scholarly journals Chaotic Phenomena and Nonlinear Responses in a Vibroacoustic System

Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Yiu-Yin Lee
Keyword(s):  
Numerical Integration ◽  
Governing Equation ◽  
Harmonic Balance ◽  
Integration Method ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Numerical Integration Method ◽  
Chaotic Phenomena ◽  
Nonlinear Responses ◽  
Flexible Panel

This study addresses the chaotic phenomena and nonlinear responses in a vibroacoustic system. It is the first study about the chaotic phenomena in a vibroacoustic system, which is formed by a flexible panel coupled with a cavity. A multimode formulation is developed from the acoustic governing equation and nonlinear structural governing equation. The chaotic and various nonlinear responses are computed from the multimode formulation using a numerical integration method. The results obtained from the proposed method and classical harmonic balance method are generally consistent. A set of modal convergence studies is performed to check the proposed method. The effects of various parameters on triggering the nonchaotic responses to chaotic responses in a vibroacoustic system are studied in detail.

Blade Vibration Suppression Using Friction Elements in Shrouding

2011 ◽  
Author(s):  
Michal Hajzˇman ◽  
Miroslav Byrtus ◽  
Vladimi´r Zeman
Keyword(s):  
Numerical Integration ◽  
Nonlinear Equations ◽  
Harmonic Balance ◽  
Vibration Suppression ◽  
Equations Of Motion ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Blade Vibration ◽  
Friction Element ◽  
Nonlinear Equations Of Motion

The problem of two blades with a friction element is studied in order to analyze the effects of the friction on the undesirable vibration suppression. The simplified contact model between friction planes of the blade shrouding and the friction element is derived to be a fast computational tool comparing with a time-consuming finite element solution. The harmonic balance method is suitable for the linearization of originally nonlinear equations of motion under certain assumptions given on the excitation of the system and on its dynamic response. On the other hand the nonlinear equations of motion can be solved directly by their numerical integration, which is more time-consuming but it is not limited by given assumptions. The comparison of results of the harmonic balance method and of the numerical integration of motion equations is given in the paper.

Dynamic Analysis of a Brushless D.C. Motor Using a Modified Harmonic Balance Method

1995 ◽  
Vol 117 (3) ◽  
pp. 283-291 ◽  
Author(s):  
Ming-ran Lee ◽  
Chandramouli Padmanabhan ◽  
Rajendra Singh
Keyword(s):  
Numerical Integration ◽  
Harmonic Balance ◽  
Broad Band ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Time Varying ◽  
Computationally Efficient ◽  
Dynamic Interactions ◽  
Torque Pulsations ◽  
Analytical Approaches

Analysis of brushless D.C. motor (BDCM) torque pulsations is an essential step in the diagnosis and control of vibration and noise generated by many electro-mechanical devices. The broad band spectral content of the torque pulsations, as predicted by a mathematical model which accounts for various complex effects, can often be obtained only by numerical integration which is time consuming while permitting little understanding of the dynamic interactions. Prior analytical approaches, such as the Fourier series technique or the d-q axis theory, are limited by the simplifying assumptions needed to compute the torque spectrum. This paper develops a new semi-analytical formulation for the analysis of nonlinear, time-varying BDCM’s which involve both spatial and temporal domains. A modified multi-term harmonic balance method, based on a transformation of the dual-domain problem to a spatial domain formulation, is developed here specifically to compute the magnitude of several harmonics of the pulsating torque. The interacting effects of key parameters, like dynamic eccentricity, magnetic saturation and open stator slots, on the time-varying inductances and rotor flux density distribution are included explicitly in the formulation. The predicted spectra compare very well with those obtained by direct time domain numerical integration. Yet, the proposed method is computationally efficient especially when the model dimension is reduced. It also provides better insight into the high frequency dynamics of the sample case.

Numerical Integration Method for Stability Analysis of Milling With Variable Spindle Speeds

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Ye Ding ◽  
Jinbo Niu ◽  
LiMin Zhu ◽  
Han Ding
Keyword(s):  
Differential Equation ◽  
Stability Analysis ◽  
Numerical Integration ◽  
Integration Method ◽  
Transcendental Equation ◽  
Spindle Speed ◽  
Machining Parameters ◽  
Numerical Integration Method ◽  
Stability Diagrams ◽  
Time Period

A semi-analytical method is presented in this paper for stability analysis of milling with a variable spindle speed (VSS), periodically modulated around a nominal spindle speed. Taking the regenerative effect into account, the dynamics of the VSS milling is governed by a delay-differential equation (DDE) with time-periodic coefficients and a time-varying delay. By reformulating the original DDE in an integral-equation form, one time period is divided into a series of subintervals. With the aid of numerical integrations, the transition matrix over one time period is then obtained to determine the milling stability by using Floquet theory. On this basis, the stability lobes consisting of critical machining parameters can be calculated. Unlike the constant spindle speed (CSS) milling, the time delay for the VSS is determined by an integral transcendental equation which is accurately calculated with an ordinary differential equation (ODE) based method instead of the formerly adopted approximation expressions. The proposed numerical integration method is verified with high computational efficiency and accuracy by comparing with other methods via a two-degree-of-freedom milling example. With the proposed method, this paper details the influence of modulation parameters on stability diagrams for the VSS milling.

The Numerical Methods of Peridynamics Theory Used in Failure Analysis of Materials

2014 ◽  
Vol 1030-1032 ◽  
pp. 223-227
Author(s):  
Lin Fan ◽  
Song Rong Qian ◽  
Teng Fei Ma
Keyword(s):  
Differential Equation ◽  
Integral Equation ◽  
Numerical Integration ◽  
Integration Method ◽  
Equation Of Motion ◽  
Numerical Integration Method ◽  
Volume Integral ◽  
Volume Integral Equation ◽  
Method Of Molecular Dynamics ◽  
Classic Theory

In order to analysis the force situation of the material which is discontinuity,we can used the new theory called peridynamics to slove it.Peridynamics theory is a new method of molecular dynamics that develops very quickly.Peridynamics theory used the volume integral equation to constructed the model,used the volume integral equation to calculated the PD force in the horizon.So It doesn’t need to assumed the material’s continuity which must assumed that use partial differential equation to formulates the equation of motion. Destruction and the expend of crack which have been included in the peridynamics’ equation of motion.Do not need other additional conditions.In this paper,we introduce the peridynamics theory modeling method and introduce the relations between peridynamics and classic theory of mechanics.We also introduce the numerical integration method of peridynamics.Finally implementation the numerical integration in prototype microelastic brittle material.Through these work to show the advantage of peridynamics to analysis the force situation of the material.

Sign in / Sign up

Export Citation Format

Share Document