scholarly journals Protective Effect of Whole and Fat-Free Fluoridated Milk, Applied before or after Acid Challenge, against Dental Erosion

2016 ◽  
Vol 50 (2) ◽  
pp. 111-116 ◽  
Author(s):  
Luiza P.S. Cassiano ◽  
Senda Charone ◽  
Juliana G. Souza ◽  
Ligia C. Leizico ◽  
Juliano P. Pessan ◽  
...  
Keyword(s):  
Dental Erosion ◽  
Positive Control ◽  
Negative Control ◽  
Nacl Solution ◽  
Time Of Application ◽  
Whole Milk ◽  
Significant Difference ◽  
Bovine Enamel ◽  
Protective Treatment

This study analysed in vitro the effect of milk against dental erosion, considering three factors: the type of milk (bovine whole/fat-free), the presence of different fluoride concentrations and the time of application (before/after erosive challenge). Bovine enamel (n = 15/group) and root dentine (n = 12/group) specimens were submitted to the following treatments: after the first erosive challenge - 0.9% NaCl solution (negative control), whole milk with 0, 2.5, 5.0 and 10.0 ppm F, fat-free milk with 0, 2.5, 5.0 and 10.0 ppm F, and 0.05% NaF solution (positive control); before the first erosive challenge - whole milk with 0, 2.5, 5.0 and 10.0 ppm F, fat-free milk with 0, 2.5, 5.0 and 10.0 ppm F, and 0.05% NaF solution (positive control). Specimens were submitted to demineralisation-remineralisation regimes 4 times/day for 5 days. The response variables were enamel and dentine loss (in micrometres). Data were analysed using Kruskal-Wallis/Dunn's test (p < 0.05). For enamel, whole milk containing 10 ppm F, applied before the erosive challenge, was the most protective treatment, but with no significant difference compared with the same treatment carried out after the erosive challenge. For dentine, whole fluoridated milk (all concentrations, after), fat-free 10 ppm F milk (after, before) and whole milk with or without F (except 2.5 ppm F, all before) significantly reduced dentine erosion. It seems that the presence of fluoride, especially at 10 ppm, is the most important factor in reducing dental erosion.

Aktivitas Antifungi Air Perasan Bawang Merah (Allium ascalonicum L.) Terhadap Candida albicans Secara In Vitro

2017 ◽  
Vol 9 (2) ◽  
pp. 71
Author(s):  
Nurhasanah Nurhasanah ◽  
Fauzia Andrini ◽  
Yulis Hamidy
Keyword(s):  
Candida Albicans ◽  
Antifungal Activity ◽  
Allium Sativum ◽  
Fungicidal Activity ◽  
Positive Control ◽  
Negative Control ◽  
Randomized Design ◽  
Significant Difference ◽  
Completely Randomized Design

Shallot (Allium ascalonicum L.) has been known as traditional medicine. Shallot which has same genus with garlic(Allium sativum L.) contains allicin that is also found in garlic and has been suspected has fungicidal activity toCandida albicans. It is supported by several researches. Therefore, shallot is suspected has antifungal activity too.The aim of this research was to know antifungal activity of shallot’s water extortion againsts Candida albicans invitro. This was a laboratory experimental research which used completely randomized design, with diffusion method.Shallot’s water extortion was devided into three concentrations, there were 50%, 100% and 200%. Ketoconazole 2%was positive control and aquadest was negative control. The result of this research based on analysis of varians(Anova), there was significant difference between several treatments and was confirmed with Duncan New MultipleRange Test (DNMRT) p<0,05, there was significant difference between 100% shallot’s water extortion with othertreatments, but there was no significant difference between 50% shallot’s water extortion with 200% shallot’s. Theconclusion was shallot’s water extortion had antifungal activity againsts Candida albicans with the best concentration100%, but it was lower than ketoconazole 2%.

Solutions and gels containing a sugarcane-derived cystatin (CaneCPI-5) reduce enamel and dentin erosion in vitro

2021 ◽  
Author(s):  
Lethycia Almeida Santos ◽  
Tatiana Martini ◽  
João Victor Frazão Câmara ◽  
Fabiana Navas Reis ◽  
Adriana de Cássia Ortiz ◽  
...  
Keyword(s):  
Artificial Saliva ◽  
Dental Erosion ◽  
Positive Control ◽  
New Approach ◽  
Enamel Erosion ◽  
Ph Cycling ◽  
Bovine Enamel ◽  
Dentin Erosion ◽  
Positive Controls

The effect of solutions and gels containing a sugarcane-derived cystatin (CaneCPI-5) on the protection against enamel and dentin erosion in vitro was evaluated. Bovine enamel and dentin specimens were divided into two groups (n=135 and 153/group for enamel and dentin, respectively) that were treated with solutions or chitosan gels containing 0.1 or 0.25 mg/ml CaneCPI-5. The positive controls for solutions and gels were Elmex Erosion Protection™ solution and NaF gel (12,300 ppm F), respectively. Deionized water and chitosan gel served as controls, respectively. The solutions were first applied on the specimens for 1 min and the gels for 4 min. Stimulated saliva was collected from 3 donors and used to form a 2 h acquired pellicle on the specimens. Then, the specimens were submitted to an erosive pH cycling protocol 4 times/day for 7 days (0.1% citric acid pH 2.5/90s, artificial saliva/2h, artificial saliva overnight). The solutions and gels were applied again during pH cycling, 2 times/day for 1 min and 4 min, respectively, after the first and last erosive challenges. Enamel and dentin losses (µm) were assessed by contact profilometry. Data were analyzed by 2-way ANOVA and Tukey´s test (p <0.05). All the treatments significantly reduced enamel and dentin loss in comparison with controls. Both CaneCPI-5 concentrations had a similar protective effect against enamel erosion, but only the higher concentration was as effective against dentin erosion as the positive control. Regarding the vehicles, only the 0.1 mg/ml gel performed worse than the positive control for dentin. CaneCPI-5 reduced enamel and dentin erosion to a similar extent as the fluoride-containing vehicles. However, dentin requires higher CaneCPI-5 concentrations, in the case of gels. Solutions or gels containing CaneCPI-5 might be a new approach to protect against dental erosion.

Evaluating Dentin Surface Treatments for Resin-Modified Glass Ionomer Restorative Materials

2013 ◽  
Vol 38 (4) ◽  
pp. 429-438 ◽  
Author(s):  
TA Imbery ◽  
A Namboodiri ◽  
A Duncan ◽  
R Amos ◽  
AM Best ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Surface Treatments ◽  
Band Matrices ◽  
Dentin Surface ◽  
Occlusal Surfaces ◽  
Significant Difference

SUMMARY This in vitro study evaluated the effect of six surface treatments on the shear bond strength of three resin-modified glass ionomers (RMGIs) to dentin. Occlusal surfaces of caries-free third molars were reduced to expose only dentin. Surface treatments were smear layer intact (negative control), Cavity Conditioner, EDTA, Ketac Primer, Self Conditioner, and etching with 35% phosphoric acid followed by the application of Optibond Solo Plus. Filtek Z250 composite resin bonded with Optibond Solo Plus served as a positive control. Conditioning agents were used according to the manufacturers' instructions. After surface treatments, Fuji II LC, Riva LC, Ketac Nano, and Filtek Z250 were placed in copper-band matrices 5 mm in diameter and 2 mm in height and were light-cured for 20 seconds. Specimens were stored in 100% humidity for 24 hours, after which they were placed in deionized water for 24 hours at 37°C. They were then tested under shear forces in an Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. A two-way analysis of variance and Tukey honestly significant difference statistical analyses (p&lt;0.05) indicated significant interaction between RMGIs and conditioning agents. Acid etching followed by Optibond Solo Plus provided highest bond strengths for all three RMGIs, which were not statistically different from the positive control.

Effect of Different Intermediary Bases on Microleakage of a Restorative Material in Class II Box Cavities of Primary Teeth

2017 ◽  
Vol 40 (2) ◽  
pp. 82-87 ◽  
Author(s):  
Faika Y. Abdelmegid ◽  
Fouad S. Salama ◽  
Waleed M. Al-Mutairi ◽  
Saud K. Al-Mutairi ◽  
Sultan O. Baghazal
Keyword(s):  
Primary Teeth ◽  
In Vitro Study ◽  
Class Ii ◽  
Positive Control ◽  
Negative Control ◽  
The Other ◽  
Control Groups ◽  
Significant Difference ◽  
The Mean

Introduction The aim of this in vitro study was to assess and compare the effect of different intermediary bases on microleakage between tooth and a nanocomposite interface in Class II box cavities in primary teeth. Methods Standard Class II box cavities were prepared in 52 primary molars and randomly divided into 9 groups according to the intermediary base used (Multicore Flow, Fuji II LC, SDR, Smart Dentin Replacement, and Biodentine). All specimens were subjected to thermocycling and prepared for microleakage testing and evaluation. Results There was significant difference in the mean ranks of microleakage between the 9 groups, which was observed in the gingival side (p<0.0001) and the occlusal side (p<0.0001). The mean ranks microleakage was significantly higher with experimental SDR, experimental Multicore Flow, and positive control materials when compared with the other 6 groups. The microleakage mean ranks were statistically significantly lower in experimental Fuji II LC, experimental Biodentine, and all negative control groups when compared with the other 3 groups. Conclusions Microleakage is affected by the application of intermediate material. Experimental Biodentine and Fuji II LC showed the lowest microleakage while experimental SDR and experimental Multicore Flow showed the highest microleakage.

scholarly journals Cleaved CD31 as a target for in vivo molecular imaging of inflammation

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Jonathan Vigne ◽  
Sylvie Bay ◽  
Rachida Aid-Launais ◽  
Guillaume Pariscoat ◽  
Guillaume Rucher ◽  
...  
Keyword(s):  
Molecular Imaging ◽  
Molecular Form ◽  
Positive Control ◽  
Negative Control ◽  
Stability Study ◽  
Biodistribution Studies ◽  
Wide Range ◽  
Significant Difference

AbstractThere is a need for new targets to specifically localize inflammatory foci, usable in a wide range of organs. Here, we hypothesized that the cleaved molecular form of CD31 is a suitable target for molecular imaging of inflammation. We evaluated a bioconjugate of D-P8RI, a synthetic peptide that binds all cells with cleaved CD31, in an experimental rat model of sterile acute inflammation. Male Wistar rats were injected with turpentine oil into the gastrocnemius muscle two days before 99mTc-HYNIC-D-P8RI (or its analogue with L-Proline) SPECT/CT or [18F]FDG PET/MRI. Biodistribution, stability study, histology, imaging and autoradiography of 99mTc-HYNIC-D-P8RI were further performed. Biodistribution studies revealed rapid elimination of 99mTc-HYNIC-D-P8RI through renal excretion with almost no uptake from most organs and excellent in vitro and in vivo stability were observed. SPECT/CT imaging showed a significant higher 99mTc-HYNIC-D-P8RI uptake compared with its analogue with L-Proline (negative control) and no significant difference compared with [18F]FDG (positive control). Moreover, autoradiography and histology revealed a co-localization between 99mTc-HYNIC-D-P8RI uptake and inflammatory cell infiltration. 99mTc-HYNIC-D-P8RI constitutes a new tool for the detection and localization of inflammatory sites. Our work suggests that targeting cleaved CD31 is an attractive strategy for the specific in vivo imaging of inflammatory processes.

scholarly journals In Vitro Evaluation of the Efficacy of Different Over-the-Counter Products on Tooth Whitening

2015 ◽  
Vol 26 (4) ◽  
pp. 373-377 ◽  
Author(s):  
Muhammet Karadas ◽  
Zeynep Yesil Duymus
Keyword(s):  
Repeated Measures ◽  
Positive Control ◽  
Negative Control ◽  
Carbamide Peroxide ◽  
Tooth Whitening ◽  
Over The Counter ◽  
Color Changes ◽  
Significant Difference ◽  
Cielab System

<p>This <italic>in vitro</italic> study evaluated the whitening effect of four different over-the-counter products compared with a 10% carbamide peroxide (CP) bleaching gel. Specimens obtained from bovine incisors were stained in a tea solution and randomly divided into six groups according to the product used (n=10): CT: conventional toothpaste (negative control); CWT: Crest 3D White toothpaste; CWR: Crest 3D White mouth rinse; CWS: Crest 3D White strips; DW: Dazzling White (paint-on gel); and OP: Opalescence PF 10% CP (at-home bleaching gel, positive control). Over-the-counter products and 10% CP were used according to the manufacturer's recommendations. Color measurements were performed according to the CIELab system using spectrophotometer after staining, and after 4 and 8 weeks of the treatment procedure. The ∆E, ∆L, ∆a, and ∆b values were calculated. The data obtained were analyzed by repeated-measures ANOVA. Tukey's test for multiple comparisons was applied (p<0.05). All groups, except CWT, were effective in tooth whitening in comparison with conventional toothpaste. There was no significant difference in tooth whitening between CWT and CT (p=0.93). CWS, DW and OP groups presented significantly higher color changes than the CWR group. DW and CWS showed similar tooth whitening to OP.</p>

scholarly journals The antifungal effect of roselle calyx extract on Trichophyton rubrum growth in vitro

2012 ◽  
Vol 10 (1) ◽  
pp. 17-22
Author(s):  
SITA AULIA SARI ◽  
RUBEN DHARMAWAN ◽  
PARAMASARI DIRGAHAYU
Keyword(s):  
Trichophyton Rubrum ◽  
Positive Control ◽  
Negative Control ◽  
Antifungal Effect ◽  
Inhibition Effect ◽  
Extract Concentration ◽  
Significant Difference ◽  
Object Of Study ◽  
One Way Anova

Sari SA, Dharmawan R, Dirgahayu P. 2012. The antifungal effect of roselle calyx extract on Trichophyton rubrum growth in vitro. Biofarmasi 10: 17-22. Dermatophytosis is a fungal infection on skin that one of them caused by Trichophyton rubrum. Dermatophytosis treatment by using chemical drugs has many shortcomings, such as a high cost and a drug resistance. Roselle (Hibiscus sabdariffa L.) calyx content was flavonoid, which have an antifungal effect. Flavonoids on roselle calyx include anthocyanin, gossypeptin (hexahydroxyflavone) 3-glucoside, flavonol glucoside hibiscritin, flavonoid gossypeptin, delphinidine 3-monoglucoside, cyanidin 3-monoglucoside. The objective of this study was to determine the effect of roselle calyx on Trichophyton rubrum growth in vitro. The study was performed as an experimental laboratory. The object of study was T. rubrum. The sample of T. rubrum colonies in this study was taken by a random sampling. The study used T. rubrum colonies on seven Sabouraud Dextrose Agar plates. Each plate had four holes. Each hole was filled by aquadest as a negative control, fluconazole 25 µg/mL as a positive control, and various roselle calyx extract concentrations (10%, 20%, 30%, 40% and 50%). The plates were incubated in an incubator with a temperature of 25oC for 7 days and measured for the diameter of roselle calyx extract inhibition effect. The data were collected and analyzed by One-way ANOVA and Least Significance Difference (LSD) tests on SPSS 16.0 for Windows. The result of One-way ANOVA test showed that there was a difference of inhibition diameter mean among all of the various roselle calyx extract concentration groups (p<0.05). The diameter of roselle calyx extract inhibition effect increased for each concentration up to 50%. The inhibition diameter of positive control compared to 20% roselle calyx extract concentration had no a significant difference. The study was concluded that roselle calyx extract has an antifungal effect to T. rubrum growth in vitro.

scholarly journals Spectrophotometric Analysis Evaluating Apical Microleakage in Retrograde Filling using GIC, MTA and Biodentine: An in-vitro study

2020 ◽  
Author(s):  
Manisha Nepal ◽  
Snigdha Shubham ◽  
Rupam Tripathi ◽  
Jwolan Khadka ◽  
Deepa Kunwar ◽  
...  
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Materials ◽  
Diamond Bur ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Supernatant Solution

Abstract Background The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs. Methods Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N= 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 minutes. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm. Results The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC> MTA> Biodentine> negative control group. The significant difference was observed between GIC and MTA (p=0.0001) and GIC and Biodentine (p=0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p=0.127) and Diamond bur (p=0.496) respectively. Conclusions Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

scholarly journals In vitro Evaluationof the Antimi- crobial Activity of a Topical Skin Preparation Containing 0.1% Polyhexanide vs a Topical Skin Prepa-ration Containing 1% Silver Sulfadiazine

2021 ◽  
Vol 6 (2) ◽  
pp. 1-7
Author(s):  
Barbara Maglione ◽  
Keyword(s):  
Antibacterial Activity ◽  
Positive Control ◽  
Negative Control ◽  
Silver Sulfadiazine ◽  
Bacterial Strains ◽  
Skin Preparation ◽  
E Coli ◽  
Topical Cream ◽  
Significant Difference

Aim: The effective in vitro antibacterial activity on Staphylococcus aureus (S.aureus), Pseudomonas aeruginosa (P.aeruginosa), Klebsiella pneumoniae (K.pneumoniae),Escherichia coli (E.Coli) and the combination of S.aureus and K. pneumonia of a topical cream based on 0.1% polyhexanidewas compared to a topical cream based on 1% silver sulfadiazine.A topical cream containing 0,1% gentamicin was used as a positive control and a white blank topical cream was used as negative control. Materials and Methods: The in vitro antibacterial activities were determined by agar well-diffusion assay. Two-way Analysis of Variance (ANOVA) was used to test, by calculation of P-values, for significant antiseptic activity in bacteria treated with 0.1% polyhexanide topical cream compared to 1% silver sulfadiazine and to the negative and positive controls. Results: Among the derivatives tested, all the active topical creams analyzed were able to reduce microbial strains. The topical cream based on 0.1% polyhexanide showed a significantly higher antibacterial efficacy in comparison to the topical cream based on 1% silver sulfadiazine on S. aureus and K. pneumonia and on the combination of S. aureus and K. pneumoniae,while no significant difference was detected between the antibacterial activity of the two topical creams against P. aeruginosa and E. coli. Conclusion: These results provide a further insight into the antibacterial activity of polyhexanide and its non-inferiority compared to silver sulfadiazine towards certain bacterial strains (P. aeruginosa and E. coli) and superiority towards other (S. aureus and K. pneumoniae)and support the use of 0.1% Polyhexanide topical preparation for the treatment of wounds that are infected or at risk of infection.

scholarly journals Effects of a bleaching agent with calcium on bovine enamel

2014 ◽  
Vol 08 (03) ◽  
pp. 320-325 ◽  
Author(s):  
Larissa Alexandrino ◽  
Yasmin Gomes ◽  
Eliane Alves ◽  
Hilton Costi ◽  
Hervé Rogez ◽  
...  
Keyword(s):  
Artificial Saliva ◽  
In Vitro Study ◽  
Negative Control ◽  
Double Blind ◽  
Tristimulus Colorimetry ◽  
Mean Values ◽  
Significant Difference ◽  
Bovine Enamel ◽  
Bleaching Treatment

ABSTRACT Objective: This in vitro study analyzed the effects of a bleaching treatment containing 35% hydrogen peroxide (HP) with or without calcium on bovine enamel, using the Knoop hardness number (KHN), tristimulus colorimetry (TC), and scanning electron microscopy. Materials and Methods: Forty-five specimens were randomly divided into groups (n = 5), which included artificial saliva (negative control [NC]), 35% HP (positive control [PC]), and 35% HP Blue Calcium (HP Blue). The specimens were subjected to three bleaching sessions. During the sessions, the specimens were immersed in artificial saliva at 37°C. Before and after bleaching, KHN tests were conducted using a force of 25 gf for 5 s. TC was performed using the CIE-L*a*b* system and readouts were obtained at the following 4 time points: Before the bleaching treatment; after the first session, the second session, and the third session. The specimens were dehydrated and coated with gold, and the photomicrographs were analyzed in a double-blind manner with a LEO microscope. Results: Using one-way analysis of variance and Tukey's test (P < 0.05), a statistically significant difference was identified between the initial and final mean KHNs of the NC and PC groups, while the initial and final mean KHNs were not significantly different in the HP Blue group. The final mean values of ⋄E, ⋄L, and ⋄b of the PC and HP Blue groups were significantly higher than the initial values (P < 0.01 for both). The photomicrographs revealed no differences among the groups. Conclusions: Therefore, treatment with HP Blue prevented changes in the KHN without reducing the efficacy of bleaching.

Sign in / Sign up

Export Citation Format

Share Document