scholarly journals Investigations on the Mechanical Properties of Natural Fiber Granulated Composite Using Hybrid Additive Manufacturing: A Novel Approach

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
R. Anandkumar ◽  
S. Ramesh Babu ◽  
Ravishankar Sathyamurthy
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Layer By Layer ◽  
Manufacturing Technique ◽  
Number Of Layers ◽  
Novel Approach ◽  
Deposition Modeling ◽  
Powdered Form

In this work, experiments on mechanical properties such as tensile, flexural, effects, and stiffness testing are performed on natural fiber granulated composites (NFGC) manufactured using a hybrid additive manufacturing technique. The natural fiber granulated composites are prepared using the powdered form of sugarcane, jute, ramie, banana, pineapple fiber, and seashell powder with a volume fraction of 0.8. In the hybrid additive manufacturing technique, the fused deposited modeling (FDM) machine is modified by combining with the shape deposition modeling (SDM) to print the specimens layer by layer, and the influence of the number of layers on the mechanical properties is analyzed. The results concluded that increasing the number of layers from 6 to 12 improved the mechanical properties such as tensile strength, flexural strength, impact strength, and hardness values by 40.84, 50.04, 21.55, and 20.55%, respectively. Further, a novel technique can be utilized for developing the composites in replacement with conventional methods.

scholarly journals EFFECT OF EXTRUSION PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF 3D PRINTED PLA PRODUCT

2021 ◽  
Vol 6 (2) ◽  
pp. 119
Author(s):  
Nanang Ali Sutisna ◽  
Rakha Amrillah Fattah
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Extrusion Process ◽  
Experimental Procedure ◽  
Fused Deposition ◽  
Novel Approach ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Digital Models

The method of producing items through synchronously depositing material level by level, based on 3D digital models, is named Additive Manufacturing (AM) or 3D-printing. Amongs many AM methods, the Fused Deposition Modeling (FDM) technique along with PLA (Polylactic acid) material is commonly used in additive manufacturing. Until now, the mechanical properties of the AM components could not be calculated or estimated until they've been assembled and checked. In this work, a novel approach is suggested as to how the extrusion process affects the mechanical properties of the printed component to obtain how the parts can be manufactured or printed to achieve improved mechanical properties. This methodology is based on an experimental procedure in which the combination of parameters to achieve an optimal from a manufacturing experiment and its value can be determined, the results obtained show the effect of the extrusion process affects the mechanical properties.

Control of humping phenomenon and analyzing mechanical properties of Al–Si wire-arc additive manufacturing fabricated samples using cold metal transfer process

2021 ◽  
pp. 095440622199840
Author(s):  
Yashwant Koli ◽  
N Yuvaraj ◽  
Aravindan Sivanandam ◽  
Vipin
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Heat Input ◽  
Large Scale ◽  
High Deposition Rate ◽  
Bead Geometry ◽  
Layer By Layer ◽  
Cold Metal Transfer ◽  
Geometrical Shapes ◽  
Wire Arc Additive Manufacturing

Nowadays, rapid prototyping is an emerging trend that is followed by industries and auto sector on a large scale which produces intricate geometrical shapes for industrial applications. The wire arc additive manufacturing (WAAM) technique produces large scale industrial products which having intricate geometrical shapes, which is fabricated by layer by layer metal deposition. In this paper, the CMT technique is used to fabricate single-walled WAAM samples. CMT has a high deposition rate, lower thermal heat input and high cladding efficiency characteristics. Humping is a common defect encountered in the WAAM method which not only deteriorates the bead geometry/weld aesthetics but also limits the positional capability in the process. Humping defect also plays a vital role in the reduction of hardness and tensile strength of the fabricated WAAM sample. The humping defect can be controlled by using low heat input parameters which ultimately improves the mechanical properties of WAAM samples. Two types of path planning directions namely uni-directional and bi-directional are adopted in this paper. Results show that the optimum WAAM sample can be achieved by adopting a bi-directional strategy and operating with lower heat input process parameters. This avoids both material wastage and humping defect of the fabricated samples.

Carbon Nanotube Reinforced Fused Deposition Modeling Using Microwave Irradiation

2016 ◽  
Author(s):  
Meng Zhang ◽  
Xiaoxu Song ◽  
Weston Grove ◽  
Emmett Hull ◽  
Z. J. Pei ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Additive Manufacturing ◽  
Microwave Irradiation ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Sem Images ◽  
Fused Deposition ◽  
Deposition Modeling

Additive manufacturing (AM) is a class of manufacturing processes where material is deposited in a layer-by-layer fashion to fabricate a three-dimensional part directly from a computer-aided design model. With a current market share of 44%, thermoplastic-based additive manufacturing such as fused deposition modeling (FDM) is a prevailing technology. A key challenge for AM parts (especially for parts made by FDM) in engineering applications is the weak inter-layer adhesion. The lack of bonding between filaments usually results in delamination and mechanical failure. To address this challenge, this study embedded carbon nanotubes into acrylonitrile butadiene styrene (ABS) thermoplastics via a filament extrusion process. The vigorous response of carbon nanotubes to microwave irradiation, leading to the release of a large amount of heat, is used to melt the ABS thermoplastic matrix adjacent to carbon nanotubes within a very short time period. This treatment is found to enhance the inter-layer adhesion without bulk heating to deform the 3D printed parts. Tensile and flexural tests were performed to evaluation the effects of microwave irradiation on mechanical properties of the specimens made by FDM. Scanning electron microscopic (SEM) images were taken to characterize the fracture surfaces of tensile test specimens. The actual carbon nanotube contents in the filaments were measured by conducting thermogravimetric analysis (TGA). The effects of microwave irradiation on the electrical resistivity of the filament were also reported.

Assessing of Mechanical Properties of Natural Fiber Reinforced Polymer Matrix Hybrid Composites

2015 ◽  
Vol 766-767 ◽  
pp. 199-204 ◽  
Author(s):  
Kumar Jayachandran Nirmal ◽  
D. Premkumar
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Natural Fibres ◽  
Fiber Reinforced Polymer ◽  
Resin Matrix ◽  
Reinforced Polymer ◽  
Individual Type

An experimental analysis has been carried out to investigate the mechanical properties of composites reinforced by sisal, coir, and banana fibres into epoxy resin matrix. The natural fibres were extracted by retting and manual processes. The composites fabricated by epoxy resin and reinforcement in the hybrid combination of Sisal-Banana and Sisal-Coir with the volume fraction of fibres varying from 5% to 30%. It has been identified that the mechanical properties increase with the increase of volume fraction of fibres to a certain extent and then decreases. The hybridization of the reinforcement in the composite shows greater mechanical properties when compared to individual type of natural fibres reinforced. For all the composites tested, the tensile strength of the composite increased up to 25% of volume fraction of the fibres and further for the increase in the volume fraction of fibre the mechanical properties were decreased. As same as tensile properties, the flexural and impact strength also increased linearly up to 25% of volume fraction of fibres and further for the increase in the volume fraction of fibre the mechanical properties were slightly decreased. Key Words: Sisal, Banana, Coir, Epoxy, Hybrid composite.

Printing of Microscale Nanotwinned Copper Interconnections Using Localized Pulsed Electrodeposition (L-PED)

2018 ◽  
Author(s):  
Ali Behroozfar ◽  
Soheil Daryadel ◽  
S. Reza Morsali ◽  
Rodrigo A. Bernal ◽  
Majid Minary-Jolandan
Keyword(s):  
Mechanical Properties ◽  
Electrical Resistivity ◽  
Additive Manufacturing ◽  
High Resistance ◽  
Environmental Conditions ◽  
Coarse Grained ◽  
Post Processing ◽  
Manufacturing Technique ◽  
Conductive Substrate ◽  
Pulsed Electrodeposition

Nanotwinned (nt) metals exhibit superior electrical and mechanical properties compared to their coarse-grained and nano-grained counterparts. They have a unique microstructure with grains that contain layered nanoscale twins divided by coherent twin boundaries (TBs). Since nanotwinned metals have low electrical resistivity and high resistance to electromigration, they are ideal materials for making nanowires, interconnections and switches. In this paper we show the possibility of making nanotwinned copper interconnections on a non-conductive substrate using a novel additive manufacturing technique called L-PED. Through this approach, microscale interconnections can be directly printed on the substrate in environmental conditions and without post processing.

scholarly journals Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 672 ◽  
Author(s):  
Elena Verdejo de Toro ◽  
Juana Coello Sobrino ◽  
Alberto Martínez Martínez ◽  
Valentín Miguel Eguía ◽  
Jorge Ayllón Pérez
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Injection Moulding ◽  
New Technologies ◽  
Mechanical Response ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Polymer Injection ◽  
Fused Deposition

New technologies are offering progressively more effective alternatives to traditional ones. Additive Manufacturing (AM) is gaining importance in fields related to design, manufacturing, engineering and medicine, especially in applications which require complex geometries. Fused Deposition Modelling (FDM) is framed within AM as a technology in which, due to their layer-by-layer deposition, thermoplastic polymers are used for manufacturing parts with a high degree of accuracy and minimum material waste during the process. The traditional technology corresponding to FDM is Polymer Injection Moulding, in which polymeric pellets are injected by pressure into a mould using the required geometry. The increasing use of PA6 in Additive Manufacturing makes it necessary to study the possibility of replacing certain parts manufactured by injection moulding with those created using FDM. In this work, PA6 was selected due to its higher mechanical properties in comparison with PA12. Moreover, its higher melting point has been a limitation for 3D printing technology, and a further study of composites made of PA6 using 3D printing processes is needed. Nevertheless, analysis of the mechanical response of standardised samples and the influence of the manufacturing process on the polyamide’s mechanical properties needs to be carried out. In this work, a comparative study between the two processes was conducted, and conclusions were drawn from an engineering perspective.

Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites

2019 ◽  
Vol 28 (4) ◽  
pp. 273-284
Author(s):  
Jai Inder Preet Singh ◽  
Sehijpal Singh ◽  
Vikas Dhawan
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Fiber Volume Fraction ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Matrix Material ◽  
Research Work ◽  
Curing Temperature ◽  
Green Composites ◽  
Fiber Volume

Rising environmental concerns and depletion of petrochemical resources have resulted in an increased interest in biodegradable natural fiber-reinforced polymer composites. In this research work, jute fiber has been used as a reinforcement and polylactic acid (PLA) as the matrix material to develop jute/PLA green composites with the help of compression molding technique. The effect of fiber volume fraction ranging from 25% to 50% and curing temperature ranging from 160°C to 180°C on different samples were investigated for mechanical properties and water absorption. Results obtained from various tests indicate that with an increase in the fiber volume fraction, tensile and flexural strength increases till 30% fiber fraction, thereafter decreases with further increase in fiber content. Maximum tensile and flexural strength of jute/PLA composites was obtained with 30% fiber volume fraction at 160°C curing temperature. The trend obtained from mechanical properties is further justified through the study of surface morphology using scanning electron microscopy.

Influence of Built Orientation on Mechanical Properties in Fused Deposition Modeling

2014 ◽  
Vol 592-594 ◽  
pp. 400-404 ◽  
Author(s):  
Sandeep V. Raut ◽  
Vijaykumar S. Jatti ◽  
T.P. Singh
Keyword(s):  
Mechanical Properties ◽  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Polymer Materials ◽  
Manufacturing Cost ◽  
Layer By Layer ◽  
Total Cost ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Main Material

Fused deposition modeling (FDM) is one of the thirty techniques of rapid prototyping methods that produce prototypes from polymer materials (natural or with different grades). Acrylonitrile butadiene styrene (ABS) is one of the good material among all polymer materials. It is used in the layer by layer manufacturing of the prototype which is in the semi-molten plastic filament form and built up on the platform from bottom to top. In FDM, one of the critical factor is to select the built up orientation of the model since it affects the different areas of the model like main material, support material, built up time, total cost per part and most important the mechanical properties of the part. In view of this, objective of the present study was to investigate the effect of the built-up orientation on the mechanical properties and total cost of the FDM parts. Experiments were carried out on STRATASYS FDM type rapid prototyping machine coupled with CATALYST software and ABS as main material. Tensile and Impact specimens were prepared as per the ASTM standard with different built-up orientation and in three geometrical axes. It can be concluded from the experimental analysis that built orientation has significant affect on the tensile, impact and total cost of the FDM parts. These conclusions will help the design engineers to decide on proper build orientation, so that FDM parts can be fabricated with good mechanical properties at minimum manufacturing cost.

scholarly journals Experimental Investigation on Mechanical Properties of Part Fabricated by Wire Arc Additive Manufacturing Process

2021 ◽  
Author(s):  
Vivek Kumar P ◽  
◽  
Soundrapandian E ◽  
Jenin Joseph A ◽  
Kanagarajan E ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Three Dimensional ◽  
Casting Process ◽  
Significant Rise ◽  
Layer By Layer ◽  
Cnc Machine ◽  
Hardness Tester ◽  
Wire Arc Additive Manufacturing

Additive manufacturing process is a method of layer by layer joining of materials to create components from three-dimensional (3D) model data. After their introduction in the automotive sector a decade ago, it has seen a significant rise in research and growth. The Additive manufacturing is classified into different types based upon the energy source use in the fabrication process. In our project, we used self-build CNC machine that runs MACH3 software, as well as the MACH3 controller is used to control the welding torch motion for material addition through three axis movement (X, Y and Z). In the project we used ER70 S-6 weld wire for the fabrication and examined its microstructure and mechanical properties. Different layers of the specimen had different microstructures, according to microstructural studies of the product. Rockwell hardness tester used for testing hardness of the product. According to the observation of the part fabricated components using the Wire Arc Additive Manufacturing process outperformed the mechanical properties of mild steel casting process. The product fabricated by Wire Arc Additive Manufacturing process properties is superior to conventional casting process.

Sign in / Sign up

Export Citation Format

Share Document