Enhancing the Anti-Erosive Properties of Fluoride and Stannous with the Polymer Carbopol

2020 ◽  
Vol 54 (3) ◽  
pp. 250-257 ◽  
Author(s):  
Daniele Mara da Silva Ávila ◽  
Marina Gullo Augusto ◽  
Rayssa Ferreira Zanatta ◽  
Tais Scaramucci ◽  
Idalina Vieira Aoki ◽  
...  
Keyword(s):  
Sodium Fluoride ◽  
Stannous Chloride ◽  
In Vitro Study ◽  
Human Saliva ◽  
Positive Control ◽  
Negative Control ◽  
Bovine Enamel ◽  
Erosion Protection ◽  
Erosive Effect

This in vitro study investigated whether Carbopol 980 polymer could potentiate the anti-erosive effect of solutions containing sodium fluoride (F) and sodium fluoride associated with stannous chloride (FS). The dissolution of hydroxyapatite treated with the experimental solutions (F [500 ppm F–], F + Carbopol [0.1%], FS [500 ppm F– + 800 ppm Sn2+], FS + Carbopol) was evaluated. Deionized water was the negative control, and a commercial mouth rinse (AmF/NaF/SnCl2; 500 ppm F + 800 ppm Sn2+; Elmex® Erosion Protection) was the positive control. The solutions were also evaluated in an erosion-rehardening protocol, with two treatments per day, using bovine enamel specimens (n = 15) and human saliva. The acid challenge was performed using 0.3% citric acid (pH 2.6) for 2 min. Microhardness was measured at different times: baseline, after the first erosive challenge, after treatment, and after the second erosive challenge. Based on microhardness values, the demineralization, rehardening, and protective potentials were calculated. The alkali-soluble fluoride on enamel surfaces was also measured. Data were analyzed using ANOVA and Tukey tests (α = 0.05). Groups treated with FS + Carbopol showed the lowest hydroxyapatite dissolution and the highest rehardening and protective potentials. The measurement of alkali-soluble fluoride on enamel surfaces was also higher in the FS + Carbopol group. Carbopol was able to significantly increase the protective effect of the fluoridated solutions in addition to optimizing the adsorption of fluoride on the enamel surface.

Anti-Erosive Effect of Solutions Containing Sodium Fluoride, Stannous Chloride, and Selected Film-Forming Polymers

2018 ◽  
Vol 53 (3) ◽  
pp. 305-313 ◽  
Author(s):  
Sávio J.C. Bezerra ◽  
Samira H. João-Souza ◽  
Idalina V. Aoki ◽  
Alessandra B. Borges ◽  
Anderson T. Hara ◽  
...  
Keyword(s):  
Sodium Fluoride ◽  
Stannous Chloride ◽  
Human Saliva ◽  
Negative Control ◽  
Zeta Potentials ◽  
Film Forming ◽  
All Solutions ◽  
Propylene Glycol Alginate ◽  
Erosive Effect ◽  
Hydroxyapatite Crystals

The aim of this study was to evaluate the anti-erosive effect of solutions containing sodium fluoride (F: 225 ppm F–), stannous chloride (Sn: 800 ppm Sn2+), and some film-forming polymers (Gantrez: Poly [methylvinylether-alt-maleic anhydride]; PGA: propylene glycol alginate; Plasdone: poly[vinylpyrrolidone]; and CMC: carboxymethylcellulose). Solutions were tested in an erosion-remineralization cycling model, using enamel and dentin specimens (n = 10, for each substrate). Distilled water was the negative control. Cycling consisted of 120 min immersion in human saliva, 5 min in 0.3% citric acid solution, and 120 min of exposure to human saliva, 4×/day, for 5 days. Treatment with solutions (pH = 4.5) was carried out 2×/day, for 2 min. Surface loss (SL) was evaluated with optical profilometry. Zeta potential of hydroxyapatite crystals was determined after treatment with the solutions. Data were statistically analyzed (α = 0.05). For enamel, all polymers showed significantly lower SL (in µm) than the control (11.09 ± 0.94), except PGA (10.15 ± 1.25). PGA significantly improved the protective effect of F (4.24 ± 0.97 vs. 5.64 ± 1.60, respectively). None of the polymers increased the protection of F+Sn (5.13 ± 0.78). For dentin, only Gantrez (11.40 ± 0.97) significantly reduced SL when compared with the negative control (12.76 ± 0.75). No polymer was able to enhance the effect of F (6.28 ± 1.90) or F+Sn (7.21 ± 1.13). All fluoridated solutions demonstrated significantly lower SL values than the control for both substrates. Treatment of hydroxyapatite nanoparticles with all solutions resulted in more negative zeta potentials than those of the control, except Plasdone, PGA, and F+Sn+PGA, the latter two presenting the opposite effect. In conclusion, Gantrez, Plasdone, and CMC exhibited an anti-erosive effect on enamel. PGA increased the protection of F. For dentin, only Gantrez reduced erosion.

scholarly journals Evaluation of Different Dentifrice Compositions for Increasing the Hardness of Demineralized Enamel: An in Vitro Study

2019 ◽  
Vol 7 (1) ◽  
pp. 14
Author(s):  
Pedro Henrique Cabral Oliveira ◽  
Marcia Regina Cabral Oliveira ◽  
Luiz Henrique Cabral Oliveira ◽  
Ravana Angelini Sfalcin ◽  
Marcelo Mendes Pinto ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Carious Lesions ◽  
Demineralized Enamel ◽  
Ph Cycling ◽  
Bovine Enamel ◽  
Knoop Indenter

This study aimed to evaluate microhardness of a dentifrice containing fluoride and arginine compared to a positive control (fluoride only) and a negative control (no fluoride) on sound and demineralized bovine enamel surfaces. Specimens were randomly assigned to different treatments that included daily pH cycling and brushing three times a day with one of the following dentifrices (n = 8): Neutraçucar (arginine and fluoride), Colgate Total 12 (fluoride) and My First Colgate (no fluoride). Enamel carious lesions were artificially created one week before the beginning of these treatments (demineralized bovine enamel (DE) groups). The same groups were also tested in sound enamel (sound bovine enamel (SE) groups). Microhardness was measured at baseline and after one, two, and five weeks of treatment using a Knoop indenter. Statistical analysis involved two-way Analysis of Variance (ANOVA) and Tukey’s test. After five weeks, both Total 12 and Neutraçucar had increased the microhardness of DE specimens (p < 0.05). Only Neutraçucar had increased the microhardness of the sound enamel after five weeks of treatment. Thus, it could be concluded that arginine-based dentifrices increase the microhardness of sound and demineralized bovine enamel surfaces.

scholarly journals Evaluation of coconut water neutralized by different agents on the viability of human fibroblasts: an in vitro study

2016 ◽  
Vol 45 (4) ◽  
pp. 234-239 ◽  
Author(s):  
Priscilla Barbosa Ferreira SOARES ◽  
Aletheia Moraes ROCHA ◽  
Manuella Verdinelli de Paula REIS ◽  
Camilla Christian Gomes MOURA ◽  
Carlos José SOARES
Keyword(s):  
Cell Viability ◽  
Tap Water ◽  
Human Fibroblasts ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Coconut Water ◽  
Ph Adjustment ◽  
Adjustment Method

Abstract Objective This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey’s and Dunnet’s test. Result There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.

Evaluating Dentin Surface Treatments for Resin-Modified Glass Ionomer Restorative Materials

2013 ◽  
Vol 38 (4) ◽  
pp. 429-438 ◽  
Author(s):  
TA Imbery ◽  
A Namboodiri ◽  
A Duncan ◽  
R Amos ◽  
AM Best ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Surface Treatments ◽  
Band Matrices ◽  
Dentin Surface ◽  
Occlusal Surfaces ◽  
Significant Difference

SUMMARY This in vitro study evaluated the effect of six surface treatments on the shear bond strength of three resin-modified glass ionomers (RMGIs) to dentin. Occlusal surfaces of caries-free third molars were reduced to expose only dentin. Surface treatments were smear layer intact (negative control), Cavity Conditioner, EDTA, Ketac Primer, Self Conditioner, and etching with 35% phosphoric acid followed by the application of Optibond Solo Plus. Filtek Z250 composite resin bonded with Optibond Solo Plus served as a positive control. Conditioning agents were used according to the manufacturers' instructions. After surface treatments, Fuji II LC, Riva LC, Ketac Nano, and Filtek Z250 were placed in copper-band matrices 5 mm in diameter and 2 mm in height and were light-cured for 20 seconds. Specimens were stored in 100% humidity for 24 hours, after which they were placed in deionized water for 24 hours at 37°C. They were then tested under shear forces in an Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. A two-way analysis of variance and Tukey honestly significant difference statistical analyses (p&lt;0.05) indicated significant interaction between RMGIs and conditioning agents. Acid etching followed by Optibond Solo Plus provided highest bond strengths for all three RMGIs, which were not statistically different from the positive control.

Effect of Different Intermediary Bases on Microleakage of a Restorative Material in Class II Box Cavities of Primary Teeth

2017 ◽  
Vol 40 (2) ◽  
pp. 82-87 ◽  
Author(s):  
Faika Y. Abdelmegid ◽  
Fouad S. Salama ◽  
Waleed M. Al-Mutairi ◽  
Saud K. Al-Mutairi ◽  
Sultan O. Baghazal
Keyword(s):  
Primary Teeth ◽  
In Vitro Study ◽  
Class Ii ◽  
Positive Control ◽  
Negative Control ◽  
The Other ◽  
Control Groups ◽  
Significant Difference ◽  
The Mean

Introduction The aim of this in vitro study was to assess and compare the effect of different intermediary bases on microleakage between tooth and a nanocomposite interface in Class II box cavities in primary teeth. Methods Standard Class II box cavities were prepared in 52 primary molars and randomly divided into 9 groups according to the intermediary base used (Multicore Flow, Fuji II LC, SDR, Smart Dentin Replacement, and Biodentine). All specimens were subjected to thermocycling and prepared for microleakage testing and evaluation. Results There was significant difference in the mean ranks of microleakage between the 9 groups, which was observed in the gingival side (p<0.0001) and the occlusal side (p<0.0001). The mean ranks microleakage was significantly higher with experimental SDR, experimental Multicore Flow, and positive control materials when compared with the other 6 groups. The microleakage mean ranks were statistically significantly lower in experimental Fuji II LC, experimental Biodentine, and all negative control groups when compared with the other 3 groups. Conclusions Microleakage is affected by the application of intermediate material. Experimental Biodentine and Fuji II LC showed the lowest microleakage while experimental SDR and experimental Multicore Flow showed the highest microleakage.

scholarly journals Microbiological Sealing Analysis of a Tapered Connection and External Hexagon System

2017 ◽  
Vol 2017 ◽  
pp. 1-4 ◽  
Author(s):  
Gardel Nepomuceno Costa ◽  
Elizabeth Ferreira Martinez ◽  
Aluísio Martins de Oliveira Ruellas ◽  
Daiane Cristina Peruzzo ◽  
Júlio Cesar Joly ◽  
...  
Keyword(s):  
Descriptive Analysis ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Microbiological Analysis ◽  
Significance Level ◽  
Implant Abutment ◽  
Bacterial Leakage ◽  
Tapered Connection

Considering the variety of implant connection systems available in the market and the contrasting literature regarding tapered connection systems in terms of bacterial leakage, the aim of this in vitro study was to compare the effectiveness of the bacterial seal at the implant/abutment interface between an external hexagon and a tapered connection system. Twelve sets of indexed tapered connection components and twelve sets of external hexagon connection components were used for microbiological analysis. In addition, for each model, an implant with its respective prosthetic abutment was used as a negative control and another as a positive control of microbial contamination. Failure of the abutment/implant interface seal was observed via turbidity or presence of deposits in the culture. Descriptive analysis of the data and relative frequency (percentage) as well as Fisher’s exact test were used at a significance level of 5%. Two of ten (20%) external hexagon specimens showed contamination against 0/10 (0%) tapered connection implants. In conclusion, both implant/abutment connections were able to prevent bacterial leakage in vitro.

scholarly journals Protective Effect of Whole and Fat-Free Fluoridated Milk, Applied before or after Acid Challenge, against Dental Erosion

2016 ◽  
Vol 50 (2) ◽  
pp. 111-116 ◽  
Author(s):  
Luiza P.S. Cassiano ◽  
Senda Charone ◽  
Juliana G. Souza ◽  
Ligia C. Leizico ◽  
Juliano P. Pessan ◽  
...  
Keyword(s):  
Dental Erosion ◽  
Positive Control ◽  
Negative Control ◽  
Nacl Solution ◽  
Time Of Application ◽  
Whole Milk ◽  
Significant Difference ◽  
Bovine Enamel ◽  
Protective Treatment

This study analysed in vitro the effect of milk against dental erosion, considering three factors: the type of milk (bovine whole/fat-free), the presence of different fluoride concentrations and the time of application (before/after erosive challenge). Bovine enamel (n = 15/group) and root dentine (n = 12/group) specimens were submitted to the following treatments: after the first erosive challenge - 0.9% NaCl solution (negative control), whole milk with 0, 2.5, 5.0 and 10.0 ppm F, fat-free milk with 0, 2.5, 5.0 and 10.0 ppm F, and 0.05% NaF solution (positive control); before the first erosive challenge - whole milk with 0, 2.5, 5.0 and 10.0 ppm F, fat-free milk with 0, 2.5, 5.0 and 10.0 ppm F, and 0.05% NaF solution (positive control). Specimens were submitted to demineralisation-remineralisation regimes 4 times/day for 5 days. The response variables were enamel and dentine loss (in micrometres). Data were analysed using Kruskal-Wallis/Dunn's test (p < 0.05). For enamel, whole milk containing 10 ppm F, applied before the erosive challenge, was the most protective treatment, but with no significant difference compared with the same treatment carried out after the erosive challenge. For dentine, whole fluoridated milk (all concentrations, after), fat-free 10 ppm F milk (after, before) and whole milk with or without F (except 2.5 ppm F, all before) significantly reduced dentine erosion. It seems that the presence of fluoride, especially at 10 ppm, is the most important factor in reducing dental erosion.

scholarly journals In vitro antimicrobial evaluation of toothpastes with natural compounds

2015 ◽  
Vol 09 (04) ◽  
pp. 580-586 ◽  
Author(s):  
Priscila de Camargo Smolarek ◽  
Luis Antonio Esmerino ◽  
Ana Cláudia Chibinski ◽  
Marcelo Carlos Bortoluzzi ◽  
Elizabete Brasil dos Santos ◽  
...  
Keyword(s):  
Therapeutic Potential ◽  
In Vitro Study ◽  
Study Groups ◽  
Natural Compounds ◽  
Antimicrobial Activities ◽  
Positive Control ◽  
Negative Control ◽  
Diffusion Method ◽  
Disk Diffusion Method

ABSTRACT Objectives: This in vitro study evaluated the antimicrobial effects of commercial toothpastes containing natural compounds. Materials and Methods: The study groups were divided based on the natural compound present in the toothpaste composition: Sorbitol (I), tocopherol (II), mint (III), cinnamon/mint (IV), propolis/melaleuca (V), mint/açai (VI), mint/guarana (VII), propolis (VIII), negative control (IX), and the positive control (X). The antimicrobial properties of the toothpastes were tested using the disk diffusion method against oral pathogens: Streptococcus mutans, Pseudomonas aeruginosa, and Enterococcus faecalis. The resulting inhibition halos were measured in millimeters. Results: The data indicated that the bacteria responded differently to the toothpastes (P < 0.0001). The diameters of the inhibition halos against S. mutans were in decreasing order of efficacy: Propolis/melaleuca > mint/guarana > mint/açai > sorbitol > tocopherol > cinnamon/mint > propolis > mint (P < 0.001 vs. negative control). E. faecalis showed variable responses to the dentifrices in the following order of decreasing efficacy: Mint/guarana > propolis > sorbitol > mint/açai > tocopherol > cinnamon/mint > mint = propolis/melaleuca = negative control. The product with the highest antimicrobial activity was mint/guarana, which was significantly different than propolis/melaleuca, mint, cinnamon/mint, and tocopherol and negative control (P < 0.001). The statistical analysis indicated that propolis, sorbitol, and mint/açai did not show any differences compared to mint/guarana (P > 0.05) and positive control (P > 0.05). P. aeruginosa was resistant to all dental gels tested including positive control. Conclusion: The toothpastes with natural compounds have therapeutic potential and need more detailed searches for the correct clinic therapeutic application. The results from this study revealed differences in the antimicrobial activities of commercial toothpastes with natural compounds.

scholarly journals Effects of a bleaching agent with calcium on bovine enamel

2014 ◽  
Vol 08 (03) ◽  
pp. 320-325 ◽  
Author(s):  
Larissa Alexandrino ◽  
Yasmin Gomes ◽  
Eliane Alves ◽  
Hilton Costi ◽  
Hervé Rogez ◽  
...  
Keyword(s):  
Artificial Saliva ◽  
In Vitro Study ◽  
Negative Control ◽  
Double Blind ◽  
Tristimulus Colorimetry ◽  
Mean Values ◽  
Significant Difference ◽  
Bovine Enamel ◽  
Bleaching Treatment

ABSTRACT Objective: This in vitro study analyzed the effects of a bleaching treatment containing 35% hydrogen peroxide (HP) with or without calcium on bovine enamel, using the Knoop hardness number (KHN), tristimulus colorimetry (TC), and scanning electron microscopy. Materials and Methods: Forty-five specimens were randomly divided into groups (n = 5), which included artificial saliva (negative control [NC]), 35% HP (positive control [PC]), and 35% HP Blue Calcium (HP Blue). The specimens were subjected to three bleaching sessions. During the sessions, the specimens were immersed in artificial saliva at 37°C. Before and after bleaching, KHN tests were conducted using a force of 25 gf for 5 s. TC was performed using the CIE-L*a*b* system and readouts were obtained at the following 4 time points: Before the bleaching treatment; after the first session, the second session, and the third session. The specimens were dehydrated and coated with gold, and the photomicrographs were analyzed in a double-blind manner with a LEO microscope. Results: Using one-way analysis of variance and Tukey's test (P < 0.05), a statistically significant difference was identified between the initial and final mean KHNs of the NC and PC groups, while the initial and final mean KHNs were not significantly different in the HP Blue group. The final mean values of ⋄E, ⋄L, and ⋄b of the PC and HP Blue groups were significantly higher than the initial values (P < 0.01 for both). The photomicrographs revealed no differences among the groups. Conclusions: Therefore, treatment with HP Blue prevented changes in the KHN without reducing the efficacy of bleaching.

In Vitro Study on Protoscolicidal Effect of Methanolic Extract of Allium hirtifolium on Protoscoleces of Cystic Echinococcosis

2019 ◽  
Vol 19 (3) ◽  
pp. 264-268
Author(s):  
Z. Shahamir Tabatabaei ◽  
S. Dehshahri ◽  
M.M. Taghi ◽  
F. Esfandiari ◽  
F.S. Sadjjadi ◽  
...  
Keyword(s):  
Cystic Echinococcosis ◽  
Allium Sativum ◽  
Methanolic Extract ◽  
In Vitro Study ◽  
Cyst Formation ◽  
Positive Control ◽  
Negative Control ◽  
Cyst Rupture ◽  
Allium Hirtifolium

Background: Cystic echinococcosis/ hydatidosis is one of the most important parasitic zoonoses worldwide. Usually, surgery is used for the treatment of active cysts. Due to the risk of cyst rupture during surgery, a protoscolicidal agent is usually injected into the cyst before surgery to prevent secondary cyst formation in case of cyst rupture. Due to the side effects of chemical protoscolicidal agents attempts have been focused on herbal medicine. In this regard, Allium sativum has already been used; however, the protoscolicidal effect of Allium hirtifolium from Allium family has not been investigated, so far. Objective: The present study was conducted in order to assess the protoscolicidal effect of methanolic extract of Allium hirtifolium in different concentrations, temperature and exposure times. Cetrimide as a positive control and DMSO as a negative control were also used in this study. Methods: The viability of protoscoleces was determined by 0.1% eosin staining method. Results: The protoscolicidal effect of Allium hirtifolium on protoscoleces was as follows: The mean percent and standard deviation (SD) of protoscolicidal activity of 50 mg/ml concentration of Allium hirtifolium extract in room temperature at 10, 20, 30, 40 and 50 minutes of exposure was 5.88±2.39, 8.59±4.54, 11.82±5.81, 12.31±6.16and 16.96±8.42 respectively; while at 37°C it was 9.10±5.01, 11.52±7.36, 18.64±4.36, 27.07±6.57 and 38.15±12.80, respectively. Conclusion: In conclusion, although Allium hirtifolium from Allium family is similar to Allium sativum; the protoscolicidal effect of its methanolic extract is not similar and less than A. sativum extract.

Sign in / Sign up

Export Citation Format

Share Document