scholarly journals Experimental Study on City Road Collapse under Vibrating Load

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Yuxiao Wang ◽  
Gang Shi ◽  
Xiaowei Tian ◽  
Chaoyue Li ◽  
Huanyu Cheng
Keyword(s):  
Dynamic Load ◽  
Static Load ◽  
Soil Layer ◽  
Formation Time ◽  
Traffic Load ◽  
Scale Model ◽  
The Road ◽  
Ultimate Failure ◽  
The Stability ◽  
Collapse Process

Underground pipeline seepage and traffic load are the important factors causing city road collapse. In this paper, eight groups of indoor scale model experiments are used to study the road collapse caused by pipeline seepage, taking into account the load type, pipeline buried depth, the distance between pipeline and loss channel, the relative position of pipeline and loss channel, and the formation time of loss channel. The results show that when the erosion channel was formed later, the underlying erosion cavity was ellipsoid, while the other erosion cavities were funnel shaped. When only the static load is applied, the time to reach the ultimate failure is longer than that when only dynamic load is applied. The smaller dynamic load can increase the stability of the soil above the seepage pipeline, while the larger dynamic load can accelerate the collapse process. With the formation time of the erosion channel increasing, the erosion void size is larger and the surface is easier to collapse. With the increase of the distance between the loss passage and the pipeline, the damage time of the road surface is also increased. The larger the thickness of the soil layer above the pipeline, the smaller the size of the underground cavity and the surface subsidence.

scholarly journals ANALISIS STABILITAS LERENG MENGGUNAKAN SOFTWARE PLAXIS 8.6 DENGAN DINDING PENAHAN TANAH (RETAINING WALL) (STUDI KASUS RUAS JALAN NASIONAL BANDA ACEH-MEDAN STA 83+135 GUNUNG SEULAWAH)

2018 ◽  
Vol 1 (3) ◽  
pp. 76-82
Author(s):  
Wihardi Wihardi ◽  
Munirwansyah Munirwansyah ◽  
Sofyan M. Saleh
Keyword(s):  
Slope Stability ◽  
Safety Factor ◽  
Retaining Wall ◽  
Road Construction ◽  
Local Area ◽  
Traffic Load ◽  
Road Infrastructure ◽  
The Road ◽  
The Stability ◽  
Banda Aceh

Road infrastructure is very important and is a key enabler for the economy. If the road infrastructure was damaged or had various problems such as sliding, the movement of goods and passengers will be hampered and delayed to the acceleration of development in the local area. The landslide and movement of groundwater is a problem that often occurs repeatedly on some streets. Therefore, it is necessary to study the strengthening of the slopes at the bottom of the road construction with retaining wall. This study aims to analyze slope stability by getting numbers Safety Factor (FK). The analysis is used to analyze the stability of slopesusing the finite element method with the help of software Plaids, The scope of this review includes the calculation of slope stability at the national road from Banda Aceh - Medan Sta. 83 + 185 Mount Selawah. The results of slope stability analysis on the existing condition by using Plaxis software at the point of a review is not safe (FK 1.25). Thus, it is done handling the retaining wall, installation of anchors. Based on the analysis of slope stability after being given the strengthening of the slopes with a retaining wall and the installation of anchors using Plaxis software under the influence of traffic load in an unsafe condition (FK 1.25). Then additional handling is done by changing the angle of the slope so that the value of the safety factor (FK) 1.25.

The Stability Control of Soft Soil Foundations of Urban Roads According to the Surface Subsidence Monitoring Data

2013 ◽  
Vol 859 ◽  
pp. 222-227
Author(s):  
Hong Jun Liu ◽  
Jin Hua Tan ◽  
Xue Wen Su ◽  
Hao Wu
Keyword(s):  
Soft Soil ◽  
Stability Control ◽  
Surface Subsidence ◽  
Monitoring Data ◽  
Research Results ◽  
The Road ◽  
Future Design ◽  
Left And Right ◽  
Soil Foundation ◽  
The Stability

Two typical monitoring sections are selected for obtaining the change law of the surface subsidence and the settlement after construction of soft soil foundations, and determining the reasonable unloading time. The research results show that the surface settlement rate is large during the filling stage, the rate decreases after the loading and gradually stabilized. The embankment midline settlement is larger than the settlement of the road shoulder which is concluded from the fact that the subsidence of the middle settlement plate is larger than those of the left and right plate. The surface subsidence rate is less than 5mm per month during the two month before unloading according to the data in the tables. The settlement after construction presumed from the middle plate is more significantly larger than that of left and right sides, hence, as the unloading basis of preloading drainage method in soft soil foundation treatment the settlement after construction which is calculated from the midline monitoring data of the road is appropriate. After 6 months the calculated post-construction settlements of the two sections are in the scope of the design requirement since they decrease with preloading time. The reliable basis is provided for the future design and construction of soft foundation in this area through the research results.

The Specific Characteristics of Shock and Blast Impacts on Construction Sites

2021 ◽  
pp. 81-88
Author(s):  
A.A. Komarov ◽  
Keyword(s):  
Dynamic Load ◽  
Static Load ◽  
Dynamic Loads ◽  
Potential Hazard ◽  
Construction Sites ◽  
Static Loads ◽  
Equivalent Static Loads ◽  
Plane Crash ◽  
Nuclear Plants ◽  
The Impact

The practices of hazardous and unique facilities’ construction imply that specific attention is paid to the issues of safety. Threats associated with crash impacts caused by moving cars or planes are considered. To ensure safety of these construction sites it is required to know the potential dynamic loads and their destructive capacity. This article considers the methodology of reducing dynamic loads associated with impacts caused by moving collapsing solids and blast loads to equivalent static loads. It is demonstrated that practically used methods of reduction of dynamic loads to static loads are based in schematization only of the positive phase of a dynamic load in a triangle forms are not always correct and true. The historical roots of this approach which is not correct nowadays are shown; such approach considered a detonation explosion as a source of dynamic load, including TNT and even a nuclear weapon. Application of the existing practices of reduction of dynamic load to static load for accidental explosions in the atmosphere that occur in deflagration mode with a significant vacuumization phase may cause crucial distortion of predicted loads for the construction sites. This circumstance may become a matter of specific importance at calculations of potential hazard of impacts and explosions in unique units — for instance, in the nuclear plants. The article considers a situation with a plane crash, the building structure load parameters generated at the impact caused by a plane impact and the following deflagration explosion of fuel vapors are determined.

Modeling the operation of structures made of dispersed-reinforced concrete with an alternating dynamic load of high intensity

2021 ◽  
Vol 14 (3) ◽  
pp. 36-44
Author(s):  
S. Nikolenko ◽  
Svetlana Sazonova ◽  
Viktor Asminin
Keyword(s):  
Reinforced Concrete ◽  
Dynamic Load ◽  
High Intensity ◽  
Concrete Beam ◽  
Static Load ◽  
Dynamic Compression ◽  
Experimental Studies ◽  
Reinforced Concrete Beam ◽  
Beam Elements ◽  
Laminated Structures

A study of the properties of dispersed-reinforced concrete and a study of the effect of dispersed reinforcement on the operation of structures was carried out, mainly with a static load of the same sign. Based on the results of experimental studies, a comparison was made of the work of dispersed-laminated structures under alternating dynamic action of high intensity with the work of reinforced concrete beam elements under similar influences. The results of experimental studies of cubes and prisms for static and dynamic compression are also presented. The results of experimental studies allow us to conclude that there is a significant effect of dispersed reinforcement on the operation of structures under the investigated influences and the feasibility of combined reinforcement of structures. The use of dispersed reinforcement in structures will increase the resistance of structures to such influences.

Measuring heavy traffic with WIM-ROAD and WIM-BRIDGE systems in an urban environment

2021 ◽  
Author(s):  
Maarten Soudijn ◽  
Sebastiaan van Rossum ◽  
Ane de Boer
Keyword(s):  
Heavy Traffic ◽  
Pressure Sensors ◽  
Strain Sensors ◽  
Traffic Load ◽  
Structural Safety ◽  
Special Focus ◽  
The Road ◽  
Weigh In Motion ◽  
Set Up ◽  
Calibration Program

<p>In this paper we present weight measurements of urban heavy traffic comparing two different Weigh In Motion (WIM) systems. One is a WIM-ROAD system using Lineas quartz pressure sensors in the road surface. The other is a WIM-BRIDGE system using optical fibre-based strain sensors which are applied under the bridge to the bottom fibre of a single span of the bridge deck. We have designed our tests to determine which system is most suited to Amsterdam. We put special focus on the accuracy that each system can achieve and have set up an extensive calibration program to determine this. Our ultimate goal is to draw up a realistic traffic load model for Amsterdam. This model would lead to a recommendation that can be used to re- examine the structural safety of existing historic bridges and quay walls, in addition to the current traffic load recommendations.</p>

The Slabbing Mechanics Analysis of the Tunnel Lining

2011 ◽  
Vol 243-249 ◽  
pp. 3530-3537
Author(s):  
Zu Song Wu ◽  
Guang Qi Chen ◽  
Kou Ki Zen ◽  
Xin Rong Liu
Keyword(s):  
Surrounding Rock ◽  
Tunnel Lining ◽  
The Self ◽  
Road Tunnel ◽  
The Road ◽  
Mechanics Analysis ◽  
The Stability

When the road tunnel is excavated, the multi lining is used to being applied. In order to keep the surrounding rock stabilize and arouse the self-stability of the surrounding rock, building the first support is essential. But the slabbing often occurs near the spring line on the surface of the first lining, and because the slabbling is a common failing and not attracted our most attentions, it will develop to the crack and threaten the stability of the structure finally. This paper uses the line elastic method to analyze the mechanics that causes this slabbing phenomenon via the interaction between the surrounding rock and the first lining, and suggests the measure that escape the slabbing.

Calculation of Static Safety Coefficient about Loess Cave

2011 ◽  
Vol 189-193 ◽  
pp. 2366-2370
Author(s):  
Jun Hong Li
Keyword(s):  
Finite Element ◽  
Yield Criterion ◽  
Soil Layer ◽  
Engineering Application ◽  
Static Stability ◽  
Strength Reduction ◽  
Engineering Practice ◽  
Stability Calculation ◽  
Safety Coefficient ◽  
The Stability

For the loess cave characteristics, such as the thin coverage soil layer at the hole top, the poor self-stabilizing capacity, the large disturbance deformation after excavation and the easy collapse, thus in this paper, the loess cave safety factor is obtained by the method of strength reduction. And the stability calculation analysis is much more perfect. The Northwest Area Lishi loess cave is used in this paper, and the idea of strength reduction finite element method is applied, based on the Drucker-Prager yield criterion, the loess cave static stability analysis is made by the software of ANSYS.The results show that the actual situation can be reflected by the method of finite element strength subtraction. And the obtained loess cave stability coefficient is much closer to the actual steady state, thus showing the certain advantages of stability analysis.The method is also adopted in this paper. And its feasibility can be applied to the engineering practice, also a theoretical basis of reference is provided for engineering application.

scholarly journals Soil geohazard mapping for improved asset management of UK local roads

2015 ◽  
Vol 3 (5) ◽  
pp. 3151-3180 ◽  
Author(s):  
O. G. Pritchard ◽  
S. H. Hallett ◽  
T. S. Farewell
Keyword(s):  
Asset Management ◽  
Road Network ◽  
Clay Soils ◽  
Climate Projections ◽  
Significant Deterioration ◽  
East Anglia ◽  
The Road ◽  
Local Roads ◽  
Ultimate Failure ◽  
The Uk

Abstract. Unclassified roads comprise 60% of the road network in the United Kingdom (UK). The resilience of this locally important network is declining. It is considered by the Institution of Civil Engineers to be "at risk" and is ranked 26th in the world. Many factors contribute to the degradation and ultimate failure of particular road sections. However, several UK local authorities have identified that in drought conditions, road sections founded upon shrink/swell susceptible clay soils undergo significant deterioration compared with sections on non-susceptible soils. This arises from the local road network having little, if any structural foundations. Consequently, droughts in East Anglia have resulted in millions of pounds of damage, leading authorities to seek emergency governmental funding. This paper assesses the use of soil-related geohazard assessments in providing soil-informed maintenance strategies for the asset management of the locally important road network of the UK. A case study draws upon the UK administrative county of Lincolnshire, where road assessment data have been analysed against mapped clay-subsidence risk. This reveals a statistically significant relationship between road condition and susceptible clay soils. Furthermore, incorporation of UKCP09 future climate projections within the geohazard models has highlighted roads likely to be at future risk of clay-related subsidence.

Sign in / Sign up

Export Citation Format

Share Document