scholarly journals Study on the Water Invasion and Its Effect on the Production from Multilayer Unconsolidated Sandstone Gas Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Yong Hu ◽  
Xizhe Li ◽  
Weijun Shen ◽  
Changmin Guo ◽  
Chunyan Jiao ◽  
...  
Keyword(s):  
Production Rate ◽  
Economic Cost ◽  
Gas Production ◽  
Economic Life ◽  
High Permeability ◽  
Gas Wells ◽  
Gas Reservoirs ◽  
Reservoir Properties ◽  
High Production Rate ◽  
Major Factors

Water invasion is a common occurrence in multilayer unconsolidated gas reservoirs, which results in excessive water production and reduces the economic life of gas wells. However, due to multiple layers, active edge water, and strong heterogeneity, the mechanism of water invasion and its effect in the unconsolidated sandstone gas reservoir require understanding in order to improve efficiency and minimize economic cost. In this study, an experimental study on edge water invasion of the multilayer commingled production in unconsolidated sandstone gas reservoirs was conducted to understand the water invasion process along with different permeability layers. The results show that the edge water invasion in the commingling production is mainly affected by two major factors including reservoir permeability and gas production rate, which jointly control the encroaching water advance path and speed. The nonuniform invade of edge water may occur easily and water prefers to invade toward the gas well along with high permeability layers when the commingling production is in the condition of large permeability gradient and high production rate. The bypass flow will occur when there are high permeability channels between the layers, which causes water blocking to low-permeability layers and periphery reservoirs far away from gas wells. The findings of this study can help for a better understanding of water invasion and the effects of reservoir properties so as to optimize extraction conditions and predict gas productivity in unconsolidated sandstone gas reservoirs.

scholarly journals Multiphysics coupling study of near-wellbore and reservoir models in ultra-deep natural gas reservoirs

2022 ◽  
Author(s):  
Pengda Cheng ◽  
Weijun Shen ◽  
Qingyan Xu ◽  
Xiaobing Lu ◽  
Chao Qian ◽  
...  
Keyword(s):  
Natural Gas ◽  
Pore Pressure ◽  
Production Rate ◽  
Gas Production ◽  
Permeability Evolution ◽  
Gas Reservoirs ◽  
Reservoir Properties ◽  
Gas Field ◽  
Natural Gas Reservoirs ◽  
Stress Dependent

AbstractUnderstanding the changes of the near-wellbore pore pressure associated with the reservoir depletion is greatly significant for the development of ultra-deep natural gas reservoirs. However, there is still a great challenge for the fluid flow and geomechanics in the reservoir depletion. In this study, a fully coupled model was developed to simulate the near-wellbore and reservoir physics caused by pore pressure in ultra-deep natural gas reservoirs. The stress-dependent porosity and permeability models as well as geomechanics deformation induced by pore pressure were considered in this model, and the COMSOL Multiphysics was used to implement and solve the problem. The numerical model was validated by the reservoir depletion from Dabei gas field in China, and the effects of reservoir properties and production parameters on gas production, near-wellbore pore pressure and permeability evolution were discussed. The results show that the gas production rate increases nonlinearly with the increase in porosity, permeability and Young’s modulus. The lower reservoir porosity will result in the greater near-wellbore pore pressure and the larger rock deformation. The permeability changes have little effect on geomechanics deformation while it affects greatly the gas production rate in the reservoir depletion. With the increase in the gas production rate, the near-wellbore pore pressure and permeability decrease rapidly and tend to balance with time. The reservoir rocks with higher deformation capacity will cause the greater near-wellbore pore pressure.

scholarly journals Influence of Pore Structure and Solid Bitumen on the Development of Deep Carbonate Gas Reservoirs: A Case Study of the Longwangmiao Reservoir in Gaoshiti–Longnusi Area, Sichuan Basin, SW China

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3825
Author(s):  
Jianxun Chen ◽  
Shenglai Yang ◽  
Dongfan Yang ◽  
Hui Deng ◽  
Jiajun Li ◽  
...  
Keyword(s):  
Pore Structure ◽  
Production Rate ◽  
Gas Flow ◽  
Loss Rate ◽  
Sedimentary Environment ◽  
Gas Production ◽  
Accumulation Process ◽  
High Permeability ◽  
Gas Reservoirs ◽  
Solid Bitumen

A variable sedimentary environment and accumulation process leads to a complex pore structure in deep carbonate gas reservoirs, and the physical properties are quite different between layers. Moreover, some pores and throats are filled with solid bitumen (SB), which not only interferes with reservoir analysis, but also affects efficient development. However, previous studies on SB mainly focused on the accumulation process and reservoir analysis, and there are few reports about the influence on development. In this paper, through scanning electron microscope analysis, SB extraction, gas flow experiments and depletion experiments, and a similar transformation between experimental results and reservoir production, the production characteristics of carbonate gas reservoirs with different pore structures were studied, and the influence of SB on pore structure, reservoir analysis and development were systematically analyzed. The results show that permeability is one of the key factors affecting gas production rate and recovery, and the production is mainly contributed by high-permeability layers. Although the reserves are abundant, the gas production rate and recovery of layers with a low permeability are relatively low. The SB reduces the pore and throat radius, resulting in porosity and permeability being decreased by 4.73–6.28% and 36.02–3.70%, respectively. With the increase in original permeability, the permeability loss rate decreases. During development, the loss rate of gas production rate is much higher than that of permeability. Increasing the production pressure difference is conducive to reducing the influence. SB also reduces the recovery, which leads to the loss rate of gas production being much higher than that of porosity. For reservoirs with a high permeability, the loss rates of gas production rate and the amount produced are close to those of permeability and porosity. Therefore, in the reservoir analysis and development of carbonate gas reservoirs bearing SB, it is necessary and significant to analyze the influence of reservoir types.

Numerical Investigation on Multiphase Erosion-Corrosion Problem of Steel of Apparatus at a Well Outlet in Natural Gas Production

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Zhang Jianwen ◽  
Jiang Aiguo ◽  
Xin Yanan ◽  
He Jianyun
Keyword(s):  
Fluid Flow ◽  
Natural Gas ◽  
Production Rate ◽  
Gas Production ◽  
Two Phase ◽  
Gas Well ◽  
Chemical Corrosion ◽  
High Production Rate ◽  
Erosion Corrosion ◽  
Corrosion Problem

The erosion-corrosion problem of gas well pipeline under gas–liquid two-phase fluid flow is crucial for the natural gas well production, where multiphase transport phenomena expose great influences on the feature of erosion-corrosion. A Eulerian–Eulerian two-fluid flow model is applied to deal with the three-dimensional gas–liquid two-phase erosion-corrosion problem and the chemical corrosion effects of the liquid droplets dissolved with CO2 on the wall are taken into consideration. The amount of erosion and chemical corrosion is predicted. The erosion-corrosion feature at different parts including expansion, contraction, step, screw sections, and bends along the well pipeline is numerically studied in detail. For dilute droplet flow, the interaction between flexible water droplets and pipeline walls under different operations is treated by different correlations according to the liquid droplet Reynolds numbers. An erosion-corrosion model is set up to address the local corrosion and erosion induced by the droplets impinging on the pipe surfaces. Three typical cases are studied and the mechanism of erosion-corrosion for different positions is investigated. It is explored by the numerical simulation that the erosion-corrosion changes with the practical production conditions: Under lower production rate, chemical corrosion is the main cause for erosion-corrosion; under higher production rate, erosion predominates greatly; and under very high production rate, erosion becomes the main cause. It is clarified that the parts including connection site of oil pipe, oil pipe set, and valve are the places where erosion-corrosion origins and becomes serious. The failure mechanism is explored and good comparison with field measurement is achieved.

Technology Focus: Unconventional and Tight Reservoirs (July 2021)

2021 ◽  
Vol 73 (07) ◽  
pp. 57-57
Author(s):  
Leonard Kalfayan
Keyword(s):  
Oil And Gas ◽  
Gas Production ◽  
Alternative Methods ◽  
Gas Wells ◽  
Gas Reservoirs ◽  
Liquid Loading ◽  
Well Production ◽  
Tight Carbonate ◽  
Water Blocking ◽  
Tight Reservoirs

As unconventional oil and gas fields mature, operators and service providers are looking toward, and collaborating on, creative and alternative methods for enhancing production from existing wells, especially in the absence of, or at least the reduction of, new well activity. While oil and gas price environments remain uncertain, recent price-improvement trends are supporting greater field testing and implementation of innovative applications, albeit with caution and with cost savings in mind. Not only is cost-effectiveness a requirement, but cost-reducing applications and solutions can be, too. Of particular interest are applications addressing challenging well-production needs such as reducing or eliminating liquid loading in gas wells; restimulating existing, underperforming wells, including as an alternative to new well drilling and completion; and remediating water blocking and condensate buildup, both of which can impair production from gas wells severely. The three papers featured this month represent a variety of applications relevant to these particular well-production needs. The first paper presents a technology and method for liquid removal to improve gas production and reserves recovery in unconventional, liquid-rich reservoirs using subsurface wet-gas compression. Liquid loading, a recurring issue downhole, can severely reduce gas production and be costly to remediate repeatedly, which can be required. This paper discusses the full technology application process and the supportive results of the first field trial conducted in an unconventional shale gas well. The second paper discusses the application of the fishbone stimulation system and technique in a tight carbonate oil-bearing formation. Fishbone stimulation has been around for several years now, but its best applications and potential have not necessarily been fully understood in the well-stimulation community. This paper summarizes a successful pilot application resulting in a multifold increase in oil-production rate and walks the reader through the details of the pilot candidate selection, completion design, operational challenges, and lessons learned. The third paper introduces and proposes a chemical treatment to alleviate phase trapping in tight carbonate gas reservoirs. Phase trapping can be in the form of water blocking or increasing condensate buildup from near the wellbore and extending deeper into the formation over time. Both can reduce relative permeability to gas severely. Water blocks can be a one-time occurrence from drilling, completion, workover, or stimulation operations and can often be treated effectively with solvent plus proper additive solutions. Similar treatments for condensate banking in gas wells, however, can provide only temporary alleviation, if they are even effective. This paper proposes a technique for longer-term remediation of phase trapping in tight carbonate gas reservoirs using a unique, slowly reactive fluid system. Recommended additional reading at OnePetro: www.onepetro.org. SPE 200345 - Insights Into Field Application of Enhanced-Oil-Recovery Techniques From Modeling of Tight Reservoirs With Complex High-Density Fracture Network by Geng Niu, CGG, et al. SPE 201413 - Diagnostic Fracture Injection Test Analysis and Simulation: A Utica Shale Field Study by Jeffery Hildebrand, The University of Texas at Austin, et al.

Acid Fracturing of Deep Gas Wells Using a Surfactant-Based Acid: Long-Term Effects on Gas Production Rate

2006 ◽  
Author(s):  
Hisham A. Nasr-El-Din ◽  
Saad M. Al-Driweesh ◽  
Kirk Michael Bartko ◽  
Hamed Hasan Al-Ghadhban ◽  
Venkateshwaran Ramanathan ◽  
...  
Keyword(s):  
Production Rate ◽  
Gas Production ◽  
Long Term Effects ◽  
Gas Wells ◽  
Acid Fracturing

scholarly journals Rate Decline Analysis for Limited-Entry Well in Abnormally High-Pressured Composite Naturally Fractured Gas Reservoirs

2019 ◽  
Vol 9 (9) ◽  
pp. 1821
Author(s):  
Mingtao Wu ◽  
Xiaodong Wang ◽  
Wenqi Zhao ◽  
Lun Zhao ◽  
Meng Sun ◽  
...  
Keyword(s):  
Production Rate ◽  
High Efficiency ◽  
Negative Impact ◽  
Gas Production ◽  
Production Performance ◽  
Gas Reservoirs ◽  
Naturally Fractured ◽  
Limited Entry ◽  
Permeability Anisotropy ◽  
Stress Dependent

Most naturally fractured gas reservoirs in China exhibit strongly heterogeneous, abnormally high-pressured and, stress-sensitive behaviors. In this work, a semianalytical solution is developed to study the production performance for limited-entry well in composite naturally fractured formations. The pressure-dependent porosity and permeability, anisotropy and limited-entry characteristics are taken into consideration. Furthermore, conventional Warren-Root model is amended to accommodate for permeability anisotropy. Laplace and finite Fourier cosine transforms are used to solve the diffusivity equations. The model is verified on the basis of previous literature’s results and data of a field example from Moxi gas field in Southwest China. Through the parameters sensitivity analysis, the effects of prevailing factors on production performance are investigated. Results indicate that a large inner region radius and high mobility ratio can improve gas production rate in the early stage, while they also lead to a drastic decline of production rate in the late stage. Large permeability stress-dependent coefficient and low penetrated interval both have a negative impact on production rate. With its high efficiency and simplicity, this proposed approach can serve as a convenient tool to evaluate the behavior of partially penetrated production well in abnormally high-pressured composite naturally fractured gas reservoirs.

Analysis of Fractured Sections in Shale Gas Wells Based on PCA - Logistic Regression Model

2020 ◽  
Vol 980 ◽  
pp. 483-492
Author(s):  
Lei Ji ◽  
Ju Hua Li ◽  
Guan Qun Li ◽  
Jia Lin Xiao ◽  
Sean Unrau
Keyword(s):  
Logistic Regression ◽  
Shale Gas ◽  
Logistic Regression Model ◽  
Gas Production ◽  
Gas Wells ◽  
Gas Reservoirs ◽  
Discriminant Model ◽  
Economic Exploitation ◽  
High Production ◽  
Pca Algorithm

In order to optimize the layout and economic exploitation of horizontal fracturing wells and completion in shale gas reservoirs, we propose a model for evaluating shale gas fractured sections based on an improved principle component analysis (PCA) algorithm with logistic regression. The 229 gas production sections in 22 fractured shale gas wells in the main block of the Fuling Shale Development Demonstration Zone were selected, and PCA is used for dimensionalite reduction. According to the PCA results, 6 key parameters are chosen to determine the productivity of fractured wells. Taking the probability distribution of high production after fracturing as the research objective, a logistic regression discriminant model was constructed using the dichotomy method. The prediction results show that the model has 82.1% accuracy and is reliable. The model can be used to classify and gas wells to be fractured, and it provides guiding significance for reasonable optimization of well sections in the area selected for fracturing.

Experimental Study on Gas Hydrates Dissociation in Sands by Depressurization

2013 ◽  
Vol 690-693 ◽  
pp. 3557-3560
Author(s):  
Jian Ye Sun ◽  
Yu Guang Ye ◽  
Chang Ling Liu ◽  
Jian Zhang
Keyword(s):  
Experimental Study ◽  
Production Rate ◽  
Gas Hydrates ◽  
Decomposition Rate ◽  
Gas Production ◽  
Decomposition Process ◽  
Experimental Apparatus ◽  
Three Stages ◽  
Major Factors

Depressurization method is a more potential way for gas production from gas hydrates. The behavior of gas hydrates dissociation by depressurization method is observed by the use of an experimental apparatus. The hydrates saturation is tracked by TDR during hydrates decomposition. The decomposition process consist three stages: fast dissociation, stable dissociation and the end. Significantly one of major factors that determine gas production rate by depressurization: degree of depressurization is discussed. t1/2 is used to characterize the hydrates decomposition rate. The greater of degree of depressurization is the faster of the hydrates decomposition rate gets.

Sign in / Sign up

Export Citation Format

Share Document