scholarly journals Geology, Fluid Inclusion, and H–O–S–Pb Isotope Constraints on the Mineralization of the Xiejiagou Gold Deposit in the Jiaodong Peninsula

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-23 ◽  
Author(s):  
Peng Chai ◽  
Zeng-qian Hou ◽  
Hong-rui Zhang ◽  
Lei-lei Dong
Keyword(s):  
Fluid Inclusion ◽  
Gold Deposit ◽  
Fluid Inclusions ◽  
Gold Mineralization ◽  
Early Stage ◽  
Homogeneous System ◽  
Medium Temperature ◽  
Middle Stage ◽  
Primary Fluid ◽  
Three Stages

The Xiejiagou deposit is a representative medium-sized gold deposit in Jiaodong the Peninsula, which contains gold reserves of 37.5 t. The orebodies are hosted in the Linglong biotite granite with a zircon LA-ICP-MS U–Pb age of 160.5±1.3 Ma (N=15, MSWD=1.2) and are characterized by disseminated- or stockwork-style ores. Mineralization and alteration are structurally controlled by the NE-striking fault. Three stages of mineralization were identified with the early stage being represented by (K-feldspar) sericite quartz pyrite, the middle stage by quartz gold polymetallic sulfide, and the late stage by quartz carbonate. Ore minerals and gold mainly occurred in the middle stage. Three types of primary fluid inclusions were distinguished in the Xiejiagou deposit, including carbonic-aqueous, pure carbonic, and aqueous inclusions. The primary fluid inclusions of the three stages were mainly homogenized at temperatures of 262–386°C, 192–347°C, and 137–231°C, with salinities of 2.22–8.82, 1.02–11.60, and 1.22–7.72 wt% NaCl equivalent, respectively. These data indicate that the initial ore-forming fluids were a medium temperature, CO2-rich, and low-salinity H2O–CO2–NaCl homogeneous system, and the ore-forming system evolved from a CO2-rich mesothermal fluid into a CO2-poor fluid. Considering the fluid inclusion characteristics, H–O–S–Pb isotopes, and regional geological events, the ore-forming fluid reservoir was likely metamorphic in origin. Trapping pressures of the first two hydrothermal stages estimated from the carbonic aqueous inclusion assemblages were ~224–302 MPa and ~191–258 MPa, respectively. This suggests that the gold mineralization of the Xiejiagou gold deposit occurred at a lithostatic depth of ~7.2–9.7 km. Au(HS)2− was the most probable gold-transporting complex at the Xiejiagou deposit. Precipitation of gold was caused by a CO2 effervescence of initial auriferous fluids.

Ore geology, fluid inclusion, and stable isotope constraints on the origin of the Damoqujia gold deposit, Jiaodong Peninsula, China

2020 ◽  
Vol 57 (12) ◽  
pp. 1428-1446
Author(s):  
Peng Chai ◽  
Hong-rui Zhang ◽  
Zeng-qian Hou ◽  
Zhi-yu Zhang ◽  
Lei-lei Dong
Keyword(s):  
Fluid Inclusion ◽  
Gold Deposit ◽  
Eastern China ◽  
Homogeneous System ◽  
Gold Deposition ◽  
Medium Temperature ◽  
Rock Interaction ◽  
Jiaodong Peninsula ◽  
Primary Fluid ◽  
Gold Producer

The Damoqujia gold deposit within the Zhaoping Fault Zone on Jiaodong Peninsula in eastern China is hosted primarily by Mesozoic granitoids and contains >60 t of gold, making it an important gold producer. Three mineralization stages are distinguished (early, middle, and late): (K-feldspar)–sericite–quartz–pyrite, quartz – gold – polymetallic sulfides, and quartz–carbonate. Gold deposition occurred mainly in the middle stage. The primary fluid inclusions of three stages are mainly homogenized at temperatures of 236–389, 191–346, and 104–251 °C, with salinities of 2.96–11.33, 1.39–17.28, and 0.53–11.48 wt.% NaCl equivalent, respectively. Fluid inclusion studies indicate that the metallogenic system evolved from CO2-rich mesothermal homogeneous fluids to CO2-poor aqueous fluids due to inputs of meteoric waters. The gold was carried as a bisulfide complex in the ore-forming fluids. Precipitation of gold was caused by a combination of fluid immiscibility and water–rock interaction. Studies of the fluid inclusion characteristics (medium temperature, CO2-rich, and low salinity H2O–CO2–NaCl homogeneous system), hydrogen and oxygen isotopes ([Formula: see text] = –1.0‰ to 7.6‰, δD = –109‰ to –77‰), sulfur values ([Formula: see text] = 4.5‰ to 8.5‰), and regional geological events show that the ore-forming fluids reservoir was likely metamorphic in origin. Based on the immiscibility of fluid inclusion assemblages, the estimated depth and pressure of trapping are 8.3–10.2 km and 83–276 MPa, respectively, corresponding to the depth and pressure of mineralization.

scholarly journals Ore-Fluid Evolution of the Sizhuang Orogenic Gold Deposit, Jiaodong Peninsula, China

Minerals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 190 ◽  
Author(s):  
Yu-Ji Wei ◽  
Li-Qiang Yang ◽  
Jian-Qiu Feng ◽  
Hao Wang ◽  
Guang-Yao Lv ◽  
...  
Keyword(s):  
Fluid Inclusion ◽  
Gold Deposit ◽  
Late Stage ◽  
Gold Mineralization ◽  
Early Stage ◽  
Main Stage ◽  
Jiaodong Peninsula ◽  
Wide Range ◽  
Homogenization Temperatures

The Sizhuang gold deposit with a proven gold resource of >120 t, located in northwest Jiaodong Peninsula in China, lies in the southern part of the Jiaojia gold belt. Gold mineralization can be divided into altered rock type, auriferous quartz vein type, and sulfide-quartz veinlet in K-feldspar altered granite. According to mineral paragenesis and mineral crosscutting relationships, three stages of metal mineralization can be identified: early stage, main stage, and late stage. Gold mainly occurs in the main stage. The petrography and microthermometry of fluid inclusion shows three types of inclusions (type 1 H2O–CO2 inclusions, type 2 aqueous inclusions, and type 3 CO2 inclusions). Early stage quartz-hosted inclusions have a trapped temperatures range 303–390 °C. The gold-rich main stage contains a fluid-inclusion cluster with both type 1 and 2 inclusions (trapped between 279 and 298 °C), and a wide range of homogenization temperatures of CO2 occurs to the vapor phase (17.6 to 30.5 °C). The late stage calcite only contains type 1 inclusions with homogenization temperatures between 195 and 289 °C. With evidences from the H–O isotope data and the study of water–rock interaction, the metamorphic water of the Jiaodong Group is considered to be the dominating source for the ore-forming fluid. The ore-fluid belonged to a CO2–H2O–NaCl system with medium-low temperature (160–360 °C), medium-low salinity (3.00–11.83 wt% NaCl eq.), and low density (1.51–1.02 g/cm3). Fluid immiscibility caused by pressure fluctuation is the key mechanism in inducing gold mineralization in the Sizhuang gold deposit.

scholarly journals Study on the Microstructure of the Pinctada martensii Pearls and Its Significance

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Wenlong Wu ◽  
Liping Zhang ◽  
Zhijun Yang ◽  
Weisheng Hou
Keyword(s):  
Raman Spectra ◽  
Early Stage ◽  
Formation Processes ◽  
High Quality ◽  
Middle Stage ◽  
Pinctada Martensii ◽  
Medium Quality ◽  
Three Stages ◽  
Last Stage ◽  
Crystalline Plane

The results of a microscopy, SEM-EDS, XRD, FTIR, and Raman spectra study of the nacres of the Pinctada martensii pearls from Zhanjiang city, China shows that they can be classified as the high-quality, medium-quality, and inferior-quality pearls. Aragonite, the main inorganic mineralogy in the nacres, was crystallized and grown up in the compartments formed by the silk and radial organic sheets originating from organic matters secreted by the mantle of mollusks. The crystalline orientations of aragonite tablets were changed from the (002), (012) and (102) crystalline plane nets in the early to the (002) crystalline plane net only in the later. The formation processes of the microstructure of the nacres could be divided into three stages. In the early stage, the precursor particles of aragonite nucleated and grew up fast; then, porous aragonite aggregates consisting of the fine aragonite crystals were formed. In the middle stage, the aragonite crystals directionally grew up to form the aragonite tablets and microlayers. The surface of the aragonite tablets and microlayers are rough and few porous, and the edges of the crystals were serrated. In the last stage, the aragonite tablets in the aragonite microlayer mixed perfectly together to form high-quality aragonite layer whose surface was smooth and perfect.

scholarly journals Genesis of the Koka Gold Deposit in Northwest Eritrea, NE Africa: Constraints from Fluid Inclusions and C-H-O-S Isotopes

2019 ◽  
Author(s):  
Kai Zhao ◽  
Huazhou Yao ◽  
Jianxiong Wang ◽  
Ghebsha Fitwi Ghebretnsae ◽  
Wenshuai Xiang ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Meteoric Water ◽  
Gold Mineralization ◽  
Early Stage ◽  
Gold Deposits ◽  
Orogenic Gold ◽  
Quartz Veins ◽  
Three Phase ◽  
Igneous Origin ◽  
Ne Africa

The Koka gold deposit is located in the Elababu shear zone between the Nakfa terrane and the Adobha Abiy terrane, NW Eritrea. Based on the paragenetic study two main stages of gold mineralization were identified in the Koka gold deposit: 1) an early stage of pyrite-chalcopyrite-sphalerite-galena-gold-quartz vein; and 2) a second stage of pyrite-quartz veins. NaCl-aqueous inclusions, CO2-rich inclusions, and three-phase CO2-H2O inclusions occur in the quartz veins at Koka. The ore-bearing quartz veins formed at 268℃, from NaCl-CO2-H2O(-CH4) fluids averaging 5 wt% NaCl eq. The ore-forming mechanisms include fluid immiscibility during stage I, and mixing with meteoric water during stage II. Oxygen, hydrogen and carbon isotopes suggest that the ore-forming fluids originated as mixtures of metamorphic water, meteoric water and magmatic water, whereas sulfur isotope suggest an igneous origin. Features of geology and ore-forming fluid at Koka deposit are similar to those of orogenic gold deposits, suggesting the Koka deposit might be an orogenic gold deposit related to granite.

scholarly journals Editorial for Special Issue “Fluid Inclusion Characteristic of the Gold Deposit and Its Implication for Ore Genesis”

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 240
Author(s):  
Vsevolod Yu. Prokofiev
Keyword(s):  
Fluid Inclusion ◽  
Gold Deposit ◽  
Fluid Inclusions ◽  
Hydrothermal Fluids ◽  
Special Issue ◽  
Chemical Parameters ◽  
Ore Genesis ◽  
Physical And Chemical Parameters ◽  
Physical And Chemical

Fluid inclusions provide valuable information on the composition and physical and chemical parameters of mineral-forming hydrothermal fluids [...]

scholarly journals Process and Mechanism of Gold Mineralization at the Zhengchong Gold Deposit, Jiangnan Orogenic Belt: Evidence from the Arsenopyrite and Chlorite Mineral Thermometers

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 133 ◽  
Author(s):  
Si-Chen Sun ◽  
Liang Zhang ◽  
Rong-Hua Li ◽  
Ting Wen ◽  
Hao Xu ◽  
...  
Keyword(s):  
Phase Separation ◽  
Gold Deposit ◽  
Native Gold ◽  
Gold Mineralization ◽  
Early Stage ◽  
Orogenic Belt ◽  
Alteration Zone ◽  
Composition Analysis ◽  
Invisible Gold ◽  
Polymetallic Sulfides

The Zhengchong gold deposit, with a proven gold reserve of 19 t, is located in the central part of Jiangnan Orogenic Belt (JOB), South China. The orebodies are dominated by NNE- and NW- trending auriferous pyrite-arsenopyrite-quartz veins and disseminated pyrite-arsenopyrite-sericite-quartz alteration zone, structurally hosted in the Neoproterozoic epimetamorphic terranes. Three stages of hydrothermal alteration and mineralization have been defined at the Zhengchong deposit: (i) Quartz–auriferous arsenopyrite and pyrite; (ii) Quartz–polymetallic sulfides–native gold–minor chlorite; (iii) Barren quartz–calcite vein. Both invisible and native gold occurred at the deposit. Disseminated arsenopyrite and pyrite with invisible gold in them formed at an early stage in the alteration zones have generally undergone syn-mineralization plastic-brittle deformation. This resulted in the generation of hydrothermal quartz, chlorite and sulfides in pressure shadows around the arsenopyrite and the formation of fractures of the arsenopyrite. Meanwhile, the infiltration of the ore-forming fluid carrying Sb, Cu, Zn, As and Au resulted in the precipitation of polymetallic sulfides and free gold. The X-ray elements mapping of arsenopyrite and spot composition analysis of arsenopyrite and chlorite were carried out to constrain the ore-forming physicochemical conditions. The results show that the early arsenopyrite and invisible gold formed at 322–397 °C with lgf(S2) ranging from −10.5 to −6.7. The crack-seal structure of the ores indicates cyclic pressure fluctuations controlled by fault-valve behavior. The dramatic drop of pressure resulted in the phase separation of ore-forming fluids. During the phase separation, the escape of H2S gas caused the decomposition of the gold-hydrosulfide complex, which further resulted in the deposition of the native gold. With the weakening of the gold mineralization, the chlorite formed at 258–274 °C with lgf(O2) of −50.9 to −40.1, as constrained by the results from mineral thermometer.

Hydrothermal zircon and baddeleyite in Val-d'Or Archean mesothermal gold deposits: characteristics, compositions, and fluid-inclusion properties, with implications fortiming of primary gold mineralization

1993 ◽  
Vol 30 (12) ◽  
pp. 2334-2351 ◽  
Author(s):  
Robert Kerrich ◽  
Robert King
Keyword(s):  
Fluid Inclusion ◽  
Gold Mineralization ◽  
Wall Rock ◽  
Gold Deposits ◽  
Southern Volcanic Zone ◽  
Primary Fluid ◽  
Inheritance Model ◽  
Homogenization Temperatures ◽  
Host Rocks

Zircon and baddeleyite occur within quartz–tourmaline veins at four gold deposits in the Val-d'Or district of the Archean Abitibi Southern Volcanic Zone. Host rocks have experienced intense metasomatic enrichment of Zr, Hf, Y, and rare earth elements. The zircons contain primary inclusions of quartz, tourmaline, pyrite, albite, K-mica, scheelite, and gold, and gold occurs in primary fluid inclusions in zircons. Magmatic zircons in host rocks do not have this suite of inclusions; consequently a wall-rock inheritance model for the vein zircons is implausible. Compositionally, the zircons feature pronounced interzone and intergrain variations of Hf, Y, Yb, Th, and U, and sporadic anomalous Ce contents of ~ 1100 ppm, distinct from magmatic counterparts. Two principal types of primary fluid inclusion occur in the vein zircons. Type 1 H2O–CO2 inclusions have low salinities, variable quantities of CO2 and homogenization temperatures of 260–380 °C, and type 2 CO2 rich inclusions contain minor H2O and CH4. The vein zircons coprecipitated at 260–380 °C and ~ 2 kbar (1 kbar = 100 MPa) with coexisting minerals of undisputed hydrothermal origin, such as vein quartz and gold. In the Superior Province, mesothermal gold deposits are related in space and time to translithospheric structures that mark the diachronous accretion of allochthonous subprovinces from north to south between ~ 2710 and 2680 Ma. Consequently, vein zircon ages of ~ 2680 Ma record the primary mineralizing event, whereas aberrantly young ages for rutile, titanite, scheelite, and micas in the same vein systems, that scatter over 2630–2579 Ma, reveal the age of secondary remobilization events.

scholarly journals Carbonic fluids in the Hamadi gold deposit, Sudan: origin and contribution to gold mineralization

2017 ◽  
Vol 54 (5) ◽  
pp. 494-511 ◽  
Author(s):  
Xi-hui Cheng ◽  
Jiu-hua Xu ◽  
Jian-xiong Wang ◽  
Qing-po Xue ◽  
Hui Zhang
Keyword(s):  
Gold Deposit ◽  
Melting Temperature ◽  
Fluid Inclusions ◽  
Gold Mineralization ◽  
Narrow Range ◽  
Shear Zones ◽  
Quartz Veins ◽  
Wide Range ◽  
Homogenization Temperatures ◽  
Gold Bearing

The Hamadi gold deposit is located in North Sudan, and occurs in the Neoproterozoic metamorphic strata of the Arabian–Nubian Shield. Two types of gold mineralization can be discerned: gold-bearing quartz veins and altered rock ores near ductile shear zones. The gold-bearing quartz veins are composed of white to gray quartz associated with small amounts of pyrite and other polymetallic sulfide minerals. Wall-rock alterations include mainly beresitization, epidotization, chloritization, and carbonatization. CO2-rich inclusions are commonly seen in gold-bearing quartz veins and quartz veinlets from gold-bearing altered rocks; these include mainly one-phase carbonic (CO2 ± CH4 ± N2) inclusions and CO2–H2O inclusions with CO2/H2O volumetric ratios of 30% to ∼80%. Laser Raman analysis does not show the H2O peak in carbonic inclusions. In quartz veins, the melting temperature of solid CO2 (Tm,CO2) of carbonic inclusions has a narrow range of −59.6 to −56.8 °C. Carbonic inclusions also have CO2 partial homogenization temperatures (Th,CO2) of −28.3 to +23.7 °C, with most of the values clustering between +4.0 and +20 °C; all of these inclusions are homogenized into the liquid CO2 state. The densities range from 0.73 to 1.03 g/cm3. XCH4 of carbonic fluid inclusions ranges from 0.004 to 0.14, with most XCH4 around 0.05. In CO2–H2O fluid inclusions, Tm,CO2 values are recorded mostly at around −57.5 °C. The melting temperature of clathrate is 3.8–8.9 °C. It is suggested that the lowest trapping pressures of CO2 fluids would be 100 to ∼400 MPa, on the basis of the Th,CO2 of CO2-bearing one-phase (LCO2) inclusions and the total homogenization temperatures (Th,tot) of paragenetic CO2-bearing two-phase (LCO2–LH2O) inclusions. For altered rocks, the Tm,CO2 of the carbonic inclusions has a narrow range of −58.4 to ∼−57.0 °C, whereas the Th,CO2 varies widely (−19 to ∼+29 °C). Most carbonic inclusions and the carbonic phases in the CO2–H2O inclusions are homogenized to liquid CO2 phases, which correspond to densities of 0.70 to ∼1.00 g/cm3. Fluid inclusions in a single fluid inclusion assemblage (FIA) have narrow Tm,CO2 and Th,CO2 values, but they vary widely in different FIAs and non-FIAs, which indicates that there was a wide range of trapping pressure and temperature (P–T) conditions during the ore-forming process in late retrograde metamorphism after the metamorphism peak period. The carbonic inclusions in the Hamadi gold deposit are interpreted to have resulted from unmixing of an originally homogeneous aqueous–carbonic mixture during retrogress metamorphism caused by decreasing P–T conditions. CO2 contributed to gold mineralization by buffering the pH range and increasing the gold concentration in the fluids.

scholarly journals Emeralds from the Delbegetey deposit (Kazakhstan): mineralogical characteristics and fluid-inclusion study

2006 ◽  
Vol 70 (2) ◽  
pp. 159-173 ◽  
Author(s):  
E.V. Gavrilenko ◽  
B. Calvo Pérez ◽  
R. Castroviejo Bolibar ◽  
D. García del Amo
Keyword(s):  
Fluid Inclusion ◽  
Fluid Inclusions ◽  
Isotope Composition ◽  
Aqueous Fluid ◽  
Fluid Inclusion Study ◽  
Refractive Indices ◽  
Mineralogical Characteristics ◽  
Primary Fluid ◽  
Inclusion Study ◽  
Characteristic Features

AbstractThe aim of this study is to provide the first detailed mineralogical and fluid-inclusion description of emeralds from the Delbegetey deposit (Kazakhstan). The characteristic features of Delbegetey emeralds are established: they have dissolution figures on crystal faces, bluish colour and distinct colour zoning; the refractive indices are ω = 1.566–1.570, ε = 1.558–1.562, and the specific gravity is 2.65±0.005, relatively low for natural emeralds; they have very small concentrations of the impurities (Fe, Mg, Na and others) typical of other emeralds, and contain Cr and V; there is a significant preponderance of vapour in fluid inclusions of all types and there is liquid-to-vapour homogenization of primary fluid inclusions (at 395–420°C). The lattice oxygen isotope composition data obtained (δ18O SMOW value of 11.3%o) situate the deposit within the range characteristic of other granite-related emerald deposits. Emerald crystallization took place in low-density (0.40–0.55 g/cm3) aqueous fluid, with the following chemical composition (mol.%): 75.6-97.4 H2O, 0.0-18.4 CO2, 0.0-0.9 CH4, and 4.06-9.65 wt.% NaCl equiv. salinity. According to the calculated isochores, the pressure of formation of the Delbegetey emeralds can be estimated at 570–1240 bar.

The Piteiras emerald mine, Minas Gerais, Brazil: fluid-inclusion and gemmological perspectives

2014 ◽  
Vol 78 (7) ◽  
pp. 1571-1587 ◽  
Author(s):  
E. P. Lynch ◽  
A. Costanzo ◽  
M. Feely ◽  
N. J. F. Blamey ◽  
J. Pironon ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Optical Properties ◽  
Fluid Inclusion ◽  
Fluid Inclusions ◽  
Analytical Techniques ◽  
Minas Gerais ◽  
Mass Spectrometric ◽  
Volatile Species ◽  
Liquid Phases ◽  
Primary Fluid

AbstractNew fluid inclusion analyses using a range of analytical techniques including quadropole mass spectrometric analyses coupled with gemmological investigations were conducted on rough and gemquality faceted emeralds from the Piteiras Mine, Minas Gerais, Brazil. These data complement those of Rondeau et al. (2003) who also presented analyses of the Piteiras emeralds. Emeralds are found typically as euhedral-to-anhedral crystals disseminated in biotite-phlogopite schist and range from 0.5 to 50 mm long. Emerald mineralization is associated closely with alkaline metasomatized pegmatite bodies, quartz boudin and veins, and talc-chlorite bands. Four types of fluid inclusions are recognized in the emeralds. These include aqueous brine and aqueous carbonic varieties containing one or two liquid phases, along with gas bubbles and/or solid crystals (e.g. carbonates). Primary fluid inclusions in emeralds record salinities of ~4–24 eq. wt.% NaCl and minimum trapping temperatures from ~350 to 480ºC. Combined microthermometry, Raman spectroscopy and crush-leach gas analyses indicate that the mineralizing fluid was an aqueous carbonic brine enriched in reduced volatile species such as CH4, N2, H2S and alkanes. With respect to their optical properties (RI ε = 1.573–1.580; RI ω = 1.580–1.588; birefringence = 0.006–0.008) and specific gravity (2.65–2.78), the Piteiras emeralds fall within the expected range for metasomatic, schist-hosted emeralds.

Sign in / Sign up

Export Citation Format

Share Document