Ni/MWCNT-Supported Palladium Nanoparticles as Magnetic Catalysts for Selective Oxidation of Benzyl Alcohol

2013 ◽  
Vol 66 (5) ◽  
pp. 564 ◽  
Author(s):  
Mingmei Zhang ◽  
Qian Sun ◽  
Zaoxue Yan ◽  
Junjie Jing ◽  
Wei Wei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Benzyl Alcohol ◽  
Bimetallic Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Oxidation Of Benzyl Alcohol ◽  
Uniform Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Well dispersed Pd@Ni bimetallic nanoparticles on multi-walled carbon nanotubes (Pd@Ni/MWCNT) are prepared and used as catalysts for the oxidation of benzyl alcohol. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy analysis, and X-ray diffraction were performed to characterise the synthesised catalyst. The results show a uniform dispersion of Pd@Ni nanoparticles on MWCNT with an average particle size of 4.0 nm. The as synthesised catalyst was applied to the oxidation of benzyl alcohol. A 99 % conversion of benzyl alcohol and a 98 % selectivity of benzaldehyde were achieved by using the Pd@Ni/MWCNT (Pd: 0.2 mmol) catalyst with water as a solvent and H2O2 as oxidant at 80°C. The catalytic activity of Pd@Ni/MWCNT towards benzyl alcohol is higher than that of a Pd/MWCNT catalyst at the same Pd loadings. The catalyst can be easily separated due to its magnetic properties.

Synthesis of Ni@MWCNTs Magnetic Nanocatalysts and their Catalytic Activity towards 4-Nitrophenol Reduction

2012 ◽  
Vol 531 ◽  
pp. 358-361 ◽  
Author(s):  
Ming Mei Zhang ◽  
Qian Sun ◽  
Ji Min Xie
Keyword(s):  
Electron Microscopy ◽  
Catalytic Activity ◽  
Average Particle Size ◽  
Chemical Vapor ◽  
High Catalytic Activity ◽  
Average Particle ◽  
Ni Nanoparticles ◽  
Nitrophenol Reduction ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

A well-dispersed Ni nanoparticles on multi-walled carbon nanotubes (Ni@MWCNTs) was prepared by chemical vapor deposition (CVD) method using a vacuum quartz tube furnace at the temperature of 600°C. The scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were performed to characterize the synthesized catalyst. It shows an unfirom dispersion of Ni nanoparticles on MWCNTs with the average particle size of 8.6 nm. The as synthesized catalyst was applied in a redox reaction of 4-nitrophenol, which showed very high catalytic activity, stability and well conversion. The catalyst can be easily separated due to the magnetical performance

Multiferroic Bismuth Ferrite Nanoparticles: Rapid Sintering Synthesis, Characterization, and Optical Properties

2010 ◽  
Vol 152-153 ◽  
pp. 81-85
Author(s):  
Xiong Wang ◽  
Yin Lin ◽  
Jin Guo Jiang
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Bifeo3 Nanoparticles ◽  
Rapid Sintering

The homogeneous multiferroic BiFeO3 nanoparticles with average particle size of 85 nm have been successfully synthesized by a simple sol-gel route. The prepared sample was characterized by a variety of techniques, such as X-ray diffractometry, thermogravimetric analysis and differential thermal analysis, differential scanning calorimeter analysis, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The obtained results shows that rapid sintering and subsequently quenching to room temperature are the two vital important factors for the preparation of pure BiFeO3. The magnetic phase transition (TN = 369 °C) and the ferroelectric phase transition (TC = 824.5 °C) were determined, revealing the antiferromagnetic and ferroelectric nature of the as-prepared BiFeO3 nanoparticles. The optical properties of the nanopowders were investigated. The strong band-gap absorption at 486 nm (2.55 eV) of the BiFeO3 nanoparticles may bring some novel applications.

Biosynthesis and Characterization of Copper Nanoparticles Using a Bioflocculant Extracted from Alcaligenis faecalis HCB2

2019 ◽  
Vol 11 (11) ◽  
pp. 1064-1070 ◽  
Author(s):  
Nkosinathi G. Dlamini ◽  
Albertus K. Basson ◽  
V. S. R. Rajasekhar Pullabhotla
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Copper Nanoparticles ◽  
Average Particle Size ◽  
Thermo Gravimetric Analysis ◽  
Average Particle ◽  
Gravimetric Analysis ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir

Bioflocculant from Alcaligenis faecalis HCB2 was used in the eco-friendly synthesis of the copper nanoparticles. Nanoparticles were characterized using a scanning electron microscope (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy, thermo gravimetric analysis (TGA) and Fourier Transform Infrared Spectroscopy (FT-IR). The transmission electron microscopy images showed close to spherical shapes with an average particle size of ∼53 nm. Energy-dispersive X-ray spectroscopy analysis confirmed the presence of the Cu nanopartilces and also the other elements such as O, C, P, Ca, Cl, Na, K, Mg, and S originated from the bioflocculant. FT-IR results showed the presence of the –OH and –NH2 groups, aliphatic bonds, amide and Cu–O bonds. Powder X-ray diffraction peaks confirmed the presence of (111) and (220) planes of fcc structure at 2 of 33° and 47° respectively with no other impurity peaks.

Facile Synthesis and Characterization of Spinel NiFe2O4 Nanoparticles and Studies of Their Photocatalytic Activity for Oxidation of Alcohols

2020 ◽  
Vol 12 (3) ◽  
pp. 357-365 ◽  
Author(s):  
Xiangrong Ma ◽  
Rui Dang ◽  
Jieying Liu ◽  
Fang Yang ◽  
Huigui Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Bet Analysis ◽  
Oxidation Of Alcohols ◽  
20 Nm ◽  
Adsorption Desorption

In this paper, we report a novel and facile approach for the synthesis of spinel NiFe2O4 nanoparticles and studies of its photocatalytic activity for oxidation of alcohols. The as-synthesized catalyst was thoroughly characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental mapping, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and N2 adsorption–desorption isotherm (BET) analysis. The TEM image reveals cubic shapes with an average particle size of 10–20 nm. The as-synthesized spinel NiFe2O4 has proved to be an excellent photocatalyst for oxidation of alcohol to the aldehyde with a conversion of 80% and selectivity of 99%. The catalyst has also proved to be noteworthy as it does not loss its catalytic activity even after five cycles of reuse.

Synthesis and Characteristics of Hierarchical Nanostructure Fe3O4 Coated Multi-Walled Carbon Nanotubes

2014 ◽  
Vol 926-930 ◽  
pp. 258-261
Author(s):  
Jing Heng Deng ◽  
Kan Ping Yu ◽  
Jian Guo Xie
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Solvothermal Process ◽  
X Ray ◽  
Hierarchical Nanostructure ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Hierarchical nanostructure Fe3O4/multi-walled carbon nanotubes (Fe3O4/MWCNTs) were prepared by solvothermal process using acid treated MWCNTs and iron acetylacetonate in ethylene glycol as reduction reagent. The materials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET). The results showed that petal-like hierarchical Fe3O4 grew on MWCNTs and the Fe3O4 nanoparticles had diameters in the range of 55-110 nm. It was a facile approach to grow hierarchical nanoFe3O4.

DIELECTRIC PROPERTIES OF ULTRAFINE Zn-DOPED CaCu3Ti4O12 CERAMIC

2012 ◽  
Vol 02 (01) ◽  
pp. 1250007 ◽  
Author(s):  
LAXMAN SINGH ◽  
U. S. RAI ◽  
K. D. MANDAL ◽  
MADHU YASHPAL
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Single Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sintered Powder

Ultrafine powder of CaCu2.80Zn0.20Ti4O12 ceramic was prepared using a novel semi-wet method. DTA/TG analysis of dry powder gives pre-information about formation of final product around 800°C. The formation of single phase was confirmed by X-ray diffraction analysis. The average particle size of sintered powder of the ceramic obtained from XRD and Transmission electron microscopy was found 59 nm and 102 nm, respectively. Energy Dispersive X-ray studies confirm the stoichiometry of the synthesized ceramic. Dielectric constant of the ceramic was found to be 2617 at room temperature at 1 kHz.

scholarly journals Synthesis of highly dispersed Pd nanoparticles supported on multi-walled carbon nanotubes and their excellent catalytic performance for oxidation of benzyl alcohol

2015 ◽  
Vol 5 (8) ◽  
pp. 4144-4153 ◽  
Author(s):  
Vijay M. Shinde ◽  
Emmanuel Skupien ◽  
Michiel Makkee
Keyword(s):  
Benzyl Alcohol ◽  
Pd Nanoparticles ◽  
Catalytic Performance ◽  
Simple Approach ◽  
Capping Agent ◽  
Oxidation Of Benzyl Alcohol ◽  
Highly Dispersed ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Excellent Catalytic Performance

A simple approach to synthesize highly dispersed Pd nanoparticles on CNTs without a capping agent is presented which exhibits high activity and selectivity for selective oxidation of benzyl alcohol.

Studies on conducting nanocomposite with gallium nitride–doped ferrite, part-II

2017 ◽  
Vol 231 (1) ◽  
pp. 53-63
Author(s):  
Rajani Indrakanti ◽  
V Brahmaji Rao ◽  
C Udaya Kiran
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gallium Nitride ◽  
Crystallite Size ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

This article (a sequel to part-I that appeared earlier in the same journal) presents synthesis and characterisation details of conducting PPY-nanocomposite obtained from gallium nitride–doped ferrite and polypyrrole. The GaN-doped ferrite is synthesised by sol–gel method. GaNFe2O3f-PPY composites are prepared by impregnation technique. Using the SciFinder software we could not trace any report in the literature for this synthesised Ga(2x + 2)NFe2(49 − x)O3-PPY nanocomposites. The doped nanoferrite is combined with polypyrrole, an intrinsic conducting polymer, in three proportions by percentage (70%:30%), (90%:10%) and (97%:3%), to obtain two series each of three compositions for the conducting PPY-nanocomposite. The synthesised polymer composites are characterised by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, selected area electron diffraction, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy. From our studies, it has been observed that the crystallite size of nanocomposites is decreased when compared to crystallite size of GaNFe2O3. The average particle size from histogram is in good agreement with Debye–Scherrer formula calculations. The scanning electron microscopy and transmission electron microscopy micrograms reveal that the particles are varying with the values of X and the percentage of PPY. The shapes observed are Globules,Tetrahedron,Nanorods of short and long lengths. The GaNFe2O3-PPY composites’ spectra revealed the shift in the band in comparison with the PPY spectra. Also, the wavelength is decreased, and vibrational frequency is increased.

Facile and surfactant-free synthesis of supported Pd nanoparticles on hydrotalcite for oxidation of benzyl alcohol

RSC Advances ◽  
2015 ◽  
Vol 5 (91) ◽  
pp. 74907-74915 ◽  
Author(s):  
Yufei He ◽  
Pengfei Yang ◽  
Jiaxuan Fan ◽  
Yanan Liu ◽  
Yiyun Du ◽  
...  
Keyword(s):  
Particle Size ◽  
Benzyl Alcohol ◽  
Average Particle Size ◽  
Pd Nanoparticles ◽  
Catalytic Performance ◽  
Solvent Free ◽  
Average Particle ◽  
Oxidation Of Benzyl Alcohol ◽  
Free Oxidation ◽  
Supported Pd

A Pd/HT catalyst with an average particle size of 2.3 nm and an electron-deficient Pd surface is synthesized by modified deposition–precipitation, and exhibits enhanced catalytic performance in the solvent-free oxidation of benzyl alcohol.

scholarly journals Microstructure and Mechanical Properties of Vacuum Hot Pressed P/M Short Steel Fiber Reinforced Aluminum Matrix Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
S. Jain ◽  
K. Chandra ◽  
V. Agarwala
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Pure Aluminum ◽  
Average Particle Size ◽  
Energy Dispersive ◽  
Aluminum Matrix Composites ◽  
Average Particle ◽  
Reaction Interface ◽  
X Ray ◽  
Scanning Electron

Commercial purity aluminum powder of irregular shape and ligamental morphology having average particle size of 75 µm was blended with medium carbon steel short fibers having average diameter of 100 µm and maximum length up to 1000 µm. The green compacts of pure aluminum and reinforced compositions were hot-pressed in 10−3 torr vacuum, at 723 K, 773 K, and 823 K for 5, 10, and 15 min durations under 50 MPa axial stress on Gleeble 3800 simulator. Microstructures of the sintered composites have been studied by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). The sintered compacts were characterized for densification behavior, hardness, and growth of FexAly reaction interface. Positive densification parameter was achieved for up to 10 wt.% reinforcement fraction. The maximum hardness of 51 Hv was achieved for 10 wt.% at 823 K for 15 min sintering time. The reaction interface was analysed by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). The reaction interface was found to be composed of Fe3Al, FeAl2, Fe2Al, Fe3Al, Fe4Al, Fe2Al5, and FeAl intermetallics. Growth of the reaction interface was diffusion-controlled which followed a nearly parabolic law with a rate constant of 1.41 × 10−12 m2 s−1 at 823 K.

Sign in / Sign up

Export Citation Format

Share Document