scholarly journals Effects of Two DifferentPozolePreparation Processes on Quality Variables and Pasting Properties of Processed Maize Grain

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
María Gricelda Vázquez-Carrillo ◽  
David Santiago-Ramos ◽  
Edith Domínguez-Rendón ◽  
Marco Antonio Audelo-Benites
Keyword(s):  
Dry Matter ◽  
Pasting Properties ◽  
Maize Starch ◽  
Time To Peak ◽  
Dry Matter Loss ◽  
Naoh Solution ◽  
Maize Landraces ◽  
Pasting Temperature ◽  
Maize Grain ◽  
Soft Grains

The effects of two differentpozolepreparation processes, traditional (TP) and industrial (IP), on quality variables, chemical composition, and pasting properties of processed grain of nine maize landraces were evaluated. Nixtamalization and steeping time in TP (~15 h) allowed more water absorption resulting in higher moisture content as well as softer debranned nixtamal relative to the debranned nixtamal produced by IP (52 min). Steeping in TP and bleaching in IP increased the pasting temperature, peak viscosity, and time to peak viscosity of maize starch. Flowering time was shorter in IP (<120 min) than in TP (>120 min) and was significantly affected by the hardness of debranned nixtamal and bleached precooked grains. Total dry matter loss was higher in IP (>10.5%) than in TP (<5.0%), mainly due to the complete elimination of pedicel and pericarp by the Ca(OH)2+ NaOH solution during cooking. Soft grains, with low test weight, a high proportion of floury endosperm, and high peak viscosity, are required to obtain higher yield of bleached precooked grains and soft flowered grains in both processes.

Machine learning algorithms to predict the dry matter loss of stored soybean grains ( Glycine max L.)

2021 ◽  
Author(s):  
Juliana Soares Zeymer ◽  
Felipe Guzzo ◽  
Marcos Eduardo Viana Araujo ◽  
Richard Stephen Gates ◽  
Paulo Cesar Corrêa ◽  
...  
Keyword(s):  
Machine Learning ◽  
Glycine Max ◽  
Dry Matter ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Dry Matter Loss ◽  
Glycine Max L

scholarly journals Evaluation of improved cassava genotypes for yield and related traits for a better breeding strategy under different agroecologies in Nigeria

Euphytica ◽  
2021 ◽  
Vol 217 (4) ◽  
Author(s):  
N. A. Adetoro ◽  
O. O. Oworu ◽  
A. L. Nassir ◽  
A. Bello ◽  
E. Parkes ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Pasting Properties ◽  
Growth And Yield ◽  
Root Weight ◽  
Root Yield ◽  
Root Characteristics ◽  
Stay Green ◽  
Fresh Root

AbstractThis study aimed at determining shoot and root characteristics of cassava as affected by root yield and the influence of soil moisture on vegetative growth and yield. Thirty cassava genotypes were evaluated for morphological and physiological characterization in three locations in Nigeria: Ibadan, Mokwa and Zaria. Randomized complete block design was used with four replicates. Studies on the pasting properties of the genotypes were also carried out. Data were collected on plant height, stem girth, stay-green ability, garri and fresh root weight. Genotypes differed significantly (P < 0.05) across and within locations for shoot and root characteristics. Across locations, genotype 011663 had the highest plant height (132.4 cm); 30572 had the largest stem girth (8.6 cm); and 010040 was the best stay-green (2.2). Genotype 011086 had the highest number of roots per plot (95.7), 950289 had the highest fresh root yield (24.3 t/ha), and 990554 had the highest percentage of dry matter (35.2). Trends in root yields across locations were Ibadan (28.9 t/ha), Mokwa (20.3 t/ha), and Zaria (8 t/ha). Five genotypes IITA-TMS-IBA950289, 010034, 990554, 011807, and 980581 had negligible interactions with the environment and so have broad adaptation and are considered stable; and two clones 011807 and 950166 were found to be the best for pasting properties. Breeding strategies that consider root size, total root number, harvest index, dry matter, with applications for household foods and industrial uses, will be an effective and efficient way to select genotypes for high yield.

scholarly journals Effects of Fermented Maize Residue Addition on the Physico-chemical and Sensory Properties of Chin-Chin

2021 ◽  
pp. 65-73
Author(s):  
Owuno Friday ◽  
Achinewu Simeon Chituru
Keyword(s):  
Proximate Composition ◽  
Protein Digestibility ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Significant Difference ◽  
Pasting Temperature

Chin-Chin, a traditional Nigerian snack was prepared utilizing wheat-fermented maize residue composite flour at 0 – 30% replacement levels. Effects of this addition on the functional and pasting properties of the flour composite was evaluated. The snack produced was also evaluated for its sensory attributes, proximate composition and invitro-protein digestibility (IVPD). Functional properties results showed an increase in water absorption capacity (WAC), a decrease in oil absorption capacity (OAC), decrease in Bulk Density (BD), swelling power and solubility index with residue addition. Pasting property results showed a drop in the value of peak, trough, breakdown and final viscosity with substitution while set back viscosity increased.Peak temperature decreased, but values for pasting temperature showed no significant difference between the control and the blends. Results for sensory evaluation showed equal preference for overall acceptability. Proximate composition results showed residue addition led to an increase in crude fibre and protein content with a drop in the carbohydrate value. Residue addition did not increase protein digestibility. Addition of fermented maize residue in chin-chin production can be another way of utilizing the fibre rich by-product of the production of fermented maize starch.

scholarly journals Functional and pasting characteristics of pupuru and pupuru analogues from cassava (Manihot esculenta) and breadfruit (Artocarpus altilis) blends

2020 ◽  
Vol 13 (1) ◽  
pp. 51-68
Author(s):  
O. F. Akinyele ◽  
A. V. Ikujenlola ◽  
T. O. Omobuwajo
Keyword(s):  
Water Absorption ◽  
Manihot Esculenta ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Peak Time ◽  
Standard Methods ◽  
Artocarpus Altilis ◽  
Swelling Power ◽  
Pasting Characteristics ◽  
Pasting Temperature

Abstract Pupuru and pupuru analogues are fermented, smoked food products usually produced from cassava or cassava substituted with a varying ratio of breadfruit. This study aims at determining and comparing the functional and pasting characteristics of pupuru and pupuru analogues with a view to expanding the utilization of breadfruit as pupuru analogue. The functional properties (water absorption capacity (%), swelling power (g/g), solubility (%)) and pasting characteristics were determined using standard methods. The results showed that the yield of the products ranged between 24.66 and 29.65%, and it was not affected by the amount of breadfruit substituted. The water absorption capacities of the pupuru and pupuru analogues ranged between 216.0 and 449.0%; this parameter increased with temperature increase. Both swelling power and solubility had a rapid increase from 80 °C to 90 °C. Pasting temperature ranged between 73.15 and 83.66 °C, with peak time between 4.58 and 5.33 min. The final viscosity ranged between 94.08 and 391.83 RVU, and it decreased with increase in breadfruit substitution. The study concluded that adding breadfruit to cassava in pupuru analogue production improved some of the functional and pasting properties of the product.

scholarly journals Effect of Watermelon Rind (Citrullus lanatus) Addition on the Functional, Pasting and Microbiological Quality of Sorghum Based Mumu

2019 ◽  
pp. 72-83
Author(s):  
Stephen T. Gbaa ◽  
Samuel A. Ahemen ◽  
Christiana O. Ameh
Keyword(s):  
Citrullus Lanatus ◽  
Microbiological Quality ◽  
Pasting Properties ◽  
Viable Count ◽  
Sorghum Flour ◽  
Watermelon Rind ◽  
Microbial Analysis ◽  
Pasting Temperature ◽  
Powder Addition

The effect of watermelon rind powder addition on the functional, pasting and microbiological quality of Sorghum based mumu was evaluated. Sorghum-based mumu was prepared from composite flours of 85:15, 75:15, 70:15 and 65:15% roasted sorghum flour and roasted partially defatted groundnut flour respectively and included with 0, 10, 15 and 20% watermelon rind powder respectively which were known as sample A, B, C and D accordingly. Subsequently, the functional, pasting properties and microbial quality was assessed. Functional properties values; Bulk density (0.89 to 0.80mg/100g), reconstitution index (4.99 to 4.89) and swelling index (2.35 to 2.20) decreased significantly (p < 0.05) with increase in watermelon powder addition while water absorption (10.36 to 10.97g/g), oil absorption (10.33 to 10.79) and foam capacities (12.46 to 13.85%) increased with increase in watermelon rind powder.  The pasting properties; peak (302.22 to 292.44 RVU), trough (156.44 to 150.00 RVU) and Final viscosities (412.69 to 400.76RVU), and breakdown (149.95 to 140.59RVU) decreased significantly (p < 0.05) with increased in watermelon rind powder while setback viscosity (101.05 to 115.59RVU), pasting temperature (59.32 to 62.02oC) and pasting time (4.93 to 5.13mins) increased. Microbial analysis revealed the following ranges: Total viable count, 0.5x102 to1.0x102 cfu/g, fungi count of 6.1x101- 9.9x101 cfu/g and no coliform was detected. Overall, addition of watermelon rind powder showed good functional, pasting and microbiological qualities of sorghum based mumu.

Wheat–millet flour cookies: Physical, textural, sensory attributes and antioxidant potential

2019 ◽  
Vol 26 (4) ◽  
pp. 311-320 ◽  
Author(s):  
S Hussain ◽  
AA Mohamed ◽  
MS Alamri ◽  
MA Ibraheem ◽  
Akram A Abdo Qasem ◽  
...  
Keyword(s):  
Gallic Acid ◽  
Wheat Flour ◽  
Pasting Properties ◽  
Gluten Free ◽  
Phenolic Contents ◽  
Health Promoting ◽  
Physical Attributes ◽  
Pasting Temperature ◽  
Technical Properties ◽  
Flour Blends

Millet flour (water washed or alkali washed) was replaced with wheat flour (WF) at 0, 25, 50, 75, and 100% levels. Objectives of the research were to characterize the flour blends for their technical properties and to produce cookies with less or no gluten contents. All types of flour blends were evaluated for their pasting properties. The cookies were baked and evaluated for their textural and physical attributes. Inclusion of millet flour (both types) in wheat flour resulted in significant reduction in peak and final viscosities while setback viscosities were affected non-significantly. Pasting temperature was increased from 65 ℃ (100% wheat flour) to 91 ℃ (100% millet flour). The hardness of cookies was reduced in the presence of millet flour. Fracturability values of cookies with higher millet flour were higher as compared to control cookies (prepared from 100% wheat flour). Cookies prepared from blends having more that 50% millet flour were not much liked by sensory panelists. The phenolic contents of cookies containing higher levels of either water washed or alkali washed millet flour were found to be higher when compared to cookies prepared from plain WF (1.90 ± 0.14 mg gallic acid/g sample). The 2,2-diphenyl-1-picrylhydrazyl activity (%) of cookies ranged from 16.39 ± 0.34 (100% water washed millet flour) to 10.39 ± 0.26 (100% WF; control). The study will help the non-coeliac people to consume low gluten (≈1.6–6.5%) or gluten intolerant people to consume gluten-free cookies (0%) from millet flour having abundant of antioxidants and health-promoting polyphenols.

scholarly journals Characterization of Striga-Resistant Yellow-Orange Maize Hybrids for Bioactive, Carbohydrate, and Pasting Properties

2020 ◽  
Vol 4 ◽  
Author(s):  
Abdulazeez Olamilekan Elemosho ◽  
Emmanuel Anyachukwu Irondi ◽  
Emmanuel Oladeji Alamu ◽  
Emmanuel Oladipipo Ajani ◽  
Busie Maziya-Dixon ◽  
...  
Keyword(s):  
Pasting Properties ◽  
Free Sugar ◽  
Bioactive Constituents ◽  
Potential Health ◽  
Maize Hybrids ◽  
Yellow Orange ◽  
Food Applications ◽  
Pasting Temperature ◽  
Β Carotene

Understanding the bioactive constituents and physicochemical components in cereals can provide insights into their potential health benefits and food applications. This study evaluated some bioactive constituents, carbohydrate profiles and pasting properties of 16 Striga-resistant hybrids, with yellow-orange kernel color and semi-flint to flint kernel texture, grown in two replications at two field locations in Nigeria. Carotenoids were quantified using HPLC, while other analyses were carried out using standard laboratory methods. The ranges of major carotenoids (μg/g) across the two locations varied from 2.6 to 9.6 for lutein, from 2.1 to 9.7 for zeaxanthin, from 0.8 to 2.9 for β-cryptoxanthin, from 1.4 to 4.1 for β-carotene; with total xanthophylls and provitamin A carotenoids (pVAC) ranging from 5.4 to 17.1 and 1.4 to 4.1 μg/g, respectively. Tannins content ranged from 2.1 to 7.3 mg/g, while phytate ranged from 0.4 to 7.1%. Starch, free sugar, amylose and amylopectin ranged from 40.1 to 88.9%, 1.09 to 6.5%, 15.0 to 34.1%, and 65.9 to 85.0%, respectively. Peak and final viscosities ranged from 57.8 to 114.9 and 120.3 to 261.6 Rapid Visco Units (RVU), respectively. Total xanthophylls, β-carotene, tannins, phytate, sugar, amylose and amylopectin levels, as well as peak and final viscosities, varied significantly (p &lt; 0.05) across the hybrids. Amylose was significantly correlated (p &lt; 0.05) with total xanthophylls, β-carotene, pVAC, phytate and pasting temperature (r = 0.3, 0.3, 0.4, 0.3, 0.3, respectively), but starch significantly correlated with tannins (r = 0.3). Hence, the Striga-resistant yellow-orange maize hybrids have a good combination of bioactive constituents, carbohydrate profile and pasting properties, which are partly influenced by hybrid.

Caecotrophes intake in growing rabbits estimated either from urinary excretion of purine derivatives or from direct measurement using animals provided with a neck collar: effect of type and level of dietary carbohydrate

2002 ◽  
Vol 74 (1) ◽  
pp. 135-144 ◽  
Author(s):  
A. Belenguer ◽  
J. Balcells ◽  
M. Fondevila ◽  
C. Torre
Keyword(s):  
Growth Rate ◽  
Dry Matter ◽  
Dry Matter Intake ◽  
Purine Derivatives ◽  
Lower Growth ◽  
Beet Pulp ◽  
Lower Growth Rate ◽  
Maize Grain ◽  
G Ratio ◽  
Microbial N

AbstractThe present study compares estimates of caecotrophes production from urinary purine derivatives (PD) excretion with that from preventing caecotrophy by using a neck collar. A total of 64 New Zealand growing male rabbits were used to study the effect of diet composition on caecotrophes production. Diets were formulated using two sources of structural carbohydrates (fibre): alfalfa hay (AH) and sugar-beet pulp (SBP), mixed at two constant proportions, (0·75: 0·25) AH diets and (0·25: 0·75) SBP diets. Both diets included either barley or maize grain at two fibre: grain ratios (F/G, 80: 20 and 45: 55). Diets were given ad libitum. Growth rate, dry matter intake and digestibility were not modified by the grain source, although high F/G diets resulted in a lower growth rate (19·8 v. 26·4 g/day; P < 0·001). Between fibre sources, dry-matter intake and growth were higher in AH than in SBP diets (122·5 and 25·6 v. 101·6 and 20·4 g/day, respectively, P < 0·001 and P < 0·01). Rabbits given high F/G ratio and AH diets excreted more caecotrophes than those given low F/G ratio and SBP diets (19·5 and 20·9 v. 16·3 and 14·85 g/day, respectively). Microbial-N recycling through the caecotrophy process was higher when considering data from PD excretion (1·33 g/d) than when estimated by preventing caecotrophy (0·72 g/day).

scholarly journals The Compositional and Functional Attributes of Commercial Flours from Tropical Fruits (Breadfruit and Banana)

Foods ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 586 ◽  
Author(s):  
Shiqi Huang ◽  
Mario M. Martinez ◽  
Benjamin M. Bohrer
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Dry Matter ◽  
Pasting Properties ◽  
Processed Food ◽  
Tropical Fruit ◽  
Swelling Power ◽  
Functional Attributes ◽  
Banana Flour ◽  
Water Holding

The objective of this study was to compare the compositional and functional properties of tropical flour sources (two breadfruit flours (type A and type B) and a banana flour) with a more traditional flour source (wheat flour). Macro-nutrient composition, pH, water and oil holding capacity, bulk density, particle size, solubility, swelling power, pasting properties, and thermodynamics (gelatinization and retrogradation) were determined. All flours evaluated were similar in their composition with high levels of carbohydrates (greater than 82.52 g/100 g on a dry-matter basis), with most of the carbohydrate content comprised of starch (greater than 67.02 g/100 g). The tropical fruit flours had greater (p < 0.05) water holding capacity than wheat flour. Breadfruit flour B had the lowest (p < 0.05) bulk density, while banana flour had the greatest (p < 0.05) bulk density. The swelling power of the tropical flours was greater (p < 0.05) than the wheat flour. The viscosity of the tropical flours was higher than wheat flour but decreased significantly when temperature was held at 130 °C. These results indicated that the two breadfruit flours and banana flour have great potential for application in processed food products, and have similar compositional attributes to a more traditional flour.

Sign in / Sign up

Export Citation Format

Share Document