scholarly journals Dynamic Model of Spur Gear Pair with Modulation Internal Excitation

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Zhong Wang ◽  
Lei Zhang ◽  
Yuan-Qing Luo ◽  
Chang-Zheng Chen
Keyword(s):  
Dynamic Model ◽  
Transmission Error ◽  
Spur Gear ◽  
Experimental Result ◽  
Time Varying ◽  
Gear Pair ◽  
Mesh Stiffness ◽  
Gear Mesh ◽  
Internal Excitation ◽  
Modulation Sideband

In the actual measurements, vibration and noise spectrum of gear pair often exhibits sidebands around the gear mesh harmonic orders. In this study, a nonlinear time-varying dynamic model of spur gear pair was established to predict the modulation sidebands caused by the AM-FM modulation internal excitation. Here, backlash, modulation time-varying mesh stiffness, and modulation transmission error are considered. Then the undamped natural mode was studied. Numerical simulation was made to reveal the dynamic characteristic of a spur gear under modulation condition. The internal excitation was shown to exhibit obvious modulation sideband because of the modulation time-varying mesh stiffness and modulation transmission error. The Runge-Kutta method was used to solve the equations for analyzing the dynamic characteristics with the effect of modulation internal excitation. The result revealed that the response under modulation excitation exhibited obvious modulation sideband. The response under nonmodulation condition was also calculated for comparison. In addition, an experiment was done to verify the prediction of the modulation sidebands. The calculated result was consistent with the experimental result.

An Analytical Investigation of Rattle Characteristics of Powder Metal Gears

2019 ◽  
Author(s):  
Elizabeth Slavkovsky ◽  
Murat Inalpolat ◽  
Anders Flodin
Keyword(s):  
Transmission Error ◽  
Analytical Investigation ◽  
Time Varying ◽  
Evaluation Tool ◽  
Mesh Stiffness ◽  
Gear Design ◽  
Gear Mesh ◽  
Internal Excitation ◽  
Gear Mesh Stiffness ◽  
Gear Rattle

Abstract This study employs an analytical model of a gear pair with transverse-torsional dynamics that allows analysis of single-sided, double-sided, and random rattle situations to contrast rattle characteristics of isotropic PM gears with a baseline steel gearset. This model utilizes time-varying gear mesh stiffness and transmission error as the internal excitation sources and time-varying operating torque as an external excitation. The gear rattle performance of PM gears is investigated under different torque conditions and operating speeds. The system kinetic and potential energy is assessed as an evaluation tool that can indicate the severity of different rattle conditions. The dynamic response of two different versions of an existing PM gear design are compared with a baseline traditional steel gear.

Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration

2019 ◽  
Vol 97 (2) ◽  
pp. 1403-1424 ◽  
Author(s):  
Guanghui Liu ◽  
Jun Hong ◽  
Robert G. Parker
Keyword(s):  
Spur Gear ◽  
Time Varying ◽  
Gear Pair ◽  
Mesh Stiffness

Numerical and experimental investigation of a spur gear pair with unloaded static transmission error

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Duncai Lei ◽  
Xiannian Kong ◽  
Siyu Chen ◽  
Jinyuan Tang ◽  
Zehua Hu
Keyword(s):  
Transmission Error ◽  
Spur Gear ◽  
Gear Transmission ◽  
Dynamic Responses ◽  
Gear Pair ◽  
Mesh Stiffness ◽  
Content Type ◽  
High Order Harmonic ◽  
Static Transmission Error ◽  
Harmonic Components

Purpose The purpose of this paper is to investigate the dynamic responses of a spur gear pair with unloaded static transmission error (STE) excitation numerically and experimentally and the influences of the system factors including mesh stiffness, error excitation and torque on the dynamic transmission error (DTE). Design/methodology/approach A simple lumped parameters dynamic model of a gear pair considering time-varying mesh stiffness, backlash and unloaded STE excitation is developed. The STE is calculated from the measured tooth profile deviation under the unloaded condition. A four-square gear test rig is designed to measure and analyze the DTE and vibration responses of the gear pair. The dynamic responses of the gear transmission are studied numerically and experimentally. Findings The predicted numerical DTE matches well with the experimental results. When the real unloaded STE excitation without any approximation is used, the dynamic response is dominated by the mesh frequency and its high order harmonic components, which may not be result caused by the assembling error. The sub-harmonic and super-harmonic resonant behaviors are excited because of the high order harmonic components of STE. It will not certainly prevent the separations of mesh teeth when the gear pair is under the condition of high speed and heavy load. Originality/value This study helps to improve the modeling method of the dynamic analysis of spur gear transmission and provide some reference for the understanding of the influence of mesh stiffness, STE excitation and system torque on the vibration behaviors.

scholarly journals Analysis of Dynamic Characteristics of a Fractional-Order Spur Gear Pair with Internal and External Excitations

2021 ◽  
Author(s):  
Jingyu Hou ◽  
Shaopu Yang ◽  
Qiang Li ◽  
Yongqiang Liu
Keyword(s):  
Frequency Response ◽  
Fractional Order ◽  
Dynamic Characteristics ◽  
Spur Gear ◽  
Nonlinear Frequency ◽  
Time Varying ◽  
Gear Pair ◽  
Mesh Stiffness ◽  
The Impact ◽  
Ihb Method

Abstract The nonlinear frequency response characteristics of a spur gear pair with fractional-order derivative under combined internal and external excitations are investigated based on the incremental harmonic balance (IHB) method. First, a pure torsional vibration model is proposed that contains various complex factors, such as the time-varying mesh stiffness, transmission error, the fluctuation of input torque, backlash. Then, the IHB method is developed to calculate the higher-order approximate solution of the system and the correctness of the results is verified by comparing with numerical simulation results obtained by the Power Series Expansion (PSE) method. Furthermore, the types of various impact situations and their judgment conditions are discussed, and the different impact behaviors are analyzed in detail when w?[0,1.5] by using phase diagrams and amplitude-frequency response curves. The influence of important parameters on the dynamic characteristics of gear pair is analyzed at last. The results indicate that the analytical solution derived by IHB method is sufficiently precise. Significantly, the dynamic characteristics of the system could be effectively controlled by adjusting time-varying mesh stiffness coefficient, the order and coefficient of fractional-order term and the amplitudes of internal excitation or external excitation. As a part of the theory of fractional-order mechanical system, the impact performance of fractional-order gear pair is approached for the first time by analytical method.

scholarly journals Experimental and Theoretical Study of Gear Dynamical Transmission Characteristic Considering Measured Manufacturing Errors

2018 ◽  
Vol 2018 ◽  
pp. 1-20 ◽  
Author(s):  
Fang Guo ◽  
Zongde Fang
Keyword(s):  
Transmission Error ◽  
Helical Gear ◽  
Tooth Surface ◽  
Time Varying ◽  
Mesh Stiffness ◽  
Tooth Contact Analysis ◽  
Gear Mesh ◽  
Manufacturing Errors ◽  
Tooth Modification ◽  
Helical Gear Pair

In the research of gear transmission, the vibration and noise problem has received many concerns all the times. Scholars use tooth modification technique to improve the meshing state of gearings in order to reduce the vibration and noise. However, few of researchers consider the influence of measured manufacturing errors when they do the study of tooth modification. In order to investigate the efficiency of the tooth modification in the actual project, this paper proposes a dynamic model of a helical gear pair including tooth modification and measured manufacturing errors to do a deterministic analysis on the dynamical transmission performance. In this analysis, based on the measured tooth deviation, a real tooth surface (including modification and measured tooth profile error) is fitted by a bicubic B-spline. With the tooth contact analysis (TCA) and loaded tooth contact analysis (LTCA) on the real tooth surface, the loaded transmission error, tooth surface elastic deformation, and load distribution can be determined. Based on the results, the time-varying mesh stiffness and gear mesh impact are computed. Taking the loaded transmission error, measured cumulative pitch error, eccentricity error, time-varying mesh stiffness, and gear mesh impact as the internal excitations, this paper establishes a 12-degree-of-freedom (DOF) dynamic model of a helical gear pair and uses the Fourier series method to solve it. In two situations of low speed and high speed, the gear system dynamic response is analyzed in the time and frequency domains. In addition, an experiment is performed to validate the simulation results. The study shows that the proposed technique is useful and reliable for predicting the dynamic response of a gear system.

Sign in / Sign up

Export Citation Format

Share Document