scholarly journals Gas Jet Coal-Breaking Behavior: An Elliptical Crushing Theoretical Model

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Gongda Wang ◽  
Yuanyuan Wang ◽  
Xin Yang ◽  
Xin Song

Coalbed methane (CBM) is a source of clean energy and has been recovered in past decades all over the world. Gas dynamic disaster is the primary disaster in outburst coal, and methane drainage plays a key role in eliminating this danger. As an efficient technology, a gas jet is widely used in CBM development and methane drainage. In this work, the full impinging process of coal and rock fracturing by a supersonic gas jet was studied. To understand how jet parameters affect coal and rock fracturing results, an elliptical crushing theoretical model was proposed. In addition, a laboratory experiment was designed to examine the proposed model, and four key parameters affecting the fracturing results were studied. The results show that different from the monotonic variation of theoretical values, there is a turning point in the variation of experimental values under some parameters. Considering the influence of the depth and radius of the erosion pit, the rock-breaking effect is better when the nozzle size is 2.75 Ma. The optimal target distance is 30 mm, and the impact pressure of a gas jet should be continuously increased in order to achieve certain rock-breaking effects under the impact of the jet.

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2647
Author(s):  
Gang Wang ◽  
Cheng Fan ◽  
Hao Xu ◽  
Xuelin Liu ◽  
Rui Wang

Accurately determining the height of the gas-guiding fracture zone in the overlying strata of the goaf is the key to find the height of the long horizontal borehole in the roof. In order to determine the height, in this study we chose the 6306 working face of Tangkou Coal Mine in China as a research example and used both the theoretical model and discrete element method (DEM) numerical simulation to find the height of the gas-guiding fracture zone and applied the height to drill a long horizontal borehole in the roof of the 6303 working face. Furthermore, the borehole was utilized to deep into the roof for coalbed methane drainage and the results were compared with conventional gas drainage measures from other aspects. The height of the gas-guiding fracture zone was found to be 48.57 m in theoretical model based on the bulk coefficient and the void ratio and to be 51.19 m in the DEM numerical simulation according to the temporal and spatial variation characteristics of porosity. Taking both the results of theoretical analysis and numerical simulation into consideration, we determined that gas-guiding fracture zone is 49.88 m high and applied it to drill a long horizontal borehole deep into the roof in the 6303 working face field. Compared with conventional gas drainage measures, we found that the long horizontal borehole has the high stability, high efficiency and strong adaptability for methane drainage.


2016 ◽  
Vol 36 ◽  
pp. 1312-1325 ◽  
Author(s):  
Yingke Liu ◽  
Sihua Shao ◽  
Xinxin Wang ◽  
Lipeng Chang ◽  
Guanglei Cui ◽  
...  

2014 ◽  
pp. 88-117 ◽  
Author(s):  
G. Syunyaev ◽  
L. Polishchuk

We study the impact of Russian regional governors’ rotation and their affiliation with private sector firms for the quality of investment climate in Russian regions. A theoretical model presented in the paper predicts that these factors taken together improve “endogenous” property rights under authoritarian regimes. This conclusion is confirmed empirically by using Russian regional data for 2002—2010; early in that period gubernatorial elections had been canceled and replaced by federal government’s appointments. This is an indication that under certain conditions government rotation is beneficial for economic development even when democracy is suppressed.


Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 128
Author(s):  
Justyna Swolkień ◽  
Nikodem Szlązak

Several natural threats characterize hard coal mining in Poland. The coexistence of methane and rock-burst hazards lowers the safety level during exploration. The most dangerous are high-energy bumps, which might cause rock-burst. Additionally, created during exploitation, safety pillars, which protect openings, might be the reason for the formation of so-called gas traps. In this part, rock mass is usually not disturbed and methane in seams that form the safety pillars is not dangerous as long as they remain intact. Nevertheless, during a rock-burst, a sudden methane outflow can occur. Preventing the existing hazards increases mining costs, and employing inadequate measures threatens the employees’ lives and limbs. Using two longwalls as examples, the authors discuss the consequences of the two natural hazards’ coexistence. In the area of longwall H-4 in seam 409/4, a rock-burst caused a release of approximately 545,000 cubic meters of methane into the excavations, which tripled methane concentration compared to the values from the period preceding the burst. In the second longwall (IV in seam 703/1), a bump was followed by a rock-burst, which reduced the amount of air flowing through the excavation by 30 percent compared to the airflow before, and methane release rose by 60 percent. The analyses presented in this article justify that research is needed to create and implement innovative methods of methane drainage from coal seams to capture methane more effectively at the stage of mining.


2015 ◽  
Vol 8 (1) ◽  
pp. 19-72 ◽  
Author(s):  
Kanika Mahajan

Purpose – The purpose of this paper is to examine the impact of National Rural Employment Guarantee Scheme (NREGS) on farm sector wage rate. This identification strategy rests on the assumption that all districts across India would have had similar wage trends in the absence of the program. The author argues that this assumption may not be true due to non-random allocation of districts to the program’s three phases across states and different economic growth paths of the states post the implementation of NREGS. Design/methodology/approach – To control for overall macroeconomic trends, the author allows for state-level time fixed effects to capture the differences in growth trajectories across districts due to changing economic landscape in the parent-state over time. The author also estimates the expected farm sector wage growth due to the increased public work employment provision using a theoretical model. Findings – The results, contrary to the existing studies, do not find support for a significantly positive impact of NREGS treatment on private cultivation wage rate. The theoretical model also shows that an increase in public employment work days explains very little of the total growth in cultivation wage post 2004. Originality/value – This paper looks specifically at farm sector wage growth and the possible impact of NREGS on it, accounting for state specific factors in shaping farm wages. Theoretical estimates are presented to overcome econometric limitations.


2008 ◽  
Vol 277 ◽  
pp. 119-124 ◽  
Author(s):  
Ü. Ugaste ◽  
J. Priimets ◽  
Tony Laas

The impact of thermodynamic factors on deviation from linearity of diffusion path in the ternary system Cu-Fe-Ni is analyzed. For that the slope function of the diffusion path for the diffusion couples 65Ni30Cu5Fe –29.5Ni16.5Cu54Fe, 49.5Ni50.5Fe – 51Ni49Cu and 84Cu16Ni – 50Ni50Fe, annealed at 1000°C for 196h, were calculated by an approximate equation using only thermodynamic data. Results of the calculation were compared with the values of the slope function obtained directly from experimental data. It is shown that despite of the fact that the tracer diffusion coefficients of the components in the system Cu-Fe-Ni are not equal the coincidence between the calculated and experimental values of the slope function is remarkable. This allows us to conclude that at least in this case the deviation of the diffusion path from linearity depends mainly on the thermodynamic properties of the system.


1998 ◽  
Vol 1 (06) ◽  
pp. 489-495 ◽  
Author(s):  
Tommy Warren ◽  
Jim Powers ◽  
David Bode ◽  
Eric Carre ◽  
Lee Smith

This paper (SPE 52993) was revised for publication from paper SPE 36536, first presented at the 1996 SPE Annual Technical Conference and Exhibition, Denver, 6-9 October. Original manuscript received for review 11 October 1996. Revised manuscript received 22 September 1998. Paper peer approved 23 September 1998. Summary A Wireline retrievable coring system for use with conventional drilling equipment is described. The coring system was developed and tested for application in evaluating coalbed methane prospects where a large quantity of core is required, and it is essential that the core is processed soon after it is cut. A drill plug allows for alternation between coring and drilling without tripping the drillstring. The system is particularly advantageous for coring long intervals, multiple zones relatively close together, or when the exact target depth is unknown. The system has been used to core more than 4940 m (15,057 ft) in Poland, Germany, and France, with a combined core recovery of 94%. In addition, the impact of varying rig costs on total savings is factored into the overall economic evaluation of the system. P. 489


2016 ◽  
Vol 30 (02) ◽  
pp. 1550268 ◽  
Author(s):  
Jinwei Shi ◽  
Xingbai Luo ◽  
Jinming Li ◽  
Jianwei Jiang

To analyze the process of jet penetration in water medium quantitatively, the properties of jet penetration spaced target with water interlayer were studied through test and numerical simulation. Two theoretical models of jet penetration in water were proposed. The theoretical model 1 was established considering the impact of the shock wave, combined with the shock equation Rankine–Hugoniot and the virtual origin calculation method. The theoretical model 2 was obtained by fitting theoretical analysis and numerical simulation results. The effectiveness and universality of the two theoretical models were compared through the numerical simulation results. Both the models can reflect the relationship between the penetration velocity and the penetration distance in water well, and both the deviation and stability of theoretical model 1 are better than 2, the lower penetration velocity, and the larger deviation of the theoretical model 2. Therefore, the theoretical model 1 can reflect the properties of jet penetration in water effectively, and provide the reference of model simulation and theoretical research.


Significance The extreme cold comes as the province is still dealing with the damage caused by unprecedented levels of heat and wildfires last summer and then record levels of rainfall and flooding in November. Its experience has focused attention on Canada’s wider vulnerability to the impact of shifting weather patterns and climate change. Impacts The natural resource sectors that are vital to Canada’s economy face an increasingly difficult environment for extraction. Indigenous peoples across the country will see their traditional ways of life further disrupted by climate change. The increasingly evident impacts of climate change on day-to-day life will see voters demand greater action from government. Significant investment in green initiatives, clean energy and climate resiliency initiatives will boost green industries.


Sign in / Sign up

Export Citation Format

Share Document