scholarly journals Simultaneous Determination of 25 Ginsenosides by UPLC-HRMS via Quantitative Analysis of Multicomponents by Single Marker

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Xiujuan Jia ◽  
Chenxing Hu ◽  
Xuepeng Zhu ◽  
Ye Yuan ◽  
Yifa Zhou
Keyword(s):  
Quantitative Analysis ◽  
Qualitative And Quantitative Analysis ◽  
High Throughput Analysis ◽  
Multiple Components ◽  
External Standard Method ◽  
External Standard ◽  
Single Marker ◽  
Ginsenoside Content ◽  
Elution Gradient

A method using UPLC-HRMS has been developed for a rapid, simultaneous qualitative and quantitative analysis of twenty-five ginsenosides. Chromatographic separation was achieved on a C18 analytical column with an elution gradient comprising 0.1% aqueous formate/acetonitrile as the mobile phase. HRMS detection acquired full mass data for quantification and fullms-ddms2 (i.e., data-dependent scan mode) yielded product ion spectra for identification. Furthermore, quantitative analysis of multiginsenosides by single marker (QAMS) was developed and validated using a relative correction factor. Under optimal conditions, we could simultaneously separate eight groups of isomers of the 25 ginsenosides. Good linearity was observed over the validated concentration range for each analyte (r2 > 0.9924), showing excellent sensitivity (LODs, 0.003–0.349 ng/mL) and lower limit quantification (LOQs, 0.015–1.163 ng/mL). The LC-MS external standard method (ESM) and QAMS were compared and successfully applied to analyze the ginsenoside content from Panax ginseng roots. Overall, our UPLC-HRMS/QAMS approach provides high precision, stability, and reproducibility and can be used for high-throughput analysis of complex ginsenosides and quantitative analysis of multiple components and quality control of traditional Chinese medicines (TCM).

scholarly journals Quality Evaluation of Polar and Active Components in Crude and ProcessedFructus Corniby Quantitative Analysis of Multicomponents with Single Marker

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Yuhong Jiang ◽  
Hui Chen ◽  
Liling Wang ◽  
Jing Zou ◽  
Xiao Zheng ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Active Components ◽  
Internal Reference ◽  
External Standard Method ◽  
Significant Difference ◽  
External Standard ◽  
Single Marker ◽  
Quantitative Results ◽  
Processed Products

Objective. To develop a quantitative analysis of multicomponents by single-marker (QAMS) method for the simultaneous determination of polar active components inFructus Corni.Methods. Loganin was selected as the internal reference, and the relative correction factors (RCFs) of gallic acid, 5-hydroxymethyl-2-furfural, morroniside, sweroside, cornin, 7α-O-methylmorroniside, 7β-O-methylmorroniside, 7α-O-ethylmorroniside, 7β-O-ethylmorroniside, and cornuside were established. The contents of multicomponents were then calculated based on their RCFs, respectively. Contents of the 11 components were also calculated by external standard method and compared with those of the QAMS method.Results.The contents of the 11 components in 21 crude and 10 processedFructus Corniproducts were measured. No significant difference was found in the quantitative results of the QAMS and external standard methods.Conclusion. QAMS could serve as an accurate and convenient method in determining the polar and active components inFructus Corniand its processed products.

scholarly journals Simultaneous determination of five diuretic drugs using quantitative analysis of multiple components by a single marker

BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Fuchao Chen ◽  
Baoxia Fang ◽  
Peng Li ◽  
Sicen Wang
Keyword(s):  
Quantitative Analysis ◽  
Simultaneous Determination ◽  
Dihydrogen Phosphate ◽  
Column Temperature ◽  
Multiple Components ◽  
External Standard Method ◽  
Significant Difference ◽  
Diuretic Drugs ◽  
Single Marker

Abstract Background Loop diuretics are commonly used in clinical practice to manage high fluid loads and to control fluid balance. In this paper, a novel quantitative analysis method for multiple components with a single marker (QAMS) was developed for the simultaneous determination of 5 diuretic drugs furosemide, torasemide, azosemide, etacrynic acid, and bumetanide, by HPLC. Qualitative analysis was performed using relative retention time and ultraviolet (UV) spectral similarity as the double indicator. The QAMS method was conducted with etacrynic acid as an internal reference substance. The quantities of the other four diuretics were calculated by using the relative correction factors for etacrynic acid. The quantities of the 5 diuretic drugs were also determined by the external standard method (ESM). Chromatographic separation was achieved on a Shimadzu HC-C18 column (150 mm × 4.6 mm, 5 µm) using 50 mM potassium dihydrogen phosphate (pH adjusted to 4.0 with phosphoric acid) with acetonitrile (64:36, v/v) as the mobile phase at a flow rate of 1.0 mL/min and a column temperature of 30 ℃. Results Under these conditions, the 5 diuretic drugs were well separated, showing linear relationships within certain ranges. The quantitative results showed that there was no significant difference between the QAMS and ESM methods. Conclusions Overall, the HPLC-QAMS analytical scheme established in this study is a simple, efficient, economical, and accurate method for the quantitative evaluation of 5 diuretic drugs.

scholarly journals Simultaneous determination of 5 diuretic drugs using an HPLC method by quantitative analysis of multiple components by a single marker

2021 ◽  
Author(s):  
Fuchao Chen ◽  
Baoxia Fang ◽  
Peng Li ◽  
Sicen Wang
Keyword(s):  
Quantitative Analysis ◽  
Simultaneous Determination ◽  
Dihydrogen Phosphate ◽  
Column Temperature ◽  
Multiple Components ◽  
External Standard Method ◽  
Significant Difference ◽  
Diuretic Drugs ◽  
Single Marker

Abstract Background: Loop diuretics are commonly used in clinical practice to manage high fluid loads and to control fluid balance. In this paper, a novel quantitative analysis method for multiple components with a single marker (QAMS) was developed for the simultaneous determination of 5 diuretic drugs furosemide, torasemide, azosemide, etacrynic acid, and bumetanide, by HPLC. Qualitative analysis was performed using relative retention time and ultraviolet (UV) spectral similarity as the double indicator. The QAMS method was conducted with etacrynic acid as an internal reference substance. The quantities of the other four diuretics were calculated by using the relative correction factors for etacrynic acid. The quantities of the 5 diuretic drugs were also determined by the external standard method (ESM). Chromatographic separation was achieved on a Shimadzu HC-C18 column (150 mm× 4.6 mm, 5µm) using 50 mM potassium dihydrogen phosphate (pH adjusted to 4.0 with phosphoric acid) with acetonitrile (64:36, v/v) as the mobile phase at a flow rate of 1.0 mL/min and a column temperature of 30 ℃. Results: Under these conditions, the 5 diuretic drugs were well separated, showing linear relationships within certain ranges. The quantitative results showed that there was no significant difference between the QAMS and ESM methods. Conclusions: Overall, the HPLC-QAMS analytical scheme established in this study is a simple, efficient, economical, and accurate method for the quantitative evaluation of 5 diuretic drugs.

scholarly journals Exploitation of HPLC Analytical Method for Simultaneous Determination of Six Principal Unsaturated Fatty Acids in Oviductus Ranae Based on Quantitative Analysis of Multi-Components by Single-Marker (QAMS)

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 479
Author(s):  
Shihan Wang ◽  
Yuanshuai Gan ◽  
Hong Kan ◽  
Xinxin Mao ◽  
Yongsheng Wang
Keyword(s):  
Fatty Acids ◽  
Quantitative Analysis ◽  
Unsaturated Fatty Acids ◽  
Internal Standard ◽  
Active Components ◽  
Reliable Determination ◽  
External Standard Method ◽  
Single Marker ◽  
Oviductus Ranae

As one of the featured products in northeast China, Oviductus Ranae has been widely used as a nutritious food, which contains a variety of bioactive unsaturated fatty acids (UFAs). It is necessary to establish a scientific and reliable determination method of UFA contents in Oviductus Ranae. In this work, six principal UFAs in Oviductus Ranae, namely eicosapentaenoic acid (EPA), linolenic acid (ALA), docosahexaenoic acid (DHA), arachidonic acid (ARA), linoleic acid (LA) and oleic acid (OA), were identified using UPLC-MS/MS. The UFAs identified in Oviductus Ranae were further separated based on the optimized RP-HPLC conditions. Quantitative analysis of multi-components by single-marker (QAMS) method was implemented in content determination of EPA, ALA, DHA, ARA and OA, where LA was used as the internal standard. The experiments based on Taguchi design verified the robustness of the QAMS method on different HPLC instruments and chromatographic columns. The QAMS and external standard method (ESM) were used to calculate the UFA content of 15 batches of Oviductus Ranae samples from different regions. The relative error (r < 0.73%) and cosine coefficient showed that the two methods obtained similar contents, and the method validations met the requirements. The results showed that QAMS can comprehensively and effectively control the quality of UFAs in Oviductus Ranae which provides new ideas and solutions for studying the active components in Oviductus Ranae.

New Determination Method of Two Bioactive Saponins in Lysimachia capillipes Hemsl. by Quantitative Analysis of Multi-Components by Single-Marker

2021 ◽  
Author(s):  
Xiaoyong Zhang ◽  
Xuezhao Chen ◽  
Juan Jin ◽  
Minghua Gong ◽  
Qiang He ◽  
...  
Keyword(s):  
Quality Control ◽  
Quantitative Analysis ◽  
High Performance ◽  
Reference Standards ◽  
Bioactive Components ◽  
Evaporative Light Scattering Detector ◽  
Evaporative Light Scattering ◽  
External Standard ◽  
Single Marker

Abstract Capilliposide B (CPS-B) and Capilliposide C (CPS-C), as the key components in Lysimachia capillipes Hemsl., increasingly aroused the interest and research concern of many researchers due to the good bioactivities. Nowadays, the reference standards of CPS-B and CPS-C yield were very limited. Due to the deficit of reference standards, the determination could be difficult to carry out, and the quality control and evaluation would be restrained afterwards. To solve this urgent problem, a quantitative analysis of multi-components by single-marker (QAMS) method was proposed and established based on high-performance liquid-chromatography tandem evaporative light-scattering detector. In this QAMS method, the content of the two bioactive components could be calculated by buddlejasaponin IV, which is applied as an external standard and readily obtained. And the methodological experiments were evaluated and indicated accuracy, stability and feasibility of this QAMS method. Therefore, in this study, this built method would properly meet the requirement of determination of CPS-B, CPS-C and quality control of the L. capillipes Hemsl. plant.

scholarly journals Simultaneous Determination of Four Ingredients in Plantago Depressa by Single Marker

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yang Xu ◽  
Yuejie Wang ◽  
Shengnan Bi ◽  
Yanxue Jia ◽  
Huiwei Bao
Keyword(s):  
Simultaneous Determination ◽  
Standard Method ◽  
Protocatechuic Acid ◽  
Correction Factors ◽  
Active Components ◽  
Relative Correction ◽  
External Standard Method ◽  
External Standard ◽  
Single Marker

Objective. To establish a quantitative analysis of multicomponents by single marker (QAMS) method for the simultaneous determination of 4 active components such as protocatechuic acid, catechin, quercetin, and luteolin in Plantago depressa. Method. 4 active components in Plantago depressa were studied. Quercetin was used as an internal reference to establish the relative correction factors among protocatechuic acid, catechin, and luteolin and calculate the contents of each component; the results were compared with those measured by the external standard method. Results. 4 components showed a good linear relationship in their respective concentration ranges (r > 0.9995). The relative correction factors (fs/k) of protocatechuic acid, catechin, and luteolin were 1.1992, 0.8613, and 1.6069, respectively. The method had good durability. The contents of protocatechuic acid, catechin, and luteolin calculated by QAMS were not significantly different from those measured by the external standard method. Conclusion. QAMS can be used to determine the content of 4 components in Plantago depressa at the same time, and the method is simple, accurate, and can be used for quality control.

scholarly journals Simultaneous Determination of Six Active Components in Danggui Kushen Pills via Quantitative Analysis of Multicomponents by Single Marker

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Huiwei Bao ◽  
Jihong Chi ◽  
Huailei Yang ◽  
Fangxin Liu ◽  
Kuo Fang ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Gallic Acid ◽  
Quality Evaluation ◽  
Evaluation Method ◽  
Internal Standard ◽  
Active Components ◽  
External Standard Method ◽  
Significant Difference ◽  
External Standard ◽  
Single Marker

In this paper, a valid evaluation method for the quality control of Danggui Kushen pills (DKP) has been established based on quantitative analysis of multicomponents by single marker (QAMS). Gallic acid, matrine, oxymatrine, catechin, ferulic acid, and rutin were selected as the indexes for quality evaluation of DKP. The analysis was achieved on an Agilent ZORBAX SB-C18 column (250  mm × 4.6  mm, 5 μm) via gradient elution. Gallic acid was used as internal standard to determine the relative correction factors (RCF) between gallic acid and other five constituents in DKP. The contents of those components were calculated at the same time. The accuracy of QAMS method was verified by comparing the contents of six components calculated by external standard (ES) method with those of the QAMS method. It turned out that there was no significant difference between the quantitative results of QAMS method and external standard method. The proposed QAMS method was proved to be accurate and feasible according to methodological experiments, which provided an accurate, efficient, and economical approach for quality evaluation of DKP.

scholarly journals Simultaneous Determination of Six Chromones in Saposhnikoviae Radix via Quantitative Analysis of Multicomponents by Single Marker

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jinhua Zhang ◽  
Luxiao Chen ◽  
Junna Qiu ◽  
Yu Zhang ◽  
Lu Wang ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Simultaneous Determination ◽  
Principal Component ◽  
Total Content ◽  
Quality Standard ◽  
Bioactive Constituents ◽  
External Standard Method ◽  
Single Marker ◽  
Saposhnikoviae Radix

A method, quantitative analysis of multicomponents by single marker (QAMS), was established and fully verified based on high-performance liquid chromatography (HPLC) for simultaneous determination of six chromone indicators of Saposhnikoviae Radix (SR). In the present study, cimifugin (C), 5-O-methylvisamminol (V), hamaudol (H), and their corresponding glycosides, prim-O-glucosylcimifugin (GC), 4′-O-β-D-glucosyl-5-O-methylvisamminol (GV), and sec-O-glucosylhamaudol (GH), were selected as bioactive constituents and indicators for the quality evaluation of SR. GV was chosen as the unique reference standard, and relative correction factors (RCF) between GV and the other five chromones were calculated. The feasibility of QAMS for the analysis of chromones was investigated by comparing with the traditional external standard method (ESM). Furthermore, the method was proven to have accuracy (96.98%–102.50%), repeatability (RSD <3%), stability (RSD <3%), precision (RSD <3%), and desirable linearity (R2 ≧0.9999). Subsequently, 55 batches of commercial SR from different regions were determined by QAMS, and their contents were analyzed by principal component analysis (PCA), correlation analysis, and hierarchical cluster analysis (HCA), respectively. Based on the results, a more refined quality standard of commercial SR was proposed: SR was qualified when the total contents of six chromones were greater than 3 mg·g−1. Furthermore, SR could initially be regarded as a superior medicine when it satisfied both conditions at the same time: the total content of GC, C, GV, V, GH, and H was greater than 8 mg·g−1, and the proportion of the total content of C, V, and H was greater than 10%. This study demonstrated that the quality of SR could be successfully evaluated by the developed QAMS method; meanwhile, valuable information was provided for improving the quality standard of SR.

Determination of five sesquiterpenoids in Xingnaojing injection by quantitative analysis of multiple components with a single marker

2015 ◽  
Vol 38 (19) ◽  
pp. 3313-3323 ◽  
Author(s):  
Weidong Pan ◽  
Lixin Yang ◽  
Weihong Feng ◽  
Limei Lin ◽  
Chun Li ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Multiple Components ◽  
Single Marker ◽  
Xingnaojing Injection

scholarly journals Analysis of the HPLC Fingerprint and QAMS for Sanhuang Gypsum Soup

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Yi Peng ◽  
Minghui Dong ◽  
Jing Zou ◽  
Zhihui Liu
Keyword(s):  
Quantitative Analysis ◽  
Standard Method ◽  
Evaluation Method ◽  
Similarity Analysis ◽  
Hplc Fingerprint ◽  
External Standard Method ◽  
Significant Difference ◽  
External Standard ◽  
Single Marker

A valid and encyclopaedic evaluation method for assessing the quality of Sanhuang Gypsum Soup (SGS) has been set up based on analysis of high-performance liquid chromatography (HPLC) fingerprint combined with the quantitative analysis of multicomponents by single marker (QAMS) method, hierarchical cluster analysis (HCA), and similarity analysis. 20 peaks of the common model were obtained and used for the similarity analysis and HCA analysis. Berberine was selected as an internal reference, and the relative correction factors of mangiferin, geniposide, liquiritin, epiberberine, coptisine, baicalin, palmatine, harpagosid, wogonoside, cinnamic acid, cinnamic aldehyde, baicalein, glycyrrhizic acid, and wogonin were established. The accuracy of quantitative analysis of multicomponents by the single-marker method was verified by comparing the contents of the fourteen components calculated by the external standard method with those of the quantitative analysis of multicomponents by the single-marker method. No significant difference was found in the quantitative results of the established quantitative analysis of multicomponents by a single-marker method and an external standard method. In summary, these methods were applied to evaluate the quality of SGS successfully. As a result, these evaluation methods have great potential to be widely used in the quality control of traditional Chinese medicines (TCM).

Sign in / Sign up

Export Citation Format

Share Document