scholarly journals Bioinspired Ultra-Low Adhesive Energy Interface for Continuous 3D Printing: Reducing Curing Induced Adhesion

Research ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
L. Wu ◽  
Z. Dong ◽  
H. Du ◽  
C. Li ◽  
N. X. Fang ◽  
...  
Keyword(s):  
3D Printing ◽  
Direct Contact ◽  
Interfacial Adhesion ◽  
Pitcher Plant ◽  
Liquid Resin ◽  
Physical Mechanisms ◽  
Adhesive Energy ◽  
Slippery Surface ◽  
Resin Curing

Additive manufacturing based on liquid resin curing is one of the most promising methods to construct delicate structures. However, precision and speed are limited by the vertical adhesion of in situ cured resin at the curing interface. To overcome the unavoidable adhesion and to develop a general curing interface, we propose a slippery surface taking inspiration of the peristome surface of the pitcher plant. Such surface shows ultra-low adhesive energy at the curing interface due to the inhibition of the direct contact between the cured resin and the solid surface, which also increases the refilling speed of liquid resin. This ultra-low adhesive energy interface is effective for continuous 3D printing and provides insights into the physical mechanisms in reducing vertical solid-solid interfacial adhesion.

A Strategy for Fabricating in Situ Topographical 3D Scaffolds Using 3D Printing and Pluronic F-127

2019 ◽  
Author(s):  
JiUn Lee ◽  
SooJung Chae ◽  
Hyeongjin Lee ◽  
GeunHyung Kim
Keyword(s):  
3D Printing ◽  
3D Scaffolds

scholarly journals Ultrafast Electrohydrodynamic 3D Printing with in situ Jet Speed Monitoring

2021 ◽  
pp. 109791
Author(s):  
Ievgenii Liashenko ◽  
Alberto Ramon ◽  
Andreu Cabot ◽  
Joan Rosell-Llompart
Keyword(s):  
3D Printing

A mechanically robust slippery surface with ‘corn-like’ structures fabricated by in-situ growth of TiO2 on attapulgite

2021 ◽  
Vol 415 ◽  
pp. 128953
Author(s):  
Sicheng Yuan ◽  
Jianwen Peng ◽  
Xiguang Zhang ◽  
Dan Lin ◽  
Haolei Geng ◽  
...  
Keyword(s):  
In Situ Growth ◽  
Slippery Surface

Role of in situ added cellulose nanocrystals as rheological modulator of novel waterborne polyurethane urea for 3D-printing technology

Cellulose ◽  
2021 ◽  
Author(s):  
Julen Vadillo ◽  
Izaskun Larraza ◽  
Tamara Calvo-Correas ◽  
Nagore Gabilondo ◽  
Christophe Derail ◽  
...  
Keyword(s):  
3D Printing ◽  
Cellulose Nanocrystals ◽  
Waterborne Polyurethane ◽  
Printing Technology ◽  
3D Printing Technology

Synthesis and Characterization of Poly(2,5-benzimidazole) (ABPBI) Grafted Carbon Nanotubes

2009 ◽  
Vol 1240 ◽  
Author(s):  
Ji-Ye Kang ◽  
Su-Mi Eo ◽  
Loon-Seng Tan ◽  
Jong-Beom Baek
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Interfacial Adhesion ◽  
Synthesis And Characterization ◽  
Acylation Reaction ◽  
Single Walled Carbon Nanotube ◽  
Mechanical And Electrical Properties ◽  
Multi Walled Carbon Nanotube

AbstractSingle-walled carbon nanotube (SWCNT) and multi-walled carbon nanotube (MWCNT) were functionalized with 3,4-diaminobenzoic acid via “direct” Friedel-Crafts acylation reaction in PPA/P2O5 to afford ortho-diamino-functionalized SWCNT (DIF-SWCNT) and MWCNT (DIF-MWCNT). The resultant DIF-SWCNT and DIF-MWCNT showed improved solubility and dispersibility. To improve interfacial adhesion between CNT and polymer matrix, the grafting of ABPBI onto the surface of DIF-SWCNT (10 wt%) or DIF-MWCNT (10 wt%) was conducted by simple in-situ polymerization of AB monomer, 3,4-diaminobenzoic acid dihydrochloride, in PPA. The resultant ABPBI-g-MWCNT and ABPBI-g-SWCNT showed improved the mechanical and electrical properties.

Interfacial adhesion of nanoporous zeolite thin films

2006 ◽  
Vol 21 (2) ◽  
pp. 505-511 ◽  
Author(s):  
Lili Hu ◽  
Junlan Wang ◽  
Zijian Li ◽  
Shuang Li ◽  
Yushan Yan
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Interfacial Adhesion ◽  
Interfacial Strength ◽  
Future Generation ◽  
In Situ Growth ◽  
Seeded Growth ◽  
Si Substrates ◽  
Film Substrate

Nanoporous silica zeolite thin films are promising candidates for future generation low-dielectric constant (low-k) materials. During the integration with metal interconnects, residual stresses resulting from the packaging processes may cause the low-k thin films to fracture or delaminate from the substrates. To achieve high-quality low-k zeolite thin films, it is important to carefully evaluate their adhesion performance. In this paper, a previously reported laser spallation technique is modified to investigate the interfacial adhesion of zeolite thin film-Si substrate interfaces fabricated using three different methods: spin-on, seeded growth, and in situ growth. The experimental results reported here show that seeded growth generates films with the highest measured adhesion strength (801 ± 68 MPa), followed by the in situ growth (324 ± 17 MPa), then by the spin-on (111 ± 29 MPa). The influence of the deposition method on film–substrate adhesion is discussed. This is the first time that the interfacial strength of zeolite thin films-Si substrates has been quantitatively evaluated. This paper is of great significance for the future applications of low-k zeolite thin film materials.

scholarly journals Tunable In Situ 3D-Printed PVDF-TrFE Piezoelectric Arrays

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5032
Author(s):  
Alec Ikei ◽  
James Wissman ◽  
Kaushik Sampath ◽  
Gregory Yesner ◽  
Syed N. Qadri
Keyword(s):  
3D Printing ◽  
Polyvinylidene Fluoride ◽  
Vinylidene Fluoride ◽  
Mechanical Strain ◽  
Pressure Sensors ◽  
Strain Ratio ◽  
Ex Situ ◽  
Order Of Magnitude ◽  
3D Printed

In the functional 3D-printing field, poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) has been shown to be a more promising choice of material over polyvinylidene fluoride (PVDF), due to its ability to be poled to a high level of piezoelectric performance without a large mechanical strain ratio. In this work, a novel presentation of in situ 3D printing and poling of PVDF-TrFE is shown with a d33 performance of up to 18 pC N−1, more than an order of magnitude larger than previously reported in situ poled polymer piezoelectrics. This finding paves the way forward for pressure sensors with much higher sensitivity and accuracy. In addition, the ability of in situ pole sensors to demonstrate different performance levels is shown in a fully 3D-printed five-element sensor array, accelerating and increasing the design space for complex sensing arrays. The in situ poled sample performance was compared to the performance of samples prepared through an ex situ corona poling process.

Sign in / Sign up

Export Citation Format

Share Document