scholarly journals The Effect of 3D Printing Metal Materials on Osteoporosis Treatment

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Bing Wang ◽  
Chuwen Feng ◽  
Jianyu Pan ◽  
Shuoyan Zhou ◽  
Zhongren Sun ◽  
...  
Keyword(s):  
3D Printing ◽  
Relevant Literature ◽  
Osteoporosis Treatment ◽  
Rehabilitation Medicine ◽  
Physical And Rehabilitation Medicine ◽  
Long Time ◽  
3D Printed ◽  
Metal Materials ◽  
Printed Materials

3D printing has been in use for a long time and has continued to contribute to breakthroughs in the fields of clinical, physical, and rehabilitation medicine. In order to evaluate the role of 3D printing technology in treating spinal disorders, this paper presents a systematic review of the relevant literature. 3D printing is described in terms of its adjunctive function in various stages of spinal surgery and assistance in osteoporosis treatment. A review of metal 3D printed materials and applications of the technology is also provided.

Utility and cost–effectiveness of 3D-printed materials for clinical use

2019 ◽  
Vol 3 (4) ◽  
pp. 209-218 ◽  
Author(s):  
Julian Vitali ◽  
Matthew Cheng ◽  
Michael Wagels
Keyword(s):  
Cost Effectiveness ◽  
3D Printing ◽  
Relevant Literature ◽  
Clinical Use ◽  
Surgical Guides ◽  
Rigorous Testing ◽  
Clinical Benefits ◽  
3D Printed ◽  
Surgical Adjunct ◽  
Printed Materials

This review summarizes the utility of 3D-printing as a surgical adjunct, reviewing the cost–effectiveness. The relevant literature was analyzed outlining the utility and/or cost–effectiveness of 3D-printing for clinical use. Compared with existing methods, the evidence suggests an advantage of using 3D-printing as a technology in the treatment of complex clinical cases. However, in high frequency cases, the additional preoperative expenses are not justified. Considerable evidence of its clinical benefits exists for the application of 3D-printed anatomical models and teaching tools. However, the evidence supporting 3D-printing’s use as surgical guides or implantable devices is less clear. Furthermore, caution must exist when using these devices in the clinical setting due to a paucity of rigorous testing, global regulation and long-term data.

APPLICATION OF 3D PRINTING TECHNOLOGY FOR RAPID TOOLING IN SHEET METAL FORMING

2020 ◽  
Vol 3 ◽  
pp. 20-30
Author(s):  
M.A. SEREZHKIN ◽  
D.O. KLIMYUK ◽  
A.I. PLOKHIKH
Keyword(s):  
3D Printing ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Rapid Tooling ◽  
Printing Technology ◽  
3D Printing Technology ◽  
3D Printed ◽  
Printed Materials ◽  
Printing Parameters

The article presents the study of the application of 3D printing technology for rapid tooling in sheet metal forming for custom or small–lot manufacturing. The main issue of the usage of 3D printing technology for die tooling was discovered. It is proposed to use the method of mathematical modelling to investigate how the printing parameters affect the compressive strength of FDM 3D–printed parts. Using expert research methods, the printing parameters most strongly affecting the strength of products were identified for further experiments. A method for testing the strength of 3D–printed materials has been developed and tested.

A review on the role of 3D printing in the fight against COVID-19: safety and challenges

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sapam Ningthemba Singh ◽  
Vavilada Satya Swamy Venkatesh ◽  
Ashish Bhalchandra Deoghare
Keyword(s):  
Supply Chain ◽  
3D Printing ◽  
Three Dimensional ◽  
Content Type ◽  
Medical Supplies ◽  
Future Challenges ◽  
Safety And Reliability ◽  
3D Printed ◽  
Comprehensive Study

Purpose During the COVID-19 pandemic, the three-dimensional (3D) printing community is actively participating to address the supply chain gap of essential medical supplies such as face masks, face shields, door adapters, test swabs and ventilator valves. This paper aims to present a comprehensive study on the role of 3D printing during the coronavirus (COVID-19) pandemic, its safety and its challenges. Design/methodology/approach This review paper focuses on the applications of 3D printing in the fight against COVID-19 along with the safety and challenges associated with 3D printing to fight COVID-19. The literature presented in this paper is collected from the journal indexing engines including Scopus, Google Scholar, ResearchGate, PubMed, Web of Science, etc. The main keywords used for searches were 3D printing COVID-19, Safety of 3D printed parts, Sustainability of 3D printing, etc. Further possible iterations of the keywords were used to collect the literature. Findings The applications of 3D printing in the fight against COVID-19 are 3D printed face masks, shields, ventilator valves, test swabs, drug deliveries and hands-free door adapters. As most of these measures are implemented hastily, the safety and reliability of these parts often lacked approval. The safety concerns include the safety of the printed parts, operators and secondary personnel such as the workers in material preparation and transportation. The future challenges include sustainability of the process, long term supply chain, intellectual property and royalty-free models, etc. Originality/value This paper presents a comprehensive study on the applications of 3D printing in the fight against COVID-19 with emphasis on the safety and challenges in it.

scholarly journals Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4544
Author(s):  
Osman Konuray ◽  
Arnau Sola ◽  
Jordi Bonada ◽  
Agnieszka Tercjak ◽  
Albert Fabregat-Sanjuan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polymer Networks ◽  
Complex Form ◽  
Interpenetrating Polymer Networks ◽  
Dual Processing ◽  
Digital Light Processing ◽  
Superior Mechanical Properties ◽  
3D Printed ◽  
Acrylate Resin ◽  
Printed Materials

Versatile acrylate–epoxy hybrid formulations are becoming widespread in photo/thermal dual-processing scenarios, especially in 3D printing applications. Usually, parts are printed in a stereolithography or digital light processing (DLP) 3D printer, after which a thermal treatment would bestow the final material with superior mechanical properties. We report the successful formulation of such a hybrid system, consisting of a commercial 3D printing acrylate resin modified by an epoxy–anhydride mixture. In the final polymeric network, we observed segregation of an epoxy-rich phase as nano-domains, similar to what was observed in a previous work. However, in the current work, we show the effectiveness of a coupling agent added to the formulation to mitigate this segregation for when such phase separation is undesired. The hybrid materials showed significant improvement of Young’s modulus over the neat acrylate. Once the flexible, partially-cured material was printed with a minimal number of layers, it could be molded into a complex form and thermally cured. Temporary shapes were readily programmable on this final material, with easy shape recovery under mild temperatures. Inspired by repairable 3D printed materials described recently, we manufactured a large object by printing its two halves, and then joined them covalently at the thermal cure stage with an apparently seamless union.

Environment Influence on the Properties of Functional Parts Made of HIPS Material

2021 ◽  
Vol 105 (1) ◽  
pp. 431-440
Author(s):  
Pavel Šafl ◽  
Jana Zimáková ◽  
Tomáš Binar
Keyword(s):  
Electron Microscope ◽  
3D Printing ◽  
Tensile Test ◽  
Uv Light ◽  
Starting Material ◽  
Climatic Chamber ◽  
3D Printed ◽  
Formation Of Cracks ◽  
Printed Materials ◽  
Degree Of Degradation

The aim of this work is to study the climatic influences on 3D printed materials. This study focuses on the HIPS material, which was chosen as the starting material for further studies. The material in the field of 3D printing is known for its rapid photooxidation, which results in the formation of cracks in the final product. A climatic chamber was used for degradation, in which UV light, heat and increased humidity were applied to the material. The degree of degradation was then checked by tensile test and electron microscope.

scholarly journals The role of physical and rehabilitation medicine specialist in lymphoedema

2013 ◽  
Vol 56 (5) ◽  
pp. 396-410 ◽  
Author(s):  
V. Fialka-Moser ◽  
M. Korpan ◽  
E. Varela ◽  
A. Ward ◽  
C. Gutenbrunner ◽  
...  
Keyword(s):  
Rehabilitation Medicine ◽  
Physical And Rehabilitation Medicine

Thermal Conductivity Testing Apparatus for 3D Printed Materials

2017 ◽  
Author(s):  
Tiffaney Flaata ◽  
Gregory J. Michna ◽  
Todd Letcher
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Polymer Composite ◽  
Heat Exchangers ◽  
Fused Deposition ◽  
3D Printed ◽  
Printed Materials ◽  
Metal Polymer

Additive manufacturing, the layer-by-layer creation of parts, was initially used for rapid prototyping of new designs. Recently, due to the decrease in the cost and increase in the resolution and strength of additively manufactured parts, additive manufacturing is increasingly being used for production of parts for end-use applications. Fused Deposition Modeling (FDM), a type of 3d printing, is a process of additive manufacturing in which a molten thermoplastic material is extruded to create the desired geometry. Many potential heat transfer applications of 3d printed parts, including the development of additively manufactured heat exchangers, exist. In addition, the availability of metal/polymer composite filaments, first used for applications such as tooling for injection molding applications and to improve wear resistance, could lead to increased performance 3d printed heat exchangers because of the higher thermal conductivity of the material. However, the exploitation of 3d printing for heat transfer applications is hindered by a lack of reliable thermal conductivity data for as-printed materials, which typically include significant void fractions. In this experimental study, an apparatus to measure the effective thermal conductivity of 3d printed composite materials was designed and fabricated. Its ability to accurately measure the thermal conductivity of polymers was validated using a sample of acrylic, whose conductivity is well understood. Finally, the thermal conductivities of various 3d printed polymer, metal/polymer composite, and carbon/polymer composite filaments were measured and are reported in this paper. The materials used are acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), stainless steel/PLA, Brass/PLA, and Bronze/PLA.

scholarly journals The Role of 3D Printing in Medical Applications: A State of the Art

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Anna Aimar ◽  
Augusto Palermo ◽  
Bernardo Innocenti
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Patient Specific ◽  
Digital Information ◽  
Medical Implants ◽  
Medical Field ◽  
3D Printed ◽  
Pipe Dream ◽  
Manufacturing Technologies

Three-dimensional (3D) printing refers to a number of manufacturing technologies that generate a physical model from digital information. Medical 3D printing was once an ambitious pipe dream. However, time and investment made it real. Nowadays, the 3D printing technology represents a big opportunity to help pharmaceutical and medical companies to create more specific drugs, enabling a rapid production of medical implants, and changing the way that doctors and surgeons plan procedures. Patient-specific 3D-printed anatomical models are becoming increasingly useful tools in today’s practice of precision medicine and for personalized treatments. In the future, 3D-printed implantable organs will probably be available, reducing the waiting lists and increasing the number of lives saved. Additive manufacturing for healthcare is still very much a work in progress, but it is already applied in many different ways in medical field that, already reeling under immense pressure with regards to optimal performance and reduced costs, will stand to gain unprecedented benefits from this good-as-gold technology. The goal of this analysis is to demonstrate by a deep research of the 3D-printing applications in medical field the usefulness and drawbacks and how powerful technology it is.

scholarly journals Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1618 ◽  
Author(s):  
Kozior ◽  
Trabelsi ◽  
Mamun ◽  
Sabantina ◽  
Ehrmann
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Water Pressure ◽  
Volume Ratio ◽  
Fused Deposition ◽  
Rigid Objects ◽  
Deposition Modeling ◽  
3D Printed ◽  
Printed Materials ◽  
Nanofiber Mats

Electrospinning is a well-known technology used to create nanofiber mats from diverse polymers and other materials. Due to their large surface-to-volume ratio, such nanofiber mats are often applied as air or water filters. Especially the latter, however, have to be mechanically highly stable, which is challenging for common nanofiber mats. One of the approaches to overcome this problem is gluing them on top of more rigid objects, integrating them in composites, or reinforcing them using other technologies to avoid damage due to the water pressure. Here, we suggest another solution. While direct 3D printing with the fused deposition modeling (FDM) technique on macroscopic textile fabrics has been under examination by several research groups for years, here we report on direct FDM printing on nanofiber mats for the first time. We show that by choosing the proper height of the printing nozzle above the nanofiber mat, printing is possible for raw polyacrylonitrile (PAN) nanofiber mats, as well as for stabilized and even more brittle carbonized material. Under these conditions, the adhesion between both parts of the composite is high enough to prevent the nanofiber mat from being peeled off the 3D printed polymer. Abrasion tests emphasize the significantly increased mechanical properties, while contact angle examinations reveal a hydrophilicity between the original values of the electrospun and the 3D printed materials.

Sign in / Sign up

Export Citation Format

Share Document