scholarly journals Postsurgical Prosthetic Rehabilitation after Mandibular Ameloblastoma Resection: A 7-Year Follow-Up Case Report

2021 ◽  
Vol 2021 ◽  
pp. 1-5
Author(s):  
C. Moreno-Soriano ◽  
A. Estrugo-Devesa ◽  
P. Castañeda-Vega ◽  
E. Jané-Salas ◽  
J. López-López
Keyword(s):  
Case Report ◽  
Computer Aided Design ◽  
Lower Hybrid ◽  
Prosthetic Rehabilitation ◽  
Oral Rehabilitation ◽  
Clinical Complications ◽  
Safety Margins ◽  
Computer Aided ◽  
Hybrid Prosthesis

Ameloblastomas are benign but locally invasive odontogenic tumors most frequently located in the mandible. The gold standard of treatment is the surgical resection of the tumor with safety margins. Postsurgical defects generate a significant morbidity that needs reconstruction and oral rehabilitation to restore the oral functions. This case report describes the prosthetic rehabilitation of a 42-year-old male after resection of a mandibular ameloblastoma. Excision of the lesion by segmental mandibulectomy and mandibular reconstruction by microvascularized fibula flap was performed. After placement of 6 dental implants, the patient was rehabilitated with a lower hybrid prosthesis fabricated using computer-aided design-computer-aided manufacturing. During a 7-year and 5-month follow-up, some clinical complications were observed.

CAD/CAM Endocrown Fabrication from a Polymer-Infiltrated Ceramic Network Block for Primary Molar: A Case Report

2016 ◽  
Vol 40 (4) ◽  
pp. 264-268 ◽  
Author(s):  
Mehmet Selim Bilgin ◽  
Ali Erdem ◽  
Mehmet Tanrıver
Keyword(s):  
Case Report ◽  
Computer Aided Design ◽  
Resin Cement ◽  
Primary Tooth ◽  
Primary Molar ◽  
Long Term Treatment ◽  
Computer Aided ◽  
Cad Cam

Objective: The aim of this case report is to describe the treatment of a primary molar with a deep carious lesion by pulpotomy and placement of a ceramic endocrown. Clinical case: A 7-year-old male patient with profound caries in tooth number 85 was referred to our clinic and underwent a pulpotomy. As the final treatment in tooth restoration, placement of an endocrown was planned, because little more than half of the tooth structure remained. After an additional request from the patient's parents for an advanced and prompt restoration, a computer-aided design/computer-aided manufacturing (CAD/CAM) polymer-infiltrated ceramic network (PICN) block was chosen. A three-dimensional model of the arch was obtained after scanning the dental cast, and the endocrown was designed digitally according to the model. When the design was complete, the endocrown was fabricated with a milling machine. Finally, the endocrown was cemented with self-adhesive resin cement. Results: Over the 9-month follow-up period, no pulpal or periradicular pathology was observed on radiographs. Regarding the crown, the marginal fit was excellent, the anatomical form was protected, and no discoloration occurred. Conclusion: During follow-up, the CAD/CAM PICN block endocrown proved to be a good material for the short- to long-term treatment of a primary tooth. However, more clinical cases and follow-up are required to investigate the long-term effects of antagonistic tooth wear.

scholarly journals Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Vincenzo Luca Zizzari ◽  
Gianmarco Tacconelli
Keyword(s):  
Case Report ◽  
Dental Implants ◽  
Computer Aided Design ◽  
Computer Aided ◽  
One Year ◽  
Aided Design

The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR) with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

scholarly journals Pragmatic approach to rehabilitate maxillary teeth in aesthetic zone using resin bonded FDP- A case report

2021 ◽  
Vol 7 (4) ◽  
pp. 226-229
Author(s):  
Saurav Kumar ◽  
Harsh Rathee ◽  
Parag Dua
Keyword(s):  
Case Report ◽  
Cost Effective ◽  
Missing Teeth ◽  
Maxillary Central Incisor ◽  
Clinical Complications ◽  
Fixed Partial Denture ◽  
Fixed Dental Prosthesis ◽  
Effective Option ◽  
Aesthetic Results

Resin bonded fixed dental prosthesis offers most conservative and cost-effective option with missing teeth in aesthetic zone specially when an implant prosthesis is not indicated. This case report describes a treatment option for the replacement of a missing maxillary central incisor using a double-retainer resin-bonded fixed partial denture (RBFPD), fabricated from zirconium dioxide (ZrO) ceramic. No clinical complications were observed at follow-up examination after placement of the prosthesis. Satisfactory functional and aesthetic results were achieved. A treatment modality using a ZrO ceramic RBFPD is an alternative for single anterior tooth replacement.

scholarly journals Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Ala Hassan A. Qamheya ◽  
Sinem Yeniyol ◽  
Volkan Arısan
Keyword(s):  
Case Report ◽  
Dental Implant ◽  
Complete Denture ◽  
Fiber Reinforced ◽  
Oral Rehabilitation ◽  
Healthy Life ◽  
Hybrid Prosthesis ◽  
Fiber Reinforced Material ◽  
Sore Mouth

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient.

scholarly journals Computer-designed selective laser sintering surgical guide and immediate loading dental implants with definitive prosthesis in edentulous patient: A preliminary method

2014 ◽  
Vol 08 (01) ◽  
pp. 100-106 ◽  
Author(s):  
Giovanni Di Giacomo ◽  
Jorge Silva ◽  
Rodrigo Martines ◽  
Sergio Ajzen
Keyword(s):  
Dental Implants ◽  
Computer Aided Design ◽  
Manufacturing Systems ◽  
Surgical Planning ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Angular Deviation ◽  
Surgical Guide ◽  
Computer Aided

ABSTRACT Objective: The aim of this study was to analyze a preliminary method of immediately loading dental implants and a definitive prosthesis based on the computer-aided design/computer-aided manufacturing systems, after 2 years of clinical follow-up. Materials and Methods: The study comprised one patient in good general health with edentulous maxilla. Cone beam computer tomography (CBCT) was performed using a radiographic template. The surgical plan was made using the digital imaging and communications in medicine protocol with ImplantViewer (version 1.9, Anne Solutions, Sao Paulo, SP, Brazil), the surgical planning software. These data were used to produce a selective laser sintering surgical template. A maxilla prototype was used to guide the prosthesis technician in producing the prosthesis. Eight dental implants and a definitive prosthesis were installed on the same day. A post-operative CBCT image was fused with the image of the surgical planning to calculate the deviation between the planned and the placed implants positions. Patient was followed for 2 years. Results: On average, the match between the planned and placed angular deviation was within 6.0 ± 3.4° and the difference in coronal deviation was 0.7 ± 0.3 mm. At the end of the follow-up, neither the implant nor the prosthesis was lost. Conclusions: Considering the limited samples number, it was possible to install the dental implants and a definitive prosthesis on the same day with success.

scholarly journals Monitoring Alveolar Ridge Remodelling Post-Extraction Using Sequential Intraoral Scanning over a Period of Four Months

2020 ◽  
Vol 17 (18) ◽  
pp. 6638
Author(s):  
Khaled E. Ahmed
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Dimensional Changes ◽  
Intraoral Scanning ◽  
Computer Aided ◽  
Potential Applications ◽  
Cad Cam ◽  
Aided Design ◽  
2D And 3D

The potential applications of computer-aided design/computer-aided manufacturing (CAD/CAM) and intraoral scanning exceed the delivery of standard prosthodontic interventions. The aim of this study was to clinically present a developed assessment technique, that relies on the use of sequential intraoral scanning, three-dimensional superimposition, and 2D and 3D deviation analyses based on a standardised protocol, as an auxiliary tool in monitoring dimensional changes of residual ridge post-extraction with a follow-up period of four months.

Rare Association of Klippel Feil Syndrome with Cleft Palate and Congenital Cardiac Deformities: A Case Report

2010 ◽  
Vol 35 (2) ◽  
pp. 213-216 ◽  
Author(s):  
Priya Subramaniam ◽  
KL Girish Babu ◽  
Sony Sugnani
Keyword(s):  
Cardiac Surgery ◽  
Case Report ◽  
Speech Therapy ◽  
Interdisciplinary Approach ◽  
Coarctation Of Aorta ◽  
Short Neck ◽  
Oral Rehabilitation ◽  
Rare Association ◽  
Neck Mobility

Klippel Feil Syndrome comprises of three characteristic deformities of short neck, a low dorsal hair line and restricted neck mobility. This is a case report of Klippel Feil Syndrome and its rare association with cleft of hard and soft palate, coarctation of aorta, dextrocardia and situs inversus. An interdisciplinary approach towards the management included cardiac surgery, cleft repair and complete oral rehabilitation of the patient. Presently the patient is undergoing speech therapy and is under regular follow up.

Sign in / Sign up

Export Citation Format

Share Document