scholarly journals Peptide Functionalization of Silicon for Detection and Classification of Prostatic Cells

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Jane Politi ◽  
Silvia Zappavigna ◽  
Ilaria Rea ◽  
Paolo Grieco ◽  
Alessandro Caliò ◽  
...  

The development of simple, rapid, and low cost methods for early detection, identification, and measurement of multiple biomarkers remains a challenge to improve diagnosis, treatment monitoring, and prognosis of cancer. Biosensing technology, combining the properties of biological systems with functional advanced materials, guarantees rapid, reproducible, and highly sensitive cell detection. In this study, we developed silicon-based biochips for prostate cancer PC3 cells detection by using cytokeratin 8/18 and Urotensin Receptor (UTR) as markers in order to obtain a biochip-based diagnostic system. Spectroscopic ellipsometry and fluorescence microscopy were used to characterize surface homogeneity and chemical properties. Cell detection was investigated by optical microscopy. Moreover, synthetic fluorescently labeled peptides were prepared and used for developing faster and lower-cost identification assay compared with classic ELISA immunoassay. Results showed an effective immobilization of PC3 cells on silicon surface and the specific recognition of these cells by fluorescent Urotensin II (4–11). In conclusion, this strategy could be really useful as diagnostic system for prostate cancer.

2021 ◽  
Vol 14 (2) ◽  
pp. 103
Author(s):  
Zohaib Rana ◽  
Joel D. A. Tyndall ◽  
Muhammad Hanif ◽  
Christian G. Hartinger ◽  
Rhonda J. Rosengren

Androgen receptor (AR)-null prostate tumors have been observed in 11–24% of patients. Histone deacetylases (HDACs) are overexpressed in prostate tumors. Therefore, HDAC inhibitors (Jazz90 and Jazz167) were examined in AR-null prostate cancer cell lines (PC3 and DU145). Both Jazz90 and Jazz167 inhibited the growth of PC3 and DU145 cells. Jazz90 and Jazz167 were more active in PC3 cells and DU145 cells in comparison to normal prostate cells (PNT1A) and showed a 2.45- and 1.30-fold selectivity and higher cytotoxicity toward DU145 cells, respectively. Jazz90 and Jazz167 reduced HDAC activity by ~60% at 50 nM in PC3 lysates. At 4 μM, Jazz90 and Jazz167 increased acetylation in PC3 cells by 6- to 8-fold. Flow cytometry studies on the cell phase distribution demonstrated that Jazz90 causes a G0/G1 arrest in AR-null cells, whereas Jazz167 leads to a G0/G1 arrest in DU145 cells. However, apoptosis only occurred at a maximum of 7% of the total cell population following compound treatments in PC3 and DU145 cells. There was a reduction in cyclin D1 and no significant changes in bcl-2 in DU145 and PC3 cells. Overall, the results showed that Jazz90 and Jazz167 function as cytostatic HDAC inhibitors in AR-null prostate cancer cells.


Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1332
Author(s):  
Armando Hernandez-Garcia

Proteins and DNA exhibit key physical chemical properties that make them advantageous for building nanostructures with outstanding features. Both DNA and protein nanotechnology have growth notably and proved to be fertile disciplines. The combination of both types of nanotechnologies is helpful to overcome the individual weaknesses and limitations of each one, paving the way for the continuing diversification of structural nanotechnologies. Recent studies have implemented a synergistic combination of both biomolecules to assemble unique and sophisticate protein–DNA nanostructures. These hybrid nanostructures are highly programmable and display remarkable features that create new opportunities to build on the nanoscale. This review focuses on the strategies deployed to create hybrid protein–DNA nanostructures. Here, we discuss strategies such as polymerization, spatial directing and organizing, coating, and rigidizing or folding DNA into particular shapes or moving parts. The enrichment of structural DNA nanotechnology by incorporating protein nanotechnology has been clearly demonstrated and still shows a large potential to create useful and advanced materials with cell-like properties or dynamic systems. It can be expected that structural protein–DNA nanotechnology will open new avenues in the fabrication of nanoassemblies with unique functional applications and enrich the toolbox of bionanotechnology.


2021 ◽  
Vol 102 ◽  
pp. 165-172
Author(s):  
Kandasamy Saravanakumar ◽  
Arokia Vijaya Anand Mariadoss ◽  
Anbazhagan Sathiyaseelan ◽  
Karthikkumar Venkatachalam ◽  
Xiaowen Hu ◽  
...  

Cells ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 838
Author(s):  
Andreia de Almeida ◽  
Dimitris Parthimos ◽  
Holly Dew ◽  
Oliver Smart ◽  
Marie Wiltshire ◽  
...  

Aquaporins are required by cells to enable fast adaptation to volume and osmotic changes, as well as microenvironmental metabolic stimuli. Aquaglyceroporins play a crucial role in supplying cancer cells with glycerol for metabolic needs. Here, we show that AQP3 is differentially expressed in cells of a prostate cancer panel. AQP3 is located at the cell membrane and cytoplasm of LNCaP cell while being exclusively expressed in the cytoplasm of Du145 and PC3 cells. LNCaP cells show enhanced hypoxia growth; Du145 and PC3 cells display stress factors, indicating a crucial role for AQP3 at the plasma membrane in adaptation to hypoxia. Hypoxia, both acute and chronic affected AQP3′s cellular localization. These outcomes were validated using a machine learning classification approach of the three cell lines and of the six normoxic or hypoxic conditions. Classifiers trained on morphological features derived from cytoskeletal and nuclear labeling alongside corresponding texture features could uniquely identify each individual cell line and the corresponding hypoxia exposure. Cytoskeletal features were 70–90% accurate, while nuclear features allowed for 55–70% accuracy. Cellular texture features (73.9% accuracy) were a stronger predictor of the hypoxic load than the AQP3 distribution (60.3%).


The Analyst ◽  
2021 ◽  
Author(s):  
Jinyuan Chen ◽  
Hongxiang Wei ◽  
Xinyu Fang ◽  
Yuanqing Cai ◽  
Zhenzhen Zhang ◽  
...  

A pragmatic electrochemical mecA gene detection method for a rapid, accurate and low-cost identification of MRSA in the joint synovial fluid of PJI patients.


RSC Advances ◽  
2019 ◽  
Vol 9 (17) ◽  
pp. 9379-9385 ◽  
Author(s):  
Binshuai Wang ◽  
Yimeng Song ◽  
Liyuan Ge ◽  
Shudong Zhang ◽  
Lulin Ma

We report the fabrication of an antibody-modified reduced graphene oxide film, which can be used to efficiently detect CTCs in PCa patients with PSA levels of 4–10 ng mL−1.


Symmetry ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1249 ◽  
Author(s):  
Bruns

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.


MRS Bulletin ◽  
1986 ◽  
Vol 11 (4) ◽  
pp. 27-27 ◽  
Author(s):  
John J. Gilman

The boundaries between the present performance of materials and the requirements of device designers have for centuries been moving forward. The steps taken to draw these two together are sometimes large; more often they are small. As they occur, we find materials that are stronger, have larger magnetic moments, have higher electron mobilities, etc. Each time the property profile improves, understanding of the physical and chemical properties advances, and new engineering devices based on the improved profile are invented and developed.The purpose of the Center for Advanced Materials (CAM) at the Lawrence Berkeley Laboratory (LBL) is to enhance the inter-play between advances in the property profiles of materials and advances in the chemical and physical understanding of them. For this purpose, the location of CAM can be described as ideal. The proximity of this national laboratory to the campus of the University of California at Berkeley provides an unusually rich intellectual setting for the Center. It also provides unique opportunities for the University students and faculty who conduct materials-related research. Indeed, the arrangement should be a model for similar organizations, and it represents a solid method for strengthening materials science and technology throughout the nation.National policy in critical materials has given the national laboratories—including LBL—strong direction and incentive to collaborate with industry and the research universities. This incentive led to the establishment of CAM in order to build on the symbiosis between LBL and the University of California at Berkeley. It strives to extend this symbiosis by bringing industry into the ongoing educational process and by making its special facilities more readily available to industrial researchers.


The Prostate ◽  
2010 ◽  
Vol 70 (14) ◽  
pp. 1501-1512 ◽  
Author(s):  
Keitaro Kojima ◽  
Yasunori Fujita ◽  
Yoshinori Nozawa ◽  
Takashi Deguchi ◽  
Masafumi Ito

Sign in / Sign up

Export Citation Format

Share Document