scholarly journals The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Hainian Wang ◽  
Yin Bu ◽  
Yanzhe Wang ◽  
Xu Yang ◽  
Zhanping You
Keyword(s):  
Fractal Dimension ◽  
High Temperature ◽  
Los Angeles ◽  
Coarse Aggregate ◽  
Asphalt Mixture ◽  
Great Influence ◽  
Asphalt Mixtures ◽  
Morphological Properties ◽  
Coarse Aggregates ◽  
Temperature Performance

The morphological properties of coarse aggregates, such as shape, angularity, and surface texture, have a great influence on the mechanical performance of asphalt mixtures. This study aims to investigate the effect of coarse aggregate morphological properties on the high-temperature performance of asphalt mixtures. A modified Los Angeles (LA) abrasion test was employed to produce aggregates with various morphological properties by applying abrasion cycles of 0, 200, 400, 600, 800, 1000, and 1200 on crushed angular aggregates. Based on a laboratory-developed Morphology Analysis System for Coarse Aggregates (MASCA), the morphological properties of the coarse aggregate particles were quantified using the index of fractal dimension. The high-temperature performances of the dense-graded asphalt mixture (AC-16), gap-graded stone asphalt mixture (SAC-16), and stone mastic asphalt (SMA-16) mixtures containing aggregates with different fractal dimensions were evaluated through the dynamic stability (DS) test and the penetration shear test in laboratory. Good linear correlations between the fractal dimension and high-temperature indexes were obtained for all three types of mixtures. Moreover, the results also indicated that higher coarse aggregate angularity leads to stronger high-temperature shear resistance of asphalt mixtures.

Comparison of Test Methods for High-Temperature Performance of Asphalt Mixtures

2013 ◽  
Vol 361-363 ◽  
pp. 1629-1634 ◽  
Author(s):  
Guo Xiong Wu ◽  
Xiao Ke Zhang ◽  
Rui Lin Wang
Keyword(s):  
Elastic Modulus ◽  
High Temperature ◽  
Shear Test ◽  
Asphalt Mixture ◽  
Test Methods ◽  
Asphalt Mixtures ◽  
Penetration Test ◽  
Shear Elastic Modulus ◽  
Temperature Performance ◽  
Slant Shear

Through a comparative study of high-temperature asphalt mixture performance by three methods: the standard rutting test, uniaxial penetration test on cylindrical specimens, and slant shear test, this paper displays that the shear elastic modulus gained by both cylindrical uniaxial penetration test and slant shear test can reflect well the properties of shear deformation of asphalt mixture under high temperature. However, there are certain limitations in these test methods.

scholarly journals Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4910
Author(s):  
Ping Zhang ◽  
Lan Ouyang ◽  
Lvzhen Yang ◽  
Yi Yang ◽  
Guofeng Lu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Carbon Black ◽  
Influencing Factors ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil

As environmentally friendly materials, carbon black and bio-oil can be used as modifiers to effectively enhance the poor high-temperature and low-temperature performance of base asphalt and its mixture. Different carbon black and bio-oil contents and shear time were selected as the test influencing factors in this work. Based on the Box–Behnken design (BBD), carbon black/bio-oil composite modified asphalt was prepared to perform the softening point, penetration, multiple stress creep and recovery (MSCR), and bending beam rheometer (BBR) tests. The response surface method (RSM) was used to analyze the test results. In addition, the base asphalt mixtures and the optimal performance carbon black/bio-oil composite modified asphalt mixtures were formed for rutting and low-temperature splitting tests. The results show that incorporating carbon black can enhance the asphalt’s high-temperature performance by the test results of irrecoverable creep compliance (Jnr) and strain recovery rate (R). By contrast, the stiffness modulus (S) and creep rate (M) test results show that bio-oil can enhance the asphalt’s low-temperature performance. The quadratic function models between the performance indicators of carbon black/bio-oil composite modified asphalt and the test influencing factors were established based on the RSM. The optimal performance modified asphalt mixture’s carbon black and bio-oil content was 15.05% and 9.631%, and the shear time was 62.667 min. It was revealed that the high-temperature stability and low-temperature crack resistance of the carbon black/bio-oil composite modified asphalt mixture were better than that of the base asphalt mixture because of its higher dynamic stability (DS) and toughness. Therefore, carbon black/bio-oil composite modified asphalt mixture can be used as a new type of choice for road construction materials, which is in line with green development.

scholarly journals High-Temperature Performance of Asphalt Mixtures: Preliminary Analysis for the Standard Technical Index Based on Gray Relational Analysis Method

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jian Xu ◽  
Yan Gong ◽  
Li-Biao Chen ◽  
Tao Ma ◽  
Jun-Cheng Zeng ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Gray Relational Analysis ◽  
Low Grade ◽  
Modified Asphalt ◽  
Relational Analysis ◽  
Temperature Performance

Aiming to evaluate the high-temperature performance of asphalt binders and asphalt mixtures and to investigate the reliability of the standard technical indexes to evaluate the performance of the asphalt, six typically used asphalt types were employed in this study. The standard high-temperature rheological test, the multiple stress creep recovery (MSCR) test, and the zero-shear viscosity (ZSV) test were employed to characterize the high-temperature performance and non-Newtonian fluid properties of the asphalt. Meanwhile, the high-temperature performance of the asphalt mixture was evaluated through the rutting tests based on the mixture design of AC-13. In general, the modified asphalt performed better than the unmodified asphalt according to the high-temperature rheological properties tests. The ranking of the six kinds of asphalt was confirmed to be different in various laboratory tests. The test results of the asphalt binders showed that the Tafpack Super- (TPS-) modified asphalt performed best in the MSCR and ZSV tests, while the low-grade asphalt PEN20 had the best technical indexes in the dynamic shear rheometer (DSR) test. Besides, the relation between the asphalt and the asphalt mixture was analyzed by gray relational analysis (GRA) method. The present rutting indicator G ∗ / sin   δ  and  G ∗ / 1 − sin   δ ⋅   tan   δ − 1 for evaluating the asphalt mixtures’ high-temperature performance might no longer be suitable. The Cross/Williamson model was the most suitable for calculating and fitting the ZSV, which could be used as the key indicator of the high-temperature performance evaluation of the asphalt. This work lays a foundation for the further study of the high-temperature performance evaluation of asphalt binders.

scholarly journals High-Temperature Performance of Polymer-Modified Asphalt Mixes: Preliminary Evaluation of the Usefulness of Standard Technical Index in Polymer-Modified Asphalt

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1404 ◽  
Author(s):  
Kezhen Yan ◽  
Lingyun You ◽  
Daocheng Wang
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Creep Recovery ◽  
Preliminary Evaluation ◽  
Zero Shear Viscosity ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Fluid Properties ◽  
Polymer Modified Asphalt

The objectives of this study are to evaluate the high-temperature performance of polymer-modified asphalt and asphalt mixtures, and to investigate if the standard technical indexes are useful in the performance evaluation of the polymer-modified asphalt. There are four typically used polymer-modified asphalt types employed in the study. The standard high-temperature rheological test, such as the temperature sweep test, was used to express the high-temperature performance of the polymer-modified asphalt. Also, considering the non-Newtonian fluid properties of the polymer-modified asphalt, the multiple stress creep recovery (MSCR) and zero-shear viscosity (ZSV) tests were employed for the characterizations. Besides, based on the mixture design of SMA-13, the high temperature of the polymer-modified asphalt mixture was evaluated via Marshall stability and rutting tests. The test results concluded that the ranking of the four kinds of polymer-modified asphalt was different in various laboratory tests. The TB-APAO has the best technical indexes in MSCR and ZSV tests, while the WTR-APAO performed best in the temperature sweep test. In addition, the correlation between the polymer-modified asphalt and the asphalt mixture was very poor. Thus, the present standard technical indexes for the profoundly polymer-modified asphalt mixtures are no longer suitable.

Relationship of High-Temperature Performance and Aggregate Gradation of Asphalt Mixtures Based on Fractal Theory

2012 ◽  
Vol 204-208 ◽  
pp. 3795-3798 ◽  
Author(s):  
Jing Bo Huang ◽  
Xun Yu
Keyword(s):  
Fractal Dimension ◽  
High Temperature ◽  
Fractal Theory ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
High Temperature Stability ◽  
Aggregate Gradation ◽  
Fractal Characteristics ◽  
Relationship Of

Fractal theory was introduced to study the asphalt mixture aggregate gradation which shows visible fractal characteristics, and the fractal dimension of seven different gradations of ATB-25 were calculated quantitatively. Then the rutting test was carried out, and the results show that the fractal dimension of aggregate gradation has a good correlation with the dynamic stability of asphalt mixture. Finally, the paper proposes a multiple linear regression formula which may more accurately predict the high-temperature stability of the asphalt mixture with different gradations.

scholarly journals Laboratory Evaluation of the Use of Florida Washed Shell in Open-Graded Asphalt Mixtures

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7060
Author(s):  
Mohammad Alharthai ◽  
Qing Lu ◽  
Ahmed Elnihum ◽  
Asad Elmagarhe
Keyword(s):  
Tensile Strength ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Void Content ◽  
Coarse Aggregates ◽  
Significant Difference ◽  
Indirect Tensile ◽  
Marshall Stability

This study investigates the substitution of conventional aggregate with a Florida washed shell in open-graded asphalt mixtures and evaluates the optimal substitution percentage in aggregate gradations of various nominal maximum aggregate sizes (NMASs) (i.e., 4.75, 9.5, and 12.5 mm). Laboratory experiments were performed on open-graded asphalt mixture specimens with the coarse aggregate of sizes between 2.36 and 12.5 mm being replaced by the Florida washed shell at various percentages (0, 15, 30, 45, and 100%). Specimen properties relevant to the performance of open-graded asphalt mixtures in the field were tested, evaluated, and compared. Specifically, a Marshall stability test, Cantabro test, indirect tensile strength test, air void content test, and permeability test were conducted to evaluate the strength, resistance to raveling, cracking resistance, void content, and permeability of open-graded asphalt mixtures. The results show that there is no significant difference in the Marshall stability and indirect tensile strength when the coarse aggregates are replaced with Florida washed shell. This study also found that the optimum percentages of Florida washed shell in open-graded asphalt mixture were 15, 30, and 45% for 12.5, 9.5, and 4.75 mm NMAS gradations, respectively.

Experimental Analysis of Dynamic Modulus and Phase Angle of High Modulus Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 4220-4225
Author(s):  
Rui Bo Ren ◽  
Li Tao Geng ◽  
Li Zhi Wang ◽  
Peng Wang
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Asphalt Mixtures ◽  
Testing System ◽  
High Modulus ◽  
Temperature Performance ◽  
Different Temperatures ◽  
Confining Pressures

To study the mechanical properties of high modulus asphalt mixtures, dynamic modulus and phase angle of these two mixtures are tested with Simple Performance Testing System under different temperatures, loading frequencies and confining pressures. Testing results show the superiority of high modulus asphalt mixture in aspect of high temperature performance. Furthermore, the changing rules of dynamic modulus and phase angle are also discussed.

Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture

2013 ◽  
Vol 477-478 ◽  
pp. 1175-1178
Author(s):  
Ling Zou ◽  
Jing Wei Ne ◽  
Weng Gang Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Water Stability ◽  
Modified Asphalt ◽  
Modifying Agent ◽  
Temperature Performance ◽  
Splitting Test ◽  
Low Temperature Performance

70# and 90# matrix asphalt mixture with MaR were studied through dynamic modulus test, rutting test, freeze-thaw splitting test, bending test to study the applicability of the Modifying agent of rubber plastic compound (MaR) in matrix asphalt mixture.Test results were Compared with SBSI-C modified asphalt mixture.The results indicate that: high-temperature stability of MaR+70# asphalt mixture is as well as SBSI-C modified asphalt mixture,and is bettere than MaR+90# asphalt mixture; water stability of MaR+90# asphalt mixture is bettere than SBSI-C modified asphalt mixture and MaR+70# asphalt mixture; low temperature performance of MaR+90# asphalt mixture is bettere than MaR+70# asphalt mixture, but is worse than modified asphalt mixture SBSI-C ; MaR+70# asphalt mixture can be first used in area of resisting high temperature and rutting, MaR+90# asphalt mixture can be used if the water stability performance and low temperature performance are considered.

RAP Percentage and Warm Mix Additive Influence on Regenerated Asphalt Mixture Performance

2012 ◽  
Vol 251 ◽  
pp. 436-441 ◽  
Author(s):  
Wei Liu
Keyword(s):  
Adverse Effect ◽  
High Temperature ◽  
Low Temperature ◽  
Adverse Effects ◽  
Production Process ◽  
Asphalt Mixture ◽  
Economical Efficiency ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Additive Influence

The warm mix regeneration technology has prominent economical efficiency that can not only reduce the secondary aging of new asphalt and old asphalt in RAP materials during the production process, but also improve the use proportion of RAP materials. As for the increase of RAP dosage and the warm mix additive added to influence the plant regenerated asphalt mixture performance, this paper adopts two kinds of warm mix additive for the test and analysis of the warm mix regenerated asphalt mixture performance with 20% and 60% RAP. The results indicate that magnify the proportion of RAP percentage makes contribution to further improve high-temperature performance of the regenerated mixture, but it has adverse effects on water resistant damage performance and low-temperature performance. At the same time, adopting the warm mix additive can significantly reduce the adverse effect, so warm mix regenerated technology has better feasibility.

Sign in / Sign up

Export Citation Format

Share Document