scholarly journals The Electric Current Effect on Electrochemical Deconsolidation of Spherical Fuel Elements

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Xiaotong Chen ◽  
Zhenming Lu ◽  
Hongsheng Zhao ◽  
Bing Liu ◽  
Junguo Zhu ◽  
...  
Keyword(s):  
Electric Current ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive Spectrometer ◽  
Graphite Powder ◽  
X Ray ◽  
Graphite Matrix ◽  
Free Particles ◽  
The Matrix ◽  
Fuel Particles ◽  
Fuel Elements

For High-Temperature Gas-Cooled Reactor in China, fuel particles are bonded into spherical fuel elements by a carbonaceous matrix. For the study of fuel failure mechanism from individual fuel particles, an electrochemical deconsolidation apparatus was developed in this study to separate the particles from the carbonaceous matrix by disintegrating the matrix into fine graphite powder. The deconsolidated graphite powder and free particles were characterized by elemental analysis, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and ceramography. The results showed that the morphology, size distribution, and element content of deconsolidated graphite matrix and free particles were notably affected by electric current intensity. The electrochemical deconsolidation mechanism of spherical fuel element was also discussed.

scholarly journals Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Yang Dang ◽  
Yu Cheng ◽  
Yukun Zhou ◽  
Yifei Huang ◽  
Kaige Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Organic Pollutant ◽  
Energy Dispersive Spectrometer ◽  
Chemical Properties ◽  
Anodic Alumina ◽  
Alumina Substrate ◽  
Reusable Catalyst ◽  
X Ray ◽  
Nanoporous Anodic Alumina

The treatment of organic dye contaminants in wastewaters has now becoming more imperative. Fenton-like degradation of methylene blue (MB) and methyl orange (MO) in aqueous solution was investigated by using a nanostructure that a layer of CuCl2 nanoflake film grown on the top surface of nanoporus anodic alumina substrate (nano-PAA-CuCl2) as catalyst. The new nano-PAA-CuCl2 composite was fabricated with self-assembly approach, that is, a network porous structure film composed of CuCl2 nanoflake grown on the upper surface of nanoporous anodic alumina substrate, and the physical and chemical properties are characterized systematically with the X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and high-resolution transmission electron microscopy (HRTEM), Energy Dispersive Spectrometer (EDS), X-ray photoelectron spectroscopy (XPS). The experimental results showed that the nano-PAA-CuCl2 catalyst presented excellent properties for the degradation of two typical organic pollutants such as MB and MO, which were almost completely degraded with 8 × 10−4mol/L nano-PAA-CuCl2 catalyst after 46 min and 60 min at reaction conditions of H2O2 18 mM and 23 mM, respectively. The effects of different reaction parameters such as initial pH, H2O2 concentration, catalyst morphology and temperature were attentively studied. And more, the stability and reusability of nano-PAA-CuCl2 were examined. Finally, the mechanism of MB and MO degradation by the nano-PAA-CuCl2/H2O2 system was proposed, based on the experimental data of the BCA and the temperature-programmed reduction (H2-TPR) and theoretical analysis, the reaction kinetics belonged to the pseudo-first-order equation. This new nanoporous composite material and preparation technology, as well as its application in Fenton-like reaction, provide an effective alternative method with practical application significance for wastewater treatment.

Study on Temperature Distribution of Pebble-Bed HTR Fuel Element by Using Boundary Element Method

2013 ◽  
Author(s):  
Haitao Wang ◽  
Xin Wang
Keyword(s):  
Fuel Element ◽  
Boundary Element ◽  
Large Scale ◽  
Maximum Temperature ◽  
Element Formulation ◽  
Desktop Computer ◽  
Pebble Bed ◽  
Graphite Matrix ◽  
Fuel Particles ◽  
Fuel Elements

Spherical fuel elements with a diameter of 60mm are basic units of the nuclear fuel for the pebble-bed high temperature gas-cooled reactor (HTR). Each fuel element is treated as a graphite matrix containing around 10,000 randomly distributed fuel particles. The essential safety concept of the pebble-bed HTR is based on the objective that maximum temperature of the fuel particles does not exceed the design value. In this paper, a microstructure-based boundary element model is proposed for the large-scale thermal analysis of a spherical fuel element. This model presents detailed structural information of a large number of coated fuel particles dispersed in a spherical graphite matrix in order that temperature distributions at the level of fuel particles can be evaluated. The model is meshed with boundary elements in conjunction with the fast multipole method (FMM) in order that such large-scale computation is performed only in a personal desktop computer. Taking advantage of the fact that fuel particles are of the same shape, a similar sub-domain approach is used to establish the temperature translation mechanism between various layers of each fuel particle and to simplify the associated boundary element formulation. The numerical results demonstrate large-scale capacity of the proposed method for the multi-level temperature evaluation of the pebble-bed HTR fuel elements.

High Temperature Oxidation Behavior of SUS310S Austenitic Stainless Steel

2014 ◽  
Vol 941-944 ◽  
pp. 212-215
Author(s):  
Tao Zheng ◽  
Jing Tao Han
Keyword(s):  
Photoelectron Spectroscopy ◽  
Oxidation Behavior ◽  
Layer Structure ◽  
Energy Dispersive Spectrometer ◽  
Austenitic Stainless Steels ◽  
Temperature Oxidation ◽  
X Ray ◽  
High Temperature Oxidation Behavior ◽  
High Oxidation Resistance ◽  
Ray Diffusion

The oxidation behavior of SUS310S austenitic stainless steels was studied in isothermal conditions at different temperatures between 800oC and 1100oC for 96h in air. The oxidation kinetics was analyzed, the surface and cross-section of the oxide scale grown by oxidation were characterized by using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), X-ray diffusion (XRD) and X-ray photoelectron spectroscopy (XPS). The SUS310S steel has high oxidation resistance at 800oC and with the increase of the temperature, the parabolic rate constants is constantly increasing. Examination of the morphology and composition of oxide layers reveals a double-layer structure, The inner layer is mainly chromium oxide (Cr2O3) and is covered by an uneven thinness outer layer of manganese-chromium or iron-chromium spinel oxide.

scholarly journals Polyarylene Ether Nitrile and Barium Titanate Nanocomposite Plasticized by Carboxylated Zinc Phthalocyanine Buffer

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 418 ◽  
Author(s):  
Shuning Liu ◽  
Chenchen Liu ◽  
Changyu Liu ◽  
Ling Tu ◽  
Yong You ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Barium Titanate ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive Spectrometer ◽  
Composite Films ◽  
Zinc Phthalocyanine ◽  
Hydroxyl Groups ◽  
X Ray ◽  
Polyarylene Ether Nitrile ◽  
High Dielectric

Barium titanate (BT) and polyarylene ether nitrile (PEN) nanocomposites with enhanced dielectric properties were obtained by using carboxylatedzinc phthalocyanine (ZnPc-COOH) buffer as the plasticizer. Carboxylated zinc phthalocyanine, prepared through hydrolyzing ZnPc in NaOH solution, reacted with the hydroxyl groups on the peripheral of hydrogen peroxide treated BT (BT-OH) yielding core-shell structured BT@ZnPc. Thermogravimetric analysis (TGA), transmission electron microscopy (TEM), TEM energy dispersive spectrometer mapping, scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) demonstrated successful preparation of BT@ZnPc. The fabricated BT@ZnPc was incorporated into the PEN matrix through the solution casting method. Rheological measurements demonstrated that the ZnPc-COOH buffer can improve the compatibility between BT and PEN effectively. With the existence of the ZnPc-COOH buffer, the prepared BT@ZnPc/PEN nanocomposites exhibit a high dielectric constant of 5.94 and low dielectric loss (0.016 at 1000 Hz). BT@ZnPc/PEN dielectric composite films can be easily prepared, presenting great application prospects in the field of organic film capacitors.

Effect of FLiBe Infiltration Pressure on Microstructure of Matrix for TMSR Fuel Elements (FEs)

2017 ◽  
Vol 373 ◽  
pp. 189-192
Author(s):  
Hong Xia Xu ◽  
Jun Lin ◽  
Yu Chen ◽  
Bing Chuan Gu ◽  
Bang Jiao Ye ◽  
...  
Keyword(s):  
Positron Lifetime ◽  
X Ray Diffraction ◽  
X Ray ◽  
Positron Annihilation Lifetime ◽  
Infiltration Pressure ◽  
Matrix Graphite ◽  
The Matrix ◽  
Diffraction Patterns ◽  
Fuel Elements ◽  
Scanning Electron

The matrix graphite of fuel elements (FEs) with infiltration of 2LiF-BeF2(FLiBe) at different pressures varying from 0.4 MPa to 1.0 MPa, has been studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and positron annihilation lifetime (PAL) measurement. The result of XRD reveals that diffraction patterns of FLiBe appear in matrix graphite infiltrated with FLiBe at a pressure of 0.8 MPa and 1.0 MPa. The surface morphology from SEM shows that FLiBe mainly distributes within macro-pores of matrix graphite. PAL measurement indicates that there are mainly two positron lifetime components in all specimens:τ1~0.21 ns and τ2 ­~0.47 ns, ascribed to annihilation of positrons in bulk and trapped-positrons at surface, respectively. The average positron lifetime decreases with infiltration pressure, due to the decrease in annihilation fraction of positrons with surface after infiltration of FLiBe into macro-pores.

Effect of Phosphorus on the Friction and Wear Characteristics of Cu-Sn-P Alloys

1979 ◽  
Vol 101 (2) ◽  
pp. 201-206 ◽  
Author(s):  
Y. Taga ◽  
K. Nakajima
Keyword(s):  
Photoelectron Spectroscopy ◽  
Friction And Wear ◽  
Structural Changes ◽  
Surface Concentration ◽  
Wear Characteristics ◽  
X Ray ◽  
The Matrix ◽  
Pin On Disc ◽  
The Coefficient Of Friction ◽  
Friction And Wear Characteristics

The effects of phosphorus on the friction and wear characteristics of Cu-5 at. percent Sn-P alloys containing 1–5 at. percent P were studied using a pin on disc apparatus. The results showed that the decrease in both the coefficient of friction and the rate of wear became conspicuous with the increase in quantity of Cu3P coexisting in the matrix; its amount increases with the content of phosphorus. The structural changes in the surface of the specimen due to heating in a vacuum were observed by using Auger electron spectroscopy and X-ray photoelectron spectroscopy. It was seen that the surface concentration of phosphorus strongly increased after heating at 573K, whereas the diffusion of tin atoms was markedly retarded. It was concluded from these results that the behavior of phosphorus atoms in the surface during sliding played an important role in the friction and wear characteristics of Cu-Sn-P alloys.

NdFe2O4 Nanoparticles: Synthesis, Characterization, and Magnetic Properties

2020 ◽  
Vol 12 (6) ◽  
pp. 810-814 ◽  
Author(s):  
Xiao-Lei Song ◽  
Yi-Lin Wu ◽  
Si-Ran Zhang ◽  
Zhi Chen ◽  
Yong-Gui Li
Keyword(s):  
Photoelectron Spectroscopy ◽  
Solvothermal Method ◽  
Energy Dispersive Spectrometer ◽  
Reaction Times ◽  
Spherical Particles ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Magnetic Parameters ◽  
Transmission Electron

Multi-structured NdFe2O4 magnetic nanoparticles (NPs) were successfully prepared at different reaction times through a convenient solvothermal method. The microstructure and elemental composition of the NPs were characterized using powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) technique. An energy dispersive spectrometer (EDS) was connected to a scanning electron microscope to determine the weight and atomic percent of the prepared products. Subsequently, high-resolution transmission electron microscopy (HR/TEM) and TEM were performed at 3, 7, 11, and 15 h to elucidate the synthetic mechanism of the rare-earth element Nd doped in Fe3O4. The magnetic activities of the NPs were evaluated using a vibrating sample magnetometer (VSM). XRD, EDS, and XPS analyses show that Nd was successfully doped into Fe3O4 without breaking its crystal structure. Procedural single-crystal nanosheets and final spherical particles of NdFe2O4 were verified by TEM. The magnetic parameters of the products were further analyzed using the VSM.

scholarly journals Improvement of Dispersibility of Graphene Oxide by Surface Modification with Rare Earths

2022 ◽  
Author(s):  
Yong Li ◽  
Zhou Jiang ◽  
Haidong Yu ◽  
Xuebin Zhou ◽  
Peng Yi
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Rare Earth ◽  
Rare Earth Elements ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive Spectrometer ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Modified Graphene ◽  
The Rare Earth

Abstract Rare earth-modified graphene oxide (RE-M-GO) materials were successfully prepared by infiltration and heating modifier method. The morphology and phase structure of RE-M-GO were characterized by scanning electron microscopy(SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive spectrometer(EDS). The changes of the chemical structure were indicated by Fourier transform infrared (FTIR). X-ray photoelectron spectroscopy(XPS) was used to study the chemical state of the surface elements of graphene oxide which showed that the rare earth elements were added to the graphene oxide functional groups through the coordination reaction. Additionally, the findings concluded that the effect of modification by Ce is more obvious than La elements and the RE-M-GO materials prepared by the heating modifier method had better dispersibility than infiltration. With activating effect, the rare earth elements grafting to graphene oxide will contribute to its combination with other materials.

Fabrication of Novel Z-Scheme Bi2WO6/NaBiO3 Nanocomposites with Enhanced Photocatalytic Activity in the Degradation of 2,3-Dichlorophenol

2020 ◽  
Vol 20 (5) ◽  
pp. 3105-3116 ◽  
Author(s):  
Xin-Yue Gu ◽  
Qiu Wang ◽  
Da-Peng Zhang ◽  
Xin-Xiang Geng ◽  
Zhen-Xing Zha ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive Spectrometer ◽  
Energy Levels ◽  
Degradation Process ◽  
Photoelectrochemical Performance ◽  
X Ray ◽  
Oxidative Species

The Z-scheme Bi2WO6/NaBiO3 nanocomposites were first fabricated by a facile hydrothermal method, and were then characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive spectrometer, Fourier-transform-infrared spectroscopy, X-ray photoelectron spectroscopy and N2 adsorption–desorption. The as-prepared Bi2WO6/NaBiO3 nanocomposites exhibit outstanding photocatalytic activity and recyclability. A 98.4% photodegradation of 2,3-dichlorophenol (50 mg·L−1) was attained in the presence of Bi2WO6/NaBiO3 (1:10) under the visible-light irradiation in 30 min. In particular, the photocatalytic mechanism has been discussed in detail, based on four aspects: (1) oxidative species, (2) photoelectrochemical performance, (3) conduction band and valence band energy levels and (4) possible transition states and reactions. In conclusion, O−2 is the main active oxidative species in the Bi2WO6/NaBiO3 nanocomposite. The material has higher photocurrent and visible light adsorption but lower electron–hole pairs recombination, which contributes to distinguished photocatalytic efficiency. The Z-scheme photocatalytic path was proposed and the possible degradation process and routes have been summarized.

Effect of Aging on Super-Elastic Response of a Polycrystalline FeNiCoAlNbB Shape Memory Alloy

2014 ◽  
Vol 787 ◽  
pp. 281-287 ◽  
Author(s):  
Zhao Xia Chen ◽  
Wen Yi Peng ◽  
Gui Li Qu ◽  
Wei Wei Wang ◽  
Hai Ping Shi ◽  
...  
Keyword(s):  
Elastic Strain ◽  
Aging Process ◽  
Energy Dispersive Spectrometer ◽  
Elastic Response ◽  
X Ray Diffraction ◽  
X Ray ◽  
Two Factors ◽  
The Matrix ◽  
Precipitation Phase ◽  
Scanning Electron

This study reports the effect of aging duration on the super-elastic response of Fe-30%Ni-18%Co-10.5%Al-2%Nb-0.15%B (at.%) poly-crystals in compression. The aging temperature was 600°C and the aging durations were 20h, 45h, 60h and 72h, respectively. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) were used in the work. The results show that with prolonging the aging duration, the super-elastic strain rises firstly and then descends. The super-elastic strain reaches the maximum 10.5% when the aging duration is 60h. The crisis stress for stress-induced martensite (σM) has no obvious changes, being about 250MPa when the aging duration is between 20h and 60h. But σM increases markedly when the aging duration prolongs to 72h. The hardness of the specimens changes in the same way as the superelastic strain, and reaches the maximum of 497HV10 when the aging duration is 60h. During the aging process, two factors react. One is the decomposing and reducing in size of the undissolved phase (σ). The other is the formation of the precipitation phase (γ'). Nb can dissolve into the matrix phase (γ) adequately and promote the formation of γ'. The combination of the two factors improves the strength and superelasticity of the specimens till the over-aging arises corresponding to the 72h aging duration.

Sign in / Sign up

Export Citation Format

Share Document