Prediction Technique of Concrete Compressive Strength Using Ultrasonic Pulse Velocity Method and Spectral Analysis of Surface Wave Method

2012 ◽  
Vol 13 (1) ◽  
pp. 556-559
Author(s):  
Hong Seong Uk ◽  
Jang Hyun Suk ◽  
Back Sang Ki ◽  
Cho Young Sang
Keyword(s):  
Compressive Strength ◽  
Spectral Analysis ◽  
Surface Wave ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Wave Method ◽  
Concrete Compressive Strength ◽  
Prediction Technique ◽  
Surface Wave Method

PENGKAJIAN KEKUATAN BETON STRUKTUR JEMBATAN PASCA KEBAKARAN

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Sudarmadi Sudarmadi
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Strength Assessment ◽  
Concrete Testing

In this paper a case study about concrete strength assessment of bridge structure experiencing fire is discussed. Assessment methods include activities of visual inspection, concrete testing by Hammer Test, Ultrasonic Pulse Velocity Test, and Core Test. Then, test results are compared with the requirement of RSNI T-12-2004. Test results show that surface concrete at the location of fire deteriorates so that its quality is decreased into the category of Very Poor with ultrasonic pulse velocity ranges between 1,14 – 1,74 km/s. From test results also it can be known that concrete compressive strength of inner part of bridge pier ranges about 267 – 274 kg/cm2 and concrete compressive strength of beam and plate experiencing fire directly is about 173 kg/cm2 and 159 kg/cm2. It can be concluded that surface concrete strength at the location of fire does not meet the requirement of RSNI T-12-2004. So, repair on surface concrete of pier, beam, and plate at the location of fire is required.

scholarly journals Assessment of Concrete Compressive Strength by Ultrasonic Non-Destructive Test

2021 ◽  
Vol 318 ◽  
pp. 03004
Author(s):  
AbdulMuttalib I. Said ◽  
Baqer Abdul Hussein Ali
Keyword(s):  
Compressive Strength ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Experimental Program ◽  
Concrete Compressive Strength ◽  
Statistical Program ◽  
Non Destructive ◽  
Accurate Relation

This paper has carried out an experimental program to establish a relatively accurate relation between the ultrasonic pulse velocity (UPV) and the concrete compressive strength. The program involved testing concrete cubes of (100) mm and prisms of (100×100×300) cast with specified test variables. The samples are tested by using ultrasonic test equipment with two methods, direct ultrasonic pulse (DUPV) and surface (indirect) ultrasonic pulse (SUPV) for each sample. The obtained results were used as input data in the statistical program (SPSS) to predict the best equation representing the relation between the compressive strength and the ultrasonic pulse velocity. In this research 383 specimens were tested, and an exponential equation is proposed for this purpose. The statistical program has been used to prove which type of UPV is more suitable, the (SUPV) test or the (DUPV) test, to represent the relation between the ultrasonic pulse velocity and the concrete compressive strength. In this paper, the effect of salt content on the connection between the ultrasonic pulse velocity and the concrete compressive strength has also been studied.

scholarly journals Analisis Hubungan Kecepatan Gelombang Dengan Kuat Tekan Beton Menggunakan Metode UPV

2020 ◽  
Vol 10 (1) ◽  
pp. 11
Author(s):  
Anggia Eta Rizkiasari ◽  
Abdul Rouf
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Method ◽  
Average Error ◽  
Strength Testing ◽  
Building Structures ◽  
Concrete Compressive Strength ◽  
Strength Based

Until now the use of concrete as a building material is still widely used for building structures. It is important to do concrete compressive strength testing as one of the factors to know the quality of a concrete. NDT (Non-Destructive Testing) is a method of solid quality testing without damaging the object. Testing with the NDT method is considered more efficient than the destructive test method. One method for performing NDT testing is by utilizing UPV (Ultrasonic Pulse Velocity).UPV is a method for estimating concrete compressive strength based on the ultrasonic pulse velocity relationship through concrete with the concrete compressive strength itself. UPV testing works by emitting ultrasonic pulses of 40 kHz through concrete to obtain the travel time of the pulse. Then the resulting time will be calculated the value of its speed and then will be converted into concrete compressive strength.Concrete compressive strength measurement system for high-quality concrete using UPV method can be designed by utilizing relation between ultrasonic pulse velocity with concrete compressive strength. Based on the test results, the average error value of concrete compressive strength testing is 3.04% with a maximum error of 6.63%.

Estimating the Concrete Compressive Strength by Using the Concrete Ultrasonic Pulse Velocity and Moduli of Elasticity

2021 ◽  
Vol 1164 ◽  
pp. 77-86
Author(s):  
Bogdan Bolborea ◽  
Sorin Dan ◽  
Claudiu Matei ◽  
Aurelian Gruin ◽  
Cornelia Baeră ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Testing ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
High Rate ◽  
Concrete Compressive Strength ◽  
Destructive Testing ◽  
Non Destructive ◽  
Moduli Of Elasticity

Developing a non-destructive method which delivers fast, accurate and non-invasive results regarding the concrete compressive strength, is an important issue, currently investigated by many researchers all over the world. Different methodologies, like using the simple non-destructive testing (NDT) or the fusion of different techniques approach, were taken into consideration in order to find the optimal, most suitable method. The purpose of this paper is to present a new approach in this direction. The methodology consists in predicting the concrete compressive strength through ultrasonic testing, for non-destructive determination of the dynamic and static moduli of elasticity. One important, basic assumption of the proposed methodology considers values provided by technical literature for concrete dynamic Poisson’s coefficient. The air-dry density was experimentally determined on concrete cores. The dynamic modulus of elasticity was also experimentally determined by using the ultrasonic pulse velocity (UPV) method on concrete cores. Further on, the static modulus of elasticity and the concrete compressive strength can be mathematically calculated, by using the previously mentioned parameters. The experimental procedures were performed on concrete specimens, namely concrete cores extracted from the raft foundation of a multistorey building; initially they were subjected to the specific NDT, namely ultrasonic testing, and the validation of the results and the proposed methodology derives from the destructive testing of the specimens. The destructive testing is generally recognized as the most trustable method. The precision of the proposed method, established with respect to the destructive testing, revealed a high level of confidence, exceeding 90% (as mean value). It was noticed that even the cores with compressive strength outside of mean range interval (minimum and maximum values) presented high rate of precision, not influencing the overall result. The high rate of accuracy makes this method a suitable research background for further investigations, in order to establish a reliable NDT methodology which could substitute the very invasive and less convenient, destructive method.

Adapting ANNs in SONREB Test to Estimate Concrete Compressive Strength

2018 ◽  
Vol 792 ◽  
pp. 166-169
Author(s):  
Yu Ren Wang ◽  
Loan T.Q. Ngo ◽  
Yi Fan Shih ◽  
Yen Ling Lu ◽  
Yi Ming Chen
Keyword(s):  
Compressive Strength ◽  
Estimation Error ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Percentage Error ◽  
Non Destructive Testing ◽  
Concrete Compressive Strength ◽  
Destructive Testing ◽  
Non Destructive

SONREB method is a non-destructive testing (NDT) method for estimating the concrete compressive strength. It is conducted by combining two popular NDT methods: ultrasonic pulse velocity (UPV) test and rebound hammer (RH) test. Several researches have been attempted to find the correlation of the different testing method data with actual compressive strength. This research proposes a new Artificial Intelligence based approach, Artificial Neural Networks (ANNs), to estimate the concrete compressive strength using the UPV and RH test data. Data from a total of 315 cylinder concrete samples are collected to develop and validate the ANFIS prediction model. The model prediction results are compared with actual compressive strength using mean absolute percentage error (MAPE). With the adaption of ANFIS, the estimation error of SONREB test can be reduced to 5.98% (measured by MAPE).

scholarly journals A new approach to estimate compressive strength of concrete by the UPV method

2016 ◽  
Vol 9 (3) ◽  
pp. 395-402 ◽  
Author(s):  
M. A. P. Irrigaray ◽  
R. C. de A. Pinto ◽  
I. J. Padaratz
Keyword(s):  
Compressive Strength ◽  
Cement Paste ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Concrete Compressive Strength ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Concrete Mixtures ◽  
Unique Relationship

ABSTRACT Although the ultrasonic pulse velocity (UPV) method has been extensively used to estimate concrete compressive strength, the relationship between UPV and concrete strength is mixture dependent. As a result, the applicability of this method to estimate strength is well known to be limited. Aggregate type, cement type, mixture proportions, and water-cement ratio influence such a relationship. Nevertheless, UPV and strength are both governed by cement hydration, and thus, a relationship between UPV in the cement paste phase and concrete compressive strength would be expected to exist. By not taking into account the type and volume content of aggregates, this relationship could be the same for concrete mixtures with same type of cement and water-cement ratio, regardless the aggregate type used. This study investigates the existence of such a relationship. Concrete mixtures with water-cement ratios of 0.48, 0.55 and 0.64, with different paste volumes were prepared in the laboratory. For each mixture, compressive strength and ultrasonic pulse velocity were evaluated at various ages. The UPV of each concrete phase: paste, fine aggregate, and coarse aggregate, was obtained through paste and mortar specimens. This study indicated that it is possible to establish a unique relationship between the UPV in cement paste phase and the concrete compressive strength. This unique relationship could be applied to several concrete mixtures, greatly expanding the use of the UPV method to estimate compressive strength.

Sign in / Sign up

Export Citation Format

Share Document