scholarly journals Influence of the Microstructure and Silver Content on Degradation, Cytocompatibility, and Antibacterial Properties of Magnesium-Silver Alloys In Vitro

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Zhidan Liu ◽  
Ronald Schade ◽  
Bérengère Luthringer ◽  
Norbert Hort ◽  
Holger Rothe ◽  
...  
Keyword(s):  
Degradation Rate ◽  
Silver Content ◽  
Antibacterial Properties ◽  
Dynamic Environment ◽  
Orthopedic Implants ◽  
Dynamic Conditions ◽  
Primary Osteoblasts ◽  
Human Primary Osteoblasts ◽  
Silver Metal

Implantation is a frequent procedure in orthopedic surgery, particularly in the aging population. However, it possesses the risk of infection and biofilm formation at the surgical site. This can cause unnecessary suffering to patients and burden on the healthcare system. Pure Mg, as a promising metal for biodegradable orthopedic implants, exhibits some antibacterial effects due to the alkaline pH produced during degradation. However, this antibacterial effect may not be sufficient in a dynamic environment, for example, the human body. The aim of this study was to increase the antibacterial properties under harsh and dynamic conditions by alloying silver metal with pure Mg as much as possible. Meanwhile, the Mg-Ag alloys should not show obvious cytotoxicity to human primary osteoblasts. Therefore, we studied the influence of the microstructure and the silver content on the degradation behavior, cytocompatibility, and antibacterial properties of Mg-Ag alloys in vitro. The results indicated that a higher silver content can increase the degradation rate of Mg-Ag alloys. However, the degradation rate could be reduced by eliminating the precipitates in the Mg-Ag alloys via T4 treatment. By controlling the microstructure and increasing the silver content, Mg-Ag alloys obtained good antibacterial properties in harsh and dynamic conditions but had almost equivalent cytocompatibility to human primary osteoblasts as pure Mg.

scholarly journals Multifunctional Properties of Quercitrin-Coated Porous Ti-6Al-4V Implants for Orthopaedic Applications Assessed In Vitro

2020 ◽  
Vol 9 (3) ◽  
pp. 855 ◽  
Author(s):  
Maria Antonia Llopis-Grimalt ◽  
Aina Arbós ◽  
Maria Gil-Mir ◽  
Aleksandra Mosur ◽  
Prathamesh Kulkarni ◽  
...  
Keyword(s):  
Cell Adhesion ◽  
Antibacterial Properties ◽  
Young Modulus ◽  
Orthopedic Implants ◽  
Antibacterial Activities ◽  
Bone Cell ◽  
Alp Activity ◽  
Porous Ti ◽  
Osteocalcin Production

(1) One strategy to improve the outcome of orthopedic implants is to use porous implants with the addition of a coating with an antibacterial biomolecule. In this study, we aimed to produce and test the biocompatibility, the osteopromotive (both under normal conditions and under a bacterial challenge with lipopolysaccharide (LPS)) and antibacterial activities of a porous Ti-6Al-4V implant coated with the flavonoid quercitrin in vitro. (2) Porous Ti-6Al-4V implants were produced by 3D printing and further functionalized with quercitrin by wet chemistry. Implants were characterized in terms of porosity and mechanical testing, and the coating with quercitrin by fluorescence staining. Implant biocompatibility and bioactivity was tested using MC3T3-E1 preosteoblasts by analyzing cytotoxicity, cell adhesion, osteocalcin production, and alkaline phosphatase (ALP) activity under control and under bacterial challenging conditions using lipopolysaccharide (LPS). Finally, the antibacterial properties of the implants were studied using Staphylococcus epidermidis by measuring bacterial viability and adhesion. (3) Porous implants showed pore size of about 500 µm and a porosity of 52%. The coating was homogeneous over all the 3D surface and did not alter the mechanical properties of the Young modulus. Quercitrin-coated implants showed higher biocompatibility, cell adhesion, and osteocalcin production compared with control implants. Moreover, higher ALP activity was observed for the quercitrin group under both normal and bacterial challenging conditions. Finally, S. epidermidis live/dead ratio and adhesion after 4 h of incubation was lower on quercitrin implants compared with the control. (4) Quercitrin-functionalized porous Ti-6Al-4V implants present a great potential as an orthopedic porous implant that decreases bacterial adhesion and viability while promoting bone cell growth and differentiation.

scholarly journals A systematic dissection of human primary osteoblasts in vivo at single-cell resolution

2020 ◽  
Author(s):  
Yun Gong ◽  
Junxiao Yang ◽  
Xiaohua Li ◽  
Cui Zhou ◽  
Yu Chen ◽  
...  
Keyword(s):  
Bone Formation ◽  
Single Cell ◽  
Bone Cells ◽  
Expression Patterns ◽  
Cellular Heterogeneity ◽  
Human Osteoblasts ◽  
Primary Osteoblasts ◽  
Human Primary Osteoblasts

AbstractOsteoblasts are multifunctional bone cells, which play essential roles in bone formation, angiogenesis regulation, as well as maintenance of hematopoiesis. Although both in vivo and in vitro studies on mice have identified several potential osteoblast subtypes based on their different transition stages or biological responses to external stimuli, the categorization of primary osteoblast subtypes in vivo in humans has not yet been achieved. Here, we used single-cell RNA sequencing (scRNA-seq) to perform a systematic cellular taxonomy dissection of freshly isolated human osteoblasts. Based on the gene expression patterns and cell lineage reconstruction, we identified three distinct cell clusters including preosteoblasts, mature osteoblasts, and an undetermined rare osteoblast subpopulation. This novel subtype was mainly characterized by the nuclear receptor subfamily 4 group A member 1 and 2 (NR4A1 and NR4A2), and its existence was confirmed by immunofluorescence staining. Trajectory inference analysis suggested that the undetermined cluster, together with the preosteoblasts, are involved in the regulation of osteoblastogenesis and also give rise to mature osteoblasts. Investigation of the biological processes and signaling pathways enriched in each subpopulation revealed that in addition to bone formation, preosteoblasts and undetermined osteoblasts may also regulate both angiogenesis and hemopoiesis. Finally, we demonstrated that there are systematic differences between the transcriptional profiles of human osteoblasts in vivo and mouse osteoblasts both in vivo and in vitro, highlighting the necessity for studying bone physiological processes in humans rather than solely relying on mouse models. Our findings provide novel insights into the cellular heterogeneity and potential biological functions of human primary osteoblasts at the single-cell level, which is an important and necessary step to further dissect the biological roles of osteoblasts in bone metabolism under various (patho-) physiological conditions.

scholarly journals Antibacterial Efficiency of Hydroxyapatite Biomaterials with Biodegradable Polylactic Acid and Polycaprolactone Polymers Saturated with Antibiotics / Bionoārdāmu Polimēru Saturošu Un Ar Antibiotiskajām Vielām Piesūcinātu Biomateriālu Antibakteriālās Efektivitātes Noteikšana

2016 ◽  
Vol 70 (4) ◽  
pp. 220-226
Author(s):  
Juta Kroiča ◽  
Ingus Skadiņš ◽  
Ilze Salma ◽  
Aigars Reinis ◽  
Marina Sokolova ◽  
...  
Keyword(s):  
Biodegradable Polymers ◽  
Bacterial Adhesion ◽  
Antibacterial Properties ◽  
In Vitro Study ◽  
Orthopedic Implants ◽  
Antibacterial Efficiency ◽  
Bacteria Adhesion ◽  
Antibiotic Release ◽  
Biofilm Development

Abstract Infections continue to spread in all fields of medicine, and especially in the field of implant biomaterial surgery, and not only during the surgery, but also after surgery. Reducing the adhesion of bacteria could decrease the possibility of biomaterial-associated infections. Bacterial adhesion could be reduced by local antibiotic release from the biomaterial. In this in vitro study, hydroxyapatite biomaterials with antibiotics and biodegradable polymers were tested for their ability to reduce bacteria adhesion and biofilm development. This study examined the antibacterial efficiency of hydroxyapatite biomaterials with antibiotics and biodegradable polymers against Staphylococcus epidermidis and Pseudomonas aeruginosa. The study found that hydroxyapatite biomaterials with antibiotics and biodegradable polymers show longer antibacterial properties than hydroxyapatite biomaterials with antibiotics against both bacterial cultures. Therefore, the results of this study demonstrated that biomaterials that are coated with biodegradable polymers release antibiotics from biomaterial samples for a longer period of time and may be useful for reducing bacterial adhesion on orthopedic implants.

Evaluation of Cytocompatibility of Bioglass-Niobium Granules with Human Primary Osteoblasts: A Multiparametric Approach

2011 ◽  
Vol 493-494 ◽  
pp. 37-42 ◽  
Author(s):  
G.V.O. Fernandes ◽  
Gutemberg Alves ◽  
A.B.R. Linhares ◽  
Marcelo Henrique Prado da Silva ◽  
J.M. Granjeiro
Keyword(s):  
Cell Density ◽  
Membrane Integrity ◽  
Surface Reactivity ◽  
Control Group ◽  
Mitochondrial Activity ◽  
Surgical Trauma ◽  
Special Importance ◽  
Primary Osteoblasts ◽  
Human Primary Osteoblasts

The pursuit for an ideal bone substitute remains the main focus of many tissue engineering researchers. Among the myriad types of grafts available, synthetic bone grafts are of special importance, because it is available in large amounts, reduce the surgical trauma and eliminate the risk of diseases’ transmission. In this context, bioactive glasses have received attention mostly due to its described biocompatibility and rapid rate of surface reactivity when compared with other materials, allowing for faster interactions with the local tissue. The addition of niobium to this material has been shown as increasing the chemical resistance of the compound and providing greater stability. However, alterations on the chemical composition of biomaterials may impact on its biocompatibility. Therefore, the aim of this study was to evaluate thein vitrobiocompatibility of bioglass-Niobium (BgNb) granules, in comparison with standard commercial bioglass (Biogran®) throughout an interesting multiparametrical approach, employing Phenol 2% and dense polystyrene beads as positive and negative controls, respectively. Extracts from each material were prepared by 24 hours incubation in culture medium (DMEM). Human primary osteoblasts were then exposed for 24 hours to each extract and cell viability was evaluated by three parameters: mitochondrial activity (XTT method), membrane integrity (neutral red dye uptake) and cell density (crystal violet dye exclusion test). BgNb extracts were highly compatible, since the levels of viable cells were similar to the control group (unexposed cells), on all parameters studied. The mean cell density on the Biogran® group was slightly lower than BgNb, even though this material was also non-cytotoxic. The excellentin vitroresponse for BgNb granules indicates the suitability of this material to future studies on its biological and physical properties when appliedin vivo.

scholarly journals A Brief Insight to the Electrophoretic Deposition of PEEK-, Chitosan-, Gelatin-, and Zein-Based Composite Coatings for Biomedical Applications: Recent Developments and Challenges

Surfaces ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 205-239
Author(s):  
Syeda Ammara Batool ◽  
Abdul Wadood ◽  
Syed Wilayat Hussain ◽  
Muhammad Yasir ◽  
Muhammad Atiq Ur Rehman
Keyword(s):  
Electrophoretic Deposition ◽  
Composite Coatings ◽  
Antibacterial Properties ◽  
Orthopedic Implants ◽  
Biologically Active ◽  
Metallic Ions ◽  
Chemical Structures ◽  
Main Challenge

Electrophoretic deposition (EPD) is a powerful technique to assemble metals, polymer, ceramics, and composite materials into 2D, 3D, and intricately shaped implants. Polymers, proteins, and peptides can be deposited via EPD at room temperature without affecting their chemical structures. Furthermore, EPD is being used to deposit multifunctional coatings (i.e., bioactive, antibacterial, and biocompatible coatings). Recently, EPD was used to architect multi-structured coatings to improve mechanical and biological properties along with the controlled release of drugs/metallic ions. The key characteristics of EPD coatings in terms of inorganic bioactivity and their angiogenic potential coupled with antibacterial properties are the key elements enabling advanced applications of EPD in orthopedic applications. In the emerging field of EPD coatings for hard tissue and soft tissue engineering, an overview of such applications will be presented. The progress in the development of EPD-based polymeric or composite coatings, including their application in orthopedic and targeted drug delivery approaches, will be discussed, with a focus on the effect of different biologically active ions/drugs released from EPD deposits. The literature under discussion involves EPD coatings consisting of chitosan (Chi), zein, polyetheretherketone (PEEK), and their composites. Moreover, in vitro and in vivo investigations of EPD coatings will be discussed in relation to the current main challenge of orthopedic implants, namely that the biomaterial must provide good bone-binding ability and mechanical compatibility.

scholarly journals Improved Biocompatibility of TiO2 Nanotubes via Co-Precipitation Loading with Hydroxyapatite and Gentamicin

Coatings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1191
Author(s):  
Shuang Tong ◽  
Xu Sun ◽  
Anhua Wu ◽  
Shu Guo ◽  
Hangzhou Zhang
Keyword(s):  
Tio2 Nanotubes ◽  
Antibacterial Properties ◽  
Orthopedic Implants ◽  
Release Time ◽  
Bone Implants ◽  
In Vivo Experiments ◽  
Co Precipitation ◽  
Cp Ti

The antibacterial properties of titanium make it useful for clinical applications. Hydroxyapatite (HA) is widely utilized as a coating on orthopedic implants to improve osteointegration. Titanium oxide nanotubes (TNT) are recognized as a promising solution for local antibiotic therapy in bone implants. It is demonstrated that the utilization of HA-coated titanium can improve the biocompatibility of bone implants. This research aims to examine the antibacterial properties and biocompatibility of the TiO2 nanotubes by loading HA and gentamicin. In vitro testing, the characterization of drug release, cell adhesion and proliferation, bacteria culture, and antibacterial tests were conducted. During the in vivo experiments, Staphylococcus aureus was implanted into the femur of rats. The animals were sacrificed at four weeks followed by microbiological and clinical assessments on the bone, which were conducted by removing the implants followed by agar plating. The in vitro cell incubation demonstrated that the TiO2 nanotubes loaded with hydroxyapatite and gentamicin had better cellular compatibility compared to Cp–Ti. In addition, in vitro elution testing showed that gentamicin was released from the hydroxyapatite/TiO2 nanotubes for as long as 22 days. The release time was much longer than the TNT loaded with gentamicin at only 6 h. All animals in the gentamicin/HA/TNT group were free of infection compared to those in the Cp–Ti, TNT, and HA/gentamicin/TNT groups. There was a considerable reduction in the rates of infection among the rats with gentamicin-HA-TNT coatings compared to standard titanium. These results indicated that the co-precipitation of gentamicin and HA loading using the TNT method provided a novel prophylactic method against prosthetic infections and other biomedical applications.

scholarly journals The Biological Activity of Monarda didyma L. Essential Oil and Its Effect as a Diet Supplement in Mice and Broiler Chicken

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3368
Author(s):  
Héloïse Côté ◽  
André Pichette ◽  
Alexis St-Gelais ◽  
Jean Legault
Keyword(s):  
Body Weight ◽  
Essential Oil ◽  
Feed Efficiency ◽  
Body Weight Gain ◽  
Antibacterial Properties ◽  
Resistant Bacteria ◽  
Growth Promoters ◽  
Antibiotic Growth Promoters ◽  
Monarda Didyma

The use of growth-promoting antibiotics in livestock faces increasing scrutiny and opposition due to concerns about the increased occurrence of antibiotic-resistant bacteria. Alternative solutions are being sought, and plants of Lamiaceae may provide an alternative to synthetic antibiotics in animal nutrition. In this study, we extracted essential oil from Monarda didyma, a member of the Lamiaceae family. We examined the chemical composition of the essential oil and then evaluated the antibacterial, antioxidant, and anti-inflammatory activities of M. didyma essential oil and its main compounds in vitro. We then evaluated the effectiveness of M. didyma essential oil in regard to growth performance, feed efficiency, and mortality in both mice and broilers. Carvacrol (49.03%) was the dominant compound in the essential oil extracts. M. didyma essential oil demonstrated antibacterial properties against Escherichia coli (MIC = 87 µg·mL−1), Staphylococcus aureus (MIC = 47 µg·mL−1), and Clostridium perfringens (MIC = 35 µg·mL−1). Supplementing the diet of mice with essential oil at a concentration of 0.1% significantly increased body weight (+5.4%) and feed efficiency (+18.85%). In broilers, M. didyma essential oil significantly improved body weight gain (2.64%). Our results suggest that adding M. didyma essential oil to the diet of broilers offers a potential substitute for antibiotic growth promoters.

scholarly journals A High-Throughput Metabolic Microarray Assay Reveals Antibacterial Effects of Black and Red Raspberries and Blackberries against Helicobacter pylori Infection

Antibiotics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 845
Author(s):  
Candace Goodman ◽  
Katrina N. Lyon ◽  
Aitana Scotto ◽  
Cyra Smith ◽  
Thomas A. Sebrell ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
High Throughput ◽  
Antibacterial Properties ◽  
Treatment Strategies ◽  
Helicobacter Pylori Infection ◽  
Antibacterial Effects ◽  
Biolog System ◽  
Freeze Dried ◽  
H Pylori

Helicobacter pylori infection is commonly treated with a combination of antibiotics and proton pump inhibitors. However, since H. pylori is becoming increasingly resistant to standard antibiotic regimens, novel treatment strategies are needed. Previous studies have demonstrated that black and red berries may have antibacterial properties. Therefore, we analyzed the antibacterial effects of black and red raspberries and blackberries on H. pylori. Freeze-dried powders and organic extracts from black and red raspberries and blackberries were prepared, and high-performance liquid chromatography was used to measure the concentrations of anthocyanins, which are considered the major active ingredients. To monitor antibiotic effects of the berry preparations on H. pylori, a high-throughput metabolic growth assay based on the Biolog system was developed and validated with the antibiotic metronidazole. Biocompatibility was analyzed using human gastric organoids. All berry preparations tested had significant bactericidal effects in vitro, with MIC90 values ranging from 0.49 to 4.17%. Antimicrobial activity was higher for extracts than powders and appeared to be independent of the anthocyanin concentration. Importantly, human gastric epithelial cell viability was not negatively impacted by black raspberry extract applied at the concentration required for complete bacterial growth inhibition. Our data suggest that black and red raspberry and blackberry extracts may have potential applications in the treatment and prevention of H. pylori infection but differ widely in their MICs. Moreover, we demonstrate that the Biolog metabolic assay is suitable for high-throughput antimicrobial susceptibility screening of H. pylori.

scholarly journals An In Vitro Coumarin-Antibiotic Combination Treatment of Pseudomonas aeruginosa Biofilms

2021 ◽  
Vol 16 (1) ◽  
pp. 1934578X2098774
Author(s):  
Jinpeng Zou ◽  
Yang Liu ◽  
Ruiwei Guo ◽  
Yu Tang ◽  
Zhengrong Shi ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Drug Resistance ◽  
Combination Treatment ◽  
Crude Extract ◽  
Biofilm Formation ◽  
Bacterial Resistance ◽  
Antibacterial Properties ◽  
Biofilm Growth ◽  
Antibiotic Combination

The drug resistance of Pseudomonas aeruginosa is a worldwide problem due to its great threat to human health. A crude extract of Angelica dahurica has been proved to have antibacterial properties, which suggested that it may be able to inhibit the biofilm formation of P. aeruginosa; initial exploration had shown that the crude extract could inhibit the growth of P. aeruginosa effectively. After the adaptive dose of coumarin was confirmed to be a potential treatment for the bacteria’s drug resistance, “coumarin-antibiotic combination treatments” (3 coumarins—simple coumarin, imperatorin, and isoimperatorin—combined with 2 antibiotics—ampicillin and ceftazidime) were examined to determine their capability to inhibit P. aeruginosa. The final results showed that (1) coumarin with either ampicillin or ceftazidime significantly inhibited the biofilm formation of P. aeruginosa; (2) coumarin could directly destroy mature biofilms; and (3) the combination treatment can synergistically enhance the inhibition of biofilm formation, which could significantly reduce the usage of antibiotics and bacterial resistance. To sum up, a coumarin-antibiotic combination treatment may be a potential way to inhibit the biofilm growth of P. aeruginosa and provides a reference for antibiotic resistance treatment.

Antibacterial properties in-vitro of Mexican serviceberry extracts against dental biofilm species

2021 ◽  
pp. 1-16
Author(s):  
Erika-Alejandra Salinas-Peña ◽  
Martha Mendoza-Rodríguez ◽  
Claudia Velázquez-González ◽  
Carlo Eduardo Medina-Solis ◽  
América Patricia Pontigo-Loyola ◽  
...  
Keyword(s):  
Secondary Metabolites ◽  
Antibacterial Properties ◽  
Fusobacterium Nucleatum ◽  
Positive Control ◽  
Dilution Method ◽  
Periodontal Pathogens ◽  
Leaf Extracts ◽  
Dental Biofilm ◽  
Biofilm Bacteria

BACKGROUND: The Mexican serviceberry, Malacomeles denticulata, have been used as a successful oral therapy by Mexican communities without enough scientific support. OBJECTIVE: To evaluate the M. denticulata extracts with selective antibacterial properties over dental biofilm bacteria. METHODS: Fruit, Leaf, and Stem of M. denticulata extracts were evaluated with micro-broth dilution method using ATCC bacteria. OD600 values had compared against each positive control (T-student-test). Anaerobically viability had confirmed by Colony-Forming-Units. Thin-Layer-Chromatography was used to identify the number of compounds and phytochemicals to identify secondary metabolites of the selected extracts. RESULTS: Streptococcus mutans showed Minimum-Bactericidal-Concentrations_(MBC) at 30 mg/mL to Fruit, Leaf, and Stem extracts. Periodontal-pathogens Aggregatibacter actinomycetemcomitans serotype b_(MBC = 30 mg/mL_p <  0.01); Fusobacterium nucleatum subsp. nucleatum_(MBC = 30 mg/mL_p<0.001); Parvimonas micra_(MBC = 15 mg/mL_NS); Porphyromonas gingivalis_(MBC = 30 mg/mL_NS); and Prevotella intermedia_(MBC = 3.75 mg/mL_NS) presented higher sensitivity to Leaf-Methanol, than the primary colonizers. Phytochemicals showed positive results to anthraquinones, coumarins, flavonoids, saponins, saponins steroids/triterpenoids, steroids/triterpenes, and tannins/phenols. CONCLUSION: We suggest the natural extracts of fruit and leaf of the Mexican serviceberry for the preventive use over the oral cariogenic or periodontal biofilm species, by their selective antibacterial properties against pathogenic species evaluated in-vitro, and due to the presence of antibacterial secondary metabolites identified as flavonoids and saponins of M. denticulata leaf extracts.

Sign in / Sign up

Export Citation Format

Share Document