scholarly journals The Impact of Dispatchability of Parabolic Trough CSP Plants over PV Power Plants in Palestinian Territories

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Aysar M. Yasin

This paper investigates the impacts of dispatchability of Parabolic Trough Concentrated Solar Power (PT-CSP) systems over PV power plants in Palestinian territories. Jericho governorate was taken as a case study. All conditions required for implementing PV and PT-CSP systems are verified. The capacity of each investigated system is 1 MW, and both systems are investigated in terms of technical, economic, and environmental aspects. The parametric analysis is used to identify the most feasible option of each renewable energy system by varying the cost of each option candidate and introducing thermal energy storage (TES) to the technology of PT-CSP systems with different capacities. A software based on the MATLAB environment is programmed to estimate the energy produced from each system with the important technical, financial, and environmental indicators. It is found that the alternative of installing a 1 MW PV system is the installation of 1 MWe PT-CSP systems with 14.5 h or 18.5 h TES. Introducing TES improves the dispatchability of the system and the capacity factor which consequently justifies the PT-CSP system investment. Increasing the degree of dispatchability improves the capacity factor of the PT-CSP system from 21% at 0 h TES to 57% at 18.5 h TES (24 h operation). The capacity factor of the PV system is 18.7% which is mostly similar to PT-CSP with zero dispatchability (0 h TES). The study considers the environmental benefits by estimating the amount of avoided CO2 emissions, and it was found that increasing the capacity factor augments the environmental benefits.

Author(s):  
Henry Price ◽  
David Kearney

Parabolic trough solar technology is the most proven and lowest cost large-scale solar power technology available today, primarily because of the nine large commercial-scale solar power plants that are operating in the California Mojave Desert. However, no new plants have been built during the past ten years because the cost of power from these plants is more expensive than power from conventional fossil fuel power plants. This paper reviews the current cost of energy and the potential for reducing the cost of energy from parabolic trough solar power plant technology based on the latest technological advancements and projected improvements from industry and sponsored R&D. The paper also looks at the impact of project financing and incentives on the cost of energy.


This paper investigates the impact of investments in DSM technologies in Palestinian electricity market in order to solve the problem of supply shortages in electrical network, especially in peak demand periods. Renewable hybrid system, which can explore solar PV source at low cost, is a popular choice for this purpose nowadays, optimal energy management solutions can be obtained with great cost savings and active control performance. This paper analyzes the performance and feasibility of implementation DSM system in Palestinian distribution network, using on-grid PV system and energy management system.


2017 ◽  
Vol 114 (45) ◽  
pp. 11867-11872 ◽  
Author(s):  
Xiaoyuan Li ◽  
Fabian Wagner ◽  
Wei Peng ◽  
Junnan Yang ◽  
Denise L. Mauzerall

Solar photovoltaic (PV) electricity generation is expanding rapidly in China, with total capacity projected to be 400 GW by 2030. However, severe aerosol pollution over China reduces solar radiation reaching the surface. We estimate the aerosol impact on solar PV electricity generation at the provincial and regional grid levels in China. Our approach is to examine the 12-year (2003–2014) average reduction in point-of-array irradiance (POAI) caused by aerosols in the atmosphere. We apply satellite-derived surface irradiance data from the NASA Clouds and the Earth’s Radiant Energy System (CERES) with a PV performance model (PVLIB-Python) to calculate the impact of aerosols and clouds on POAI. Our findings reveal that aerosols over northern and eastern China, the most polluted regions, reduce annual average POAI by up to 1.5 kWh/m2per day relative to pollution-free conditions, a decrease of up to 35%. Annual average reductions of POAI over both northern and eastern China are about 20–25%. We also evaluate the seasonal variability of the impact and find that aerosols in this region are as important as clouds in winter. Furthermore, we find that aerosols decrease electricity output of tracking PV systems more than those with fixed arrays: over eastern China, POAI is reduced by 21% for fixed systems at optimal angle and 34% for two-axis tracking systems. We conclude that PV system performance in northern and eastern China will benefit from improvements in air quality and will facilitate that improvement by providing emission-free electricity.


2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Martin Libra ◽  
Pavel Kouřím ◽  
Vladislav Poulek

PV power plants have been recently installed in very large scale. So the effects of the solar eclipse are of big importance especially for grid connected photovoltaic (PV) systems. There was a partial solar eclipse in Prague on 20th March 2015. We have evaluated the data from our facility in order to monitor the impact of this natural phenomenon on the behavior of PV system, and these results are presented in the paper. The behavior of PV system corresponds with the theoretical assumption. The power decrease of the PV array corresponds with the relative size of the solar eclipse.I-Vcharacteristics of the PV panel correspond to the theoretical model presented in our previous work.


Author(s):  
U. Pysmenna ◽  
G. Trypolska ◽  
T. Kurbatova ◽  
O. Kubatko

The article considers the preconditions for sustainable development of the energy sector from the standpoint of political and economic basis of energy transitions, actualizes and reveals the scientific problem of the impact of socio-technical transitions, in particular energy, on economic sustainability. It is determined that the task of assessing the efficiency of the energy system as a set of criteria for achieving a compromise of interests, stability and reliability of energy markets is best solved by assessing energy sustainability. Problems and ways to intensify the use of energy policy levers to promote sustainable energy transitions have been identified. It is determined that with the help of sustainable energy transitions the state is able to overcome its own inefficiency of energy conversion and consumption and to demonstrate the phenomenon of decoupling (economic growth without significant growth of energy consumption). Energy policies and strategies as means of energy transition management are considered: creation of preconditions for their occurrence; acceleration / deceleration, support of current transittions; minimization of negative external factors and social factors of vulnerability to changes in socio-technical regimes; maintaining an optimal energy balance. A deeper understanding of the process of energy transition management, vulnerability of energy systems under their influence has been achieved. Three key factors of energy transition management in order to strengthen the level of energy sustainability and ensure sustainable development of the economy: the course (flow) of transitions, the vulnerability of the economic system under their influence and the level of sustainability of energy transitions. Effective management of such transitions with the help of these factors can be a guarantee of sustainable development not only of the energy sector but also of the economy as a whole and create the conditions for its transition to a sustainable and circular type of development. The management of energy transitions in the energy sector of Ukraine is analyzed on the example of diversification of electricity supply through the operation of small solar power plants in private households.


2010 ◽  
Vol 14 (3) ◽  
pp. 715-727 ◽  
Author(s):  
Anes Kazagic ◽  
Izet Smajevic ◽  
Neven Duic

This paper deals with optimization of coal combustion conditions to support selection a sustainable combustion technology and an optimal furnace and boiler design. A methodology for optimization of coal combustion conditions is proposed and demonstrated on the example of Bosnian coals. The properties of Bosnian coals vary widely from one coal basin to the next, even between coal mines within the same basin. Very high percentage of ash (particularly in Bosnian brown coal) makes clear certain differences between Bosnian coal types and other world coal types, providing a strong argument for investigating specific problems related to the combustion of Bosnian coals, as well as ways to improve their combustion behavior. In this work, options of the referent energy system (boiler) with different process temperatures, corresponding to the different combustion technologies; pulverised fuel combustion (slag tap or dry bottom furnace) and fluidized bed combustion, are under consideration for the coals tested. Sustainability assessment, based on calculation economic and environment indicators, in combination with common low cost planning method, is used for the optimization. The total costs in the lifetime are presented by General index of total costs, calculated on the base of agglomeration of basic economic indicators and the economic indicators derived from environmental indicators. So, proposed methodology is based on identification of those combustion technologies and combustion conditions for coals tested for which the total costs in lifetime of the system under consideration are lowest, provided that all environmental issues of the energy system is fulfilled during the lifetime. Inputs for calculation of the sustainability indicators are provided by the measurements on an experimental furnace with possibility of infinite variation of process temperature, supported by good praxis from the power plants which use the fuels tested and by thermal calculations of the different options (different temperature in the boiler furnace) of the referent energy system.


2018 ◽  
Vol 8 (2) ◽  
pp. 53-59
Author(s):  
Gozde Taylan ◽  
Onur Taylan ◽  
Murat Fahrioglu

Since usage of fossil fuels for producing electricity causes climate change, renewable energy options have become one of the best substitution for fossil fuels. Solar energy promises high amount of resources for producing electricity. Among solar energy alternatives, Photovoltaic (PV) and Parabolic Trough Collectors (PTC) are dominant in the market. This paper compares middle size of PV and PTC power plant for the electricity need of Middle East Technical University Northern Cyprus Campus. Based on the maximum hourly demand of METU NCC, both PV and PTC are sized to 3 MWe. The simulations were performed via SAM software using the hourly values from typical meteorological data, which include solar irradiation, wind speed, dry and wet bulb temperatures, relative humidity and pressure. For the PTC and PV plants, commercially available components are used. The scenario assumes METU NCC to be a grid-connected micro-grid with one-way tariff, so that any deficit energy can be met by the utility and any excess energy produced by the suggested renewable energy systems will be given to the grid for free. The results indicate that 3 MW PV plant would generate annual energy of about 4.95 GWh with a capacity factor of 18.9%. These numbers would yield to a LCOE value of 2.60 ¢/kWh. On the other hand, the suggested 3 MW PTC plant with 2 solar multiple would supply about annual energy of 6.3 GWh at a capacity factor of 24.0%. The LCOE of the energy from PTC plant was estimated to be 8.47 ¢/kWh due to high capital and operation cost of PTC plants compared to PV plants. However, over years the cost of PTC power plants has been decreasing. Additionally, both PTC plant and PV plant would consume water only for cleaning purposes that makes them suitable for Cyprus water scarcity conditions. Overall, this study shows pros and cons of middle-sized PV and PTC plants with the case study of METU NCC.   Keywords: economic comparison, levelized cost of energy, parabolic trough, photovoltaic, renewable energy, solar energy


Author(s):  
Duc Tuan Dong ◽  
Wei Cai

Life-cycle assessment has been widely applied in many industry sectors for years and there are some applications of this method in the shipping sector. Fuel consumption and material consumption are considered as crucial factors in the life cycle of ship. This study uses the life-cycle assessment method to show the effects of fuel consumption reduction and light displacement tonnage on the environmental performance of ships. This is done by comparing the environmental impacts of 25 investigated scenarios with different fuel consumption and light displacement tonnage. CML2001 methodology is used to evaluate the impact assessment and the results are calculated using GaBi software. The results show that fuel consumption reduction could cut down the environmental impacts. However, some scenarios are not environmentally beneficial due to the increase in light displacement tonnage. The effects of fuel consumption and light displacement tonnage on 12 CML2001 environmental indicators are different. It is recommended that the life-cycle assessment method should be used to fully assess the environmental impacts of ships before applying any techniques in order to achieve the environmental benefits.


2021 ◽  
Vol 13 (19) ◽  
pp. 10544
Author(s):  
Paolo Bragolusi ◽  
Chiara D’Alpaos

PV energy generates economic and environmental benefits (e.g., energy cost-saving, GHG emissions reduction, etc.), which can be capitalized into market prices. There is, therefore, growing interest in assessing the value that PV systems add to solar homes (i.e., homes equipped with PV production plants) market prices. Although the number of solar homes has experienced rapid growth in Europe and Italy, literature investigating the impact of PV power plants on home values is still very limited. This paper aims to fill this gap. We implement a Discrete Choice Experiment (DCE) approach to estimate individuals’ WTP for different typologies of domestic PV plants, which vary in technical characteristics. Our findings show that homebuyers are willing to pay a price premium for solar homes, ranging from some 3% to some 15%, depending on PV panels’ characteristics. These results can provide a wealth of recommendations to different interested parties such as homeowners, homebuyers, realtors, and governments, seeking knowledge on the capitalization effect of residential PV plants on the housing market to implement cost-effective investment strategies or design optimal policy incentives.


Sign in / Sign up

Export Citation Format

Share Document