scholarly journals Bond Behavior between Steel Rebar and RCA Concrete after Exposure to Elevated Temperatures

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Wanjie Zou ◽  
Jiongfeng Liang ◽  
Dawei Liu ◽  
Guangwu Zhang
Keyword(s):  
Bond Strength ◽  
Elevated Temperatures ◽  
Coarse Aggregate ◽  
Test Results ◽  
Modified Model ◽  
Bond Slip ◽  
Bond Behavior ◽  
Steel Rebar ◽  
Exposure Temperature ◽  
Increasing Temperature

To explore the bond behavior between steel rebar and recycled coarse aggregate (RCA) concrete after exposure to elevated temperatures, an experimental study was carried out. The results demonstrated that the bond strength of RCA concrete pullout specimens decreased greatly with increasing temperature. As the exposure temperature elevated, the slope of the ascending portion of the bond-slip curves gradually declined, and the descending portion of the curves tended to flatten. A modified model was developed to predict the bond strength between RCA concrete and steel rebar after exposure to elevated temperature, and the predicted results showed a very good fit in the experimental test results. Besides, the proposed bond-slip relations for steel rebar in RCA concrete after elevated temperatures showed satisfactory agreement with test results.

scholarly journals Experimental and Numerical Investigation on the Steel Reinforced Grout (SRG) Composite-to-Concrete Bond

2020 ◽  
Vol 4 (4) ◽  
pp. 182
Author(s):  
Luciano Ombres ◽  
Salvatore Verre
Keyword(s):  
Bond Length ◽  
Failure Modes ◽  
Peak Load ◽  
Element Model ◽  
Test Results ◽  
Shear Tests ◽  
Bond Slip ◽  
Bond Behavior ◽  
Direct Shear Tests ◽  
Inorganic Matrix

In the paper, the bond between a composite strengthening system consisting of steel textiles embedded into an inorganic matrix (steel reinforced grout, SRG) and the concrete substrate, is investigated. An experimental investigation was carried out on medium density SRG specimens; direct shear tests were conducted on 20 specimens to analyze the effect of the bond length, and the age of the composite strip on the SRG-to-concrete bond behavior. In particular, the tests were conducted considering five bond length (100, 200, 250, 330, and 450 mm), and the composite strip’s age 14th, 21st, and 28th day after the bonding. Test results in the form of peak load, failure modes and, bond-slip diagrams were presented and discussed. A finite element model developed through commercial software to replicate the behavior of SRG strips, is also proposed. The effectiveness of the proposed numerical model was validated by the comparison between its predictions and experimental results.

scholarly journals Effect of Elevated Temperature on the Bond Strength of Prestressing Reinforcement in UHPC

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4990
Author(s):  
Petr Pokorný ◽  
Jiří Kolísko ◽  
David Čítek ◽  
Michaela Kostelecká
Keyword(s):  
Bond Strength ◽  
High Performance ◽  
Elevated Temperatures ◽  
High Performance Concrete ◽  
Future Research ◽  
Ultra High Performance Concrete ◽  
Negative Effect ◽  
Laboratory Investigations ◽  
Increasing Temperature ◽  
Positive Effect

The study explores the effect of elevated temperatures on the bond strength between prestressing reinforcement and ultra-high performance concrete (UHPC). Laboratory investigations reveal that the changes in bond strength correspond well with the changes in compressive strength of UHPC and their correlation can be mathematically described. Exposition of specimens to temperatures up to 200 °C does not reduce bond strength as a negative effect of increasing temperature is outweighed by the positive effect of thermal increase on the reactivity of silica fume in UHPC mixture. Above 200 °C, bond strength significantly reduces; for instance, a decrease by about 70% is observed at 800 °C. The decreases in compressive and bond strengths for temperatures above 400 °C are related to the changes of phase composition of UHPC matrix (as revealed by X-ray powder diffraction) and the changes in microstructure including the increase of porosity (verified by mercury intrusion porosimetry and observation of confocal microscopy) and development cracks detected by scanning electron microscopy. Future research should investigate the effect of relaxation of prestressing reinforcement with increasing temperature on bond strength reduction by numerical modelling.

scholarly journals Regression Analysis of Bond Parameters between Corroded Rebar and Concrete Based on Reported Test Data

2018 ◽  
Vol 2018 ◽  
pp. 1-18 ◽  
Author(s):  
H. J. Zhou ◽  
Y. F. Zhou ◽  
Y. N. Xu ◽  
Z. Y. Lin ◽  
F. Xing ◽  
...  
Keyword(s):  
Regression Analysis ◽  
Bond Strength ◽  
Crack Width ◽  
Experimental Tests ◽  
Test Results ◽  
Bond Slip ◽  
Regression Effect ◽  
Pull Out ◽  
Maximum Crack ◽  
Best Fit

Reinforcement corrosion is a major cause of degradation in reinforced concrete structures. The fragile rust layer and cracking and spalling of the cover caused by splitting stress due to rust expansion can alter bond behaviors significantly. Despite extensive experimental tests, no stochastic model has yet incorporated randomness into the bond parameters model. This paper gathered published experimental data on the bond-slip parameters of pull-out specimens and beam-end specimens. Regression analysis was carried out to identify the best fit of bond strength and the corresponding slip value in the context of different corrosion levels from the recollected test results. An F-test confirmed the regression effect to be significant. Residual data were also analyzed and found to be well described by a normal distribution. Crack width data of the tested specimens were also collected. A regression analysis of the bond strength and maximum crack width was carried out given the comparative simplicity of measuring crack width versus rebar area loss. Results indicate that maximum crack width can also be used to predict bond strength degradation with similar variation magnitude.

scholarly journals Experimental Investigation of the TRM-to-Masonry Bond after Exposure to Elevated Temperatures: Cementitious and Alkali-Activated Matrices of Various Densities

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 140
Author(s):  
Paraskevi D. Askouni ◽  
Catherine (Corina) G. Papanicolaou ◽  
Lazar Azdejkovic
Keyword(s):  
Experimental Investigation ◽  
Fly Ash ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Elevated Temperatures ◽  
Normal Weight ◽  
Heat Protection ◽  
Exposure Temperature ◽  
Alkali Activated ◽  
Textile Reinforced Mortar

Limited research has focused on the effect of high temperatures on the textile-reinforced mortar (TRM)-to-masonry bond. In this study, masonry prisms that were furnished with double-layered TRM strips were tested under shear bond conditions after their exposure to 200 °C and 400 °C for 1 h using the single-lap/single-prism setup. A total of four TRM systems were applied sharing the same type of textile –a dry AR glass fiber one– and different matrices: two cementitious matrices, namely a normal-weight (TRCNM) and a lightweight (TRCLM) one, and two counterpart alkali-activated matrices (TRAANM and TRAALM) based on metakaolin and fly ash. Specimens’ exposure to elevated temperatures did not alter their failure mode which was due to the sleeve fibers’ rupture along with core fibers’ slippage from the mortar. The residual bond capacity of the TRM systems decreases almost linearly with increasing exposure temperature. The alkali-activated textile reinforced mortars outperformed their cement-based counterparts in terms of bond strength at every temperature. All systems retained close to 50% of their original shear bond strength after heating at 400 °C. Per the type of binder, lightweight matrices resulted in either comparable (cement-based systems) or better (alkali-activated systems) heat protection at the TRM/masonry interface.

scholarly journals The Comparison of Bond Strength between Geopolymer Concrete and OPC Concrete for Plain Reinforcing Bars

2018 ◽  
Vol 159 ◽  
pp. 01017 ◽  
Author(s):  
Nuroji ◽  
Daniel Herdian Primadyas ◽  
Ilham Nurhuda ◽  
Muslikh
Keyword(s):  
Bond Strength ◽  
Geopolymer Concrete ◽  
Test Results ◽  
Reinforcing Bars ◽  
Normal Concrete ◽  
Steam Power ◽  
Bond Behavior ◽  
Pull Out ◽  
Concrete Blocks ◽  
Class F Fly Ash

This paper describes the research on bond behavior of plain reinforcing bars in geopolymer and normal concrete. The geopolymer concrete in this research was made of class F fly ash taken from Tanjung Jati Electric Steam Power Plant (PLTU) with Sodium Hydroxide (NaOH) and Sodium Silicate (Na2SiO3) as alkaline activator, added in the mixture. The effect of bar size was studied by varying the bar diameter in range 10 mm to 19 mm. Each bar was casted in the center of concrete blocks made of geopolymer as well as normal concrete. Pull-out tests were carried out to the specimens that have reached 28 days of age. The test results show that the bond behavior of geopolymer concrete differs substantially from normal concrete, where geopolymer concrete has a higher bond strength when compared to normal concrete with identical concrete strengths.

scholarly journals Interfacial Bond Behavior of High Strength Concrete Filled Steel Tube after Exposure to Elevated Temperatures and Cooled by Fire Hydrant

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 150
Author(s):  
Zongping Chen ◽  
Jiyu Tang ◽  
Xingyu Zhou ◽  
Ji Zhou ◽  
Jianjia Chen
Keyword(s):  
Bond Strength ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Steel Tube ◽  
Water Cooling ◽  
Interfacial Bond ◽  
Concrete Filled Steel Tube ◽  
Bond Behavior ◽  
Strength Concrete

For the engineering structure in case of fire, a fire hydrant is generally used for extinguishing the fire. This paper presents an experimental investigation on interfacial bond behavior of high-strength concrete-filled steel tube (HSCFST) after exposure to elevated temperatures and cooled by fire hydrant using the pull-out test of 22 specimens. According to the experimental study, the failure mechanism of HSCFST exposed to elevated temperatures and water-cooling (ETWC) was revealed, the influence of various parameters on the bond behavior was analyzed, and the calculation formula of the bond strength of HSCFST subjected to ETWC was put forward. The results show that the load-slip curves of the loading end and the free end of the specimen are basically similar, and can be divided into three types of typical curves. In the push out test, the strain on the outer surface of the steel tube is exponentially distributed with its distance from the loading end. After ETWC exposure, the bond strength of the specimen is less affected by the concrete strength, which is inversely proportional to the anchorage length, and it is basically stable after the constant temperature duration is longer than 60 min. With the increase of the maximum temperature, the ultimate bond strength increases first, then decreases and then increases, and the residual bond strength increases first and then decreases. Besides, the study indicate that cooling method has significant influence on the bond behavior, compared with natural cooling specimens, the ultimate bond strength, residual bond strength, and shear bond stiffness of water-cooling specimens are smaller, and the interfacial energy dissipation capacity is larger.

scholarly journals Experimental Study on Bond-Slip Behavior between H-Shaped Steel and Gypsum Cover in SGFCG

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Tao Sun ◽  
Kejian Ma ◽  
Zhihua Chen ◽  
Jin Chen ◽  
Yuhao Zhu
Keyword(s):  
Bond Strength ◽  
Compression Strength ◽  
Constitutive Relationship ◽  
Test Results ◽  
Bond Slip ◽  
Main Factors ◽  
Cover Thickness ◽  
Average Bond ◽  
Push Out

Nine push-out specimens of H-shaped steel with gypsum cover (HSG) are designed to study the bond-slip behavior between steel and gypsum in steel grid frame filling with cast-in-situ gypsum (SGFCG). Three main factors including gypsum compression strength (fcu), gypsum cover thickness (Cs), and steel-gypsum connected length (la) are considered. It is shown by the test results that the ultimate average bond strength is within [0.333–0.456] MPa, and the residual strength is about 90–98% of the ultimate strength. Both gypsum cover thickness and steel-gypsum connected length have evident influence on the bond strength, while the effect of gypsum compression strength is not obvious. Based on the test data, the formulas of average bond strength characteristics (τs¯, τu¯, and τr¯) and slip characteristics (Su and Sr) are established by statistical fitting. Furthermore, the bond-slip constitutive relationship (τ¯−S) is recommended.

Bond-Slip Constitutive Behavior between Fiber-Reinforced Polymer and Masonry

2012 ◽  
Vol 446-449 ◽  
pp. 3165-3170 ◽  
Author(s):  
Yi Zheng ◽  
Jin Qing Jia ◽  
Li Li ◽  
Shi Kuan You
Keyword(s):  
Constitutive Models ◽  
Bond Stress ◽  
Fiber Reinforced Polymer ◽  
Strain Gauges ◽  
Test Results ◽  
Hydraulic Jack ◽  
Bond Slip ◽  
Bond Behavior ◽  
Frp Composite ◽  
Reinforced Polymer

To study the bond behavior and the force transference of FRP plates adhered to masonry. In this paper, experiments of anchorage strength of FRP attached to masonry are done, a 100KN capacity hydraulic jack activated by a manual pump was used to load the specimen. The tensile strength was measured by using a loading transducer, and strain gauges were mounted directly onto the surface of the FRP composite to measure the strain during application of load. Besides the strain and bond stress development and distribution under every grade of loading were studied. Test results show that the maximum local bond stress is not influenced by the FRP bond length, instead it increases with masonry strength. At the same time, the local bond stress--slip curve is obtained. Based on the test results, two new bond stress-slip constitutive models between FRP and masonry were proposed and they turned out to be good matches to the experimental results, which indicate its valuable references for the corresponding codes and engineering applications.

scholarly journals Finite element analysis on the bond behavior of steel bar in salt–frost-damaged recycled coarse aggregate concrete

2021 ◽  
Vol 60 (1) ◽  
pp. 853-861
Author(s):  
Tian Su ◽  
Ting Wang ◽  
Haihe Yi ◽  
Rui Zheng ◽  
Yizhe Liu ◽  
...  
Keyword(s):  
Bond Strength ◽  
Concrete Cover ◽  
Bond Slip ◽  
Bond Behavior ◽  
Steel Bar ◽  
Calculation Results ◽  
Cover Thickness ◽  
Bar Diameter ◽  
Good Agreement ◽  
Ultimate Bond Strength

Abstract In this article, the ABAQUS finite element software is used to simulate the bond behavior of the steel bar in salt–frost-damaged recycled coarse aggregate concrete, and the influence of the steel bar diameter and the concrete cover thickness on the bond strength is investigated. The result shows that the calculated bond–slip curve is in good agreement with the experimental bond–slip curve; the mean value of the ratio of the calculation results of ultimate bond strength to the experiment results of ultimate bond strength is 1.035, the standard deviation is 0.0165, and the coefficient of variation is 0.0159, which proves that the calculation results of the ultimate bond strength are in good agreement with the experimental results; with the increase of steel bar diameter and the concrete cover thickness, the ultimate bonding strength of RAC and steel increases; the calculation formulas for the ultimate bond strength of specimens with different steel bar diameters (concrete cover thickness) after different salt–frost cycles are obtained.

Sign in / Sign up

Export Citation Format

Share Document