Acquired Enamel Pellicle Modification with Casein and Mucin in Different Concentrations and its Impact on Initial Dental Erosion

2019 ◽  
Vol 53 (4) ◽  
pp. 457-466 ◽  
Author(s):  
Kevin R. Sieber ◽  
Christoph Schmidt ◽  
Tommy Baumann ◽  
Adrian Lussi ◽  
Thiago S. Carvalho
Keyword(s):  
Protective Effect ◽  
Calcium Release ◽  
In Vitro Study ◽  
Negative Control ◽  
Molar Ratio ◽  
Pellicle Formation ◽  
Surface Reflection ◽  
Whole Saliva ◽  
H 30

Casein and mucin have been shown to improve the erosion-protective properties of the pellicle when applied in combination. The aim of this in vitro study was to optimize the concentrations of these 2 proteins to achieve a maximum protective effect. For the 2 parts of this study, we prepared a total of 195 human enamel specimens and randomly assigned them to 13 groups, corresponding to 11 different casein-mucin concentration-combinations tested and 2 negative control groups (humid chamber). They underwent 5 cycles, consisting of pellicle formation from human whole saliva (2 h, 30°C), modification of the pellicle with casein and mucin in different concentrations (immersion in protein solutions for 2 h, 30°C), and erosion for 1 min in citric acid (0.65%, pH 3.5, 30°C). Surface microhardness (SMH), surface reflection intensity (SRI), and in the first part also calcium release were monitored during the cycling process, and analyzed with Kruskal-Wallis and post hoc Dunn’s tests. The results suggest that the best concentrations to achieve the highest erosion-protective effect are 3.0% casein and 0.81% mucin, which lead to a significant protection as measured by SMH as well as SRI compared to the unmodified pellicle. For the calcium release, no significant differences were found. This concentration combination corresponds to a general raise of the protein concentrations and a change in the molar ratio of the proteins as compared to earlier studies. Casein and mucin could now be incorporated at the determined concentration as natural ingredients in oral care products designed to protect against erosion.

Is the Erosion-Protective Effect Still Maintained when Tin Concentrations Are Reduced in Mouth Rinse Solutions?

2021 ◽  
pp. 1-6
Author(s):  
Corina Moser ◽  
Tommy Baumann ◽  
Adrian Lussi ◽  
Thiago Saads Carvalho
Keyword(s):  
Surface Hardness ◽  
In Vitro Study ◽  
Preventive Measure ◽  
Negative Control ◽  
Control Group ◽  
Mouth Rinse ◽  
Protective Effects ◽  
Pellicle Formation ◽  
Surface Reflection

<b><i>Objective:</i></b> As a preventive measure, tin (Sn<sup>2+</sup>)-containing products have a great potential to prevent enamel surface loss during erosive challenges, but adverse effects of high Sn<sup>2+</sup> concentrations, such as astringent feeling of the teeth, are reported. Therefore, the main aim of this in vitro study was to develop a solution with lower Sn<sup>2+</sup> concentrations that can still prevent dental erosion. <b><i>Methods:</i></b> A total of 162 enamel specimens were prepared from human premolars, which were selected from a pool of extracted teeth. The specimens were randomly distributed to 9 groups (each group <i>n</i> = 18 enamel specimens) according to the different test treatments: a humid chamber (no treatment) as the negative control, the commercial Elmex® Erosion Protection mouth rinse as the positive control, and 7 solutions either with lower Sn<sup>2+</sup> concentrations and/or containing flavoring. The experiment included 4 cycles, consisting of pellicle formation by incubating the specimens with 200 μL of human saliva at 37°C for 1 h, then placing the specimens in the treatment for 2 min (60 mL, 30°C, shaking at 70 rpm), and later submitting them to an erosive challenge for 1 min in citric acid (60 mL 1%, pH 3.6, 30°C). Surface hardness was measured with a Vickers diamond and surface reflection intensity was measured with a reflectometer. <b><i>Results:</i></b> The control group performed significantly worse than all other solutions containing Sn<sup>2+</sup>. In general, there were no significant differences among the Sn<sup>2+</sup>-containing groups, and they presented similar protective effects on the enamel even when Sn<sup>2+</sup> concentrations were reduced and flavorings were added. <b><i>Conclusion:</i></b> Sn<sup>2+</sup> concentrations in mouth rinses may be lowered to 200 ppm without compromising the anti-erosive properties of the solution.

scholarly journals Caries infiltrant combined with conventional adhesives for sealing sound enamel in vitro

2013 ◽  
Vol 83 (5) ◽  
pp. 858-863 ◽  
Author(s):  
Enver Yetkiner ◽  
Florian Just Wegehaupt ◽  
Rengin Attin ◽  
Thomas Attin
Keyword(s):  
Protective Effect ◽  
In Vitro Study ◽  
Negative Control ◽  
Protective Measures ◽  
Low Viscosity ◽  
Monomer Content ◽  
Bovine Enamel ◽  
Mineral Loss ◽  
Better Than

ABSTRACT Objective: To test the null hypothesis that combining low-viscosity caries infiltrant with conventional adhesive resins would not improve sealing of sound enamel against demineralization in vitro. Materials and Methods: Bovine enamel discs (N  =  60) with diameter of 3 mm were randomly assigned to six groups (n  =  10). The discs were etched with 37% phosphoric acid for 30 seconds and treated with resins of different monomer content forming the following groups: (1) Icon (DMG), (2) Transbond XT Primer (3M ESPE), (3) Heliobond (Ivoclar Vivadent), (4) Icon + Transbond XT Primer, and (5) Icon + Heliobond. Untreated etched samples served as the negative control. Specimens were subjected to demineralization by immersion in hydrochloric acid (pH 2.6) for 80 hours. Calcium dissolution into the acid was assessed by colorimetric analysis using Arsenazo III method at 16-hour intervals. Groups presenting high protection against demineralization were subjected to further acidic challenge for 15 days with calcium measurements repeated at 24-hour intervals. Data were analyzed by Kruskal-Wallis test and Mann-Whitney U-test. Results: Untreated specimens showed the highest amount of demineralization. Icon and Transbond XT primer decreased the mineral loss significantly compared to the control. Heliobond performed significantly better than both Icon and Transbond XT primer. Combination of Icon both with Transbond XT primer or Heliobond served as the best protective measures and maintained the protective effect for the additional 15-day acidic challenge. Conclusions: Within the limitations of this in vitro study, it could be concluded that the use of low-viscosity caries infiltrant prior to application of the tested conventional adhesives increases their protective effect against demineralization.

scholarly journals Protective effect of titanium tetrafluoride and silver diamine fluoride on radiation-induced dentin caries in vitro

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Beatriz Martines de Souza ◽  
Mayara Souza Silva ◽  
Aline Silva Braga ◽  
Patrícia Sanches Kerges Bueno ◽  
Paulo Sergio da Silva Santos ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Protective Effect ◽  
Acid Production ◽  
Lactic Acid Production ◽  
Negative Control ◽  
Titanium Tetrafluoride ◽  
Silver Diamine Fluoride ◽  
Dentin Caries ◽  
Radiation Induced

AbstractThis in vitro study evaluated the protective effect of titanium tetrafluoride (TiF4) varnish and silver diamine fluoride (SDF) solution on the radiation-induced dentin caries. Bovine root dentin samples were irradiated (70 Gy) and treated as follows: (6 h): 4% TiF4 varnish; 5.42% NaF varnish; 30% SDF solution; placebo varnish; or untreated (negative control). Microcosm biofilm was produced from human dental biofilm (from patients with head-neck cancer) mixed with McBain saliva for the first 8 h. After 16 h and from day 2 to day 5, McBain saliva (0.2% sucrose) was replaced daily (37 °C, 5% CO2) (biological triplicate). Demineralization was quantified by transverse microradiography (TMR), while biofilm was analyzed by using viability, colony-forming units (CFU) counting and lactic acid production assays. The data were statistically analyzed by ANOVA (p < 0.05). TiF4 and SDF were able to reduce mineral loss compared to placebo and the negative control. TiF4 and SDF significantly reduced the biofilm viability compared to negative control. TiF4 significantly reduced the CFU count of total microorganism, while only SDF affected total streptococci and mutans streptococci counts. The varnishes induced a reduction in lactic acid production compared to the negative control. TiF4 and SDF may be good alternatives to control the development of radiation-induced dentin caries.

scholarly journals Genotoxic and Chemopreventive Effects of Vochysia divergens Leaves (Pantanal, Brazil)

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
Pollyanna Francielli de Oliveira ◽  
Suzana Amorim Mendes ◽  
Nathália Oliveira Acésio ◽  
Luis Claudio Kellner Filho ◽  
Leticia Pereira Pimenta ◽  
...  
Keyword(s):  
Protective Effect ◽  
Skin Diseases ◽  
Chemical Constituents ◽  
Test System ◽  
Negative Control ◽  
Control Group ◽  
Xtt Assay ◽  
Vochysia Divergens

The medicinal plant Vochysia divergens is a colonizing tree species of the Pantanal, a unique and little explored wetland region in Brazil. This species is used in folk medicine as syrups and teas to treat respiratory infections, digestive disorders, asthma, scarring, and skin diseases. The objectives of this study were to evaluate the antioxidant, cytotoxic, and genotoxic potential of the ethanolic extract of Vochysia divergens leaves (VdE), as well as the influence of VdE and its major component (the flavone 3′,5-dimethoxy luteolin-7-O-β-glucopyranoside; 3′5 DL) on MMS-induced genotoxicity. The extract significantly reduced the viability of V79 cells in the colorimetric XTT assay at concentrations ≥ 39 μg/mL. A significant increase in micronucleus frequencies was observed in V79 cell cultures treated with VdE concentrations of 160 and 320 μg/mL. However, animals treated with the tested doses of VdE (500, 1000, and 2000 mg/kg b.w.) exhibited frequencies that did not differ significantly from those of the negative control group, indicating the absence of genotoxicity. The results also showed that VdE was effective in reducing MMS-induced genotoxicity at concentrations of 20, 40, and 80 μg/mL in the in vitro test system and at a dose of 15 mg/kg b.w. in the in vivo test system. Its major component 3′5 DL exerted no protective effect, suggesting that it is not responsible for the effect of the extract. The results of the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay showed that VdE was able to scavenge 92.6% of free radicals. In conclusion, the results suggest that the protective effect of VdE may be related, at least in part, to the antioxidant activity of its chemical constituents.

scholarly journals Evaluation of coconut water neutralized by different agents on the viability of human fibroblasts: an in vitro study

2016 ◽  
Vol 45 (4) ◽  
pp. 234-239 ◽  
Author(s):  
Priscilla Barbosa Ferreira SOARES ◽  
Aletheia Moraes ROCHA ◽  
Manuella Verdinelli de Paula REIS ◽  
Camilla Christian Gomes MOURA ◽  
Carlos José SOARES
Keyword(s):  
Cell Viability ◽  
Tap Water ◽  
Human Fibroblasts ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Coconut Water ◽  
Ph Adjustment ◽  
Adjustment Method

Abstract Objective This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey’s and Dunnet’s test. Result There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.

scholarly journals An In-Vitro Study of Molecular Effects of a Combination Treat-ment with Antibiotics and Nanofluid Containing Carbon Nano-tubes on Klebsiella pneumoniae

2021 ◽  
Author(s):  
Maryam Mehdizadeh ◽  
Mojgan Sheikhpour ◽  
Iman Salahshourifar ◽  
Seyed Davar Siadat ◽  
Parvaneh Saffarian
Keyword(s):  
Klebsiella Pneumoniae ◽  
Virulence Genes ◽  
Ultrasonic Method ◽  
Virulence Gene ◽  
In Vitro Study ◽  
Negative Control ◽  
Resistant Isolate ◽  
Simultaneous Treatment ◽  
Virulence Gene Expression

Background: We aimed to prepare a nanofluid, containing f-MWCNTs, and investigate the antibacterial efficacy of f-MWCNTs+ ciprofloxacin (cip) on Klebsiella pneumoniae by evaluating the virulence gene expression. Methods: This study was carried out from 2019 to 2020, in the Department of Mycobacteriology and Pulmonary Research, Pasteur Institute of Iran. The nanofluid containing antibiotic and f-MWCNTs were prepared by the ultrasonic method. The minimum inhibitory concentrations (MICs) of ciprofloxacin and f-MWCNTs were determined using the broth micro dilution MIC tests. For examining the antibacterial effects, the expression level of virulence genes, under the influence of f-MWCNTs, was evaluated by a real-time PCR. Results: The effect of 8 µg/ml ciprofloxacin + 400 µg/ml f-MWCNTs, completely inhibited the growth of the resistant isolate of K. pneumoniae, while, in the ATCC 700,603 isolate, 2 µg/ml ciprofloxacin with 100 µg/ml f-MWCNT could inhibit a bacterial growth. In the resistant K. pneumoniae clinical isolate, after f-MWCNT+cip treatment, the expression of fimA, fimD, wza, and wzi genes was significantly downregulated, compared to the ciprofloxacin treatment, and upregulated, compared to the negative control. For the ATCC 700,603 isolate treated with f-MWCNT+cip, the expression of fimA, fimD and wza virulence genes showed upregulation, compared to the negative control and downregulated in comparison with the ciprofloxacin treatment. Conclusion: Simultaneous treatment of resistant isolate of K. pneumoniae with f-MWCNTs +antibiotic could improve the effectiveness of antibiotic at lower doses, due to the reduced expression of virulence genes in comparison with antibiotic treatment, besides the increased cell wall permeability to antibiotics.

Comparative Evaluation of the Antimicrobial Effects of Different Mouthrinses against Streptococcus Mutans: An in Vitro Study

2019 ◽  
Vol 43 (6) ◽  
pp. 398-407
Author(s):  
Eman Abu-obaid ◽  
Fouad Salama ◽  
Ala’a Abu-obaid ◽  
Fars Alanazi ◽  
Mounir Salem ◽  
...  
Keyword(s):  
Reference Strain ◽  
In Vitro Study ◽  
Negative Control ◽  
Minimal Bactericidal Concentration ◽  
Distilled Water ◽  
Chlorhexidine Digluconate ◽  
Zone Of Inhibition ◽  
Antimicrobial Effects ◽  
Zones Of Inhibition

Purpose: To assess the antimicrobial effects of different natural and semi-natural mouthrinses on isolates of S. mutans obtained from the saliva of Saudi children and reference strains of S mutans (ATCC 25175). Study design: Saliva samples were collected from 20 children. Natural and semi-natural mouthrinses included were herbal mix mouthrinse, cranberry mouthrinse, chlorhexidine digluconate mouthrinse, cranberry extract mixed with chlorhexidine digluconate mouthrinse, chlorhexidine digluconate mouthrinse with alcohol (positive control), and distilled water (negative control). The microbiological examination tests were minimal inhibitory concentration, minimal bactericidal concentration, and zone of inhibition for the saliva isolates of S. mutans while zone of inhibition test only for reference strain of S. mutans. Results: For reference strain in a comparison with the distilled water, the herbal mix, cranberry, cranberry mixed with chlorhexidine, chlorhexidine, and chlorhexidine with alcohol showed significantly increased zones of inhibition by 36.38, 36.25, 26.13, 17.75, and 12.38, respectively. For saliva isolates in a comparison with the distilled water, the herbal mix, cranberry, cranberry mixed with chlorhexidine, chlorhexidine, and chlorhexidine with alcohol showed significantly increased zones of inhibition by 38.00, 34.25, 22.94, 16.50, and 16.44, respectively. Chlorhexidine with alcohol showed significantly lower minimum inhibitory and bactericidal concentration than the other groups. Conclusions: Herbal mix and cranberry mouthrinses could be effective natural alternative to chlorhexidine mouthrinse with or without alcohol in affecting tested parameters.

DEVELOPMENT OF A SPECIFIC RADIODMMUNOASSAY FOR DETERMINATION OF PEPTIDES DERIVED FROM HUMAN LEUKOCYTE ELASTASE DEGRADATION OF HUMAN FIBRIN (OGEN)

1987 ◽  
Author(s):  
R Wallin ◽  
T Saldeen
Keyword(s):  
Human Leukocyte ◽  
In Vitro Study ◽  
Molecular Size ◽  
Molar Ratio ◽  
Leukocyte Elastase ◽  
Severe Renal Failure ◽  
Human Leukocyte Elastase ◽  
Edta Plasma

This paper describes a RIA for determination of the vasoactive peptide BB 30-43 and related peptides derived from leukocyte elastase degradaticn of human fibrin(ogen). The peptide was synthesized and could easily be labelled with 125I.Rabbits were iirmunized with BB 30-43 conjugated to bovine albumin. The antibody was found to bind about 5C% of the tracer in absence of BB 30-43 in a ˜1/800 diluticn. The RIA can detect peptide concentrations between 50 - 25000 pmol/L. The crossreaction with fibrinogen is very low (<0.001%) and with plas-min derived fibrin(ogen) peptides Bβ 1-42 and BB 15-42 also low (<0.2%). Plasma samples can be analyzed without any pretreatment. In an in vitro study fibrin and fibrincgen was degraded with plasmin or leukocyte elastase. Plasmin degradaticn of fibrin and fibrincgen did not release peptides which cross-reacted with our antibody, whereas leukocyte elastase degradation released peptides from both fibrin and fibrinogen which crossreact whith the antibody.The imnunolqgical activity was not changed after degrading peptide Bβ 30-43 with a) trypsin, b) plasmin, c) batraxobin, d) thrombin, e) elastase, at +37°,1 h, in a molar ratio of 1:100. Even degradaticn by elastase (1:3.5) +37°, 1 h, did not destroy the iirmunological activity.The imriunolcgical stability of peptide B< 30-43 in EDTA-plasma (+37°) seems to be very good. In citrated and heparinized plasma the activity of this peptide seems to vanish quite fast. In spite of these results we have detected high levels of iirmunolcgical activitiy in citrated or heparinized patient plasma. The molecular distribution of the peptides detected in plasma by our RIA corresponded to a fragnent containing about 25 amino acids. This fragnent seemes to be rather stable in plasma. When this fragnent was degraded with elastase in vitro a peptide with a molecular size resembling BB 30-43 was obtained. Over 300 patient samples have been studied. About 20 per cent were positive and the highest levels were found in patients with ARDS, septicaemia, severe renal failure, pulmonary embolism, pneumonia and pulmonary congestion.

Evaluating Dentin Surface Treatments for Resin-Modified Glass Ionomer Restorative Materials

2013 ◽  
Vol 38 (4) ◽  
pp. 429-438 ◽  
Author(s):  
TA Imbery ◽  
A Namboodiri ◽  
A Duncan ◽  
R Amos ◽  
AM Best ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Surface Treatments ◽  
Band Matrices ◽  
Dentin Surface ◽  
Occlusal Surfaces ◽  
Significant Difference

SUMMARY This in vitro study evaluated the effect of six surface treatments on the shear bond strength of three resin-modified glass ionomers (RMGIs) to dentin. Occlusal surfaces of caries-free third molars were reduced to expose only dentin. Surface treatments were smear layer intact (negative control), Cavity Conditioner, EDTA, Ketac Primer, Self Conditioner, and etching with 35% phosphoric acid followed by the application of Optibond Solo Plus. Filtek Z250 composite resin bonded with Optibond Solo Plus served as a positive control. Conditioning agents were used according to the manufacturers' instructions. After surface treatments, Fuji II LC, Riva LC, Ketac Nano, and Filtek Z250 were placed in copper-band matrices 5 mm in diameter and 2 mm in height and were light-cured for 20 seconds. Specimens were stored in 100% humidity for 24 hours, after which they were placed in deionized water for 24 hours at 37°C. They were then tested under shear forces in an Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. A two-way analysis of variance and Tukey honestly significant difference statistical analyses (p&lt;0.05) indicated significant interaction between RMGIs and conditioning agents. Acid etching followed by Optibond Solo Plus provided highest bond strengths for all three RMGIs, which were not statistically different from the positive control.

Sign in / Sign up

Export Citation Format

Share Document