scholarly journals Analytical and Experimental Study of Focused Wave Action on a Partially Immersed Box

2019 ◽  
Vol 2019 ◽  
pp. 1-15
Author(s):  
Qinghe Fang ◽  
Anxin Guo

Focused wave is a practical laboratory method for reproducing extreme waves that cause catastrophic damage to marine and coastal structures. This paper presents a simple and efficient analytical method for predicting the hydrodynamic pressure and wave forces acting on a partially immersed box when subjected to a focused wave group attack. The boundary value issue of the physical problem is first investigated to derive an analytical formula based on potential flow theory and the matching eigenfunction method. Thereafter, the test data from a hydrodynamic experiment is used to verify the accuracy of the proposed analytical model. Using the validated analytical model, a parametric analysis is conducted to gain insight into the effects of the structural configuration and wave properties on the pressure and wave forces. It is observed that the hydrodynamic pressure on the offshore side plate, horizontal wave force, and moment are notably influenced by the structure breadth and draft. A focused wave with a lower peak frequency and higher focused amplitude is found to exert greater wave forces on the partially immersed box. The paper shows the value of linear wave theory for wave loads prediction even for focused waves although with some limitations.

2013 ◽  
Vol 328 ◽  
pp. 614-622
Author(s):  
Hong Da Shi ◽  
Shui Yu Li ◽  
Dong Wang

The dynamic characteristics of large-scale tunnel element are very important for the process of immersion. In the paper, the motions and stress of the element under wave actions were studied. The linear wave diffraction theory and the three-dimensional source distribution method were applied to calculate the wave loads and motion responses of the tunnel element under different incident wave conditions. In the study, there have no cable on the element. On the basis of the above theories, the stress and the motions of the element were studied. The first order wave forces and the second order wave force were deduced, and the motions equation was made.


Author(s):  
Jing Zhang ◽  
Qin Liu ◽  
Xing Hua Shi ◽  
C. Guedes Soares

As the offshore fixed wind turbine developed, more ones will be installed in the sea field with the depth 15–50 meters. Wave force will be one of the main forces that dominate the design of the wind turbine base, which is calculated using the Morison equation traditionally. This method can predict the wave forces for the small cylinders if the drag and inertia coefficients are obtained accurately. This paper will give a series scaled tests of monopile and jacket type base of the offshore wind turbine in tank to study the nonlinear wave loads.


1980 ◽  
Vol 20 (01) ◽  
pp. 5-14 ◽  
Author(s):  
Kim J. Vandiver

Abstract A method is presented for predicting the damping-controlled response of a structure at a known natural frequency to random wave forces. The principal advantage of the proposed method over those in current use proposed method over those in current use is that explicit calculation of wave forces is not required in the analysis. This is accomplished by application of the principle of reciprocity: that the linear wave force spectrum for a particular vibration mode is proportional to the radiation (wave-making) proportional to the radiation (wave-making) damping of that mode. Several example calculations are presented including the prediction of the heave response of a prediction of the heave response of a tension-leg platform. The directional distribution of the wave spectrum included in the analysis. Introduction This paper introduces a simple procedure for estimating the dynamic response of a structure at each of its natural frequencies to the random excitation of ocean waves. The principal advantage of the proposed method is that the explicit calculation of wave forces has been eliminated from the analysis. This is made possible by a direct applications of the reciprocity relations for ocean waves, originally established by Haskind and described by Newman, in a form that is easy to implement. Briefly stated, fore many structures it is possible to derive a simple expression for the wave force spectrum in terms of the radiation damping and the prescribed wave amplitude spectrum. In general, such a substitution is of little use because the radiation damping coefficient may be equally difficult to find. However, the substitution leads to a very useful result when the dynamically amplified response at a natural frequency is of concern. In such cases it is shown that, contrary to popular belief, the response is not inversely proportional to the total damping but is, in fact, proportional to the ratio of the radiation damping to the total damping. Therefore, in the absence of a reliable estimate of either the total damping or the ratio of the radiation component to the total, an upper bound estimate of the response still may be achieved because of the existence of this upper bound is one of the key contributions of this paper.Linear wave theory is assumed; therefore, excitation caused by drag forces is not considered. However, for many structures drag excitation is negligible except for very large wave events. In the design process extreme events are modeled deterministically process extreme events are modeled deterministically by means of a prescribed design wave and not stochastically as is done here. In many circumstances linear wave forces will dominate, and the results shown here will be applicable. Although drag-exciting forces are not included, damping resulting from hydrodynamic drag is included. Wave diffraction effects are extremely difficult to calculate. This analysis includes diffraction effects but never requires explicit evaluation of them.It has been recognized that directional spreading of the wave spectrum is an important consideration in the estimation of dynamic response. In this paper such effects are accounted for in closed-form expressions. The evaluation of the expressions requires knowledge of estimates of the variation of the modal exciting force with wave incidence angle. However, only the relative variation of the modal exciting force as a percent of that at an arbitrarily chosen reference angle is required. Evaluation of the wave force in absolute terms still is not required. SPEJ p. 5


Author(s):  
Sathyanarayanan Dhandapani ◽  
Muthukkumaran Kasinathan

Fixed offshore platforms supported by pile foundations are required to resist dynamic lateral loading due to wave forces. The response of a jacket offshore tower is affected by the flexibility and nonlinear behavior of the supporting piles. In this study, a typical fixed offshore platform is chosen, and dynamic wave analysis is performed on it. Analysis has been performed for normal environmental conditions and extreme conditions. For the foundation, the deflections and reactions at regular intervals along the vertical direction from the seabed have been found out from the dynamic analysis, and the results have been compared for normal and extreme conditions. The aim of this study is to investigate the effects of the combined lateral and vertical loads on pile group foundation of a fixed offshore structure and the effects of seabed slope on the pile responses. To provide a more accurate and effective design for offshore pile foundation systems under axial structural loads and lateral wave loads, a finite element model which is modelled in FLAC3D is employed herein to determine the soil structure interaction under similar loading conditions. Three dimensional modelling and the analyses are done using FLAC3D — a finite element package.


Author(s):  
Weiguang Bao ◽  
Fenfang Zhao ◽  
Takeshi Kinoshita

To evaluate wave forces and to estimate the motion of breakwater, a circular cylinder is investigated based on the linear wave theory in the present work. The cylinder possesses a porous sidewall, an impermeable bottom and a horizontal porous plate inside that is fixed in the cylinder to work as obstruct and make wave dissipation more effectively. To simplify the problem, the Darcy’s fine-pore model is applied to the boundary condition on the porous body surface. The boundary value problem is solved by means of the eigen-function expansion approach. The fluid domain is divided into three regions and different eigen-function series are used. The so-called dispersion relation for the region inside the cylinder is quite different from a conventional one due to the existence of the porous plate. It leads to eigen values of complex number. To obtain solutions for the radiation problems, particular solution should be constructed to take account of the normal velocity appearing on the porous boundary. The wave loads are evaluated by integrating the pressure difference on two sides of the wetted body surface. The theoretical works are in good consistence with the experimental results. The Haskind relations are examined for the porous body. It is found that the damping coefficient consists of two parts. In addition to the component of conventional wave-radiating damping, exists a second component caused by the porous effects.


1982 ◽  
Vol 1 (18) ◽  
pp. 108
Author(s):  
Bernard LeMehaute ◽  
James Walker ◽  
John Headland ◽  
John Wang

A method of calculating nonlinear wave induced forces and moments on piles of variable diameter is presented. The method is based on the Morrison equation and the linear wave theory with correction parameters to account for convective inertial effects in the wave field. These corrections are based on the stream function wave theory by Dean (1974). The method permits one to take into account the added wave force due to marine growth in the intertidal zone or due to a protective jacket, and can also be used to calculate forces on braces and an array of piles.


2018 ◽  
Vol 2018 ◽  
pp. 1-14
Author(s):  
Weiliang Qiao ◽  
Keh-Han Wang ◽  
Wenqi Duan ◽  
Yuqing Sun

A set of two-dimensional analytical solutions considering the effects of diffraction and radiation are presented in this study to investigate the hydrodynamic interaction between an incident linear wave and a proposed floating breakwater system consisting of a rectangular-shaped body and two attached vertical side porous walls in an infinite fluid domain with finite water depth. The Matched Eigenfunction Expansion Method (MEEM) for multiple fluid domains is applied to derive theoretically the velocity potentials and associated unknown coefficients for wave diffraction and body motion induced radiation in each subdomain. Also, the exciting forces, as well as the added mass and damping coefficients for the floating breakwater system under the surge, heave, and pitching motions, are formulated. The displacements of breakwater motions are determined by solving the equation of motion. As a verification of the analytical model, the present solutions of the limiting cases in terms of exciting forces, moments, added masses, and damping coefficients are found to be well matched with other published numerical results. Additionally, the hydrodynamic performances and the dynamic responses in terms of Response Amplitude Operators (RAOs) of the proposed floating breakwater system are evaluated versus various dimensionless variables, such as wavelength and porous-effect parameter. The results show that the attached porous walls with selected porous properties are observed to have the advantages of reducing wave impacts on the floating breakwater system and at the same time its dynamic responses are also noticeably improved.


1994 ◽  
Vol 21 (5) ◽  
pp. 762-769 ◽  
Author(s):  
Michael Isaacson ◽  
Kwok Fai Cheung

A recently developed numerical method for second-order wave diffraction is summarized and is used to develop a simplified approach to predicting nonlinear runup and maximum wave loads for large coastal and offshore structures subjected to regular waves. The perturbation method on which the method is based is extended to provide correction factors for the runup and maximum loads. These correction factors apply directly to the predictions of linear diffraction theory, and are independent of the wave height. The correction factors for runup, maximum force and maximum overturning moment are provided for a range of geometric parameters relating to the case of a large circular cylinder extending from the seabed to the free surface. Nonlinear runup and load maxima calculated by the correction factors are compared with the results of previous experimental studies; in general, favourable agreement is obtained. An example application of the proposed procedure is provided, the importance of nonlinear effects in the evaluation of runup and wave loads is discussed, and the limitations of the results are indicated. Key words: coastal structures, diffraction, hydrodynamics, ocean engineering, offshore structures, wave runup, wave force, waves.


Author(s):  
K. Vijayalakshmi ◽  
S. Neelamani ◽  
R. Sundaravadivelu

The wave force on a seawater intake well model consisting of a perforated circular caisson (500mm diameter) encircling a vertical suction pipe (50mm dia) is measured experimentally. The effect of porosity of the caisson wall, incident wave height and wave period on the in-line forces on the caisson and suction pipe is investigated. The porosity of the caisson was varied from 4.54% to 19.15%. Waves of wide ranges of heights and periods were used. The wave forces on the outer caisson & inner cylinder, water surface fluctuations in the interior & exterior of the caisson and wave run-up on the outer caisson & inner cylinder are studied. The present paper includes the wave forces on the outer perforated circular caisson and inner circular cylinder due to regular waves only.


Author(s):  
Jorge Ramirez ◽  
Peter Frigaard ◽  
Thomas Lykke Andersen ◽  
Erik Damgaard Christensen

CFD models are promising in predicting non-linear wave loads on fixed and floating offshore structures. The NS3 model is described in this paper and it has been validated by means of model test such as wave run-up on monopiles in regular waves. The goal for the use of the NS3 model is to make a detailed investigation of the effect of 2D waves on the run-up height. The focused wave is designed by choosing the phases of the linear harmonic components such that they are in phase at a certain target location. The aim of this paper is the approach on the ability of NS3 model to reproduce these focused wave groups and compare with the results of the experimental tests carried out at Grossen WellenKanal (GWK).


Sign in / Sign up

Export Citation Format

Share Document