scholarly journals Impact of Geological Factors on Marine Shale Gas Enrichment and Reserve Estimation: A Case Study of Jiaoshiba Area in Fuling Gas Field

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Siyu Yu ◽  
Xixin Wang ◽  
Shaohua Li ◽  
Yuming Liu ◽  
Liming Xiao ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Gas Content ◽  
Accurate Estimation ◽  
Gas Field ◽  
Adsorbed Gas ◽  
Marine Shale ◽  
Geological Factors ◽  
The Impact

Geological factors are key elements to control shale gas enrichment and influence the accurate estimation of shale gas reserve. However, the impact of the main geological factors, such as porosity, mineralogy, and organic matter, on marine shale gas enrichment and reserve calculation has not yet been fully clarified. Herein, we measured gas adsorption, porosity, mineralogical composition, and total organic carbon content of the marine shale samples from the Jiaoshiba area of Fuling gas field in Sichuan Basin, South China, and investigate the relationships between the geological factors and the adsorbed gas content. The results show that adsorbed gas content is positively correlated with total organic carbon and porosity; the larger specific surface area of samples with more clay minerals essentially contributes to shale gas enrichment. Additionally, the sealing of faults imposes a significant impact on shale gas accumulation. The probability volume method was applied to calculate the shale gas reserve. The reserves of P90 (the most pessimistic reserve), P50 (the most likely reserve), and P10 (the most optimistic reserve) were calculated, respectively, which provides useful information to reduce the risk in shale gas development.

The Gas Content Characteristics of Nanopores Developed in a Normal Pressure Shale Gas Reservoir in Southeast Chongqing, Sichuan Basin, China

2021 ◽  
Vol 21 (1) ◽  
pp. 698-706
Author(s):  
Fangwen Chen ◽  
Qiang Zheng ◽  
Hongqin Zhao ◽  
Xue Ding ◽  
Yiwen Ju ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Shale Gas ◽  
Normal Pressure ◽  
Gas Content ◽  
Organic Carbon Content ◽  
Gas Reservoir ◽  
Free Gas ◽  
Shale Gas Reservoir ◽  
Adsorbed Gas ◽  
Longmaxi Shale

To evaluate the gas content characteristics of nanopores developed in a normal pressure shale gas reservoir, the Py1 well in southeast Chongqing was selected as a case study. A series of experiments was performed to analyze the total organic carbon content, porosity and gas content using core material samples of the Longmaxi Shale from the Py1 well. The results show that the adsorbed gas and free gas content in the nanopores developed in the Py1 well in the normal pressure shale gas reservoir range from 0.46–2.24 m3/t and 0.27–0.83 m3/t, with average values of 1.38 m3/t and 0.50 m3/t, respectively. The adsorbed gas is dominant in the shale gas reservoir, accounting for 53.05–88.23% of the total gas with an average value of 71.43%. The Gas Research Institute (GRI) porosity and adsorbed gas content increase with increasing total organic carbon content. The adsorbed gas and free gas contents both increase with increasing porosity value, and the rate of increase in the adsorbed gas content with porosity is larger than that of free gas. Compared with the other five shale reservoirs in America, the Lower Silurian Longmaxi Shale in the Py1 well developed nanopores but without overpressure, which is not favorable for shale gas enrichment.

scholarly journals Geological models and controlling factors of gas content in marine–terrigenous shale in the Southern Qinshui Basin, China

2018 ◽  
Vol 37 (1) ◽  
pp. 375-393 ◽  
Author(s):  
Xiaowei Hou ◽  
Yanming Zhu ◽  
Zhenfei Jiang ◽  
Haitao Gao
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Carbon Content ◽  
Adsorption Capacity ◽  
Total Organic Carbon Content ◽  
Gas Content ◽  
Organic Carbon Content ◽  
Isothermal Adsorption ◽  
Free Gas ◽  
Adsorbed Gas

Geological prediction models for gas content in marine–terrigenous shale under the effects of reservoir characteristics and in situ geological conditions, were established using methane isothermal adsorption, high temperature/pressure methane isothermal adsorption, total organic carbon, X-ray diffraction, mercury porosimetry, porosity in net confining stress, and field desorption methods. Results indicated that the adsorption capacity of marine–terrigenous shale has a linearly positive correlation with total organic carbon content and maturity. Clay and quartz minerals are the two main components of inorganic minerals in marine–terrigenous shale, with an average content of 54.3% and 36.9%, respectively. Adsorption capacity of marine–terrigenous shale is slightly positive correlated with clay content, while it exponentially decreases with increasing quartz content. The effects of in situ temperature and reservoir pressure on adsorption capacity in marine–terrigenous shale are also significant. The adsorption capacity of marine–terrigenous shale shows a clear decreasing trend as temperature increases, while it increases with increasing reservoir pressure. The porosity of marine–terrigenous shale is characterized by highly stress-sensitive, decreasing exponentially with increasing effective stress, which results in a more complex occurrence of free gas in deep shale reservoirs. In addition, gas saturation for the shale samples was calculated based on the results of field desorption, after which geological prediction models of total gas, adsorbed gas, and free gas were established while considering the coupled effects. Adsorbed gas, free gas, and total gas content all initially increase as burial depth increases, and then eventually decrease. Adsorbed gas content and free gas content have a positive correlation with total organic carbon content and porosity, indicating that the total gas content at different burial depths is mainly controlled by the total organic carbon content and porosity.

scholarly journals Shale favorable area optimization in coal-bearing series: A case study from the Shanxi Formation in Northern Ordos Basin, China

2017 ◽  
Vol 36 (5) ◽  
pp. 1295-1309 ◽  
Author(s):  
Wei Guo ◽  
Weijun Shen ◽  
Shangwen Zhou ◽  
Huaqing Xue ◽  
Dexun Liu ◽  
...  
Keyword(s):  
Organic Matter ◽  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Ordos Basin ◽  
Sedimentary Facies ◽  
Gas Content ◽  
Burial Depth ◽  
Organic Carbon Content ◽  
River Channels

Shales in the Well district of Yu 106 of the Shanxi Formation in the Eastern Ordos Basin is deposited in the swamp between delta plains, distributary river channels, natural levee, the far end of crevasse splay, and depression environments. According to organic geochemistry, reservoir physical property, gas bearing capacity, lithology experimental analysis, combined with the data of drilling, logging, testing and sedimentary facies, the reservoir conditions of shale gas and the distribution of an advantageous area in Shanxi Formation have been conducted. The results show that the total organic carbon content of the Shanxi Formation is relatively high, with an average content value of 5.28% in the segment 2 and 3.02% in segment 1, and the organic matter is mainly kerogen type II2 and III. The maturity of organic matter is high with 1.89% as the average value of Ro which indicates the superior condition for gas generation of this reservoir. The porosity of shales is 1.7% on average, and the average permeability is 0.0415 × 10−3 µm2. The cumulative thickness is relatively large, with an average of 75 m. Brittle mineral and clay content in shales are 49.9% and 50.1%, respectively, but the burial depth of shale is less than 3000 m. The testing gas content is relatively high (0.64 × 104 m3/d), which shows a great potential in commercial development. The total organic carbon of the segment 2 is higher than that of the segment 1, and it is also better than segment 1 in terms of gas content. Based on the thickness of shale and the distribution of sedimentary facies, it is predicted that the advantageous area of shale gas in the segment 2 is distributed in a striped zone along the northeast and the northsouth direction, which is controlled by the swamp microfacies between distributary river channels.

scholarly journals Deflating the shale gas potential of South Africa’s Main Karoo basin

2017 ◽  
Vol 113 (9/10) ◽  
Author(s):  
Michiel de Kock ◽  
Nicolas Beukes ◽  
Elijah Adeniyi ◽  
Doug Cole ◽  
Annette Götz ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Vitrinite Reflectance ◽  
Gas Content ◽  
Carbonaceous Shale ◽  
Organic Carbon Content ◽  
Hydrocarbon Generation ◽  
Developmental Potential ◽  
Karoo Basin

The Main Karoo basin has been identified as a potential source of shale gas (i.e. natural gas that can be extracted via the process of hydraulic stimulation or ‘fracking’). Current resource estimates of 0.4–11x109 m3 (13–390 Tcf) are speculatively based on carbonaceous shale thickness, area, depth, thermal maturity and, most of all, the total organic carbon content of specifically the Ecca Group’s Whitehill Formation with a thickness of more than 30 m. These estimates were made without any measurements on the actual available gas content of the shale. Such measurements were recently conducted on samples from two boreholes and are reported here. These measurements indicate that there is little to no desorbed and residual gas, despite high total organic carbon values. In addition, vitrinite reflectance and illite crystallinity of unweathered shale material reveal the Ecca Group to be metamorphosed and overmature. Organic carbon in the shale is largely unbound to hydrogen, and little hydrocarbon generation potential remains. These findings led to the conclusion that the lowest of the existing resource estimates, namely 0.4x109 m3 (13 Tcf), may be the most realistic. However, such low estimates still represent a large resource with developmental potential for the South African petroleum industry. To be economically viable, the resource would be required to be confined to a small, well-delineated ‘sweet spot’ area in the vast southern area of the basin. It is acknowledged that the drill cores we investigated fall outside of currently identified sweet spots and these areas should be targets for further scientific drilling projects.

scholarly journals Porosity and Water Saturation Estimation for Shale Reservoirs: An Example from Goldwyer Formation Shale, Canning Basin, Western Australia

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6294
Author(s):  
Muhammad Atif Iqbal ◽  
Reza Rezaee
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Western Australia ◽  
Water Saturation ◽  
Clay Content ◽  
Total Porosity ◽  
Gas Content ◽  
Accurate Estimation ◽  
Canning Basin ◽  
Shale Reservoirs

Porosity and water saturation are the most critical and fundamental parameters for accurate estimation of gas content in the shale reservoirs. However, their determination is very challenging due to the direct influence of kerogen and clay content on the logging tools. The porosity and water saturation over or underestimate the reserves if the corrections for kerogen and clay content are not applied. Moreover, it is very difficult to determine the formation water resistivity (Rw) and Archie parameters for shale reservoirs. In this study, the current equations for porosity and water saturation are modified based on kerogen and clay content calibrations. The porosity in shale is composed of kerogen and matrix porosities. The kerogen response for the density porosity log is calibrated based on core-based derived kerogen volume. The kerogen porosity is computed by a mass-balance relation between the original total organic carbon (TOCo) and kerogen maturity derived by the percentage of convertible organic carbon (Cc) and the transformation ratio (TR). Whereas, the water saturation is determined by applying kerogen and shale volume corrections on the Rt. The modified Archie equation is derived to compute the water saturation of the shale reservoir. This equation is independent of Rw and Archie parameters. The introduced porosity and water saturation equations are successfully applied for the Ordovician Goldwyer formation shale from Canning Basin, Western Australia. The results indicate that based on the proposed equations, the total porosity ranges from 5% to 10% and the water saturation ranges from 35% to 80%. Whereas, the porosity and water saturation were overestimated by the conventional equations. The results were well-correlated with the core-based porosity and water saturation. Moreover, it is also revealed that the porosity and water saturation of Goldwyer Formation shale are subjected to the specific rock type with heterogeneity in total organic carbon total clay contents. The introduced porosity and water saturation can be helpful for accurate reserve estimations for shale reservoirs.

scholarly journals Reservoir Characteristics of the Lower Silurian Longmaxi Shale in Zhaotong Region, Southern China

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Chao Luo ◽  
Nanxin Yin ◽  
Hun Lin ◽  
Xuanbo Gao ◽  
Junlei Wang ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Southern China ◽  
Gas Content ◽  
High Quality ◽  
Longmaxi Formation ◽  
Lower Silurian ◽  
Longmaxi Shale ◽  
Scanning Electron

The lower Silurian Longmaxi Formation hosts a highly productive shale gas play in the Zhaotong region of southern China. According to core observation, X-ray diffraction analyses, and scanning electron microscopy (SEM) observations, the shale comprises primarily quartz, carbonate minerals, and clay minerals, with minor amounts of plagioclase, K-feldspar, and pyrite. The clay mineral content ranges from 15.0% to 46.1%, with an average of 29.3% in the Zhaotong region. Organic geochemical analyses show that the Longmaxi Formation has good potential for shale gas resources by calculating total organic carbon, vitrinite reflectance, and gas content. Scanning electron microscope images demonstrate that reservoir pore types in the Longmaxi shale include organic pores, interparticle pores, intercrystalline pores, intraparticle pores, and fractures. Reservoir distribution is controlled by lithofacies, mineral composition, and geochemical factors. In addition, we investigated the relationships between reservoir parameters and production from 15 individual wells in the Zhaotong region by correlation coefficients. As a result, the brittleness index, total organic carbon (TOC), porosity, and gas content were used to define high-quality reservoirs in the Longmaxi shale. Based on these criteria, we mapped the thickness and distribution of high-quality reservoirs in the Longmaxi Formation and selected highlighted several key sites for future exploration and development.

Logging Evaluation Method and its Application for Measuring the Total Organic Carbon Content in Shale

2014 ◽  
Vol 962-965 ◽  
pp. 51-54
Author(s):  
Zhi Feng Wang ◽  
Yuan Fu Zhang ◽  
Hai Bo Zhang ◽  
Qing Zhai Meng
Keyword(s):  
Organic Carbon ◽  
Total Organic Carbon ◽  
Shale Gas ◽  
Sichuan Basin ◽  
Evaluation Method ◽  
Organic Carbon Content ◽  
Geochemical Analysis ◽  
Data Logging ◽  
Longmaxi Formation ◽  
Sedimentary Structures

The acquisition of the total organic carbon (TOC) content mainly relies on the geochemical analysis and logging data. Due to geochemical analysis is restricted by coring and experimental analysis, so it is difficult to get the continuous TOC data. Logging evaluation method for measuring TOC is very important for shale gas exploration. This paper presents a logging evaluation method that the shale is segmented according to sedimentary structures. Sedimentary structures were recognized by core, thin section and scanning electron microscope. Taking Wufeng-Longmaxi Formation, Silurian, Muai Syncline Belt, south of Sichuan Basin as research object, the shale is divided into three kinds: massive mudstone, unobvious laminated mudstone, and laminated mudstone. TOC within each mudstone are calculated using GR, resistivity and AC logging data, and an ideal result is achieved. This method is more efficient, faster and the vertical resolution is higher than △logR method.

Sign in / Sign up

Export Citation Format

Share Document