scholarly journals Biomechanical Characteristics on the Lower Extremity of Three Typical Yoga Manoeuvres

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Elizabeth Whissell ◽  
Lin Wang ◽  
Pan Li ◽  
Jing Xian Li ◽  
Zhen Wei

This study was aimed at exploring the biomechanical characteristics of the lower extremity amongst three typical yoga manoeuvres. A total of thirteen experienced female yoga practitioners were recruited in the current study; they were all certified with the Yoga Alliance. A three-dimensional motion capture system with 10 cameras combined with four synchronised force plates was used to collect kinematics of the lower extremity and ground reactive force whilst the participants performed the crescent lunge pose, warrior II pose, and triangle pose. One-way repeated ANOVA was used in exploring the differences amongst the three yoga movements, and the significance was set to alpha < 0.05 . The triangle pose performed the largest range of motion (ROM) of the hip ( 90.5 ° ± 22.9 ° ), knee ( 68.8 ° ± 23.1 ° ), and ankle ( 46.4 ° ± 11.3 ° ) in the sagittal plane and the hip ( 54.8 ° ± 6.5 ° ), knee ( 42.4 ° ± 12.8 ° ), and ankle ( 4.8 ° ± 1.7 ° ) in the frontal plane amongst the three manoeuvres ( P < 0.05 ). No significant difference was found for the hip and ankle joint moment amongst the three manoeuvres ( P > 0.05 ). Knee joint travelled into 9.5° of extension and slight adduction of 1.94° whilst expressing the largest knee joint adduction moments ( 0.30 ± 0.22   Nm / kg ) in the triangle pose. The distribution of the angular impulse of the lower limb joints indicated that the hip joint contributed significantly the most in the sagittal and frontal planes of the three yoga manoeuvres ( P < 0.05 ), ranging from 51.67% to 70.56%. Results indicated that triangle pose may be superior to the other two manoeuvres, which improved hip joint ROM, strength, and dynamic stability. However, knee injuries such as osteoarthritis (OA) should be considered because of the large knee extensor angle and adductor moments.

2019 ◽  
Vol 7 (3S) ◽  
pp. 1
Author(s):  
Ajlan Saç

The rate of torque development (RTD), which determines the force that can be developed in the early phase of muscle contraction (0-200 ms), is very important in terms of tracking explosive strength improvement and preventing knee injuries. The purpose of this study was to investigate the relationship of quadriceps angle which affects the structural alignment of the lower extremity with early (0-100 ms) and late (100-200 ms) rate of torque development of the knee extensor muscles and myoelectrical activity. The study was carried out with 38 well-trained male basketball players (mean age: 22.3±2.5 years). The participants were divided into two groups with normal (<11°) and abnormal (>10°) values. RTD was measured in concentric/concentric mode at 60, 120 and 180°/s angular velocities in an isokinetic dynamometer. Surface electromyography (sEMG) was used to determine the myoelectrical activity. When RTD0-100 and RTD100-200 were examined, statistically significant difference was observed at 60 and 120°/s (p<0.05). However, no difference was observed at 180°/s. In addition, sEMG data did not have a statistically significant difference between groups. Negative correlation was found between all RTD at 60, 10 and 180°/s with Q angle (180°/s RTD0-100 r= -0.34, 180°/s RTD100-200 r= -0.35, 120°/s RTD0-100 r= -0.40, 120°/s RTD100-200 r= -0.48, 60°/s RTD0-100 r= -0.55, 60°/s RTD100-200 r= -0.59; p<0.05). There was a negative correlation between the structural differences of the lower extremity and the early and late rate of torque development of the knee extensor muscles. Considering the structural variables, it is thought that it is important to improve the rate of torque development with appropriate resistance training in athletes with variables such as abnormal Q angle, and thus knee injuries can be prevented through athletic development.


Author(s):  
Luke Chowning ◽  
John Krzyszkowski ◽  
Brandon Nunley ◽  
Ryan Lanier ◽  
Isabella Gonzales ◽  
...  

The execution strategy of technical dance movements is constrained by aesthetic and qualitative artistic requirements. As such, there are limited leap-landing strategies that may be used by dancers when executing a grand jeté or saut de chat. The purpose of this study was to determine potential differences in lower extremity angular positioning and joint loading when performing a dance-style leap landing. Fifteen female dancers (age: 20 ± 1 years; height: 1.61 ± 0.13 m; weight: 58.00 ± 11.89 kg) completed six leap-landing trials during which three-dimensional kinematics and kinetics data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES; large ≥ 0.8) were used to compare the following variables: jump height; peak vertical ground reaction force; loading time; loading rate; joint angular positioning of the ankle, knee, hip, and trunk in the frontal and sagittal planes; and joint angular impulse of the ankle, knee, and hip in the frontal and sagittal planes between the dominant and non-dominant limbs. Frontal plane hip angular impulse was significantly greater in the dominant limb (p = 0.023, ES = 1.53). While no other statistically significant differences were observed between dominant and non-dominant limbs, moderate effect sizes were observed for the hip and trunk angles in the frontal plane along with hip impulse in the sagittal plane. This study indicates that dancers might slightly alter their landing strategy at the hip joint when leap-landing onto the dominant limb. Frontal plane hip mechanics should be considered to minimize overuse injury potential in the dominant limb.


Healthcare ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1321
Author(s):  
Wenjing Quan ◽  
Huiyu Zhou ◽  
Datao Xu ◽  
Shudong Li ◽  
Julien S. Baker ◽  
...  

Kinematics data are primary biomechanical parameters. A principal component analysis (PCA) of waveforms is a statistical approach used to explore patterns of variability in biomechanical curve datasets. Differences in experienced and recreational runners’ kinematic variables are still unclear. The purpose of the present study was to compare any differences in kinematics parameters for competitive runners and recreational runners using principal component analysis in the sagittal plane, frontal plane and transverse plane. Forty male runners were divided into two groups: twenty competitive runners and twenty recreational runners. A Vicon Motion System (Vicon Metrics Ltd., Oxford, UK) captured three-dimensional kinematics data during running at 3.3 m/s. The principal component analysis was used to determine the dominating variation in this model. Then, the principal component scores retained the first three principal components and were analyzed using independent t-tests. The recreational runners were found to have a smaller dorsiflexion angle, initial dorsiflexion contact angle, ankle inversion, knee adduction, range motion in the frontal knee plane and hip frontal plane. The running kinematics data were influenced by running experience. The findings from the study provide a better understanding of the kinematics variables for competitive and recreational runners. Thus, these findings might have implications for reducing running injury and improving running performance.


2017 ◽  
Vol 33 (1) ◽  
pp. 56-63 ◽  
Author(s):  
D.S. Blaise Williams ◽  
Jonathan H. Cole ◽  
Douglas W. Powell

Running during sports and for physical activity often requires changes in velocity through acceleration and deceleration. While it is clear that lower extremity biomechanics vary during these accelerations and decelerations, the work requirements of the individual joints are not well understood. The purpose of this investigation was to measure the sagittal plane mechanical work of the individual lower extremity joints during acceleration, deceleration, and steady-state running. Ten runners were compared during acceleration, deceleration, and steady-state running using three-dimensional kinematics and kinetics measures. Total positive and negative joint work, and relative joint contributions to total work were compared between conditions. Total positive work progressively increased from deceleration to acceleration. This was due to greater ankle joint work during acceleration. While there was no significant change in total negative work during deceleration, there was a greater relative contribution of the knee to total negative work with a subsequent lower relative ankle negative work. Each lower extremity joint exhibits distinct functional roles in acceleration compared with deceleration during level running. Deceleration is dominated by greater contributions of the knee to negative work while acceleration is associated with a greater ankle contribution to positive work.


2019 ◽  
Vol 32 (03) ◽  
pp. 241-249 ◽  
Author(s):  
Andrew Worth ◽  
Katherine Crosse ◽  
Andrew Kersley

Objective The aim of this study was to report the use of custom saw guides produced using computed tomographic imaging (CT), computer simulation and three-dimensional (3D) printing to aid surgical correction of antebrachial deformities in six dogs. Materials and Methods Antebrachial limb deformities in four small, and two large, breed dogs (seven limbs) were surgically corrected by a radial closing wedge ostectomy and ulnar osteotomy. The location and orientation of the wedge ostectomy were determined using CT data, computer-assisted planning and production of a saw guide in plastic using a 3D printer. At surgery, the guide was clamped to the surface of the radius and used to direct the oscillating saw blade. The resultant ostectomy was closed and stabilized with a bone plate. Results Five limbs healed without complications. One limb was re-operated due to a poorly resolved rotational component of the deformity. One limb required additional stabilisation with external fixation due to screw loosening. The owners of five dogs completed a Canine Orthopedic Index survey at a follow-up period of 37 to 81 months. The median preoperative score was 3.5 and the median postoperative score was 1, representing an overall positive effect of surgery. Radiographically, 5/7 limbs were corrected in the frontal plane (2/7 were under-corrected). Similarly, 5/7 limbs were corrected in the sagittal plane, and 2/7 were over-corrected in the sagittal place. Conclusions Computer-aided design and rapid prototyping technologies can be used to create saw guides to simplify one-stage corrective osteotomies of the antebrachium using internal fixation in dogs. Despite the encouraging results, accurate correction of rotational deformity was problematic and this aspect requires further development.


2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Søren Rytter ◽  
Lilli Kirkeskov Jensen ◽  
Jens Peter Bonde ◽  
Niels Egund

Objective. To determine the risk of intra- and periarticular cyst-like lesions of the knee joint in occupational kneeling.Methods. Magnetic resonance imaging of both knees (n=282) was conducted in 92 male floor layers and 49 male graphic designers (referents), with a mean age of 55.6 years (range 42–70 years). The prevalence of cyst-like lesions was computed among floor layers and graphic designers, respectively, and associations with occupation summarized by odds ratio (OR) with 95% confidence intervals (CIs). Using logistic regression, models were adjusted for age, body mass index, knee injuries, and knee-straining sports.Results. Floor layers had a significantly higher prevalence of cyst-like lesions in the posterior part of the knee joint compared to graphic designers (OR 2.70, 95% CI 1.50–4.84). Floor layers also had a higher prevalence of fluid collections in the popliteus tendon recess (OR 2.17, 95% CI 0.99–4.77) and large cystic lesions of the popliteus muscle (OR 3.83, 95% CI 0.78–18.89). The prevalence of cystic lesions in the anterior part of the knee joint was low among floor layers (8.7%) and there was no significant difference between the two trade groups (P=0.34).Conclusions. Occupational kneeling increases the risk of cyst-like lesions in the posterior part of the knee joint.


Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4138
Author(s):  
Mohsen Safaei ◽  
Nicholas B. Bolus ◽  
Alper Erturk ◽  
Omer T. Inan

Injuries and disorders affecting the knee joint are very common in athletes and older individuals. Passive and active vibration methods, such as acoustic emissions and modal analysis, are extensively used in both industry and the medical field to diagnose structural faults and disorders. To maximize the diagnostic potential of such vibration methods for knee injuries and disorders, a better understanding of the vibroacoustic characteristics of the knee must be developed. In this study, the linearity and vibration transmissibility of the human knee were investigated based on measurements collected on healthy subjects. Different subjects exhibit a substantially different transmissibility behavior due to variances in subject-specific knee structures. Moreover, the vibration behaviors of various subjects’ knees at different leg positions were compared. Variation in sagittal-plane knee angle alters the transmissibility of the joint, while the overall shape of the transmissibility diagrams remains similar. The results demonstrate that an adjusted stimulation signal at frequencies higher than 3 kHz has the potential to be employed in diagnostic applications that are related to knee joint health. This work can pave the way for future studies aimed at employing acoustic emission and modal analysis approaches for knee health monitoring outside of clinical settings, such as for field-deployable diagnostics.


2020 ◽  
Vol 20 (09) ◽  
pp. 2040012
Author(s):  
GEON KIM ◽  
JIHEE JUNG ◽  
YOUNGJOO CHA ◽  
JOSHUA (SUNG) H. YOU

Hyperpronation of the foot is believed to contribute to ankle hypermobility and associated stiffness reduction, but the underlying biomechanical mechanisms remain unknown. This study aimsed to investigate multidirectional ankle displacement and associated stiffness when a posterior–anterior impact force was applied to the posterior knee compartment. Forty healthy adults with and without foot hyperpronation were recruited. A three-dimensional motion capture system and force plates were used to acquire angular displacement and ankle joint moment data. The independent [Formula: see text]-test and Mann–Whitney [Formula: see text] test were used to compare the group differences in ankle angular displacement, moment, and stiffness. Spearman’s rho test was performed to determine the relationship between ankle angular displacement and stiffness. The hyperpronation group demonstrated significantly greater sagittal ([Formula: see text]) and frontal plane ([Formula: see text]) angular displacements and reduced sagittal plane ankle stiffness ([Formula: see text]) than the neutral group. The Spearman’s correlation analysis showed a close inverse relationship between the ankle angular displacement and stiffness, ranging from [Formula: see text] to [Formula: see text]. The biomechanical data in our study suggest that individuals with foot hyperpronation present with multidirectional hypermobility and a reduction in ankle stiffness. These factors contribute to an increased risk of ankle-foot injury in individuals with foot hyperpronation.


2020 ◽  
Vol 12 (7) ◽  
pp. 2684 ◽  
Author(s):  
Giuseppe Battaglia ◽  
Valerio Giustino ◽  
Giuseppe Messina ◽  
Mariangela Faraone ◽  
Jessica Brusa ◽  
...  

Background: The Geriatric Unit of the University of Palermo developed the “Passiata Day” model, a green exercise intervention consisting of a one-hour walk, once/week, in a city park. The purpose of this study was to assess body balance in older people who walked regularly compared to sedentary people. Methods: 106 older people (75 women and 31 men; mean age: 72.3 ± 8.2 years) without fall history were invited to participate voluntarily in this natural environment walking program. After six months, both the participants who had taken part regularly in the walk (i.e., the physical activity group (PAG; n = 72; 54 women and 18 men; mean age: 70.7 ± 7.2 years)), and who had not accepted to be included in the outdoor walking program (i.e., the sedentary group (SG; n = 34; 21 women and 13 men; mean age: 75.5 ± 9.4 years)), performed a stabilometric test with open eyes (OE) and with closed eyes (CE). Results: Our preliminary results showed significant differences between groups on the ellipse sway area both in the OE (p < 0.05) and in CE condition (p < 0.01). Moreover, we found a significant difference on sway along the frontal plane both in the OE (p < 0.05) and in the CE condition (p < 0.01), and on sway along the sagittal plane for the test with CE (p < 0.01). Conclusion: Based on our preliminary findings, we suggest that walking regularly in an outdoor setting could lead to a greater body balance in older people and could be recommended by geriatricians for preventing the risk of falls. The next step will be to investigate the effect of an experimental outdoor walking program structured in terms of intensity, frequency and volume.


Author(s):  
Andrew D. Nordin ◽  
Joshua P. Bailey ◽  
Janet S. Dufek

The purpose of this examination was to explore the effects of stride length (SL) perturbations on walking gait, relative to preferred walking (PW) and running (PR), via lower extremity range of motion (ROM) variability. ROM variability at the hip, knee, and ankle joints, in the sagittal and frontal planes were used in evaluating motor control of gait, where increased gait variability has been previously implicated in fall susceptibly. Nine participants (5 male, 4 female; mean age 23.11±3.55 years, height 1.72±0.18m, mass 72.66±14.37kg) free from previous lower extremity injury were examined. Kinematic data were acquired using a 12-camera system (Vicon MX T40-S; 200Hz). Data filtering and interpolation included a low pass, 4th order, Butterworth filter (15Hz cutoff) and cubic spline. Five gait trials were completed for PW and PR, with subsequent SL manipulations computed as a percentage of leg length (LL). SL perturbations included 60%, 80%, 100%, 120%, and 140% of LL. Kinematic analysis involved one stride (two steps) during each gait trial, assessing ROM at the hip, knee, and ankle from heel contact to toe-off for each limb, in the sagittal and frontal planes. Variability was expressed using coefficient of variation (%). Comparisons were made using 3×7 (joint × stride condition) mixed model ANOVAs, with repeated measures on stride condition (α = 0.05), using SPSS 20.0. Differences in lower extremity ROM variability were detected among stride conditions in the frontal and sagittal planes (F[3.185,76.451] = 3.004, p = .033; F[4.595,110.279] = 2.834, p = .022, respectively). Greater ROM variability was observed at, and in excess of SLs of 100%LL relative to PW in the frontal plane (PW: 9.2±4.2%; 100%LL: 11.8±3.6%, p = .014; 120%LL: 13.5±5.8%, p = .046; 140%LL: 13.8±6.5%, p = .016), and between SLs of 80%LL and 120%LL in the sagittal plane (4.9±3.0%; 7.8±4.7%, p = .046, respectively). From this, PW appeared to occur within SLs of 60%LL to 80%LL, while SLs exceeding 100%LL resulted in increased lower extremity ROM variability. This may have consequences for fall susceptibility at increased stride lengths during walking. PR did not reveal significant variability differences (p>.05) compared to walking conditions in either the sagittal or frontal plane (7.5±5.0%; 12.8±7.7%, respectively), suggesting that running represents a separate, but stable gait pattern. In the sagittal plane, ROM variability was significantly lower at the hip (3.9±1.5%), relative to the ankle (8.4±1.6%, p<.001) and knee joints (7.4±2.6%, p = .001), suggesting that gait control may be more active at the ankle and knee joints. Future investigations should examine kinetic changes in gait when altering stride length.


Sign in / Sign up

Export Citation Format

Share Document