scholarly journals Electromechanical Performance Analysis of the Hybrid Piezoelectric-Electromagnetic Energy Harvester under Rotary Magnetic Plucking Excitation

2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Hongyan Wang ◽  
Jiarui Hu ◽  
Gang Sun ◽  
Liying Zou
Keyword(s):  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Average Power ◽  
Load Resistance ◽  
Electromagnetic Energy ◽  
Lumped Parameter Model ◽  
Model Parameters ◽  
Piezoelectric Energy ◽  
Power Inputs ◽  
Power Outputs

This paper presents an analysis of the hybrid piezoelectric-electromagnetic energy harvester (P-EMEH) driven by contactless rotary magnetic plucking. A lumped-parameter model of the hybrid P-EMEH is developed, and the model parameters are determined from the finite element analysis (FEA) method. A parametric study is conducted to investigate the effects of driving force parameters, load resistance, and electromechanical coupling strengths (EMCSs) on the maximal displacements and velocities, average power inputs and outputs, and energy efficiencies of the system for indicating the performance of the hybrid P-EMEH. The results show that the hybrid P-EMEH can obtain the improved power inputs by reducing the gyration radii of the rotary magnet and shortening the gaps between the two magnets. The structural vibrations can be strongly suppressed owing to the optimal piezoelectric power outputs, which can lead to the occurrence of valleys’ power of the electromagnetic element. At weak coupling, the hybrid P-EMEH can achieve higher power outputs than the single piezoelectric energy harvester (PEH) and the single electromagnetic energy harvester (EMEH). At strong coupling, the use of the PEH is more advantageous for energy harvesting due to wider power bandwidths at high dimensionless frequencies when compared with the hybrid P-EMEH. This work provides a fundamental understanding on the effect of load resistance and EMCSs on the dynamic and electrical characteristics of the magnetically plucked hybrid P-EMEH.

An asymmetric magnetic-coupled bending-torsion piezoelectric energy harvester: modeling and experimental investigation

2021 ◽  
Author(s):  
Huirong Zhang ◽  
Wentao Sui ◽  
Chongqiu Yang ◽  
Leian Zhang ◽  
Rujun Song ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Average Power ◽  
Harmonic Excitation ◽  
Lumped Parameter Model ◽  
Distributed Parameter ◽  
Piezoelectric Energy ◽  
Distributed Parameter Model ◽  
Piezoelectric Beam ◽  
Lumped Parameter ◽  
Torsion Energy

Abstract This paper presents a detailed investigation on an asymmetric magnetic-coupled bending-torsion piezoelectric energy harvester based on harmonic excitation. There is an eccentricity between the shape center of moving magnets and the axis of the piezoelectric beam, which results in the bending and torsion simultaneously in working condition. The distributed mathematical model is derived from the energy method to describe the dynamic characteristics of the harvester, and the correctness of the model is verified by experiments. To further demonstrate the improvement performance of the proposed energy harvester, the bending-torsion energy harvester (i.e. magnetic-coupled was not configured) is experimented and compared. The theoretical and experimental results indicate that the average power increases about 300% but the resonance frequency decreases approximately 2 Hz comparing to the harvester without magnetic-coupled. According to the characteristic of distributed parameter model, the magnetic force and the size of the piezoelectric beam are investigated respectively. And the lumped-parameter model is introduced to analyze the steady-state characteristic. Accordingly, this paper provides a feasible method to improve performance for piezoelectric energy harvester.

Comparison of flexoelectric and piezoelectric ring energy harvester

2018 ◽  
Vol 233 (11) ◽  
pp. 3795-3803
Author(s):  
XF Zhang ◽  
KM Hu ◽  
H Li
Keyword(s):  
Power Output ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Piezoelectric Effect ◽  
Coupling Effect ◽  
Load Resistance ◽  
Design Guidelines ◽  
Coupling Mechanism ◽  
Piezoelectric Patch ◽  
Piezoelectric Energy

Flexoelectric/piezoelectric effect is an electromechanical coupling effect occurring in dielectrics. In this study, a flexoelectric/piezoelectric ring energy harvester is proposed based on the direct flexoelectric/piezoelectric effect. The flexoelectric/piezoelectric ring energy harvester is made of an elastic ring and a flexoelectric/piezoelectric patch laminated on its surface. The electromechanical coupling mechanism of the flexoelectric/piezoelectric ring energy harvester is explored. Then the voltage and power output across the load resistance are derived in the closed-circuit condition for the energy harvester. The distinctive characteristics between the flexoelectric and the piezoelectric energy harvesters are discussed and compared in detail. The output power/voltage is related to various parameters, such as flexoelectric/piezoelectric patch size, load resistance, and flexoelectric/piezoelectric patch thickness, which are discussed to improve the power output across the load resistance. The flexoelectric ring energy harvester is more effective than the piezoelectric ring energy harvester in the transverse oscillation-bending dominant vibration, since the flexoelectric effect is sensitive to the strain gradient (bending strain). This study, including theoretical derivations and simulation plots, provide design guidelines in engineering applications for flexoelectric/piezoelectric effect.

Analysis of delamination of unimorph cantilever piezoelectric energy harvesters

2018 ◽  
Vol 29 (9) ◽  
pp. 1875-1883 ◽  
Author(s):  
Shan Zeng ◽  
Chunwei Zhang ◽  
Kaifa Wang ◽  
Baolin Wang ◽  
Li Sun
Keyword(s):  
Power Output ◽  
Failure Modes ◽  
Energy Harvester ◽  
Present Model ◽  
Load Resistance ◽  
Active Length ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Unimorph Cantilever ◽  
Power Outputs

Unimorph piezoelectric energy harvesters are typically a unimorph cantilever beam located on a vibrating host structure. Delamination is one of the major failure modes of such unimorph cantilevers and therefore is studied in this article. The delaminated cantilever unimorph is modeled with one through-width crack using four Euler beams connected at delamination edges. The governing equations, the corresponding boundary conditions, and the kinematic continuity conditions are derived based on the Hamiltonian principle. The solutions of the voltage and power output for the present model are derived. The influence of the position and the length of the delamination, frequency of input base excitation, and load resistance on the voltage and power output are discussed in detail. The results show that delamination in the unimorph of the energy harvester will impressively decrease the voltage and power outputs. Influences of the delamination located at the free end of the cantilever are more obvious. For a given active length of the delaminated cantilever energy harvester, it is useful to increase the overall length of the cantilever to obtain a higher voltage and power outputs.

scholarly journals Load Resistance Optimization of Bi-Stable Electromagnetic Energy Harvester Based on Harmonic Balance

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1505
Author(s):  
Sungryong Bae ◽  
Pilkee Kim
Keyword(s):  
External Load ◽  
Harmonic Balance ◽  
Energy Harvester ◽  
Load Resistance ◽  
Electromagnetic Energy ◽  
Analytic Approach ◽  
Accurate Estimation ◽  
Vibration Source ◽  
Optimal Load ◽  
Matching Techniques

In this study, a semi-analytic approach to optimizing the external load resistance of a bi-stable electromagnetic energy harvester is presented based on the harmonic balance method. The harmonic balance analyses for the primary harmonic (period-1T) and two subharmonic (period-3T and 5T) interwell motions of the energy harvester are performed with the Fourier series solutions of the individual motions determined by spectral analyses. For each motion, an optimization problem for maximizing the output power of the energy harvester is formulated based on the harmonic balance solutions and then solved to estimate the optimal external load resistance. The results of a parametric study show that the optimal load resistance significantly depends on the inductive reactance and internal resistance of a solenoid coil––the higher the oscillation frequency of an interwell motion (or the larger the inductance of the coil) is, the larger the optimal load resistance. In particular, when the frequency of the ambient vibration source is relatively high, the non-linear dynamic characteristics of an interwell motion should be considered in the optimization process of the electromagnetic energy harvester. Compared with conventional resistance-matching techniques, the proposed semi-analytic approach could provide a more accurate estimation of the external load resistance.

scholarly journals Analytical Modeling of a Doubly Clamped Flexible Piezoelectric Energy Harvester with Axial Excitation and Its Experimental Characterization

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3861
Author(s):  
Jie Mei ◽  
Qiong Fan ◽  
Lijie Li ◽  
Dingfang Chen ◽  
Lin Xu ◽  
...  
Keyword(s):  
Output Power ◽  
Power Output ◽  
Output Voltage ◽  
Energy Harvester ◽  
Load Resistance ◽  
Engineering Practice ◽  
Maximum Output ◽  
Widespread Application ◽  
Piezoelectric Energy ◽  
Axial Excitation

With the rapid development of wearable electronics, novel power solutions are required to adapt to flexible surfaces for widespread applications, thus flexible energy harvesters have been extensively studied for their flexibility and stretchability. However, poor power output and insufficient sensitivity to environmental changes limit its widespread application in engineering practice. A doubly clamped flexible piezoelectric energy harvester (FPEH) with axial excitation is therefore proposed for higher power output in a low-frequency vibration environment. Combining the Euler–Bernoulli beam theory and the D’Alembert principle, the differential dynamic equation of the doubly clamped energy harvester is derived, in which the excitation mode of axial load with pre-deformation is considered. A numerical solution of voltage amplitude and average power is obtained using the Rayleigh–Ritz method. Output power of 22.5 μW at 27.1 Hz, with the optimal load resistance being 1 MΩ, is determined by the frequency sweeping analysis. In order to power electronic devices, the converted alternating electric energy should be rectified into direct current energy. By connecting to the MDA2500 standard rectified electric bridge, a rectified DC output voltage across the 1 MΩ load resistor is characterized to be 2.39 V. For further validation of the mechanical-electrical dynamical model of the doubly clamped flexible piezoelectric energy harvester, its output performances, including both its frequency response and resistance load matching performances, are experimentally characterized. From the experimental results, the maximum output power is 1.38 μW, with a load resistance of 5.7 MΩ at 27 Hz, and the rectified DC output voltage reaches 1.84 V, which shows coincidence with simulation results and is proved to be sufficient for powering LED electronics.

scholarly journals Load Resistance Optimization of a Broadband Bistable Piezoelectric Energy Harvester for Primary Harmonic and Subharmonic Behaviors

2021 ◽  
Vol 13 (5) ◽  
pp. 2865 ◽  
Author(s):  
Sungryong Bae ◽  
Pilkee Kim
Keyword(s):  
Energy Harvester ◽  
Load Resistance ◽  
Oscillation Period ◽  
Ambient Vibration ◽  
Ambient Vibrations ◽  
Frequency Dependency ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Optimal Load ◽  
Bistable Energy Harvester

In this study, optimization of the external load resistance of a piezoelectric bistable energy harvester was performed for primary harmonic (period-1T) and subharmonic (period-3T) interwell motions. The analytical expression of the optimal load resistance was derived, based on the spectral analyses of the interwell motions, and evaluated. The analytical results are in excellent agreement with the numerical ones. A parametric study shows that the optimal load resistance depended on the forcing frequency, but not the intensity of the ambient vibration. Additionally, it was found that the optimal resistance for the period-3T interwell motion tended to be approximately three times larger than that for the period-1T interwell motion, which means that the optimal resistance was directly affected by the oscillation frequency (or oscillation period) of the motion rather than the forcing frequency. For broadband energy harvesting applications, the subharmonic interwell motion is also useful, in addition to the primary harmonic interwell motion. In designing such piezoelectric bistable energy harvesters, the frequency dependency of the optimal load resistance should be considered properly depending on ambient vibrations.

scholarly journals Modeling and Experiment of a V-Shaped Piezoelectric Energy Harvester

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Yue Zhao ◽  
Yi Qin ◽  
Lei Guo ◽  
Baoping Tang
Keyword(s):  
Energy Harvesting ◽  
Frequency Band ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Ambient Vibration ◽  
Piezoelectric Bimorph ◽  
Actual Structure ◽  
Piezoelectric Energy ◽  
Operation Frequency

Vibration-based energy harvesting technology is the most promising method to solve the problems of self-powered wireless sensor nodes, but most of the vibration-based energy harvesters have a rather narrow operation bandwidth and the operation frequency band is not convenient to adjust when the ambient frequency changes. Since the ambient vibration may be broadband and changeable, a novel V-shaped vibration energy harvester based on the conventional piezoelectric bimorph cantilevered structure is proposed, which successfully improves the energy harvesting efficiency and provides a way to adjust the operation frequency band of the energy harvester conveniently. The electromechanical coupling equations are established by using Euler-Bernoulli equation and piezoelectric equation, and then the coupled circuit equation is derived based on the series connected piezoelectric cantilevers and Kirchhoff's laws. With the above equations, the output performances of V-shaped structure under different structural parameters and load resistances are simulated and discussed. Finally, by changing the angle θ between two piezoelectric bimorph beams and the load resistance, various comprehensive experiments are carried out to test the performance of this V-shaped energy harvester under the same excitation. The experimental results show that the V-shaped energy harvester can not only improve the frequency response characteristic and the output performance of the electrical energy, but also conveniently tune the operation bandwidth; thus it has great application potential in actual structure health monitoring under variable working condition.

scholarly journals Feasibility of Wireless Horse Monitoring Using a Kinetic Energy Harvester Model

Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1730
Author(s):  
Ben Van Herbruggen ◽  
Jaron Fontaine ◽  
Anniek Eerdekens ◽  
Margot Deruyck ◽  
Wout Joseph ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Ieee 802.15.4 ◽  
Vibrational Energy ◽  
Average Power ◽  
Forward Direction ◽  
Accelerometer Data ◽  
Wireless Data ◽  
Piezoelectric Energy ◽  
Operational Lifetime ◽  
Monitoring Devices

To detect behavioral anomalies (disease/injuries), 24 h monitoring of horses each day is increasingly important. To this end, recent advances in machine learning have used accelerometer data to improve the efficiency of practice sessions and for early detection of health problems. However, current devices are limited in operational lifetime due to the need to manually replace batteries. To remedy this, we investigated the possibilities to power the wireless radio with a vibrational piezoelectric energy harvester at the leg (or in the hoof) of the horse, allowing perpetual monitoring devices. This paper reports the average power that can be delivered to the node by energy harvesting for four different natural gaits of the horse: stand, walking, trot and canter, based on an existing model for a velocity-damped resonant generator (VDRG). To this end, 33 accelerometer datasets were collected over 4.5 h from six horses during different activities. Based on these measurements, a vibrational energy harvester model was calculated that can provide up to 64.04 μW during the energetic canter gait, taking an energy conversion rate of 60% into account. Most energy is provided during canter in the forward direction of the horse. The downwards direction is less suitable for power harvesting. Additionally, different wireless technologies are considered to realize perpetual wireless data sensing. During horse training sessions, BLE allows continues data transmissions (one packet every 0.04 s during canter), whereas IEEE 802.15.4 and UWB technologies are better suited for continuous horse monitoring during less energetic states due to their lower sleep current.

scholarly journals Experimental Study and Parameter Optimization of a Magnetic Coupled Piezoelectric Energy Harvester

2018 ◽  
Vol 8 (12) ◽  
pp. 2609 ◽  
Author(s):  
Xiaobo Rui ◽  
Yibo Li ◽  
Yue Liu ◽  
Xiaolei Zheng ◽  
Zhoumo Zeng
Keyword(s):  
Flux Density ◽  
Parameter Optimization ◽  
Energy Harvester ◽  
Fiber Composite ◽  
Electrical Power ◽  
Low Frequency ◽  
Harmonic Excitation ◽  
Lumped Parameter Model ◽  
Peak Output Power ◽  
Piezoelectric Energy

Piezoelectric energy harvesting is a promising way to develop self-sufficient systems. Structural design and parameter optimization are key issues to improve the performance in applications. This paper presents a magnetic coupled piezoelectric energy harvester to increase the output and bandwidth. A lumped parameter model considering the static position is established and various modes are simulated. This paper focuses on the “Low frequency repulsion mode”, which is more practical. The experiment platform is built with the Macro Fiber Composite (MFC) material, and the results are consistent with the analytical simulation. The optimization process of some key parameters, such as magnets spacing and flux density, is carried out. The results show that there is a corresponding optimal spacing for each flux density, which is positive correlated. With the optimized parameter design, the system achieves peak electrical power of 3.28 mW under the harmonic excitation of 4 m/s2. Compared with the conventional single cantilever harvester, the operated bandwidth is increased by 66.7% and the peak output power is increased by 35.0% in experiment.

scholarly journals Piezoelectric Performance of a Symmetrical Ring-Shaped Piezoelectric Energy Harvester Using PZT-5H under a Temperature Gradient

Micromachines ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 640
Author(s):  
Nannan Zhou ◽  
Rongqi Li ◽  
Hongrui Ao ◽  
Chuanbing Zhang ◽  
Hongyuan Jiang
Keyword(s):  
Growth Rate ◽  
Output Power ◽  
Output Voltage ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Rapid Development ◽  
Coupling Model ◽  
Output Performance ◽  
Piezoelectric Energy ◽  
Changing Trend

With the rapid development of microelectronics technology, low-power electronic sensors have been widely applied in many fields, such as Internet of Things, aerospace, and so on. In this paper, a symmetrical ring-shaped piezoelectric energy harvester (SR-PEH) is designed to provide energy for the sensor to detect the ambient temperature. The finite element method is used by utilizing software COMSOL 5.4, and the electromechanical coupling model of the piezoelectric cantilever is established. The output performance equations are proposed; the microelectromechanical system (MEMS) integration process of the SR-PEH, circuit, and sensor is stated; and the changing trend of the output power density is explained from an energy perspective. In the logarithmic coordinate system, the results indicate that the output voltage and output power are approximately linear with the temperature when the resistance is constant. In addition, the growth rate of the output voltage and output power decreases with an increase of resistance under the condition of constant temperature. In addition, with an increase of temperature, the growth rate of the output power is faster than that of the output voltage. Furthermore, resistance has a more dramatic effect on the output voltage, whereas temperature has a more significant effect on the output power. More importantly, the comparison with the conventional cantilever-shaped piezoelectric energy harvester (CC-PEH) shows that the SR-PEH can improve the output performance and broaden the frequency band.

Sign in / Sign up

Export Citation Format

Share Document