CHARACTERIZATION OF THE PERFORMANCE OF ALUMINUM OXIDE NANOPARTICLES MODIFIED ASPHALT BINDER

2016 ◽  
Vol 78 (4) ◽  
Author(s):  
Shaban Imael Albrka Ali ◽  
Amiruddin Ismail ◽  
Nur Izzi Md. Yusoff ◽  
Norhidayah Abdul Hassan ◽  
Ahmad Nazrul Hakimi Ibrahim
Keyword(s):  
Aluminum Oxide ◽  
Softening Point ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Aluminum Oxide Nanoparticles ◽  
Asphalt Cement ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Rotational Viscosity

This study investigates the physical and rheological properties of asphalt binders modified by nano aluminum oxide (AL2O3). Several conventional tests were conducted, including penetration, softening point and ductility, rotational viscosity and dynamic shear rheometer (DSR). Based on the results of the tests, it was found that the hardness of modified asphalt binders increased with the addition of nano AL2O3 up to 5%. As a result of the increased hardness, the softening point of modified asphalt improved compared with base asphalt binders. The rheological property of modified binders was enhanced at low and high temperatures. The results of a DSR test revealed that the G* were improved, whereas the δ decreased slightly. The addition of a different percentage of AL2O3 to base binder had a remarkable influence on resistance to permanent deformation (high temperature rutting and low temperature fatigue). Results recognize 5 wt.% as the optimum content of the modifier. Therefore, nano AL2O3 can be considered as a proper alternative additive to modify the properties of asphalt cement.

Preparation and Properties of Ageing Resistant Asphalt Binder with Various Anti-Ageing Additives

2011 ◽  
Vol 71-78 ◽  
pp. 1062-1067 ◽  
Author(s):  
Zhen Gang Feng ◽  
Jian Ying Yu ◽  
Heng Long Zhang ◽  
Dong Liang Kuang
Keyword(s):  
Synergistic Effect ◽  
Softening Point ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Uv Absorber ◽  
Modified Asphalt Binder ◽  
Uv Absorbers ◽  
Compound Modification ◽  
Oxidative Ageing

The modified asphalt binders with various anti-ageing additives, including ultraviolet (UV) absorber, antioxidant and combination of them, were prepared, and the effects of UV absorber contents, antioxidant contents and combination of UV absorber and antioxidant on physical properties and ageing characteristics of the asphalt binder were investigated. Results show that the ductility of asphalt binder increases whereas the softening point and viscosity decrease with addition of anti-ageing additives. UV absorbers and antioxidants exhibit different influences on the ageing properties of asphalt binder. The thermal- and photo-oxidative ageing performance of asphalt binder can be simultaneously improved by the compound modification with UV absorber and antioxidant. The combination of UV326 and antioxidant 1010 shows synergistic effect in preventing the asphalt binder from thermal- and photo-oxidative ageing, which contributes to excellent ageing resistance of modified asphalt binder.

PHYSICAL PROPERTIES AND STORAGE STABILITY OF GEOPOLYMER MODIFIED ASPHALT BINDER

2016 ◽  
Vol 78 (7-2) ◽  
Author(s):  
Ahmad Nazrul Hakimi Ibrahim ◽  
Nur Izzi Md. Yusoff ◽  
Norliza Mohd Akhir ◽  
Muhamad Nazri Borhan
Keyword(s):  
Physical Properties ◽  
Storage Stability ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Potential Alternative ◽  
Modified Binder ◽  
And Storage

This study was conducted to investigate the physical properties and storage stability of the 80/100 penetration grade asphalt modified with geopolymer. In this research, fly ash and alkali activators, namely sodium silicate (Na2SiO3) and sodium hydroxide (NaOH), were used as geopolymer components. The penetration, Ring and Ball softening point, ductility, and viscosity tests were conducted to determine the physical properties of geopolymer modified asphalt (GMA). Five samples of asphalt binders with varying percentages of geopolymer, namely 0, 3, 5, 7 and 9%, by weight of asphalt binder were studied. Results show that geopolymer has good compatibility with asphalt binder. The addition of geopolymer into asphalt binder resulted in improved permanent deformation resistance of the modified binder compared to that of the conventional asphalt. In conclusion, geopolymer could be considered as a potential alternative in the modification of the properties of asphalt binder.

scholarly journals Studying the Properties of SBS/Rice Husk Ash-Modified Asphalt Binder and Mixture

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Zhen Lu ◽  
Aimin Sha ◽  
Wentong Wang ◽  
Junfeng Gao
Keyword(s):  
Low Temperature ◽  
Rice Husk ◽  
Softening Point ◽  
Rice Husk Ash ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Modified Asphalt Binder ◽  
Rotational Viscosity

Sustainable materials in the field of road pavement have become a research direction in recent years. In this study, the rice husk ash with small dosage of styrene-butadiene-styrene (SBS) was added as a bioadditive into the base asphalt to modify its properties. Different contents (0, 2, 5, 10, and 15%) of rice husk ash (RHA) and 1% of SBS were selected to prepare the modified asphalt. Penetration, softening point, ductility, rotational viscosity test, and temperature sweep test were conducted to investigate the properties of SBS/RHA-modified asphalt binder. Rutting test, moisture susceptibility, and low-temperature cracking were utilized to evaluate the performances of SBS/RHA-modified asphalt mixture. The results showed that the penetration decreased and the softening point and rotational viscosity enhanced while the ductility slightly decreased with the incorporation of rice husk ash. The SBS/RHA-modified asphalt mixture had better high-temperature performance than that of the virgin asphalt mixture but slightly lower moisture stability and low temperature performance. The tensile strength ratio of the virgin and modified asphalt mixture met the requirement of specification. The tensile strain of mixture SR15 was lower than the requirement for the asphalt mixtures on the basis of the specification. For the SBS/RHA-modified asphalt binder based on the comprehensive properties, the content of rice husk ash should not be higher than 15%.

scholarly journals Evaluation of Susceptibility of Asphalt Binders to Rutting through MSCR Test

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Rong Chang ◽  
Aimin Sha ◽  
Pinxue Zhao ◽  
Songchang Huang ◽  
Cong Qi
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Stress Sensitivity ◽  
Deformation Resistance ◽  
Asphalt Binders ◽  
Sensitivity Index ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
The Relationship

Using modified asphalt binder is one of the most effective methods to solve the rutting problem of asphalt pavement, but the traditional G ∗ / sin     δ parameter is not enough to characterize the rutting resistance of modified asphalt in field use. In order to accurately evaluate the high temperature performance of asphalt and establish the relationship between the rutting resistance of binder and mixture, two kinds of matrix asphalt and three kinds of modified asphalt were selected for DSR and MSCR tests. G ∗ / sin     δ , nonrecoverable creep compliance Jnr, recovery rate R, and other parameters were used to characterize the permanent deformation resistance of the binder, and the correlation between these parameters and the results of rutting test was analyzed. The results show that Jnr3.2 can accurately characterize the permanent deformation resistance of asphalt, while the stress sensitivity index Jnrdiff is not applicable to all types of modified asphalt. In contrast, Jnrslope can better reflect the stress sensitivity of asphalt, and Jnrslope is significantly correlated with the results of rutting test.

scholarly journals Deterministic Extensional Viscosity and Cracking Index of Polypropylene-Modified-Asphalt Binder

2020 ◽  
Vol 27 (1) ◽  
pp. 25-29
Author(s):  
Abdul-Rahim Al-Hadidy ◽  
Zeena Al-Kazzaz ◽  
Ahmed Ali
Keyword(s):  
Softening Point ◽  
Asphalt Binder ◽  
Extensional Viscosity ◽  
Cold Regions ◽  
Elasticity Moduli ◽  
Asphalt Cement ◽  
Modified Asphalt ◽  
Modified Asphalt Binder

The extensional viscosity and cracking prospectus of polypropylene modified asphalt cement (PPMAC) was explored. Forty/fifty penetration class asphalt cement with fivecontents of polypropylene polymer were chosen. Conventional traits such as: Standard penetration, standard softening point, ductility, utter viscosity, elasticity moduli, penetration prospectus, ageing, cracking prospectus, homogeneity, and extensional viscosity were performed on PPMAC. The PPMAC shows better viscosity, elasticity, enduringness and lower cracking properties at cold regions

scholarly journals Evaluating the Rheological, Chemical and Morphological Properties of SBS Modified Asphalt-Binder under Multiple Aging and Rejuvenation Cycles

2021 ◽  
Vol 11 (19) ◽  
pp. 9242
Author(s):  
Xiaobing Chen ◽  
Yunfeng Ning ◽  
Yongming Gu ◽  
Ronglong Zhao ◽  
Jinhu Tong ◽  
...  
Keyword(s):  
Asphalt Binder ◽  
Morphological Properties ◽  
Asphalt Binders ◽  
Laboratory Simulation ◽  
Fatigue Properties ◽  
Type I ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Microscopic Morphology ◽  
Sbs Modified Asphalt

To investigate the influence of multiple cycles of aging and rejuvenation on the rheological, chemical, and morphological properties of styrene–butadiene–styrene (SBS)-modified asphalt-binders, the asphalt-binders were aged using two laboratory simulation methods, namely a rolling thin film oven (RTFO) test for short-term aging and pressure aging vessel (PAV) for long-term aging. The asphalt-binders were then rejuvenated with three types of rejuvenators (Type I, II, and III) with different dosages (i.e., 6%, 10%, and 14% for the first, second, and third rejuvenation, respectively). A dynamic shear rheometer (DSR) was then used to analyze the effect of rejuvenators on the rheological properties of all the asphalt-binders. The changes in the functional groups and microscopic morphology in the process of multiple aging and rejuvenation cycles were studied using Fourier transform infrared (FTIR) and atomic force microscopy (AFM). The results indicated that the three rejuvenators could soften the stiffness and restore the microstructures of the aged asphalt-binders in the process of repeated aging and rejuvenation from DSR and AFM testing. Considering the rutting and fatigue properties, the Type I rejuvenator exhibited the potential to achieve the desired rejuvenation effects under multiple rejuvenation cycles. During the multiple aging and rejuvenation cycles, the aging resistance of SBSMA decreased gradually from the FTIR results. This inherently limited the number of repeated rejuvenation cycles. This research is conducive to promoting the application of repeated penetrating rejuvenation.

scholarly journals Evaluation of Selected Performance Properties of Nanoclay-Modified Asphalt Binders

2019 ◽  
Vol 271 ◽  
pp. 03006
Author(s):  
Mohammad N. Hassan ◽  
M M Tariq Morshed ◽  
Zahid Hossain
Keyword(s):  
Colloidal Stability ◽  
Asphalt Binder ◽  
Weather Conditions ◽  
Good Alternative ◽  
Asphalt Binders ◽  
Chemical Compositions ◽  
Modified Asphalt ◽  
Adverse Weather ◽  
Modified Asphalt Binder ◽  
Improved Performance

Asphalt binders are often modified with additives such as acid, polymer, or a combination of multiple additives to achieve improved performance to sustain heavy loads and adverse weather conditions. According to some previous researches, nanoclay can be a good alternative of currently practiced Styrene-Butadiene-Styrene (SBS) modification, and the former is expected to reduce the overall cost of the asphalt binder. Three types of nanoclay (Cloisite 10A, 11B, and 15A) were blended with asphalt binders prepared from two different sources (Arabian Crude and Canadian Crude). A blending protocol has been developed to blend nanoclay with the base binders. Mechanical properties including viscosity, rutting parameter have undergone significant changes after the nanoclay modification. It was also observed that nanoclay modified binders offer different moisture susceptibility while bonding with different aggregates; the nanoclay modified asphalt binder exhibits better bonding with gravel than sandstone. Mechanistic properties such as viscosity and rutting parameter are found to be highly correlated with the chemical compositions. Binders from the Canadian crude showed more colloidal stability than binders from the Arabian crude after nanoclay modification.

THE PHYSICAL AND RHEOLOGICAL CHARACTERISTICS OF MODIFIED ASPHALT BINDER WITH TITANIUM DIOXIDE R15

2016 ◽  
Vol 78 (7-3) ◽  
Author(s):  
Rosnawati Buhari ◽  
Chong Ai Ling ◽  
Mohd Ezree Abdullah ◽  
Siti Khatijah Abu Bakar ◽  
Nurul Hidayah Mohd Kamarudin ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Complex Modulus ◽  
Asphalt Binder ◽  
Modified Asphalt ◽  
Performance Grade ◽  
Modified Asphalt Binder ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Nano Titanium Dioxide ◽  
And Control

The objectives of this study include determine the physical and rheological properties of the modified asphalt and also to examine the effectiveness of TiO2 in lowering the viscosity of the asphalt compared to control asphalt. Nano-titanium dioxide R15 of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance. The asphalt modified and control were examine using penetration test, softening point test, storage stability test, dynamic shear rheometer test (DSR), rotational viscosity (RV) and rolling thin film oven test (RTFO). As a conclusion, the decrease in compaction and mixing temperature of modified asphalt compared to original asphalt shows an improvement in the viscosity of the asphalt. Through DSR, the nano-TiO2 modified asphalt does not degrade the performance grade when compared to control asphalt, where the values of complex modulus, G* does not differ much from each other for each of the concentration. This indicates that the modified asphalt is as competent as the original binder in resisting rutting at high temperature.

RHEOLOGICAL BEHAVIOUR OF COCONUT SHELL POWDER MODIFIED ASPHALT BINDER

2016 ◽  
Vol 78 (7-3) ◽  
Author(s):  
Rosnawati Buhari ◽  
Nur Fareesya Zabidi ◽  
Mohd Ezree Abdullah ◽  
Siti Khatijah Abu Bakar ◽  
Nurul Hidayah Mohd Kamarudin
Keyword(s):  
Rheological Properties ◽  
Softening Point ◽  
Asphalt Binder ◽  
Rheological Behaviour ◽  
Coconut Shell ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
Modified Binder ◽  
Coconut Shell Powder ◽  
Shell Powder

The objectives of this study were to determine the blending parameters of coconut shell powder (CSP) modified asphalt binder and to evaluate the rheological properties of CSP modified asphalt binder. CSP of 2%, 4%, 6%, 8% and 10% by weight of asphalt have been incorporated into an unaged 80/100 asphalt mix in order to improve its performance. The influence of the additives on the physical and rheological properties was evaluated with penetration test, softening point, storage stability, dynamic shear rheometer test (DSR), and Field Emission Scanning Electron Microscope (FESEM). The aging of asphalt binders was simulated in a laboratory by using Rotational Thin Film Oven (RTFO). The results showed that the addition of CSP into virgin binder was decreasing the penetration value and increasing the softening point temperature compared to the original binder. On the rheological effect, for unaged modified binder, higher CSP resulted higher G*/sin δ especially at lower temperature compared to the unaged control binder. Besides, for the aged modified binder, stiffness was lower than the control aged binder for all temperature.

scholarly journals Cellulose Microfibril and Micronized Rubber Modified Asphalt Binder

Fibers ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 25
Author(s):  
Ang Li ◽  
Abdu A. Danladi ◽  
Rahul Vallabh ◽  
Mohammed K. Yakubu ◽  
Umar Ishiaku ◽  
...  
Keyword(s):  
Linear Regression Analysis ◽  
Asphalt Binder ◽  
Cost Effective ◽  
Cellulose Microfibrils ◽  
Asphalt Binders ◽  
Asphalt Emulsion ◽  
Clear Trend ◽  
Modified Asphalt ◽  
Weight Content ◽  
Modified Asphalt Binder

Cellulose microfibrils (CMFs) and micronized rubber powder (MRP) can be derived from low or negative-cost agricultural/industrial waste streams and offer environment-friendly and cost-effective pathways to develop engineering products. This study investigated the efficacy of adding these micromodifiers on the performance characteristics of asphalt binders. In this work, samples were produced using a mixture of slow-setting anionic asphalt emulsion with various combinations of MRP (at 0, 2 and 10 wt %) and four types of CMFs (hydrophobic and hydrophilic with crystalline ratios of 86% and 95%) at 0, 2 and 5 wt %. The performance of modified asphalt samples was assessed by penetration depth (PD), softening point (SP), and penetration index (PI). Linear regression analysis showed that adding CMFs and/or MRP reduced PD and increased SP values. The type of CMFs significantly affected the performance, which becomes more distinct with the increased weight content of CMFs. While hydrophilic CMFs caused increases in SP and PI values, no clear trend was seen to determine the effect of CMF crystallinity. It was also discovered that the combined addition of CMF and MRP achieved similar PI values at lower total weight content compared to using MRP alone.

Sign in / Sign up

Export Citation Format

Share Document