scholarly journals Evaluating the Physical and Rheological Properties of Rejuvenated Styrene-Butadiene-Styrene-Modified Asphalt Binders

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xiaobing Chen ◽  
Juntian Wang ◽  
Xiaorui Zhang ◽  
Han Liu ◽  
Jinhu Tong ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Fatigue Cracking ◽  
Creep Recovery ◽  
Optimal Dosage ◽  
Type I ◽  
Yield Strain ◽  
Modified Asphalt ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

To evaluate the physical and rheological properties of rejuvenated styrene-butadiene-styrene-modified asphalt (SBSMA) binders designed for rapid in-place pavement recycling, an aged SBSMA binder was rejuvenated with three rejuvenators (i.e., Types I, II, and III) in different dosages. The physical properties of rejuvenated SBSMA were obtained to determine the optimal type and dosage of rejuvenators for the first and second rejuvenation. Performance grade (PG) tests, multiple stress creep recovery (MSCR) tests, and linear amplitude sweep (LAS) tests were conducted to measure the rheological properties using the dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The results exhibited that the rejuvenators could soften the multiple aged binder and enhance its high- and low-temperature performance. The rejuvenation effect of rejuvenator Type I with the optimal dosage of 6∼8% was the most appropriate for the first rejuvenation. The optimal dosage of the second rejuvenation was 10∼12%. The addition of rejuvenators decreased the rutting factor G∗/sin δ, creep stiffness (S), delta Tc (ΔTc) parameter, recovery response (R), and yield stress of rejuvenated SBSMA. On the other hand, an increase in the rate of relaxation (m-value), nonrecoverable creep compliance (Jnr), and yield strain of rejuvenated SBSMA was recorded. Overall, the study findings indicated an improvement in the elastic properties of rejuvenated SBSMA, which contributes to improving the rutting, thermal, and fatigue cracking resistance of asphalt binder and ultimately the response of asphalt pavements.

scholarly journals Characterization of Desulfurized Crumb Rubber/Styrene–Butadiene–Styrene Composite Modified Asphalt Based on Rheological Properties

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3780
Author(s):  
Jingyao Yang ◽  
Gang Xu ◽  
Peipei Kong ◽  
Xianhua Chen
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Construction Materials ◽  
Chemical Reactor ◽  
Crumb Rubber ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

With the growing interest in bituminous construction materials, desulfurized crumb rubber (CR)/styrene–butadiene–styrene (SBS) modified asphalts have been investigated by many researchers as low-cost environmental-friendly road construction materials. This study aimed to investigate the rheological properties of desulfurized CR/SBS composite modified asphalt within various temperature ranges. Bending beam rheometer (BBR), linear amplitude sweep (LAS), and multiple stress creep recovery (MSCR) tests were performed on conventional CR/SBS composite modified asphalt and five types of desulfurized CR/SBS modified asphalts. Meanwhile, Burgers’ model and the Kelvin–Voigt model were used to derive nonlinear viscoelastic parameters and analyze the viscoelastic mechanical behavior of the asphalts. The experimental results indicate that both the desulfurized CR/SBS composite modifier and force chemical reactor technique can enhance the crosslinking of CR and SBS copolymer, resulting in an improved high-, intermediate-, and low-temperature performance of desulfurized CR/SBS composite modified asphalt. Burgers’ model was found to be apposite in simulating the creep stages obtained from MSCR tests for CR/SBS composite modified asphalts. The superior high-temperature performance of desulfurized CR/SBS modified asphalt prepared with 4% SBS, 20% desulfurized rubber, and a force chemical reactor time of 45 min contributes to the good high-temperature elastic properties of the asphalt. Therefore, this combination is recommended as an optimal preparation process. In summary, the desulfurization of crumb rubber and using the force chemical reactor technique are beneficial to composite asphalt performance and can provide a new way of utilizing waste tire rubber.

scholarly journals Improving Storage Stability and Physicochemical Performance of Styrene-Butadiene-Styrene Asphalt Binder Modified with Nanosilica

2020 ◽  
Vol 12 (21) ◽  
pp. 8968
Author(s):  
Nonde Lushinga ◽  
Liping Cao ◽  
Zejiao Dong ◽  
Cyriaque O. Assogba
Keyword(s):  
Storage Stability ◽  
Storage Temperature ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Proton Nuclear Magnetic Resonance ◽  
Creep Recovery ◽  
Modified Binders ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Due to storage stability drawbacks of polymer-modified bitumen (PMB), this study investigated the storage stability and physicochemical performance of Styrene-Butadiene-Styrene (SBS) asphalt binders (herein PMB) modified with Silicone surface-treated nanosilica (SNS). Dosages 0% (control), 1.5%, 3% and 5% SNS powder were added to PMB to prepare modified binders. Hot storage, Viscosity, Multiple Stress Creep Recovery (MSCR), Scanning Electron Microscopy (SEM), Fluorescence Microscopy (FM), Linear Amplitude Sweep (LAS), Fourier Transform Infrared (FTIR), and Proton Nuclear Magnetic Resonance (1H-NMR) tests were conducted using modified binders. The study found that adding nanosilica powder to PMB improved storage stability, increased viscosity and complex modulus, and reduced rutting of binders. However, this bitumen modification was not beneficial to fatigue cracking. The performance improvement was because of the interaction between the polymer and nanosilica, creating a new polymer-nanosilica network which lowered the dynamics around the SNS particles, thereby reducing phase separation. Further, the Silicone Si–O–Si backbone bond present in SNS modified asphalt binder reduced temperature sensitivity thereby preventing thermal degradation at high storage temperature. Nanosilica modified binders presented well-dispersed nanosilica particles in the asphalt matrix. The modification mechanism was predominantly physical. Overall, the study concluded that nanosilica improves storage stability, rutting, and morphology of PMB binders.

scholarly journals Aging Resistance of Silica Fume/Styrene-Butadiene-Styrene Composite-Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6536
Author(s):  
Jingrong Zhu ◽  
Wenyuan Xu
Keyword(s):  
Rheological Properties ◽  
Silica Fume ◽  
Asphalt Mixture ◽  
Original Structure ◽  
Modified Asphalt ◽  
Aging Resistance ◽  
Styrene Butadiene Styrene ◽  
Index Value ◽  
Styrene Butadiene ◽  
Butadiene Styrene

The influences of silica fume content and aging on the rheological properties of silica fume/styrene-butadiene-styrene composite-modified asphalts were investigated via rolling thin-film oven test simulations. The asphalts rheological properties before and after aging were measured using three-major-indices, dynamic shear rheology, and bending beam rheometer tests. Fourier transform infrared spectroscopy was used to examine the changes in the functional groups of the asphalt. The silica fume did not chemically react with the modified asphalt, and its original structure was maintained. The aging resistance improved significantly after adding the silica fume. At 6% silica fume content, the relaxation of the asphalt was the highest, indicating that the asphalt had the best low-temperature crack resistance at this mixing proportion. Furthermore, the carbonyl index value of this sample exhibited the smallest increment among all of the samples, and this asphalt sample had the strongest short-term aging resistance. Thus, the optimum silica fume content in the composite-modified asphalt was determined to be 6%. This information may be used to fabricate an asphalt mixture that can improve the service life and aging resistance of pavements.

scholarly journals Evaluation of Properties and Micro-Characteristics of Waste Polyurethane/Styrene-Butadiene-Styrene Composite Modified Asphalt

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2249
Author(s):  
Bei Chen ◽  
Fuqiang Dong ◽  
Xin Yu ◽  
Changjiang Zheng
Keyword(s):  
Low Temperature ◽  
Performance Test ◽  
Permanent Deformation ◽  
Modified Asphalt ◽  
Basic Performance ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt ◽  
And Storage ◽  
Butadiene Styrene

In order to solve the problems caused by asphalt diseases and prolong the life cycle of asphalt pavement, many studies on the properties of modified asphalt have been conducted, especially polyurethane (PU) modified asphalt. This study is to replace part of the styrene-butadiene-styrene (SBS) modifier with waste polyurethane (WP), for preparing WP/SBS composite modified asphalt, as well as exploring its properties and microstructure. On this basis, this paper studied the basic performance of WP/SBS composite modified asphalt with a conventional performance test, to analyze the high- and low-temperature rheological properties, permanent deformation resistance and storage stability of WP/SBS composite modified asphalt by dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests. The microstructure of WP/SBS composite modified asphalt was also observed by fluorescence microscope (FM) and Fourier transform infrared spectroscopy (FTIR), as well as the reaction between WP and asphalt. According to the results of this study, WP can replace SBS as a modifier to prepare WP/SBS composite modified asphalt with good low-temperature resistance, whose high-temperature performance will be lower than that of SBS modified asphalt. After comprehensive consideration, 4% SBS content and 15% WPU content (4 S/15 W) are determined as the suitable types of WPU/SBS composite modified asphalt.

Compatibility and Storage Stability of Asphalt Binder Modified by Styrene-Butadiene-Styrene (SBS) Graft Copolymer

2021 ◽  
Vol 1036 ◽  
pp. 459-470
Author(s):  
Hong Gang Zhang ◽  
Qiang Huai Zhang ◽  
Xue Ting Wang ◽  
Hua Tan ◽  
Li Ning Gao ◽  
...  
Keyword(s):  
Triblock Copolymer ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Solubility Parameters ◽  
Suitable Alternative ◽  
Modified Asphalt ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt ◽  
Butadiene Styrene

A styrene-butadiene-styrene triblock copolymer (SBS) was grafted with an unsaturated polar monomer (monomer A) composed of maleic anhydride (MAH) and methoxy polyethylene (MPEG) via a ring-opening reaction after epoxidizing styrene-butadiene-styrene triblock copolymer (ESBS). The microscopic changes of SBS before and after grafting has been characterized with Fourier transform infrared spectrum (FT-IR), X-ray photoelectron spectroscopy (XPS) and gel permeation chromatography (GPC). The results revealed that the monomer A was successfully grafted on SBS backbone, and the maximum graft ratio (GR) was 20.32%. To verify the compatibility between SBS and asphalt, solubility parameters and surface free energy (SFE) of SBS, grafted SBS and asphalt were measured. It was found that the solubility parameter and SFE of grafted SBS were closer to asphalt compared with SBS. It also has been confirmed from storage stability that the temperature susceptibility of grafted SBS modified asphalt was reduced in compare with SBS modified asphalt binder. As consequence, the use of grafted copolymer can be considered a suitable alternative for modification of asphalt binder in pavement.

Sign in / Sign up

Export Citation Format

Share Document