scholarly journals Evaluation and Analysis of Variance of Storage Stability of Asphalt Binder Modified by Nanotitanium Dioxide

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Xiaolong Zou ◽  
Aimin Sha ◽  
Biao Ding ◽  
Yuqiao Tan ◽  
Xiaonan Huang
Keyword(s):  
Analysis Of Variance ◽  
Softening Point ◽  
Storage Time ◽  
Storage Stability ◽  
Storage Temperature ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Nanoparticle Content ◽  
The Impact

To investigate the effects of nanoparticle content, storage time, and storage temperature on the storage stability of asphalt binders modified by nanoparticles, hot tube storage tests, softening point tests, and dynamic-shearing rheometer (DSR) tests were adopted to evaluate the properties of two kinds of nanotitanium dioxide (TiO2) modified asphalt binders. A statistical one-way analysis of variance (ANOVA) test was employed to analyze the effects of those variations on the storage stability of the nano-TiO2 modified asphalt binders. The results indicated that the softening point, the failure temperature, the dynamic-shear viscosity, and G⁎/sinδ of the binders increased with nanoparticle content. The storage stability of the binders decreased with nanoparticle content. The impact of storage time on the storage stability of the binders was remarkable when the storage time was more than 48 h. Moreover, the storage stability of the binders at low temperatures was better than that at high temperatures. Based on the one-way ANOVA, the size of nanoparticle had little influence on the storage stability of the nano-TiO2 modified asphalt binders in this study. Reducing the nanoparticle size cannot effectively enhance the storage stability of the nanoparticle modified asphalt binder due to the agglomeration of nanoparticle.

scholarly journals Evaluation of Rutting and Fatigue Behaviors of Asphalt Binders Modified with Calcium Lignosulfonate

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Saeed Fatemi ◽  
Jafar Bolouri Bazaz ◽  
Seyed Ali Ziaee
Keyword(s):  
Storage Stability ◽  
Asphalt Binder ◽  
Thermal Storage ◽  
Fatigue Performance ◽  
Stability Test ◽  
Asphalt Binders ◽  
Test Results ◽  
Asphalt Mixes ◽  
Modified Asphalt ◽  
The Impact

Asphalt mixes encounter different distress during the life cycle of asphalt pavements, among which rutting and fatigue failure are prominent. Moreover, the addition of environmentally friendly modifiers into the asphalt binder to increase the performance of asphalt mixes has been a challenging phenomenon for researchers. Calcium lignosulfonate (CL) is a waste material that is a by-product of the wood industry. In this paper, the impact of the calcium lignosulfonate on the rutting and fatigue performance of the asphalt binder was investigated. For this purpose, the Dynamic Shear Rheometer (DSR) was utilized to run the Multiple Stress Creep Recovery (MSCR) test and evaluate G ∗ /sinδ and G ∗ ·sinδ indices for the asphalt binder containing different percentages of CL. The elastic recovery test was also conducted on the asphalt binder. In order to analyze the thermal storage stability of CL-modified asphalt binders, the storage stability test was considered. The Field Emission Scanning Electron Microscope test showed that using CL as a binder modifier makes the texture of the asphalt binder spongy and porous. The conventional test results indicated that increasing the CL amount in the asphalt binder led to an increase in the stiffness of the asphalt binder. The rheological test results showed that the rutting resistance of the asphalt binder improved by adding up to 15% of the CL powder; however, the fatigue performance and the elasticity of the asphalt binder declined by increasing the CL content in the asphalt binder. The storage stability test revealed that the dispersion of CL in the asphalt binder was uniform; moreover, the presence of CL in the asphalt binder could not adversely affect the thermal storage stability of the modified asphalt binder.

scholarly journals Impact of Graphene Oxide on Zero Shear Viscosity, Fatigue Life and Low-Temperature Properties of Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3073
Author(s):  
Abbas Mukhtar Adnan ◽  
Chaofeng Lü ◽  
Xue Luo ◽  
Jinchang Wang
Keyword(s):  
Graphene Oxide ◽  
Fatigue Life ◽  
Low Temperature ◽  
Shear Viscosity ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Zero Shear Viscosity ◽  
Modified Asphalt

This study has investigated the impact of graphene oxide (GO) in enhancing the performance properties of an asphalt binder. The control asphalt binder (60/70 PEN) was blended with GO in contents of 0%, 0.5%, 1%, 1.5%, 2%, and 2.5%. The permanent deformation behavior of the modified asphalt binders was evaluated based on the zero shear viscosity (ZSV) parameter through a steady shear test approach. Superpave fatigue test and the linear amplitude sweep (LAS) method were used to evaluate the fatigue behavior of the binders. A bending beam rheometer (BBR) test was conducted to evaluate the low-temperature cracking behavior. Furthermore, the storage stability of the binders was investigated using a separation test. The results of the ZSV test showed that GO considerably enhanced the steady shear viscosity and ZSV value, showing a significant contribution of the GO to the deformation resistance; moreover, GO modification changed the asphalt binder’s behavior from Newtonian to shear-thinning flow. A notable improvement in fatigue life was observed with the addition of GO to the binder based on the LAS test results and Superpave fatigue parameter. The BBR test results revealed that compared to the control asphalt, the GO-modified binders showed lower creep stiffness (S) and higher creep rate (m-value), indicating increased cracking resistance at low temperatures. Finally, the GO-modified asphalt binders exhibited good storage stability under high temperatures.

Preparation and Properties of Ageing Resistant Asphalt Binder with Various Anti-Ageing Additives

2011 ◽  
Vol 71-78 ◽  
pp. 1062-1067 ◽  
Author(s):  
Zhen Gang Feng ◽  
Jian Ying Yu ◽  
Heng Long Zhang ◽  
Dong Liang Kuang
Keyword(s):  
Synergistic Effect ◽  
Softening Point ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Uv Absorber ◽  
Modified Asphalt Binder ◽  
Uv Absorbers ◽  
Compound Modification ◽  
Oxidative Ageing

The modified asphalt binders with various anti-ageing additives, including ultraviolet (UV) absorber, antioxidant and combination of them, were prepared, and the effects of UV absorber contents, antioxidant contents and combination of UV absorber and antioxidant on physical properties and ageing characteristics of the asphalt binder were investigated. Results show that the ductility of asphalt binder increases whereas the softening point and viscosity decrease with addition of anti-ageing additives. UV absorbers and antioxidants exhibit different influences on the ageing properties of asphalt binder. The thermal- and photo-oxidative ageing performance of asphalt binder can be simultaneously improved by the compound modification with UV absorber and antioxidant. The combination of UV326 and antioxidant 1010 shows synergistic effect in preventing the asphalt binder from thermal- and photo-oxidative ageing, which contributes to excellent ageing resistance of modified asphalt binder.

PHYSICAL PROPERTIES AND STORAGE STABILITY OF GEOPOLYMER MODIFIED ASPHALT BINDER

2016 ◽  
Vol 78 (7-2) ◽  
Author(s):  
Ahmad Nazrul Hakimi Ibrahim ◽  
Nur Izzi Md. Yusoff ◽  
Norliza Mohd Akhir ◽  
Muhamad Nazri Borhan
Keyword(s):  
Physical Properties ◽  
Storage Stability ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Potential Alternative ◽  
Modified Binder ◽  
And Storage

This study was conducted to investigate the physical properties and storage stability of the 80/100 penetration grade asphalt modified with geopolymer. In this research, fly ash and alkali activators, namely sodium silicate (Na2SiO3) and sodium hydroxide (NaOH), were used as geopolymer components. The penetration, Ring and Ball softening point, ductility, and viscosity tests were conducted to determine the physical properties of geopolymer modified asphalt (GMA). Five samples of asphalt binders with varying percentages of geopolymer, namely 0, 3, 5, 7 and 9%, by weight of asphalt binder were studied. Results show that geopolymer has good compatibility with asphalt binder. The addition of geopolymer into asphalt binder resulted in improved permanent deformation resistance of the modified binder compared to that of the conventional asphalt. In conclusion, geopolymer could be considered as a potential alternative in the modification of the properties of asphalt binder.

Experimental Study on Polyphosphoric Acid (PPA) Modified Asphalt Binders

2010 ◽  
Vol 152-153 ◽  
pp. 288-294 ◽  
Author(s):  
Wei Dong Cao ◽  
Shu Tang Liu ◽  
Hong Lu Mao
Keyword(s):  
Low Temperature ◽  
Softening Point ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Point Test ◽  
Low Temperature Performance ◽  
Four Levels ◽  
Temperature Susceptibility

Polyphosphric acid (PPA) modified asphalt binders were produced in the laboratory using one base asphalt and four levels of PPA contents (0.6%, 1.0%, 1.5% and 2.0% by weight of base asphalt). Penetration test, softening point test, rotation viscosity test, creep test with bending beam rheometer (BBR) and four components test were carried out to study the performance of PPA modified asphalt binders and possible modification mechanism. The results indicate that the high-temperature performance of PPA modified asphalt binders are obviously improved and temperature susceptibility are decreased, but the low-temperature performance slightly decline compared with base asphalt. The PPA content has a very significant effect on softening point whereas it has no significant influence on low-temperature performance according to variance analysis (ANOVA). Finally, four components test reveals that the primary modification mechanism of PPA is the change of chemical composition of asphalt binder.

scholarly journals Characterization of thermal storage stability of waste plastic pyrolytic char modified asphalt binders with sulfur

PLoS ONE ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. e0248465
Author(s):  
Abhinay Kumar ◽  
Rajan Choudhary ◽  
Ankush Kumar
Keyword(s):  
Storage Stability ◽  
Asphalt Binder ◽  
Principal Component ◽  
Thermal Storage ◽  
Asphalt Binders ◽  
Waste Plastic ◽  
Modified Asphalt ◽  
Modified Binders ◽  
Pyrolytic Char

Pyrolysis has gained a strong interest in recent times for sustainable treatment and recovery of energy-rich products from different wastes including plastic. Waste plastic pyrolytic char (PPC) generated as a carbonaceous by-product in the pyrolysis process, is gaining attention as an asphalt binder modifier. Adequate thermal storage stability is an essential requirement for a modified asphalt binder to ensure that the composite offers integrity and homogeneous properties during its storage, handling and transportation in the field. The objective of this study was to evaluate and characterize the thermal storage stability properties of PPC modified binders. PPC modified asphalt binders were fabricated and evaluated at multiple dosages of sulfur as a cross-linking agent. In addition to the conventionally used softening point difference (SPD), characterization of thermal storage stability was attempted using rheology-based separation indices (SIs) derived through temperature sweep, frequency sweep, and multiple stress creep and recovery (MSCR) tests. These rheological SIs were based on complex modulus (G*), Superpave rutting parameter (G*/sin δ), Shenoy rutting parameter (SRP), zero shear viscosity (ZSV), and MSCR Jnr (at three stress levels 0.1, 3.2 and 10 kPa). Two formulations of each rheology-based separation index were studied: (1) ratio, and (2) maximum-average difference formulations. The temperature and frequency dependencies of rheological SIs were also evaluated. Further, the Fourier transform infrared spectroscopy (FTIR) was used to characterize storage stability by comparing the chemical functionalities of the PPC modified binders. A 0.3% dosage of sulfur was found to produce the best results considering all SPD, rheology-based SIs and FTIR. Principal component analysis showed that the ratio and maximum-average formulations had similar contributions to the first principal component accounting for more than 99% of the variability.

scholarly journals Assessment of temperature susceptibility for rubber granulate modified road asphalt binders considering impact of aging

2018 ◽  
Vol 222 ◽  
pp. 01016
Author(s):  
Mieczysław Słowik ◽  
Damian Wiśniewski ◽  
Marcin Bilski ◽  
Marta Mielczarek
Keyword(s):  
Phase Angle ◽  
Softening Point ◽  
Positive Impact ◽  
Asphalt Binder ◽  
Positive Influence ◽  
Asphalt Binders ◽  
Dynamic Shear Modulus ◽  
Road Asphalt ◽  
Modified Asphalt ◽  
Temperature Susceptibility

The article presents the results of research on temperature sensitivity of ground rubber modified asphalt binders. The tests were performed for 50/70 penetration grade road bitumen and two kinds of granulated rubber: activated and inactivated. Such parameters of asphalt binders as: penetration, softening point, dynamic shear modulus and phase angle have been determined and on this basis the temperature susceptibility of the reference bitumen and asphalt binders modified by activated and inactivated rubber have been determined. All the tests were carried out for three observation levels: without aging and after aging simulations carried out by RTFOT and PAV methods. The tests revealed that addition of granulated rubber has a positive influence on asphalt binder properties, even after the aging process, causing an increase in the softening point and a decrease in penetration and the phase angle of asphalt binder. Asphalt binders obtained in result of modification by addition of rubber show smaller temperature susceptibility than the reference bitumen (without addition of rubber). Also, a positive impact of aging on the temperature susceptibility was observed for the investigated binders.

scholarly journals Mixing and Compaction Temperature of Nanosilica Composite Polymer Modified Asphalt

2020 ◽  
Vol 8 (2) ◽  
pp. 27-36
Author(s):  
Esraa J Al-mousawi ◽  
Rashaa H Al-Rubaee ◽  
Ammar A Shubber
Keyword(s):  
Surface Area ◽  
High Temperatures ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Compaction Temperature ◽  
Modified Asphalt ◽  
Modified Binders ◽  
Polymer Modified Asphalt ◽  
Waste Polypropylene

Recently, polymer -nanocomposites were used to manufacture durable asphalt mixtures to replace the polymer modified binder, because of the remarkable properties and unique features of nanomaterials compared to conventional materials, such as their wide surface area and small dimensions, making it possible to be utilized as an additive for asphalt paving. Nanosilica particles (NS) are one of the latest minerals which likely integrate useful characteristics, such as huge surface area, good distributions, high absorption levels, high stability, and a high level of purity. Therefore, this paper is interested in studying the characteristics of nanocomposite-polymer modified asphalt. In laboratory work, a pure asphalt 60-70 penetration grade, has been modified separately with waste polypropylene polymer (WPP), and nanosillica composite polypropylene (NS/WPP) at different concentrations. As a result, two modified binders: waste polypropylene polymer- modified asphalt (WPP-MA), and nanosillica composite polypropylene modified asphalt (NSCPMA) were obtained. Traditional asphalt binder tests were performed for pure and modified binders such as penetration, ductility, flash and fire point test, softening point, and rotational viscosity. Also, storage stability test has been conducted to ensure the storage stability of binders at high temperatures. The results showed an improvement in physical properties and increase in mixing and compaction temperature due to the increase in stiffness of (NSCPMA). The results also indicated that the nanosillica composite polypropylene modified asphalt binders have good storage stability at high temperatures.

CHARACTERIZATION OF THE PERFORMANCE OF ALUMINUM OXIDE NANOPARTICLES MODIFIED ASPHALT BINDER

2016 ◽  
Vol 78 (4) ◽  
Author(s):  
Shaban Imael Albrka Ali ◽  
Amiruddin Ismail ◽  
Nur Izzi Md. Yusoff ◽  
Norhidayah Abdul Hassan ◽  
Ahmad Nazrul Hakimi Ibrahim
Keyword(s):  
Aluminum Oxide ◽  
Softening Point ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Aluminum Oxide Nanoparticles ◽  
Asphalt Cement ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Rotational Viscosity

This study investigates the physical and rheological properties of asphalt binders modified by nano aluminum oxide (AL2O3). Several conventional tests were conducted, including penetration, softening point and ductility, rotational viscosity and dynamic shear rheometer (DSR). Based on the results of the tests, it was found that the hardness of modified asphalt binders increased with the addition of nano AL2O3 up to 5%. As a result of the increased hardness, the softening point of modified asphalt improved compared with base asphalt binders. The rheological property of modified binders was enhanced at low and high temperatures. The results of a DSR test revealed that the G* were improved, whereas the δ decreased slightly. The addition of a different percentage of AL2O3 to base binder had a remarkable influence on resistance to permanent deformation (high temperature rutting and low temperature fatigue). Results recognize 5 wt.% as the optimum content of the modifier. Therefore, nano AL2O3 can be considered as a proper alternative additive to modify the properties of asphalt cement.

Road Performance of Asphalt Binder Modified with Natural Rock Asphalt

2013 ◽  
Vol 634-638 ◽  
pp. 2729-2732 ◽  
Author(s):  
Feng Ma ◽  
Chao Zhang
Keyword(s):  
Temperature Sensitivity ◽  
Softening Point ◽  
Asphalt Binder ◽  
Component Analysis ◽  
Asphalt Binders ◽  
Test Results ◽  
Modified Asphalt ◽  
Natural Rock ◽  
Road Performance ◽  
Natural Asphalt

The performance of base asphalt and modified asphalt by natural rock asphalt are studied. This paper presents the results from a series of assessments of properties of asphalt binders, which incorporate natural rock asphalts produced from China. Asphalt binders’ properties were measured by penetration, Ring and Ball softening point, ductility and four component analysis tests. Test results showed that the addition of natural asphalt reduces the penetration and ductility value, and increases softening point. The temperature sensitivity of modified asphalt is reduced.

Sign in / Sign up

Export Citation Format

Share Document