Comparative Renal Anatomy: Application of Morphometric Techniques to Determine Surface Area and Volume1

2015 ◽  
pp. 42-50 ◽  
Author(s):  
Eric R. Lacy
Keyword(s):  
Surface Area ◽  
Determine Surface Area

scholarly journals Pembuatan Katalis Pd-Ce/γ –Al2O3 dan Uji Aktivitas terhadap Oksidasi Metana

1999 ◽  
Vol 2 (3) ◽  
pp. 104-111
Author(s):  
Ahmad Suseno ◽  
Triyono Triyono ◽  
Bambang Setiaji
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Pore Volume ◽  
Pore Radius ◽  
Flow Reactor ◽  
Chloride Salt ◽  
Oxidation Of Methane ◽  
Sorption Method ◽  
Determine Surface Area ◽  
Products Of Reaction

Effects of Ce addition on Pt/γ - Al2O3 catalysts preparation and their catalytic activity on oxidation of methane have been investigated. In this study, the catalysts were prepared by impregnating chloride salt solution of palladium and sulphate salt of cerium on γ-AI2O3 support. Characterization of catalysts was conducted by gas sorption method to determine surface area, pore radius and pore volume. The test of catalytic activity on oxidation of methane was carried out in a flow reactor system at a temperature range from 350°C to 600°C. Products of reaction were analysed by non-dispersive IR spectroscopy. It was observed that the surface area, pore radius and pore volume decrease with the addition of cerium. The results of oxidation process showed that Pd-Ce/γ-Al2O3 catalyst can be used for oxidation of methane up to 90.62% conversion

Tomography of Carbon Black for Surface Area Measurement

2001 ◽  
Vol 7 (S2) ◽  
pp. 82-83
Author(s):  
E. M. Hunt ◽  
C.R. Herd
Keyword(s):  
Carbon Black ◽  
Surface Area ◽  
Electron Tomography ◽  
Particle Diameter ◽  
Automated System ◽  
Area Measurement ◽  
Morphological Properties ◽  
Two Dimensional ◽  
Area And Perimeter ◽  
Determine Surface Area

Currently, the morphology of carbon black is described by distributive morphological properties that are measured using two dimensional TEM projections of the carbon black aggregates. The area, perimeter and several Feret diameters of 2000 such aggregate projections are measured with an automated system and used to calculate a number of parameters including the mean primary particle diameter and the surface area of the carbon black in m2/g. Several assumptions must be made in order to carry out these calculations, the first being that the aggregates are either isotropic or randomly oriented. True random orientation is impossible due to the flat surface on which the carbon black is deposited. For relatively compact spherical, ellipsoidal and linear aggregates this assumption works fairly well. However, the more highly structured a carbon black aggregate is, the worse this assumption becomes. Studies of these types of aggregates have shown that the two dimensional projected area and perimeter can decrease up to 25% as the viewing angle is increased from 0° to 45°. The use of electron tomography to determine surface area will eliminate this problem. in addition, the use of tomographically reconstructed carbon black aggregates for the determination of surface area is a more direct measurement technique, although limitations to its accuracy do exist.

Preparation and characterisation of vanadium pentoxide supported rhodium catalyst

1988 ◽  
Vol 46 ◽  
pp. 946-947
Author(s):  
A. Legrouri
Keyword(s):  
Aqueous Solution ◽  
Thermal Decomposition ◽  
Physicochemical Properties ◽  
Surface Area ◽  
Vanadium Pentoxide ◽  
High Purity ◽  
Gas Adsorption ◽  
Rhodium Catalyst ◽  
Optical Methods ◽  
Reducible Oxides

The industrial importance of metal catalysts supported on reducible oxides has stimulated considerable interest during the last few years. This presentation reports on the study of the physicochemical properties of metallic rhodium supported on vanadium pentoxide (Rh/V2O5). Electron optical methods, in conjunction with other techniques, were used to characterise the catalyst before its use in the hydrogenolysis of butane; a reaction for which Rh metal is known to be among the most active catalysts.V2O5 powder was prepared by thermal decomposition of high purity ammonium metavanadate in air at 400 °C for 2 hours. Previous studies of the microstructure of this compound, by HREM, SEM and gas adsorption, showed it to be non— porous with a very low surface area of 6m2/g3. The metal loading of the catalyst used was lwt%Rh on V2Q5. It was prepared by wet impregnating the support with an aqueous solution of RhCI3.3H2O.

Cell morphology, volume, and surface area determinations from multilevel contouring within HVEM micrographs of serial sections and whole-cell mounts

1987 ◽  
Vol 45 ◽  
pp. 588-589
Author(s):  
M. Marko ◽  
A. Leith ◽  
D. Parsons
Keyword(s):  
Surface Area ◽  
Electron Micrographs ◽  
Cell Morphology ◽  
Individual Variation ◽  
Serial Section ◽  
Stereo Pair ◽  
Complex Structures ◽  
Serial Sections ◽  
Surface Areas ◽  
Computer Based

The use of serial sections and computer-based 3-D reconstruction techniques affords an opportunity not only to visualize the shape and distribution of the structures being studied, but also to determine their volumes and surface areas. Up until now, this has been done using serial ultrathin sections.The serial-section approach differs from the stereo logical methods of Weibel in that it is based on the Information from a set of single, complete cells (or organelles) rather than on a random 2-dimensional sampling of a population of cells. Because of this, it can more easily provide absolute values of volume and surface area, especially for highly-complex structures. It also allows study of individual variation among the cells, and study of structures which occur only infrequently.We have developed a system for 3-D reconstruction of objects from stereo-pair electron micrographs of thick specimens.

Risk Factors for Bleeding during Treatment of Acute Venous Thromboembolism

1996 ◽  
Vol 76 (05) ◽  
pp. 682-688 ◽  
Author(s):  
Jos P J Wester ◽  
Harold W de Valk ◽  
Karel H Nieuwenhuis ◽  
Catherine B Brouwer ◽  
Yolanda van der Graaf ◽  
...  
Keyword(s):  
Risk Factors ◽  
Venous Thromboembolism ◽  
Surface Area ◽  
Body Surface Area ◽  
Body Surface ◽  
Small Body ◽  
Bleeding Risk ◽  
Risk Scores ◽  
Risk Of Bleeding ◽  
Acute Venous Thromboembolism

Summary Objective: Identification of risk factors for bleeding and prospective evaluation of two bleeding risk scores in the treatment of acute venous thromboembolism. Design: Secondary analysis of a prospective, randomized, assessor-blind, multicenter clinical trial. Setting: One university and 2 regional teaching hospitals. Patients: 188 patients treated with heparin or danaparoid for acute venous thromboembolism. Measurements: The presenting clinical features, the doses of the drugs, and the anticoagulant responses were analyzed using univariate and multivariate logistic regression analysis in order to evaluate prognostic factors for bleeding. In addition, the recently developed Utrecht bleeding risk score and Landefeld bleeding risk index were evaluated prospectively. Results: Major bleeding occurred in 4 patients (2.1%) and minor bleeding in 101 patients (53.7%). For all (major and minor combined) bleeding, body surface area ≤2 m2 (odds ratio 2.3, 95% Cl 1.2-4.4; p = 0.01), and malignancy (odds ratio 2.4, 95% Cl 1.1-4.9; p = 0.02) were confirmed to be independent risk factors. An increased treatment-related risk of bleeding was observed in patients treated with high doses of heparin, independent of the concomitant activated partial thromboplastin time ratios. Both bleeding risk scores had low diagnostic value for bleeding in this sample of mainly minor bleeders. Conclusions: A small body surface area and malignancy were associated with a higher frequency of bleeding. The bleeding risk scores merely offer the clinician a general estimation of the risk of bleeding. In patients with a small body surface area or in patients with malignancy, it may be of interest to study whether limited dose reduction of the anticoagulant drug may cause less bleeding without affecting efficacy.

Sign in / Sign up

Export Citation Format

Share Document