scholarly journals Biodegradable Nanomats Produced by Electrospinning: Expanding Multifunctionality and Potential for Tissue Engineering

2006 ◽  
Vol 6 (9) ◽  
pp. 2693-2711 ◽  
Author(s):  
N. Ashammakhi ◽  
A. Ndreu ◽  
A. Piras ◽  
L. Nikkola ◽  
T. Sindelar ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Electrospinning Process ◽  
Large Area ◽  
Tissue Engineering Scaffolds ◽  
Related Factors ◽  
Factors Affecting ◽  
Bioactive Scaffolds ◽  
Potential Applications ◽  
Process Factors

With increasing interest in nanotechnology, development of nanofibers (n-fibers) by using the technique of electrospinning is gaining new momentum. Among important potential applications of n-fiber-based structures, scaffolds for tissue-engineering represent an advancing front. Nanoscaffolds (n-scaffolds) are closer to natural extracellular matrix (ECM) and its nanoscale fibrous structure. Although the technique of electrospinning is relatively old, various improvements have been made in the last decades to explore the spinning of submicron fibers from biodegradable polymers and to develop also multifunctional drug-releasing and bioactive scaffolds. Various factors can affect the properties of resulting nanostructures that can be classified into three main categories, namely: (1) Substrate related, (2) Apparatus related, and (3) Environment related factors. Developed n-scaffolds were tested for their cytocompatibility using different cell models and were seeded with cells for to develop tissue engineering constructs. Most importantly, studies have looked at the potential of using n-scaffolds for the development of blood vessels. There is a large area ahead for further applications and development of the field. For instance, multifunctional scaffolds that can be used as controlled delivery system do have a potential and have yet to be investigated for engineering of various tissues. So far, in vivo data on n-scaffolds are scarce, but in future reports are expected to emerge. With the convergence of the fields of nanotechnology, drug release and tissue engineering, new solutions could be found for the current limitations of tissue engineering scaffolds, which may enhance their functionality upon in vivo implantation. In this paper electrospinning process, factors affecting it, used polymers, developed n-scaffolds and their characterization are reviewed with focus on application in tissue engineering.

Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried β-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds

2012 ◽  
Vol 512-515 ◽  
pp. 1821-1825
Author(s):  
Lin Zhang ◽  
Xue Min Cui ◽  
Qing Feng Zan ◽  
Li Min Dong ◽  
Chen Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Cross Linking ◽  
Tissue Engineering Scaffolds ◽  
Composite Microspheres ◽  
Chitosan Composite ◽  
Vitro Release

A novel microsphere scaffolds composed of chitosan and β-TCP containing vancomycin was designed and prepared. The β-TCP/chitosan composite microspheres were prepared by solid-in-water-in-oil (s/w/o) emulsion cross-linking method with or without pre-cross-linking process. The mode of vancomycin maintaining in the β-TCP/chitosan composite microspheres was detected by Fourier transform infrared spectroscopy (FTIR). The in vitro release curve of vancomycin in simulated body fluid (SBF) was estimated. The results revealed that the pre-cross-linking prepared microspheres possessed higher loading efficiency (LE) and encapsulation efficiency (EE) especially decreasing the previous burst mass of vancomycin in incipient release. These composite microspheres got excellent sphere and well surface roughness in morphology. Vancomycin was encapsulated in composite microspheres through absorption and cross-linking. While in-vitro release curves illustrated that vancomycin release depond on diffusing firstly and then on the degradation ratio later. The microspheres loading with vancomycin would be to restore bone defect, meanwhile to inhibit bacterium proliferation. These bioactive, degradable composite microspheres have potential applications in 3D tissue engineering of bone and other tissues in vitro and in vivo.

scholarly journals Feasibility of Spatially Offset Raman Spectroscopy for in Vitro and in Vivo Monitoring Mineralization of Bone Tissue Engineering Scaffolds

2016 ◽  
Vol 89 (1) ◽  
pp. 847-853 ◽  
Author(s):  
Zhiyu Liao ◽  
Faris Sinjab ◽  
Amy Nommeots-Nomm ◽  
Julian Jones ◽  
Laura Ruiz-Cantu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Raman Spectroscopy ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Engineering Scaffolds ◽  
In Vivo Monitoring

Fabricating high mechanical strength γ-Fe2O3 nanoparticles filled poly(vinyl alcohol) nanofiber using electrospinning process potentially for tissue engineering scaffold

2016 ◽  
Vol 32 (4) ◽  
pp. 411-428 ◽  
Author(s):  
Nor Hasrul Akhmal Ngadiman ◽  
Noordin Mohd Yusof ◽  
Ani Idris ◽  
Denni Kurniawan ◽  
Ehsan Fallahiarezoudar
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Young’S Modulus ◽  
Flow Rate ◽  
Vinyl Alcohol ◽  
Young's Modulus ◽  
Electrospinning Process ◽  
Poly Vinyl Alcohol ◽  
Tissue Engineering Scaffolds ◽  
Rotating Speed

The use of electrospinning has gained substantial interest in the development of tissue engineering scaffolds due to its ability to produce nanoscale fibers which can mimic the geometry of extracellular tissues. Besides geometry, mechanical property is one of the main elements to be considered when developing tissue engineering scaffolds. In this study, the electrospinning process parameter settings were varied in order to find the optimum setting which can produce electrospun nanofibrous mats with good mechanical properties. Maghemite (γ-Fe2O3) was mixed with poly(vinyl alcohol) and then electrospun to form nanofibers. The five input variable factors involved were nanoparticles content, voltage, flow rate, spinning distance, and rotating speed, while the response variable considered was Young’s modulus. The performance of electrospinning process was systematically screened and optimized using response surface methodology. This work truly demonstrated the sequential nature of designed experimentation. Additionally, the application of various designs of experiment techniques and concepts was also demonstrated. Results revealed that electrospun nanofibrous mats with maximum Young’s modulus (273.51 MPa) was obtained at optimum input settings: 9 v/v% nanoparticle content, 35 kV voltage, 2 mL/h volume flow rate, 8 cm spinning distance, and 3539 r/min of rotating speed. The model was verified successfully by performing confirmation experiments. The nanofibers characterization demonstrated that the nanoparticles were well dispersed inside the nanofibers, and it also showed that the presence of defects on the nanofibers can decrease their mechanical strength. The biocompatibility performance was also evaluated and it was proven that the presence of γ-Fe2O3 enhanced the cell viability and cell growth rate. The developed poly(vinyl alcohol)/γ-Fe2O3 electrospun nanofiber mat has a good potential for tissue engineering scaffolds.

Preparation of Electrospun Poly(ε-caprolactone)/Poly(trimethylene carbonate) Blend Scaffold for In Situ Vascular Tissue Engineering

2012 ◽  
Vol 629 ◽  
pp. 60-63
Author(s):  
Tao Jiang ◽  
Guo Quan Zhang ◽  
Hui Li ◽  
Ji Na Xun
Keyword(s):  
Tissue Engineering ◽  
Vascular Graft ◽  
Vascular Tissue ◽  
Electrospinning Process ◽  
Vascular Tissue Engineering ◽  
Trimethylene Carbonate ◽  
Scaffold Materials ◽  
Degradation Time

In the active field of vascular graft research, in situ vascular tissue engineering is a novel concept. This approach aims to use biodegradable synthetic materials. After implantation, the synthetic material progressively degrades and should be replaced by autologous cells. Poly (ε-caprolactone) (PCL) is often used for vascular graft because of its good mechanical strength and its biocompatibility. It is easily processed into micro and nano-fibers by electrospinning to form a porous, cell-friendly scaffold. However, the degradation time of polycaprolactone is too long to match the tissue regeneration time. In this study, poly (ε-caprolactone) /poly (trimethylene carbonate) (PTMC) blend scaffold materials have been prepared for biodegradable vascular graft using an electrospinning process. Because the degradation time of PTMC is shorter than PCL in vivo. The morphological characters of PCL/PTMC blend scaffold materials were investigated by scanning electron microscope (SEM). The molecular components and some physical characteristics of the blend scaffold materials were tested by FT-IR and DSC analysis.

Biodegradable Microfluidic Scaffolds with Tunable Degradation Properties from Amino Alcohol-based Poly(ester amide) Elastomers

2011 ◽  
Vol 1299 ◽  
Author(s):  
Jane Wang ◽  
Tatiana Kniazeva ◽  
Carly F. Campbell ◽  
Robert Langer ◽  
Jeffrey S. Ustin ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Biodegradable Polymers ◽  
Half Life ◽  
Microfluidic Devices ◽  
Gas Permeation ◽  
Microfluidic Channels ◽  
Tissue Engineering Scaffolds ◽  
Rapid Prototyping And Manufacturing ◽  
Degradation Properties

ABSTRACTBiodegradable polymers with high mechanical strength, flexibility and optical transparency, optimal degradation properties and biocompatibility are critical to the success of tissue engineered devices and drug delivery systems. In this work, microfluidic devices have been fabricated from elastomeric scaffolds with tunable degradation properties for applications in tissue engineering and regenerative medicine. Most biodegradable polymers suffer from short half life resulting from rapid and poorly controlled degradation upon implantation, exceedingly high stiffness, and limited compatibility with chemical functionalization. Here we report the first microfluidic devices constructed from a recently developed class of biodegradable elastomeric poly(ester amide)s, poly(1,3-diamino-2-hydroxypropane-co-polyol sebacate)s (APS), showing a much longer and highly tunable in vivo degradation half-life comparing to many other commonly used biodegradable polymers. The device is molded in a similar approach to that reported previously for conventional biodegradable polymers, and the bonded microfluidic channels are shown to be capable of supporting physiologic levels of flow and pressure. The device has been tested for degradation rate and gas permeation properties in order to predict performance in the implantation environment. This device is high resolution and fully biodegradable; the fabrication process is fast, inexpensive, reproducible, and scalable, making it the approach ideal for both rapid prototyping and manufacturing of tissue engineering scaffolds and vasculature and tissue and organ replacements.

scholarly journals A review of chitosan-, alginate-, and gelatin-based biocomposites for bone tissue engineering

2018 ◽  
Vol 5 (3-4) ◽  
pp. 97-109 ◽  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Repair ◽  
Bone Diseases ◽  
Natural Polymers ◽  
Antimicrobial Substances ◽  
Potential Applications

Bone diseases and injuries have a major impact on the quality of life. Classical treatments for bone repair/regeneration/replacement have various disadvantages. Bone tissue engineering (BTE) received a great attention in the last years. Natural polymers are intensively studied in this field due to their properties (biocompatibility, biodegradability, abundance in nature, high processability). Unfortunately, their mechanical properties are poor, which is why synthetic polymers or ceramics are added in order to provide the optimal compressive, elastic or fatigue strength. Moreover, growth factors, vitamins, or antimicrobial substances are also added to enhance the cell behavior (attachment, proliferation, and differentiation). In this review, new scientific results regarding potential applications of chitosan-, alginate-, and gelatin based biocomposites in BTE will be provided, along with their in vitro and/or in vivo tests.

scholarly journals Efficient in vivo vascularization of tissue-engineering scaffolds

2010 ◽  
Vol 5 (4) ◽  
pp. e52-e62 ◽  
Author(s):  
Anja Hegen ◽  
Anna Blois ◽  
Crina E. Tiron ◽  
Monica Hellesøy ◽  
David R. Micklem ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Tissue Engineering Scaffolds
Sign in / Sign up

Export Citation Format

Share Document