scholarly journals Online Simulation of Nuclear Power Plant Primary Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Hongyun Xie ◽  
Haixia Gu ◽  
Chao Lu ◽  
Jialin Ping
Keyword(s):  
Information System ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Real Time ◽  
Nuclear Power ◽  
Measurement Data ◽  
Reactor Core ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Online Simulation

Real-time Simulation (RTS) has long been used in the nuclear power industry for operator training and engineering purposes. And, online simulation (OLS) is based on RTS and with connection to the plant information system to acquire the measurement data in real time for calibrating the simulation models and following plant operation, for the purpose of analyzing plant events and providing indicative signs of malfunctioning. OLS has been applied in certain industries to improve safety and efficiency. However, it is new to the nuclear power industry. A research project was initiated to implement OLS to assist operators in certain critical nuclear power plant (NPP) operations to avoid faulty conditions. OLS models were developed to simulate the reactor core physics and reactor/steam generator thermal hydraulics in real time, with boundary conditions acquired from plant information system, synchronized in real time. The OLS models then were running in parallel with recorded plant events to validate the models, and the results are presented.

scholarly journals Social development of Russian nuclear power plant cities

2019 ◽  
pp. 20-30
Author(s):  
V. A. Lazarenko
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Social Development ◽  
Nuclear Power ◽  
Socioeconomic Development ◽  
Power Industry ◽  
Nuclear Power Industry ◽  
Historical Factors ◽  
Almost All ◽  
The City

The article presents the analysis of the influence of historical factors on the development of Russian cities of nuclear power industry and the genetic types of these cities. Most of these cities are young, their socioeconomic state depends on the city-forming enterprise. The formation and development of nuclear power plant (NPPs) cities went in two ways: the city was built in parallel with the nuclear power plant (e.g., Novovoronezh, Desnogorsk, Kurchatov); the NPP was built near the settlement, and then NPP has influenced on socioeconomic development of the settlement, its employment structure, etc. (Volgodonsk and Balakovo). In USSR/Russia practice, the first way dominated, when an urban-type settlement was built near a NPP, such settlement then intensively grew and developed into a city. There are three types of Russian cities with NPPs: the cities formed and developed before the construction of the NPP; the cities developed due to the operation of NPPs, and the cities created and developed due to the operation of NPPs. It was found that the factor of formation of nuclear power industry in the city is decisive in the social development of almost all cities of NPPs and affects their current state.

A High Effective Parallel Method for the Coupling Between Neutronics and Thermal-Hydraulic

2016 ◽  
Author(s):  
Xiaomeng Dong ◽  
Zhijian Zhang ◽  
Zhaofei Tian ◽  
Lei Li ◽  
Guangliang Chen
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Decisive Role ◽  
Reactor Power ◽  
Coupling Method ◽  
Outlet Temperature

Multi-physics coupling analysis is one of the most important fields among the analysis of nuclear power plant. The basis of multi-physics coupling is the coupling between neutronics and thermal-hydraulic because it plays a decisive role in the computation of reactor power, outlet temperature of the reactor core and pressure of vessel, which determines the economy and security of the nuclear power plant. This paper develops a coupling method which uses OPENFOAM and the REMARK code. OPENFOAM is a 3-dimension CFD open-source code for thermal-hydraulic, and the REMARK code (produced by GSE Systems) is a real-time simulation multi-group core model for neutronics while it solves diffusion equations. Additionally, a coupled computation using these two codes is new and has not been done. The method is tested and verified using data of the QINSHAN Phase II typical nuclear reactor which will have 16 × 121 elements. The coupled code has been modified to adapt unlimited CPUs after parallelization. With the further development and additional testing, this coupling method has the potential to extend to a more large-scale and accurate computation.

Study for Application of Safety Soft Control and Information System in Highly-Integrated Control Rooms of CPR1000 NPP

2013 ◽  
Author(s):  
Xuegang Zhang ◽  
Wei Liu ◽  
Hai Chang ◽  
Jianbo Wen ◽  
Yiqian Wu ◽  
...  
Keyword(s):  
Information System ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
System Design ◽  
Nuclear Power ◽  
Integrated Control ◽  
Continuous Control ◽  
Design Basis ◽  
Control Rooms ◽  
Soft Control

For most of the newly built nuclear power plants, the computerized main control rooms (MCR) are adopted. The soft control, the typical feature of computerized Human-Interface System (HIS) in the computerized main control room and mediated by software rather than by direct physical connections, is comprised of safety and non-safety control interface which provides the operators with manual control for component-level, and allows both continuous control of plant process and discrete control of components in nuclear power plant. The safety soft control and information system (SSCIS) is used to give the safety commands to and check the immediate response of the safety process. This paper describes the application of the system design basis, functionality, communication, operation faceplate and system modes for SSCIS which is firstly introduced in CPR1000 nuclear power plant. The design criteria and basic design features of SSCIS is developed to be as the design basis of the design implementation. The ISG-04 ‘Highly-Integrated Control Rooms-Communications issues (HICRc)’ provides acceptable methods for addressing SSCIS communications in digital I&C system design. The NUREG0700 ‘Human-System Interface Design Review Guidelines’ is applied as reference for human factor engineering requirement in the SSCIS design. And the SSCIS design has also fully considered the possible customer usual practice.

Root Cause of Thermal Sleeve Loosening in a Korean Standard Nuclear Power Plant

2006 ◽  
Author(s):  
Sang-Nyung Kim ◽  
Sang-Gyu Lim
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Measurement Data ◽  
Significant Loss ◽  
Design Modification ◽  
Root Cause ◽  
Explosive Expansion ◽  
The Impact

The safety injection (SI) nozzle of a 1000MWe-class Korean standard nuclear power plant (KSNP) is fitted with thermal sleeves (T/S) to alleviate thermal fatigue. Thermal sleeves in KSNP #3 & #4 in Yeonggwang (YG) & Ulchin (UC) are manufactured out of In-600 and fitted solidly without any problem, whereas KSNP #5 & #6 in the same nuclear power plants, also fitted with thermal sleeves made of In-690 for increased corrosion resistance, experienced a loosening of thermal sleeves in all reactors except KSNP YG #5-1A, resulting in significant loss of generation availability. An investigation into the cause of the loosening of the thermal sleeves only found out that the thermal sleeves were subject to severe vibration and rotation, failing to uncover the root cause and mechanism of the loosening. In an effort to identify the root cause of T/S loosening, three suspected causes were analyzed: (1) the impact force of flow on the T/S when the safety SI nozzle was in operation, (2) the differences between In-600 and In-690 in terms of physical and chemical properties (notably the thermal expansion coefficient), and (3) the positioning error after explosive expansion of the T/S as well as the asymmetric expansion of T/S. It was confirmed that none of the three suspected causes could be considered as the root cause. However, after reviewing design changes applied to the Palo Verde nuclear plant predating KSNP YG #3 & #4 to KSNP #5 & #6, it was realized that the second design modification (in terms of groove depth & material) had required an additional explosive energy by 150% in aggregate, but the amount of gunpowder and the explosive expansion method were the same as before, resulting in insufficient explosive force that led to poor thermal sleeve expansion. T/S measurement data and rubbing copies also support this conclusion. In addition, it is our judgment that the acceptance criteria applicable to T/S fitting was not strict enough, failing to single out thermal sleeves that were not expanded sufficiently. Furthermore, the T/S loosening was also attributable to lenient quality control before and after fitting the T/S that resulted in significant uncertainty. Lastly, in a flow-induced vibration test planned to account for the flow mechanism that had a direct impact upon the loosening of the thermal sleeves that were not fitted completely, it was discovered that the T/S loosening was attributable to RCS main flow. In addition, it was proven theoretically that the rotation of the T/S was induced by vibration.

The Analysis and Realization of Interpreter Language in Nuclear Industry

2014 ◽  
Vol 989-994 ◽  
pp. 2097-2100
Author(s):  
Zheng Zhang ◽  
Hai Bo He ◽  
Hao Liang Lu
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Semantic Analysis ◽  
Reactor Core ◽  
Nuclear Industry ◽  
Logical Language ◽  
Grammatical Analysis ◽  
Actual Operating ◽  
Comparison Results

In order to satisfy the calculation requirements of nuclear power plant operating in different conditions, the integration and combination of reactor core computation modules have been proposed. By writing logical language instructions, and then read by interpreter, the engineering designers can make grammatical analysis, lexical analysis, semantic analysis and information extraction. In Linux system environment, the interpreter can fulfill computational tasks based on the actual operating parameters of nuclear power plant. The comparison results indicate that the calculated results obtained by the interpreter language are correct. Therefore, it also demonstrates that the interpreter language is valid.

Sign in / Sign up

Export Citation Format

Share Document