scholarly journals Numerical Research on Flow Characteristics around a Hydraulic Turbine Runner at Small Opening of Cylindrical Valve

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Zhenwei Mo ◽  
Juliang Xiao ◽  
Gang Wang
Keyword(s):  
Flow Velocity ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Hydraulic Turbine ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Small Opening ◽  
Turbine Runner ◽  
Computational Fluid Dynamics Cfd

We use the continuity equation and the Reynolds averaged Navier-Stokes equations to study the flow-pattern characteristics around a turbine runner for the small-opening cylindrical valve of a hydraulic turbine. For closure, we adopt the renormalization-groupk-εtwo-equation turbulence model and use the computational fluid dynamics (CFD) software FLUENT to numerically simulate the three-dimensional unsteady turbulent flow through the entire passage of the hydraulic turbine. The results show that a low-pressure zone develops around the runner blades when the cylindrical valve is closed in a small opening; cavitation occurs at the blades, and a vortex appears at the outlet of the runner. As the cylindrical valve is gradually closed, the flow velocity over the runner area increases, and the pressure gradient becomes more significant as the discharge decreases. In addition, the fluid flow velocity is relatively high between the lower end of the cylindrical valve and the base, so that a high-velocity jet is easily induced. The calculation and analysis provide a theoretical basis for improving the performance of cylindrical-valve operating systems.

Viscous Flow Analysis as a Design Tool for Hydraulic Turbine Components

1990 ◽  
Vol 112 (1) ◽  
pp. 5-11 ◽  
Author(s):  
T. C. Vu ◽  
W. Shyy
Keyword(s):  
Viscous Flow ◽  
Stokes Equations ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Hydraulic Turbine ◽  
Design Tool ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Alternative Designs

Viscous flow analysis based on the full Reynolds-averaged Navier-Stokes equations is being applied to successfully predict turbulent flow characteristics and energy losses in different hydraulic turbine components. It allows the designer to evaluate the hydraulic performance of alternative designs before proceeding with laboratory testing or to perform elaborate parametric study to optimize the hydraulic design. In this paper, the applications of three-dimensional viscous flow analysis as an analytical design tool for elbow draft tube and spiral casing are presented and their impact on engineering design assessed.

Numerical Investigation of the Effect of Balancing-Hole on the Axial Force of a Partial Emission Pump

2014 ◽  
Author(s):  
Zhang Lisheng ◽  
Jiang Jin ◽  
Xiao Zhihuai ◽  
Li Yanhui
Keyword(s):  
Axial Force ◽  
Stokes Equations ◽  
Dominant Role ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Design Parameters ◽  
Navier Stokes Equations ◽  
Computational Fluid Dynamics Cfd ◽  
The Cost

In this paper numerical simulations were conducted to analyze the effects of design parameters and distribution of balancing-hole on the axial-force of a partial emission pump. The studied pump is a single stage pump with a Barske style impeller. Based on the original impeller, we designed 7 pumps with different balancing-hole diameters and the partial emission pump equipped with different impellers were simulated employing the commercial computational fluid dynamics (CFD) software Fluent 12.1 to solve the Navier-Stokes equations for three-dimensional steady flow. A sensitivity analysis of the numerical model was performed with the purpose of balancing the contradiction of numerical accuracy and the cost of calculation. The results showed that, with increasing of the capacity, the axial force varies little. The diameter of the inner balancing-hole plays a dominant role of reducing axial-force of partial emission pump, the axial-force decreases with increasing of inner balancing-hole diameter on the whole range of operation, the axial-force of impeller without inner balancing-hole is approximately 3 times larger than that of impeller with inner balancing-hole. While the diameter of outer balancing-hole has a reverse effects compared with that of inner balancing-hole. With increasing of outer balancing-hole, the axial force increases accordingly.

Effect of Blade Numbers on Pressure Drop of Axial Cyclone Separators by CFD

2011 ◽  
Vol 55-57 ◽  
pp. 343-347 ◽  
Author(s):  
Yi Gang Luan ◽  
Hai Ou Sun
Keyword(s):  
Pressure Drop ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Three Dimensional Model ◽  
Navier Stokes Equations ◽  
Pressure Drops ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method ◽  
Resistance Performance

In this article, computational fluid dynamics(CFD) method is used to predict the effect of blade numbers on the pressure drop of axial cyclone separators. A three-dimensional model is built to acquire the resistance of axial cyclone separators with different blade numbers. The flow field inside cyclone separators is calculated using 3D Reynolds-averaged Navier-Stokes equations. And turbulence model is used to simulate the Reynold stress. Also pressure drop of cyclone separators with different blade numbers is expressed as a function of different inlet velocities. At the same inlet velocity with increasing the blade numbers, pressure drops of cyclones reduce greatly. And changing the blade number of cyclone separator is an effective method to improve its resistance performance.

scholarly journals Effect of Impeller Parameters on the Flow inside the Centrifugal Blower using CFD

2020 ◽  
Vol 8 (6) ◽  
pp. 3977-3980
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Control Volume ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Computational Domain ◽  
Centrifugal Blower ◽  
Impeller Blade ◽  
Navier Stokes Equations

A numerical analysis is carried out to understand the flow characteristics for different impeller configurations of a single stage centrifugal blower. The volute design is based on constant velocity method. Four different impeller configurations are selected for the analysis. Impeller blade geometry is created with point by point method. Numerical simulation is carried out by CFD software GAMBIT 2.4.6 and FLUENT 6.3.26. GAMBIT work includes geometry definition and grid generation of computational domain. This process includes selection of grid types, grid refinements and defining correct boundary conditions. Processing work is carried out in FLUENT. The viscous Navier-Stokes equations are solved with control volume approach and the k-ε turbulence model. In this three dimensional numerical analysis is carried out with steady flow approach. The rotor and stator interaction is solved by mixing plane approach. Results of simulation are presented in terms of flow parameters, at impeller outlet and various angular positions inside the volute. Also, the contours of flow properties are presented at the outlet plane of fluid domain. Results suggest that for the same configurations of centrifugal blower, as we change geometrical parameter of impeller the flow inside the blower get affected.

Numerical Study on the Flow Characteristics of the Francis Turbine With Various Blade Profiles

2013 ◽  
Author(s):  
J.-H. Jeon ◽  
S.-S. Byeon ◽  
Y.-J. Kim
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Francis Turbine ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Ansys Cfx ◽  
Commercial Code ◽  
Sst Turbulence Model

The Francis turbine is a kind of reaction turbines, which means that the potential energy of water converted to rotational kinetic energy. In this study, the flow characteristics have been investigated numerically in a Francis turbine on the 15 MW hydropower generation with various blade profiles (NACA 65 and NACA 16 series) and discharge angles (14°, 15°, 17°, and 18°), using the commercial code, ANSYS CFX. The k-ω SST turbulence model is employed in the Reynolds averaged Navier-Stokes equations. The computing domain includes the spiral casing, guide vanes, and draft tube, which are discretized with a full three-dimensional mesh system of unstructured tetrahedral shapes. The results showed that the change of blade profiles and discharge angles significantly influenced the performance of the Francis turbine.

Calculation of Turbulent Flows in a Hydraulic Turbine Draft Tube

1990 ◽  
Vol 112 (3) ◽  
pp. 257-263 ◽  
Author(s):  
M. Agouzoul ◽  
M. Reggio ◽  
R. Camarero
Keyword(s):  
Turbulent Flows ◽  
Stokes Equations ◽  
Draft Tube ◽  
Three Dimensional ◽  
Hydraulic Turbine ◽  
Navier Stokes ◽  
Pressure Gradients ◽  
Navier Stokes Equations ◽  
Conservative Form ◽  
Hydraulic Turbine Draft Tube

A numerical method to simulate three-dimensional incompressible turbulent flows has been developed and applied to the calculation of various flow situations in a draft tube. The conservative form of the primitive-variable formulation of the Reynolds averaged Navier-Stokes equations, written for a general curvilinear co-ordinate system, is employed. An overlapping grid combined with opposed differencing for mass and pressure gradients is used. All the properties are stored at the center of the same computational cell which is used for mass and transport balances. The k–ε model is used to describe the turbulent flow. The boundary conditions for the turbulent properties are treated with a particular attention.

A Numerical Examination of the Inkjet Refilling

2004 ◽  
Author(s):  
Kai-Shing Yang ◽  
Ing-Young Chen ◽  
Chi-Chuan Wang
Keyword(s):  
Dynamic Viscosity ◽  
Bubble Growth ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Plane Boundary ◽  
Navier Stokes Equations ◽  
Numerical Examination

A numerical study is conducted to examine the flow characteristics of the inkjet print-head with special attentions on the refilling process. By solving the full set of three-dimensional transient Navier-Stokes equations and considering the process of bubble growth and collapse as a movable membrane, it is found that the double refilling channels can reduce the flow surge phenomenon considerably due to the imposed friction. However, for the additional cylinder obstacle placed at the filling channel, the flow surge phenomenon is still present. This is because of the jet-like flow along the cylinder leading to a collision and eruption of fluid angled towards the plane boundary with the presence of cylinder. The calculated results also indicated the flow surge can be moderately suppressed for fluid having larger dynamic viscosity.

Particulates Depositions in Patient-Specific Simulations of Respiratory System

2014 ◽  
Author(s):  
Shahab Taherian ◽  
Hamid Rahai ◽  
Bernardo Z. Gomez ◽  
Thomas Waddington
Keyword(s):  
Respiratory System ◽  
Stokes Equations ◽  
Flow Characteristics ◽  
Bronchial Tree ◽  
Navier Stokes ◽  
Patient Specific ◽  
Navier Stokes Equations ◽  
Computational Fluid Dynamics Cfd ◽  
Upper Respiratory ◽  
The Relationship

Ambient particulates depositions have major impacts on respiratory functions. Patient-specific simulations of the respiratory system of a patient were performed to investigate the relationship between the flow characteristics and particulate depositions in the upper respiratory domain. CT scan images were imported to create a 3D model of the bronchial tree and then transferred to a computational fluid dynamics (CFD) software for simulation. Appropriate boundary conditions were assigned to simulate the sinusoidal behavior of the normal breathing cycle with the corresponding pressures at the outlets. Lagrangian phase model was used to simulate the micron solid round particulates transport and depositions. The simulations were performed for 2.5 micron and 10 micron particles. The implicit-unsteady Reynolds Averaged Navier-Stokes equations with K-ω turbulence model were used for these simulations. Results indicate high correlation between regions of high vortices, secondary flow and high wall shear stress and particulate depositions. The total deposition number for 10-micron particles was higher than that for the 2.5-micron particles. The differences in the locations of depositions at various generations of the lung illustrate the importance of the patient-specific simulations.

scholarly journals Three-Dimensional Separations in Axial Compressors

2005 ◽  
Vol 127 (2) ◽  
pp. 331-339 ◽  
Author(s):  
Semiu A. Gbadebo ◽  
Nicholas A. Cumpsty ◽  
Tom P. Hynes
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Tip Clearance ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Compressor Blades ◽  
Navier Stokes Equations ◽  
Axial Compressors ◽  
Computational Fluid Dynamics Cfd ◽  
Limiting Streamlines

Flow separations in the corner regions of blade passages are common. The separations are three dimensional and have quite different properties from the two-dimensional separations that are considered in elementary courses of fluid mechanics. In particular, the consequences for the flow may be less severe than the two-dimensional separation. This paper describes the nature of three-dimensional (3D) separation and addresses the way in which topological rules, based on a linear treatment of the Navier-Stokes equations, can predict properties of the limiting streamlines, including the singularities which form. The paper shows measurements of the flow field in a linear cascade of compressor blades and compares these to the results of 3D computational fluid dynamics (CFD). For corners without tip clearance, the presence of three-dimensional separation appears to be universal, and the challenge for the designer is to limit the loss and blockage produced. The CFD appears capable of predicting this.

Numerical Simulations of Three-Dimensional Flows in a Cubic Cavity With an Oscillating Lid

1993 ◽  
Vol 115 (4) ◽  
pp. 680-686 ◽  
Author(s):  
Reima Iwatsu ◽  
Jae Min Hyun ◽  
Kunio Kuwahara
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Time Dependent ◽  
Navier Stokes ◽  
Physical Parameters ◽  
Navier Stokes Equations ◽  
Sinusoidal Oscillations ◽  
Dependent Flow

Numerical studies are made of three-dimensional flow of a viscous fluid in a cubical container. The flow is driven by the top sliding wall, which executes sinusoidal oscillations. Numerical solutions are acquired by solving the time-dependent, three-dimensional incompressible Navier-Stokes equations by employing very fine meshes. Results are presented for wide ranges of two principal physical parameters, i.e., the Reynolds number, Re ≤ 2000 and the frequency parameter of the lid oscillation, ω′ ≤ 10.0. Comprehensive details of the flow structure are analyzed. Attention is focused on the three-dimensionality of the flow field. Extensive numerical flow visualizations have been performed. These yield sequential plots of the main flows as well as the secondary flow patterns. It is found that the previous two-dimensional computational results are adequate in describing the main flow characteristics in the bulk of interior when ω′ is reasonably high. For the cases of high-Re flows, however, the three-dimensional motions exhibit additional complexities especially when ω′ is low. It is asserted that, thanks to the recent development of the supercomputers, calculation of three-dimensional, time-dependent flow problems appears to be feasible at least over limited ranges of Re.

Sign in / Sign up

Export Citation Format

Share Document