scholarly journals Effect of Dry-Wet Cycles and Freeze-Thaw Cycles on the Antierosion Ability of Fiber-Reinforced Loess

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Changgen Yan ◽  
Ning An ◽  
Yachong Wang ◽  
Weifeng Sun
Keyword(s):  
Internal Friction ◽  
Permeability Coefficient ◽  
Friction Angle ◽  
Reinforced Soil ◽  
Internal Friction Angle ◽  
Hyperbolic Function ◽  
Fiber Reinforced ◽  
Disintegration Rate ◽  
Freeze Thaw ◽  
Number Of Cycles

Compared with plain soil, polypropylene (PP) fiber-reinforced soil has markedly improved mechanical properties and can be used in slope protection projects. To investigate the reduction law of the antierosion ability parameters of PP fiber-reinforced loess under dry-wet (D-W) cycles and freeze-thaw (F-T) cycles, we took loess from Yan’an, China, mixed them with PP fiber, and did shear strength tests, disintegration tests, and permeability tests under D-W cycles and F-T cycles. The experimental results show that D-W cycles or F-T  cycles had a less deteriorating effect on the cohesion, disintegration rate, and permeability coefficient of the fiber-reinforced samples than on plain loess; however, the reduction in their internal friction angle was more obvious. Under D-W cycles or F-T cycles, the cohesion and internal friction angle of the reinforced soil decreased as the number of cycles increased, while the disintegration rate and permeability coefficient increased as the number of cycles increased. The relation between the reduction in the antierosion ability parameters of reinforced soil and the number of D-W cycles or F-T cycles accorded with the hyperbolic function fitting results. The most obvious reduction effect the D-W cycles had on the reinforced soil was on the disintegration rate, followed by cohesion, internal friction angle, and permeability coefficient. The most obvious effect of F-T cycles was also on the disintegration rate, followed by cohesion, permeability coefficient, and internal friction angle. Compared with D-W cycles, F-T cycles had a stronger effect on the reduction in the cohesion, disintegration rate, and permeability coefficient of reinforced soil, but the reduction in the friction angle was greater in D-W cycles.

scholarly journals Effect of Glutinous Rice Slurry on the Reinforcement of Silt in the Yellow River Basin by Microbially Induced Carbonate Precipitation (MICP): Mechanical Property and Microcosmic Structure

2021 ◽  
Vol 2021 ◽  
pp. 1-23
Author(s):  
Jianwei Yue ◽  
Limin Zhao ◽  
Baoxi Zhang ◽  
Qingmei Kong ◽  
Siyuan Wang ◽  
...  
Keyword(s):  
Internal Friction ◽  
Yellow River ◽  
Friction Angle ◽  
Yellow River Basin ◽  
Reinforced Soil ◽  
Internal Friction Angle ◽  
The Yellow River ◽  
Mass Ratio ◽  
Glutinous Rice ◽  
The Yellow River Basin

The silty clay in the lower reaches of the Yellow River is characterized by loose structure, low strength, and strong capillary effect. Based on the technology of ancient glutinous rice mortar and microbial-induced calcium carbonate precipitation (MICP), experiments on optimal mass ratio of cementitious liquid to bacterial liquid and optimal concentration of cementitious liquid for MICP and improved MICP technology were carried out by measuring the production of CaCO3, and direct shear test and unconfined compressive strength test of plain silt, glutinous mixing silt, and improved silt with MICP and modified MICP were conducted. The microstructure of the reaction products of MICP and improved MICP technology were also evaluated based on scanning electron microscopy (SEM). Research results showed that the mechanical properties of silt with glutinous rice slurry were effectively improved. With the increase in the concentration of glutinous rice slurry, the strength and internal friction angle of soil samples first increased and then decreased, and the cohesion presented a linear increasing trend. When the concentration of cementitious liquid was 0.5 M and the mass ratio of cementitious liquid to bacterial liquid was 2 : 1, the amount of CaCO3 formed was the most, and the conversion rate of Ca2+ was more than 80%. The improved MICP could increase the conversion rate of Ca2+ (93.44%). An improved MICP showed that glutinous rice slurry could improve bacterial activity, increase the urease content in the bacterial solution, and promote the production of CaCO3. Silt cohesion and internal friction angle of the silt were improved by the improved MICP technology, and the strengthening effect of mechanical properties of modified MICP-reinforced soil is better than that of the MICP-reinforced soil; conventional MICP technology could also improve the soil cohesion, but the improvement in the internal friction angle was not obvious. The SEM results indicated that compared with the reaction product of MICP technology, the structure of the product of improved MICP technology is more compact, resulting in a marked reinforcement of MICP performance with glutinous rice slurry. This study provides new insights into enhancing the mechanical behaviour of MICP-treated silt in the Yellow River Basin with glutinous rice slurry.

scholarly journals Sensitivity Analysis of Factors Affecting Time-Dependent Slope Stability under Freeze-Thaw Cycles

2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
Zhiguo Chang ◽  
Qingxiang Cai ◽  
Li Ma ◽  
Liu Han
Keyword(s):  
Internal Friction ◽  
Slope Stability ◽  
Mass Density ◽  
Control Variable ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Open Pit ◽  
Test Results ◽  
Factors Affecting ◽  
Freeze Thaw

With open-pit mines excavated, the slopes will be exposed to the natural environment for a long time. Affected by factors like temperature, seepage, mining, freeze-thaw, etc., slope structural integrity and strength will gradually decline as slope exposure time extends. Besides, the development of defect structure within the rocks is closely correlated with time. In this paper, freeze-thaw cycle tests were conducted on the saturated sandstones collected from a certain open-pit mine. According to the test results, the mass density and longitudinal wave velocity gradually increased with more times of freeze-thaw cycles while mechanical properties such as internal friction angle, cohesion, elastic modulus, and uniaxial compressive strength decreased instead. The constitutive model of saturated rock deterioration was established by taking the volume of phase transition of water in microcracks as a variable. Based on the tests results and theoretical analysis, the sensitivity of the factors affecting slope stability under freeze-thaw damage was studied by Control Variable Method (CVM) and Orthogonal Design Method (ODM). It was determined that the internal friction angle and cohesion had a highly significant effect on the test results, while the mass density had a significant effect. The conclusions may play a certain role in guiding slope construction and protection.

Experimental Research on the Characteristics of Soil Strength Freeze-Thaw Weakening in Songhua River Songpu Bank

2014 ◽  
Vol 501-504 ◽  
pp. 403-409
Author(s):  
Xue Han ◽  
Zi Long Zhao ◽  
Zi Rui Gao
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Friction Angle ◽  
Soil Strength ◽  
Internal Friction Angle ◽  
Physical Parameters ◽  
Freezing And Thawing ◽  
Songhua River ◽  
Freeze Thaw ◽  
Soil Shear Strength

In order to study characteristics of soil strength freeze-thaw weakening in the Songhua River Songpu bank，basic physical parameters tests and triaxial compression tests were performed on that paragraph bank .The results showed that: after thawing the sample cohesion will drop substantially, the internal friction angle will increase greatly and soil shear strength will increase significantly; the cohesion of sample after repeated freezing and thawing will significantly decline，internal friction angle of soil will greatly increase，the soil shear strength will increase after the first freezing and thawing，with the increase in the number of freeze-thaw cycles, the soil shear strength will significantly decline. The results can provide Songhua slope stability analysis with a scientific basis.

scholarly journals Improvement of the Salinized Soil Properties of Fly Ash by Freeze-Thaw Cycles: An Impact Test Study

2021 ◽  
Vol 13 (5) ◽  
pp. 2908
Author(s):  
Zhuo Cheng ◽  
Gaohang Cui ◽  
Zheng Yang ◽  
Haohang Gang ◽  
Zening Gao ◽  
...  
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Internal Friction ◽  
Unconfined Compressive Strength ◽  
Saline Soil ◽  
Friction Angle ◽  
Ash Content ◽  
Internal Friction Angle ◽  
Freeze Thaw ◽  
Salinized Soil

To explore the mechanism of the microstructural change in salinized soil under freeze-thaw cycles and the strength characteristics of subgrade salinized soil improved by fly ash, an unconfined compressive test, a triaxial shear test, and a scanning electron microscopy test were carried out using salinized soil samples with different fly ash contents along the Suihua to Daqing expressway in China. The results showed that after several freeze-thaw cycles, the unconfined compressive strength, triaxial shear strength, cohesion, and internal friction angle of saline soil showed a decreasing trend. With an increase in the fly ash content, the internal friction angle, cohesion, unconfined compressive strength, and shear strength of the improved saline soil first increased and then decreased. When the fly ash content was 15%, the mechanical indexes, such as cohesion and the internal friction angle, reached the maximum value. Microscopic test results showed that the freeze-thaw cycle will lead to an increase in the proportion of pores and cracks, an increase in the average pore size, and a loosening of the soil structure. The addition of fly ash can fill the soil pores, improve the microstructure of the soil, increase the cohesive force of the soil particles, and improve the overall strength of the soil. Fly ash (15%) can be added to subgrade soil in the process of subgrade construction in the Suihua-Daqing expressway area to improve the shear strength and the resistance to freezing and thawing cycles. These research results are conducive to promoting the comprehensive utilization of fly ash, improving the utilization rate of resources, and promoting sustainable development, thus providing a reference for the design and construction of saline soil roadbed engineering in seasonal frozen areas and the development and construction of saline land belts in seasonal and winter areas.

scholarly journals Effect of Freeze-Thaw Cycles on the Mechanical Properties of Polyacrylamide- and Lignocellulose-Stabilized Clay in Tibet

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Haiping Shi ◽  
Zhongyao Li ◽  
Wenwei Li ◽  
Shaopeng Wang ◽  
Baotian Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Internal Friction ◽  
Unconfined Compressive Strength ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Test Results ◽  
Freeze Thaw ◽  
Original Strength ◽  
Compressive Tests

Laboratory freezing experiments were conducted to evaluate the effect of polyacrylamide (PAM) and lignocellulose on the mechanical properties and microstructural characteristics of Tibetan clay. Direct shear and unconfined compressive tests and field emission scanning electron microscopy analyses were performed on clay samples with different contents of stabilizers. The test results show that the addition of PAM can improve the unconfined compressive strength and cohesion of Tibetan clay, but an excessive amount of PAM reduces the internal friction angle. After several freeze-thaw cycles, the unconfined compressive strength and cohesion of samples stabilized by PAM decrease significantly, while the internal friction angle increases. Samples stabilized by PAM and lignocellulose have higher internal friction angles, cohesion, and unconfined compressive strength and can retain about 80% of the original strength after 10 freeze-thaw cycles. PAM fills the pores between soil particles and provides adhesion. The addition of lignocellulose can form a network, restrict the expansion of pores caused by freeze-thaw cycles, and improve the integrity of PAM colloids. It is postulated that the addition of a composite stabilizer with a PAM content of 0.4% and a lignocellulose content of 2% may be a technically feasible method to increase the strength of Tibetan clay.

scholarly journals Improvement of Clayey Soils by Combined Bamboo Strip and Flax Fiber Reinforcement

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Fang Tong ◽  
Qiang Ma ◽  
Wenwen Xing
Keyword(s):  
Internal Friction ◽  
Tensile Force ◽  
Fiber Reinforcement ◽  
Friction Angle ◽  
Tensile Tests ◽  
Flax Fiber ◽  
Internal Friction Angle ◽  
Fiber Reinforced ◽  
Confining Pressures ◽  
Reinforced Clay

A combined bamboo strips and flax fiber reinforcement method to reinforce clay is proposed in this paper, and in order to study the mechanical properties of bamboo strips and flax fiber-reinforced clay (BFRC), a series of tensile tests were carried out to obtain the relationship between the average tensile force and deformation of flax fiber and bamboo strip; after that, triaxial shear tests were carried out under the conditions of different confining pressures. In addition, the reinforcement mechanism of the bamboo strips and flax fiber-reinforced clay (BFRC) is analyzed. The test results show that the cohesion and internal friction angle of the bamboo strips and flax fiber-reinforced clay (BFRC) are improved compared with the pure clay. In the case of flax fiber-reinforced clay, the cohesion of reinforced clay is increased by 18.34% and the friction angle is only increased by 0.39%. In the case of bamboo strips and flax fiber-reinforced clay, the cohesion of reinforced clay is increased by 26.36% and the friction angle is only increased by 10.24%. The addition of bamboo strips improves the shear strength of the reinforced clay and effectively improves the deformation resistance of the flax fiber-reinforced clay (FRC). And it increases the internal friction angle and cohesion of the clay, although the increase in the strength is mainly reflected in the influence on the cohesion.

scholarly journals Microscopic Mechanism of the Macroscopic Mechanical Properties of Cement Modified Subgrade Silty Soil Subjected to Freeze-Thaw Cycles

2020 ◽  
Vol 10 (6) ◽  
pp. 2182
Author(s):  
Hanbing Liu ◽  
Shuang Sun ◽  
Lixia Wang ◽  
Yunlong Zhang ◽  
Jing Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Internal Friction ◽  
Particle Diameter ◽  
Morphological Characteristics ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Average Particle ◽  
Freeze Thaw ◽  
Silty Soil

In order to study the effects of the microstructure parameters of cement modified subgrade silty soil (CMSS) in a frozen area under freeze-thaw (F-T) cycles on the macroscopic mechanical properties, the static triaxial test, scanning electron microscopy (SEM), and grey relation analysis (GRA) were implemented on silty soil modified with 0% and 2% cement at optimum moisture content from the northwest in Jilin Province in China. The results showed that the shear strength, the cohesion of 0% and 2% CMSS, decreased with the increase of F-T cycles, while the internal friction angle was not obviously changed. The shear strength and its parameters of 2% CMSS doubled compared to that of 0% CMSS. The micro-parameters, representing the particle morphological characteristics, particle arrangement, and pore characteristics of CMSS, changed differently under F-T cycles. If the cement was not added, the cohesion and the internal friction angle were most sensitive to the average particle diameter (Dp) and the average particle abundance (C), respectively. When the cement content was 2%, the cohesion was chiefly affected by the particle size fractal dimension (Dps), while the internal friction angle was mainly related to the average pore diameter (Dh). The main principle of cement improvement was to decrease Dh of soil under F-T cycles.

Characterization of Shear Strength and Interface Friction of Organic Soil

2020 ◽  
Vol 857 ◽  
pp. 203-211
Author(s):  
Majid Hamed ◽  
Waleed S. Sidik ◽  
Hanifi Canakci ◽  
Fatih Celik ◽  
Romel N. Georgees
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Internal Friction ◽  
Moisture Content ◽  
Water Content ◽  
Friction Angle ◽  
Structural Materials ◽  
Organic Soil ◽  
Internal Friction Angle ◽  
Interface Friction

This study was undertaken to investigate some specific problems that limit a safe design and construction of structures on problematic soils. An experimental study was carried out to examine the influence of loading rate and moisture content on shear strength of organic soil. Influece of moisture content on interface friction between organic soil and structural materials was also attempted. A commonly used soil in Iraq was prepared at varying moisture contents of 39%, 57% and 75%. The experimental results showed that the increase in water content will decrease the shear stress and the internal friction angle. An increase of the shearing rate was found to decrease the shear stress and internal friction angle for all percetanges of water contents. Further, direct shear tests were carried out to detect the interface shear stress behavior between organic soil and structural materials. The results revealed that the increase in water content was shown to have significant negetavie effects on the interface internal friction and angle shear strength.

scholarly journals Influence of Structural Plane Microscopic Parameters on Direct Shear Strength

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Yanhui Cheng ◽  
Weijun Yang ◽  
Dongliang He
Keyword(s):  
Particle Size ◽  
Shear Strength ◽  
Internal Friction ◽  
Direct Shear Test ◽  
Shear Test ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Direct Shear ◽  
Stiffness Ratio ◽  
Structural Plane

Structural plane is a key factor in controlling the stability of rock mass engineering. To study the influence of structural plane microscopic parameters on direct shear strength, this paper established the direct shear mechanical model of the structural plane by using the discrete element code PFC2D. From the mesoscopic perspective, the research on the direct shear test for structural plane has been conducted. The bonding strength and friction coefficient of the structural plane are investigated, and the effect of mesoscopic parameters on the shear mechanical behavior of the structural plane has been analyzed. The results show that the internal friction angle φ of the structural plane decreases with the increase of particle contact stiffness ratio. However, the change range of cohesion is small. The internal friction angle decreases first and then increases with the increase of parallel bond stiffness ratio. The influence of particle contact modulus EC on cohesion c is relatively small. The internal friction angle obtained by the direct shear test is larger than that obtained by the triaxial compression test. Parallel bond elastic modulus has a stronger impact on friction angle φ than that on cohesion c. Under the same normal stress conditions, the shear strength of the specimens increases with particle size. The shear strength of the specimen gradually decreases with the increase of the particle size ratio.

Sign in / Sign up

Export Citation Format

Share Document