scholarly journals Molecular Association Studies on Polyvinyl Alcohol at Different Concentrations

2018 ◽  
Vol 2018 ◽  
pp. 1-5
Author(s):  
Richa Saxena ◽  
S. C. Bhatt
Keyword(s):  
Relaxation Time ◽  
Polyvinyl Alcohol ◽  
Acoustic Impedance ◽  
Association Studies ◽  
Adiabatic Compressibility ◽  
Ultrasonic Velocities ◽  
Acoustical Parameters ◽  
Solvent Interaction ◽  
Intermolecular Free Length ◽  
Solute Solvent Interaction

Ultrasonic velocities, densities, and viscosities have been measured for the solution of polyvinyl alcohol in water at concentration range of 0.3% to 1% at temperature 35°C. Ultrasonic velocities have been measured using variable path ultrasonic interferometer at 1 MHz frequency. The acoustical parameters like adiabatic compressibility, acoustic impedance, intermolecular free length, and relaxation time have been calculated by using above-mentioned values of ultrasonic velocities, densities, and viscosities. The variation of these acoustical parameters is explained in terms of solute-solvent interaction in a polymer solution.

scholarly journals Acustical Studies of Interactions in the Binary Mixtures of Ethylmethyl Ketone (EMK) and N,N-Dimethylformamide (DMF) through Ultrasonic Measurements at Different Temperatures

2015 ◽  
Vol 47 ◽  
pp. 120-132
Author(s):  
Baljeet Singh Patial
Keyword(s):  
Relaxation Time ◽  
Internal Pressure ◽  
Acoustic Impedance ◽  
Adiabatic Compressibility ◽  
Ultrasonic Velocities ◽  
Intermolecular Free Length ◽  
Acoustical Parameter ◽  
Wada’S Constant ◽  
Ultrasonic Measurements ◽  
Different Temperatures

Ultrasonic velocities (u), densities (ρ) and viscosities (η) are measured in respect of ethylmethylketone (EMK) and N,N-dimethylformamide (DMF) over the entire composition at 298, 308and 318K. Attempt have been made to extract the information with respect to various kind of intermolecular interactions, such as H-bonding, dipole-dipole, solute –solvent, dispersion type interactions existing between these two components from the following acoustical parameter when examined as a function of solvent composition at different temperatures: adiabatic compressibility (β), specific acoustic impedance (Z), intermolecular free length (Lf), molar sound velocity (Rm), wada’s constant (W), viscous relaxation time (τ), free volume and internal pressure (πi).

scholarly journals Acoustical Parameters of Polyvinyl Alcohol

2021 ◽  
Vol 16 (2) ◽  
Author(s):  
Richa Saxena ◽  
S C Bhatt ◽  
Manish Uniyal ◽  
S C Nautiyal
Keyword(s):  
Aqueous Solution ◽  
Molecular Weight ◽  
Relaxation Time ◽  
Polyvinyl Alcohol ◽  
Ultrasonic Velocity ◽  
Adiabatic Compressibility ◽  
Acoustical Parameters ◽  
Intermolecular Free Length ◽  
Different Temperatures ◽  
Ultrasonic Investigation

Ultrasonic investigation provides a wealth of information in understanding the intermolecular interaction of solute and solvent. An attempt has been made to measure density, viscosity and ultrasonic velocity of aqueous solution of polyvinyl alcohol of molecular weight approximately 140,000 at different temperatures 35οC, 40oC, 45οC, 50oC, 55οC, 60oC, 65οC at 0.8% concentration. Ultrasonic velocity is measured using ultrasonic interferometer at 1 MHz frequency. The acoustical parameters like, adiabatic compressibility, acoustic impedance, intermolecular free length and relaxation time have been calculated at different temperatures. These parameters were used to understand the behaviour of solute and solvent.

scholarly journals Density, Viscosity and Ultrasonic Velocity of Polyethylene Glycol

2021 ◽  
Vol 16 (2) ◽  
Author(s):  
Richa Saxena ◽  
SC Bhatt ◽  
Manish Uniyal ◽  
S C Nautiyal
Keyword(s):  
Relaxation Time ◽  
Polyethylene Glycol ◽  
Polymer Solution ◽  
Ultrasonic Velocity ◽  
Acoustic Impedance ◽  
Adiabatic Compressibility ◽  
Acoustical Parameters ◽  
Free Length ◽  
Intermolecular Free Length ◽  
Ultrasonic Interferometer

Ultrasonic velocity, density, and viscosity of polyethylene glycol have been measured for the solution in water at concentration range of 0.3% to 1% at temperature 50oC. Ultrasonic velocity has been measured using ultrasonic interferometer at 1MHz frequency. By using the values of ultrasonic velocity, density, and viscosity, various acoustical parameters like adiabatic compressibility, acoustic impedance, intermolecular free length, and relaxation time have been calculated. The change in these acoustical parameters is explained in terms of solutesolvent interaction in a polymer solution.

scholarly journals Study of Acoustic Nature of Tetrapentylammonium Bromide in N,N-Dimethyl-Ethylmethyl Ketone Systems at Different Temperatures

2015 ◽  
Vol 48 ◽  
pp. 103-113
Author(s):  
Baljeet Singh Patial
Keyword(s):  
Relaxation Time ◽  
Internal Pressure ◽  
Ultrasonic Velocity ◽  
Acoustic Impedance ◽  
Adiabatic Compressibility ◽  
Solvent Mixtures ◽  
Density Data ◽  
Solvent Interactions ◽  
Intermolecular Free Length ◽  
Different Temperatures

Ultrasonic velocity, viscosity and density studies on solution of tetrapentylammonium bromide (Pen4NBr) in N,N-dimethylformamide, ethylmethylketone (EMK) and DMF-EMK solvent mixtures containing 0, 20, 40, 60, 80 and 100 mol % of DMF at 298, 308 and 318K have been reported. From the velocity, viscosity and density data values, various parameters namely, the adiabatic compressibility (β), Intermolecular free length (Lf), specific acoustic impedance (Z), free volume (Vf), internal pressure (πi) and relaxation time (τ) have been calculated. All these parameters have been discussed separately to throw light on the solute-solvent and solvent-solvent interactions.

scholarly journals Molecular Interaction Studies on N-Alkanols with DMA in Toluene at 303K

2010 ◽  
Vol 7 (2) ◽  
pp. 465-472 ◽  
Author(s):  
S. Thirumaran ◽  
J. Earnest Jayakumar ◽  
B. Hubert Dhanasundaram
Keyword(s):  
Experimental Data ◽  
Molecular Interactions ◽  
Acoustic Impedance ◽  
Molecular Interaction ◽  
Adiabatic Compressibility ◽  
Molecular Association ◽  
Acoustical Parameters ◽  
Intermolecular Free Length ◽  
Dimethyl Acetamide ◽  
Hydrogen Bonded

The ultrasonic study of velocity, density and viscosity has been measured for the mixtures ofn-alkanols, namely; 1-propoanol, 1-butanol and 1-pentanol in toluene withN-Ndimethyl acetamide (DMA) at 303K. The experimental data have been used to calculate the acoustical parameters such as adiabatic compressibility (β), intermolecular free length (Lf), free volume (Vf), internal pressure (πi) and acoustic impedance (Z). The excess values of the above parameters have also been evaluated and presented. From the present investigation, it is obvious that a weak molecular association was identified. Mixing of DMA withnalkanols causes dissociation of hydrogen bonded structures ofn- alkanols. Also, further addition of DMA with the mixture not only causes dissociation of hydrogen bonded structures ofn-alkanols but also a decrease in molecular association between toluene andn-alkanols is observed. The evaluated excess values predict weak molecular interactions existing between DMA-n-alkanols as well as toluene-n-alkanols.

THERMO PHYSICAL PROPERTIES OF TERNARY MIXTURES OF 1-HEXANOL/1- OCTANOL CONTAINING N-N-DIMETHYLFORMAMIDE AND TOLUENE AT 303.15 K

2021 ◽  
pp. 41-43
Author(s):  
T. Sumathi
Keyword(s):  
Experimental Data ◽  
Molecular Interactions ◽  
Acoustic Impedance ◽  
Composition Range ◽  
Adiabatic Compressibility ◽  
Ternary Mixtures ◽  
Acoustical Parameters ◽  
Free Length ◽  
Intermolecular Free Length ◽  
Thermo Physical Properties

In the present work, ultrasonic velocity (u), viscosity (η) and density (ρ) of ternary mixtures of 1-hexonal and 1-octanol with dimethylformamide in toluene at 303.15 K have been measured over the entire composition range. From the experimental data, acoustical parameters such as adiabatic compressibility (β), intermolecular free length (L ), free volume (V ), acoustic impedance (Z), excess adiabatic compressibility , excess free length , excess free f f E E (b ) (L )f volume and excess acoustic impedance have been computed. The variation of these properties with composition are E E (V ) (Z ) f discussed in terms of molecular interactions between unlike molecules of the mixtures.

scholarly journals Ultrasonic Studies on Binary Mixtures of Acetyl Acetone at 301K

2011 ◽  
Vol 8 (3) ◽  
pp. 1094-1101 ◽  
Author(s):  
Shaik Babu ◽  
A. Radhakrishna Murthy
Keyword(s):  
Relaxation Time ◽  
Internal Pressure ◽  
Binary Mixtures ◽  
Ultrasonic Velocity ◽  
Molecular Interactions ◽  
Acoustic Impedance ◽  
Adiabatic Compressibility ◽  
Isoamyl Alcohol ◽  
Acoustical Parameters ◽  
Acetyl Acetone

The ultrasonic velocity (U), density (ρ) and viscosity (η) measurements have been carried out for the binary mixtures of acetyl acetone with benzene, carbon tetra chloride and isoamyl alcohol at 301 K. From the measured values of ultrasonic velocity, density and viscosity, parameters such as internal pressure (πi), free volume (Vƒ) and acoustical parameters such as adiabatic compressibility (β), inter molecular free length (Lƒ), acoustic impedance (Z), relaxation time (τ) have been calculated. The results have been analyzed and interpreted in terms of molecular interactions.

scholarly journals Ultrasonic Studies of Some Biomolecules in Aqueous Guanidine Hydrochloride Solutions at 298.15 K

2011 ◽  
Vol 8 (3) ◽  
pp. 1146-1151
Author(s):  
R. Palani ◽  
A. Geetha ◽  
S. V. S. L. Poornima
Keyword(s):  
Experimental Data ◽  
Guanidine Hydrochloride ◽  
Hydration Number ◽  
Adiabatic Compressibility ◽  
Apparent Molal Volume ◽  
Acoustical Parameters ◽  
Molal Volume ◽  
Solvent Interaction ◽  
Solute Solvent Interaction ◽  
Apparent Molal Compressibility

Ultrasonic velocity (U), viscocity (η) and density (ρ) ofL- ascorbic acid, dextrose and sucrose in aqueous guanidine hydrochloride (0.3 m) have been measured at 298.15 K. The derived acoustical parameters namely adiabatic compressibility (β), apparent molal compressibility (ΨK) apparent molal volume (ΨV) limiting apparent molal compressibility (Ψ0K) limiting apparent molal volume (Ψ0V) and their constants (SK, Sv) and viscosityB- coefficient and hydration number (nH) have been computed from the experimental data. The variation of these parameters with respect to the molality of solutes have been explained on the basis of solute-solvent interaction and structure making tendency of the solutes in solvents.

scholarly journals Acoustical Studies on Molecular Interaction of 1,3,4-Pyrazoline Derivatives Using Ultrasonic Technique at 303.15 K

2014 ◽  
Vol 39 ◽  
pp. 100-115
Author(s):  
A. Raguraman ◽  
N. Santhi
Keyword(s):  
Relaxation Time ◽  
Molecular Interactions ◽  
Acoustic Impedance ◽  
Molecular Interaction ◽  
Adiabatic Compressibility ◽  
Liquid Mixtures ◽  
Ultrasonic Technique ◽  
Acoustical Parameters ◽  
Binary Liquid ◽  
Rao’S Constant

The acoustical parameters for the binary liquid mixtures containing Pyrazoline derivatives in DMF have been estimated at 303.15 K, from the measured values of ultrasonic velocity (U), density (ρ) and viscosity (η). From these data some of acoustical parameters such as adiabatic compressibility (β), free length (Lf), acoustic impedance (Z), Rao’s constant (R), molar compressibility (W), relaxation time (τ), free volume (Vf) and internal pressure (πi), etc., have been computed using the standard relations. The results have been discussed in terms of molecular interactions.

scholarly journals Ultrasonic study of molecular interactions in binary mixtures of methyl methacrylate(MMA) with toluene and dimethylacetamide at 318 K

2016 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
R.G. Indhumathi
Keyword(s):  
Methyl Methacrylate ◽  
Binary Systems ◽  
Adiabatic Compressibility ◽  
Acoustical Parameters ◽  
Binary Solutions ◽  
Intermolecular Free Length ◽  
Wada’S Constant ◽  
Ultrasonic Measurements ◽  
Rao’S Constant ◽  
First Time

<p>The ultrasonic velocity, density and viscosity at 318K have been measured in the binary systems of Methyl methacrylate + Toluene and Methyl methacrylate + Dimethylacetamide. In this work an attempt has been made for the first time to investigate the behavior of binary solutions of Methylmethacrylate(MMA) in Toluene and Dimethylacetamide(DMAC) with regard to acoustical parameters such as adiabatic compressibility(β), intermolecular free length(l<sub>f</sub>), free volume(V<sub>f</sub>), Rao’s constant(R), Wada’s constant(W) and specific acoustical impedance(Z) from ultrasonic measurements at 318 K were calculated. The results are interpreted in terms of molecular interaction between the components of mixtures.</p>

Sign in / Sign up

Export Citation Format

Share Document