Some Aspects of Extraction Studies of Zr(IV) from HCl Medium Using TOA and Cyanex 921

2016 ◽  
Vol 22 (2) ◽  
pp. 530-532
Author(s):  
Bhikari Charan Bhatta ◽  
Sujata Mishra
Keyword(s):  
Cyanex 921 ◽  
Hcl Medium

The fluorimetric determination of cerium and terbium

1989 ◽  
Vol 54 (3) ◽  
pp. 616-621 ◽  
Author(s):  
Záviš Holzbecher
Keyword(s):  
Rare Earth ◽  
Detection Limit ◽  
Rare Earth Elements ◽  
Fluorimetric Determination ◽  
Fluorescence Maximum ◽  
Relative Standard ◽  
And Shifts ◽  
Hcl Medium ◽  
Fold Excess

It has been found that phosphoric acid decreases the first excitation maximum of Ce(III) at 256 nm, increases the second excitation maximum at 297 nm and shifts the fluorescence maximum from 350 to 346 nm. Under optimum conditions, with λexc = 297 nm and λem = 346 nm, Ce(III) can be determined fluorimetrically with a detection limit of 1.2 ng ml-1 in 12M-H3PO4 medium. No interference was observed from a 20-200 fold excess of HCl, H2SO4, Na, K, NH4+, Al and the rare earth elements. HNO3 interferes and Ce(IV) and Fe(III) interfere strongly. It follows from the stereofluorograms of Ce and Tb that the spectra of the two elements are practically independent. The detection limit for Tb(III) in 0.02-2.5M-H2SO4 medium for λexc = 222 nm and λem = 494 nm is 33 ng ml-1. No interference was observed from a 5-20 fold excess of Al3+ and the other rare earth elements. The determination is slightly less sensitive in H3PO4 or HCl medium. The relative standard deviation of the measurement for 10 ng ml-1 Ce(III) or 50 ng ml-1 Tb(III) is about 3%.

Innovative surfactant of Gemini-type for dissolution mitigation of steel in pickling HCl medium

2020 ◽  
Author(s):  
Medhat Kamel ◽  
Mohamed Hegazy ◽  
Salah Rashwan ◽  
Mohamed El Kotb
Keyword(s):  
Hcl Medium

Resonance Rayleigh Scattering Spectral Determination of As(V) Using Cu(II) as Catalyst

2013 ◽  
Vol 788 ◽  
pp. 23-26
Author(s):  
Gui Qing Wen ◽  
Ai Hui Liang
Keyword(s):  
Waste Water ◽  
Detection Limit ◽  
Spectral Method ◽  
Correlation Coefficient ◽  
Rayleigh Scattering ◽  
Resonance Rayleigh Scattering ◽  
Spectral Determination ◽  
Strong Resonance ◽  
Hcl Medium

In HCl medium and in the presence of CuSO4, Na3AsO4 can be reduced by NaH2PO2 to form As nanoparticles (AsNs) which exhibited a strong resonance Rayleigh scattering (RRS) peak at 370 nm. Under the chosen conditions, the increased intensity at 370 nm was linear to As5+ concentration in the range of 0.48-38.0×10-6 mol/L, with a regression equation of ΔI370nm = 82.3 CAs + 33.9, a correlation coefficient of 0.9878 and a detection limit of 2.0×10-7 mol/L As5+. The proposed method was applied to detect As5+ concentration in waste water, with simplicity, rapidity and accuracy. Thus, a novel RRS spectral method was established to determine As5+.

Experimental, DFT calculations and MC simulations concept of novel quinazolinone derivatives as corrosion inhibitor for mild steel in 1.0 M HCl medium

2020 ◽  
Vol 312 ◽  
pp. 113413 ◽  
Author(s):  
Nordine Errahmany ◽  
Mohamed Rbaa ◽  
Ashraf S. Abousalem ◽  
Abedlafi Tazouti ◽  
Mouhsine Galai ◽  
...  
Keyword(s):  
Dft Calculations ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Quinazolinone Derivatives ◽  
Hcl Medium

scholarly journals Green Approach to Corrosion Inhibition of Carbon Steel by Fucus spiralis extract in 1 M HCl Medium

2021 ◽  
Vol 12 (5) ◽  
pp. 7075-7091
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Adsorption Model ◽  
Corrosion Properties ◽  
Uv Visible ◽  
Fucus Spiralis ◽  
Hcl Medium

The extract of Fucus spiralis (FS) was tested as a corrosion inhibitor of carbon steel in a 1M HCl medium. The anti-corrosion properties were analyzed by gravimetric and electrochemical techniques such as potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The surface characterization of carbon steel submerged in the optimal solution was carried out using UV-Visible, UV-Vis-NIR, and Optical microscopy analyses. Electrochemical and gravimetric results demonstrated that inhibitory efficiencies increase with increasing inhibitor concentration and the efficiency reaches 87% at a concentration of 0.5 g/L. According to Tafel extrapolated polarisation measurements, the FS also worked as a mixed-type corrosion inhibitor and changed the mechanism of anodic reactions. EIS analysis showed that a depressed capacitive loop dominates the Nyquist plot of impedance and enhances the polarization resistance (Rp) to 161.9 Ω cm2 with a reduction of the double layer capacity (Cdl) of carbon steel to 61.8 μF/cm2. This protection is assured by an adsorption mechanism based on the isothermal Langmuir adsorption model, which positively affects the thermodynamic parameters. UV-Visible, UV-Vis-NIR analyses exhibited that inhibitor decreases the iron oxides like hematite, Magnetite, and Goethite, Maghemite, Lepidocrocite, δ-FeOOH of the metal surface and delays the dissolution of the bare metal of iron to the ferrous ions, notably that optical morphology showed that FS extract decreases the aggressivity of HCl.

Sign in / Sign up

Export Citation Format

Share Document