ◽  
Rotation Speed ◽  
Average Particle Size ◽  
Calcium Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray ◽  
Co Precipitation ◽  
Pulsed Mixing

Calcium carbonate nanoparticles and nanorods were synthesized by precipitation from saturated sodium carbonate and calcium nitrate aqueous solutions through co precipitation method. A new rout of synthesis was done by both using pulsed mixing method and controlling the addition of calcium nitrate. The effect of the agitation speed, and the temperature on particle size and morphology were investigated. Particles were characterized using X-ray Microanalysis, X-ray analysis (XRD) and scanning electron microscopy (SEM). The results indicated that increasing the mixer rotation speed from 3425 to 15900 (rpm) decreases the average particle size to 64±7 nm. A rapid nucleation then aggregation induced by excessive shear force phenomena could explain this observation. Moreover, by increasing the reaction temperature, the products were converted from nanoparticle to nanorods. The maximum attainable aspect ratio was 6.23 at temperature of 75°C and rotation speed of 3425. Generally, temperature raise promoted a significant homoepitaxial growth in one direction toward the formation of calcite nanorods. Overall, this study can open new avenues to control the morphology of the calcium carbonate nanostructures.

Structural, Optical and Magnetic Properties of Ni Doped ZnS Nanoparticles

2018 ◽  
Vol 24 (8) ◽  
pp. 5640-5644
Author(s):  
B Sreenivasulu ◽  
S. Venkatramana Reddy ◽  
P. Venkateswara Reddy
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Absorption Spectra ◽  
Spherical Surface ◽  
Room Temperature Ferromagnetism ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Chemical Compositions ◽  
Average Particle ◽  
X Ray

Pure ZnS and 3 mol% of Ni doped ZnS nano powders are prepared by chemical co-precipitation method. Properties of ZnS: Ni2+ nanoparticles are studied by X-ray diffraction Spectra (XRD), Raman spectroscopy (RS), Photoluminescence (PL), Absorption Spectra, Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDAX), Transmission electron microscopy (TEM) and Vibrating sample magnetometer (VSM). From XRD data, it conform the structure of ZnS, and particle size of pure and Ni doped ZnS data indicates the incorporation of Ni2+ in ZnS nanocrystal lattice. Raman spectra for pure and Ni doped samples exhibited vibrational modes confirm the structure of ZnS. Photoluminescence spectra reveal that the emission peaks are in UV and visible regions; this is confirming the absorption spectra. SEM micrographs show spherical morphology, and chemical compositions of samples are in stoichiometric proportions. TEM micro graphs show the spherical surface morphology and average particle size for pure and Ni2+ doped nanoparticles are in the range of 2–3 nm, this is good agreement with XRD results. M–H curves from VSM show room temperature ferromagnetism.

Hydrothermal Synthesis of Monodisperse α-Fe2O3 Nanoparticles

2011 ◽  
Vol 236-238 ◽  
pp. 1814-1817
Author(s):  
Hong Wang ◽  
Yan Jie ◽  
Hong Luo ◽  
Xue Feng
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Fourier Transform ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Hydrothermal Route ◽  
X Ray ◽  
Scanning Electron

Monodisperse α-Fe2O3nanoparticles with average particle size of 110 nm were successfully prepared using olyvinylpyrrolidone (PVP) as surfactant via a novel hydrothermal route. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM). The experiments results revealed that PVP and the concentration of NH4HCO3have played a crucial role in the formation of the monodisperse a-Fe2O3nanoparticles.

The Synthesis of Nano-Structured TiO2 Ceramics by Modified Two Step Sintering

2012 ◽  
Vol 500 ◽  
pp. 29-33
Author(s):  
Bao Rang Li ◽  
Xin Ming Xi ◽  
Yang Bai
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Scanning Electron

The nano-TiO2powders with the average particle size of about 40nm were used as starting materials. The compacted powders were firstly performed in Spark-plasma-sintering (SPS) at a high temperature and then sintered in air for hours at a relatively low temperature. The obtained samples were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed an obvious reduction in grain size was achieved by taking advantage of modified two step sintering (MTSS). The value of the relative grain growth d/do for the samples prepared by MTSS was less than 3.

A novel organothermal reduction process for producing nanocrystalline Ni2P with a circular-shaped flake morphology

1998 ◽  
Vol 13 (12) ◽  
pp. 3365-3367 ◽  
Author(s):  
Shu-Hong Yu ◽  
Jian Yang ◽  
Yong-Sheng Wu ◽  
Zhao-Hui Han ◽  
Lei Shu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Powder Diffraction ◽  
Average Particle Size ◽  
Reduction Process ◽  
Average Particle ◽  
X Ray ◽  
Transmission Electron ◽  
A Cell

An organothermal reduction process has been successfully developed for synthesis of nanocrystalline Ni2P in benzene at 140 °C. An x-ray powder diffraction pattern (XRD) indicated that the product was pure hexagonal Ni2P phase with a cell constants a =0.5866 and c = 0.3377 nm. Transmission electron microscopy (TEM) showed that the average particle size of the powders was 40 nm with a circular-shaped flake morphology.

Increased coercivity in recalcined barium ferrite–magnetite nanocomposites

2021 ◽  
Vol 112 (5) ◽  
pp. 384-390
Author(s):  
Mohammad Jafar Molaei ◽  
Abolghasem Ataie ◽  
Shahram Raygan
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Magnetic Properties ◽  
Barium Ferrite ◽  
Average Particle Size ◽  
Particle Morphology ◽  
High Energy ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray

Abstract In this research, mixtures of barium ferrite and graphite were milled in a high-energy mechanical milling machine. The effect of recalcination on the magnetic properties of the milled samples was studied. Phase analysis, phase transformations at high temperatures, particle size distribution, magnetic properties, and particle morphology were characterized by means of X-ray diffraction, hot stage X-ray diffraction, dynamic light scattering, vibrating sample magnetometry, high-resolution transmission electron microscopy, and field-emission scanning electron microscopy, respectively. A magnetic nanocomposite of BaFe12O19/Fe3O4 formed after 20 and 40 h milling. The average particle size for the 20 and 40 h milled samples reached 106 and 68 nm, respectively. Recalcination of the milled samples resulted in barium ferrite structure recovery. The decreased particle size due to the milling and subsequent recalcination results in increased coercivity values. The coercivity for the milled and calcined sample could increase more than 40% compared to as-received barium ferrite and reaches 3935 Oe for the sample calcined at 1050 °C.

scholarly journals Thermal, Structural, and Physical Properties of Freeze Dried Tropical Fruit Powder

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
K. A. Athmaselvi ◽  
C. Kumar ◽  
M. Balasubramanian ◽  
Ishita Roy
Keyword(s):  
Particle Size ◽  
Physical Properties ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Tropical Fruit ◽  
X Ray ◽  
Freeze Dried ◽  
Fruit Powder ◽  
Lcr Meter

This study evaluates the physical properties of freeze dried tropical (guava, sapota, and papaya) fruit powders. Thermal stability and weight loss were evaluated using TGA-DSC and IR, which showed pectin as the main solid constituent. LCR meter measured electrical conductivity, dielectric constant, and dielectric loss factor. Functional groups assessed by FTIR showed presence of chlorides, and O–H and N–H bonds in guava, chloride and C–H bond in papaya, and chlorides, and C=O and C–H bonds in sapota. Particle size and type of starch were evaluated by X-ray diffraction and microstructure through scanning electronic microscopy. A semicrystalline profile and average particle size of the fruit powders were evidenced by X-ray diffraction and lamellar/spherical morphologies by SEM. Presence of A-type starch was observed in all three fruits. Dependence of electric and dielectric properties on frequency and temperature was observed.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Ni/MWCNT-Supported Palladium Nanoparticles as Magnetic Catalysts for Selective Oxidation of Benzyl Alcohol

2013 ◽  
Vol 66 (5) ◽  
pp. 564 ◽  
Author(s):  
Mingmei Zhang ◽  
Qian Sun ◽  
Zaoxue Yan ◽  
Junjie Jing ◽  
Wei Wei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Benzyl Alcohol ◽  
Bimetallic Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Oxidation Of Benzyl Alcohol ◽  
Uniform Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Well dispersed Pd@Ni bimetallic nanoparticles on multi-walled carbon nanotubes (Pd@Ni/MWCNT) are prepared and used as catalysts for the oxidation of benzyl alcohol. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy analysis, and X-ray diffraction were performed to characterise the synthesised catalyst. The results show a uniform dispersion of Pd@Ni nanoparticles on MWCNT with an average particle size of 4.0 nm. The as synthesised catalyst was applied to the oxidation of benzyl alcohol. A 99 % conversion of benzyl alcohol and a 98 % selectivity of benzaldehyde were achieved by using the Pd@Ni/MWCNT (Pd: 0.2 mmol) catalyst with water as a solvent and H2O2 as oxidant at 80°C. The catalytic activity of Pd@Ni/MWCNT towards benzyl alcohol is higher than that of a Pd/MWCNT catalyst at the same Pd loadings. The catalyst can be easily separated due to its magnetic properties.

Characteristics of High Content Steel Briquettes Using Nanosized Solid Binders

2021 ◽  
Vol 21 (7) ◽  
pp. 3863-3867
Author(s):  
Seung-Ju Lim ◽  
Seong-Gyu Seo ◽  
Hyung-Sun Yoon
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Average Particle Size ◽  
Average Particle ◽  
Eds Analysis

In this study, we investigated the characteristics of high-content steel briquettes produced using various nanoscale solid binders and steel byproducts (SS, SCS, SLD, and BSD). The average particle size was 0.171 nm for S5, 0.065 nm for S1, 0.058 nm for S4, and 0.040 nm for S2 and S3. The SEM-EDS analysis of the solid power binder resulted in mostly rectangular images. The compressive strength of the high-content steel briquettes was 120 kgf/cm2, with the highest HSL1 using S4 binders. The compressive strength of the high-content steel briquettes was in the order of HSS4 > HSS1 > HSS3 > HSS5 > HSS2.

Sign in / Sign up

Export Citation Format

Share Document